! Started logfile: /scr/pima/bg219i_uvs/J1608+4012_X_uvs.log on Wed Apr  6 23:49:26 2016
obs /scr/pima/bg219i_uvs/J1608+4012_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1608+4012_X_uva.fits
! AN table 1: 26 integrations on 28 of 28 possible baselines.
! AN table 2: 26 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.942909 visibilities/baseline/integration-bin.
! Found source: J1608+4012
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18828 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1608+4012_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 16 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.014472Jy  sigma=25.152671
! Fit after  self-cal, rms=0.795855Jy  sigma=19.716874
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7173 mas, bmaj=1.152 mas, bpa=-10.44 degrees
! Estimated noise=0.549723 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155926 Jy
! Component: 100  -  total flux cleaned = 0.198717 Jy
! Total flux subtracted in 100 components = 0.198717 Jy
! Clean residual min=-0.006325 max=0.015919 Jy/beam
! Clean residual mean=-0.000002 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 0.198717 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.198717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061470Jy  sigma=1.455080
! Fit after  self-cal, rms=0.061416Jy  sigma=1.453510
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154639 Jy
! Component: 100  -  total flux cleaned = 0.0218096 Jy
! Total flux subtracted in 100 components = 0.0218096 Jy
! Clean residual min=-0.003960 max=0.003923 Jy/beam
! Clean residual mean=-0.000001 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.220527 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.220527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058040Jy  sigma=1.360585
! Fit after  self-cal, rms=0.058038Jy  sigma=1.360336
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9536 mas, bmaj=1.427 mas, bpa=-8.121 degrees
! Estimated noise=0.290946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206008 Jy
! Component: 100  -  total flux cleaned = 0.00226247 Jy
! Component: 150  -  total flux cleaned = 0.00226599 Jy
! Component: 200  -  total flux cleaned = 0.00230061 Jy
! Total flux subtracted in 200 components = 0.00230061 Jy
! Clean residual min=-0.002339 max=0.002212 Jy/beam
! Clean residual mean=-0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.222827 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.222827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057950Jy  sigma=1.357587
! Fit after  self-cal, rms=0.057948Jy  sigma=1.357560
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9536 x 1.427 at -8.121 degrees (North through East)
! Clean map  min=-0.0022021  max=0.20393 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     KP        0.99     LA        1.00     
!   MK        1.01     OV        0.97     PT        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        0.98     KP        1.00     LA        1.01     
!   MK        1.02     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        1.00     LA        0.98     
!   MK        1.03     OV        1.01     PT        0.97     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     HN        1.01     KP        1.00     LA        1.00     
!   MK        1.00     NL        1.02     OV        0.99     PT        1.01     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     KP        1.00     LA        0.97     
!   MK        1.00     OV        0.95     PT        0.99     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.08     HN        0.98     KP        1.03     LA        1.00     
!   MK        0.98     NL        1.03     OV        0.96     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        1.00     LA        0.98     
!   MK        1.01     OV        0.99     PT        1.00     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     HN        1.00     KP        1.00     LA        0.99     
!   MK        0.98     NL        1.03     OV        0.96     PT        1.00     
!   SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     KP        1.02     LA        1.00     
!   MK        0.97     OV        0.99     PT        0.99     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     HN        0.98     KP        1.03     LA        1.00     
!   MK        0.98     NL        1.02     OV        0.98     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        1.02     LA        0.97     
!   MK        1.00     OV        0.96     PT        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.02     KP        1.00     LA        1.00     
!   MK        0.98     NL        1.00     OV        0.97     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     KP        1.02     LA        0.97     
!   MK        0.99     OV        0.94     PT        1.00     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     HN        1.00     KP        1.04     LA        0.95     
!   MK        1.01     NL        1.01     OV        0.95     PT        1.02     
!   SC        1.01     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057948Jy  sigma=1.357560
! Fit after  self-cal, rms=0.057786Jy  sigma=1.347690
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9535 mas, bmaj=1.428 mas, bpa=-8.1 degrees
! Estimated noise=0.290445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000335179 Jy
! Component: 100  -  total flux cleaned = -0.000373009 Jy
! Component: 150  -  total flux cleaned = -0.000389412 Jy
! Component: 200  -  total flux cleaned = -0.000433106 Jy
! Total flux subtracted in 200 components = -0.000433106 Jy
! Clean residual min=-0.001610 max=0.001740 Jy/beam
! Clean residual mean=-0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.222394 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.222394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057773Jy  sigma=1.347422
! Fit after  self-cal, rms=0.057783Jy  sigma=1.347374
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057783Jy  sigma=1.347374
! Fit after  self-cal, rms=0.057808Jy  sigma=1.347349
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9536 mas, bmaj=1.429 mas, bpa=-8.15 degrees
! Estimated noise=0.290517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115838 Jy
! Component: 100  -  total flux cleaned = -0.000145092 Jy
! Component: 150  -  total flux cleaned = -0.00019624 Jy
! Component: 200  -  total flux cleaned = -0.000242536 Jy
! Total flux subtracted in 200 components = -0.000242536 Jy
! Clean residual min=-0.001594 max=0.001749 Jy/beam
! Clean residual mean=-0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.222152 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 24 components and 0.222152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057801Jy  sigma=1.347209
! Fit after  self-cal, rms=0.057800Jy  sigma=1.347203
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48, 24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014258 Jy
! Component: 100  -  total flux cleaned = 0.00171996 Jy
! Component: 150  -  total flux cleaned = 0.00181542 Jy
! Component: 200  -  total flux cleaned = 0.00183638 Jy
! Total flux subtracted in 200 components = 0.00183638 Jy
! Clean residual min=-0.001560 max=0.001373 Jy/beam
! Clean residual mean=-0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.223988 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.223988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057758Jy  sigma=1.346249
! Fit after  self-cal, rms=0.057756Jy  sigma=1.346203
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057756Jy  sigma=1.346203
! Fit after  self-cal, rms=0.057769Jy  sigma=1.346144
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9535 mas, bmaj=1.429 mas, bpa=-8.139 degrees
! Estimated noise=0.290488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282505 Jy
! Component: 100  -  total flux cleaned = 0.000283387 Jy
! Component: 150  -  total flux cleaned = 0.000282873 Jy
! Component: 200  -  total flux cleaned = 0.000282316 Jy
! Total flux subtracted in 200 components = 0.000282316 Jy
! Clean residual min=-0.001510 max=0.001436 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.22427 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.22427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057759Jy  sigma=1.345933
! Fit after  self-cal, rms=0.057759Jy  sigma=1.345927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.30789e-05 Jy
! Component: 100  -  total flux cleaned = 2.60144e-05 Jy
! Component: 150  -  total flux cleaned = 2.6783e-05 Jy
! Component: 200  -  total flux cleaned = 2.63508e-05 Jy
! Total flux subtracted in 200 components = 2.63508e-05 Jy
! Clean residual min=-0.001478 max=0.001436 Jy/beam
! Clean residual mean=-0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.224297 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 43 components and 0.224297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057754Jy  sigma=1.345822
! Fit after  self-cal, rms=0.057753Jy  sigma=1.345820
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057753Jy  sigma=1.345820
! Fit after  self-cal, rms=0.057768Jy  sigma=1.345809
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.468 mas, bmaj=2.762 mas, bpa=-63.6 degrees
! Estimated noise=0.367805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.50914e-05 Jy
! Component: 100  -  total flux cleaned = 0.000121913 Jy
! Component: 150  -  total flux cleaned = 0.000152761 Jy
! Component: 200  -  total flux cleaned = 0.000161897 Jy
! Total flux subtracted in 200 components = 0.000161897 Jy
! Clean residual min=-0.001640 max=0.001590 Jy/beam
! Clean residual mean=-0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.224459 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 48 components and 0.224459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057768Jy  sigma=1.345795
! Fit after  self-cal, rms=0.057767Jy  sigma=1.345787
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.35891e-05 Jy
! Component: 100  -  total flux cleaned = 7.94969e-05 Jy
! Component: 150  -  total flux cleaned = 8.69068e-05 Jy
! Component: 200  -  total flux cleaned = 8.68768e-05 Jy
! Total flux subtracted in 200 components = 8.68768e-05 Jy
! Clean residual min=-0.001620 max=0.001597 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.224545 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 49 components and 0.224546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057768Jy  sigma=1.345815
! Fit after  self-cal, rms=0.057768Jy  sigma=1.345813
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9535 mas, bmaj=1.429 mas, bpa=-8.148 degrees
! Estimated noise=0.290529 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9535 x 1.429 at -8.148 degrees (North through East)
! Clean map  min=-0.0012575  max=0.2041 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7176 mas, bmaj=1.154 mas, bpa=-10.56 degrees
! Estimated noise=0.548104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155442 Jy
! Component: 100  -  total flux cleaned = 0.198431 Jy
! Component: 150  -  total flux cleaned = 0.213619 Jy
! Component: 200  -  total flux cleaned = 0.219741 Jy
! Total flux subtracted in 200 components = 0.219741 Jy
! Clean residual min=-0.003598 max=0.003534 Jy/beam
! Clean residual mean=-0.000000 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.219741 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.219741 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9535 mas, bmaj=1.429 mas, bpa=-8.148 degrees
! Estimated noise=0.290529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262987 Jy
! Component: 100  -  total flux cleaned = 0.00313862 Jy
! Component: 150  -  total flux cleaned = 0.00357949 Jy
! Component: 200  -  total flux cleaned = 0.00382368 Jy
! Total flux subtracted in 200 components = 0.00382368 Jy
! Clean residual min=-0.001602 max=0.001433 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.223565 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.223565 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.468 mas, bmaj=2.762 mas, bpa=-63.6 degrees
! Estimated noise=0.367805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000486961 Jy
! Component: 100  -  total flux cleaned = 0.000548496 Jy
! Component: 150  -  total flux cleaned = 0.000601177 Jy
! Component: 200  -  total flux cleaned = 0.000648398 Jy
! Total flux subtracted in 200 components = 0.000648398 Jy
! Clean residual min=-0.001678 max=0.001521 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.224213 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.21734e-05 Jy
! Component: 100  -  total flux cleaned = 8.00878e-05 Jy
! Component: 150  -  total flux cleaned = 0.000114388 Jy
! Component: 200  -  total flux cleaned = 0.000145325 Jy
! Total flux subtracted in 200 components = 0.000145325 Jy
! Clean residual min=-0.001644 max=0.001536 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.224359 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.224359 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9535 mas, bmaj=1.429 mas, bpa=-8.148 degrees
! Estimated noise=0.290529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237253 Jy
! Component: 100  -  total flux cleaned = -0.000210373 Jy
! Component: 150  -  total flux cleaned = -0.000186773 Jy
! Component: 200  -  total flux cleaned = -0.000187947 Jy
! Total flux subtracted in 200 components = -0.000187947 Jy
! Clean residual min=-0.001470 max=0.001464 Jy/beam
! Clean residual mean=-0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.224171 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 33 components and 0.224171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057785Jy  sigma=1.346177
! Fit after  self-cal, rms=0.057783Jy  sigma=1.346153
wmodel /scr/pima/bg219i_uvs/J1608+4012_X_map.mod
! Writing 33 model components to file: /scr/pima/bg219i_uvs/J1608+4012_X_map.mod
wobs /scr/pima/bg219i_uvs/J1608+4012_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1608+4012_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1608+4012_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219i_uvs/J1608+4012_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00018729 Jy
! Component: 100  -  total flux cleaned = -0.000361486 Jy
! Component: 150  -  total flux cleaned = -0.00047937 Jy
! Component: 200  -  total flux cleaned = -0.000547024 Jy
! Component: 250  -  total flux cleaned = -0.000633763 Jy
! Component: 300  -  total flux cleaned = -0.000633366 Jy
! Component: 350  -  total flux cleaned = -0.000653391 Jy
! Component: 400  -  total flux cleaned = -0.000751095 Jy
! Component: 450  -  total flux cleaned = -0.000827222 Jy
! Component: 500  -  total flux cleaned = -0.000901537 Jy
! Component: 550  -  total flux cleaned = -0.00100929 Jy
! Component: 600  -  total flux cleaned = -0.0010795 Jy
! Component: 650  -  total flux cleaned = -0.0011138 Jy
! Component: 700  -  total flux cleaned = -0.00113086 Jy
! Component: 750  -  total flux cleaned = -0.00119639 Jy
! Component: 800  -  total flux cleaned = -0.00121218 Jy
! Component: 850  -  total flux cleaned = -0.00121211 Jy
! Component: 900  -  total flux cleaned = -0.00125885 Jy
! Component: 950  -  total flux cleaned = -0.00128908 Jy
! Component: 1000  -  total flux cleaned = -0.00133361 Jy
! Component: 1050  -  total flux cleaned = -0.00133372 Jy
! Component: 1100  -  total flux cleaned = -0.00143519 Jy
! Component: 1150  -  total flux cleaned = -0.00152043 Jy
! Component: 1200  -  total flux cleaned = -0.00161812 Jy
! Component: 1250  -  total flux cleaned = -0.00167327 Jy
! Component: 1300  -  total flux cleaned = -0.00175499 Jy
! Component: 1350  -  total flux cleaned = -0.00180876 Jy
! Component: 1400  -  total flux cleaned = -0.00191429 Jy
! Component: 1450  -  total flux cleaned = -0.00196644 Jy
! Component: 1500  -  total flux cleaned = -0.00203059 Jy
! Component: 1550  -  total flux cleaned = -0.00209392 Jy
! Component: 1600  -  total flux cleaned = -0.00206884 Jy
! Component: 1650  -  total flux cleaned = -0.00210589 Jy
! Component: 1700  -  total flux cleaned = -0.00205672 Jy
! Component: 1750  -  total flux cleaned = -0.00210517 Jy
! Component: 1800  -  total flux cleaned = -0.00210515 Jy
! Component: 1850  -  total flux cleaned = -0.00215259 Jy
! Component: 1900  -  total flux cleaned = -0.00215262 Jy
! Component: 1950  -  total flux cleaned = -0.00217589 Jy
! Component: 2000  -  total flux cleaned = -0.00219898 Jy
! Component: 2050  -  total flux cleaned = -0.00222175 Jy
! Component: 2100  -  total flux cleaned = -0.00223287 Jy
! Component: 2150  -  total flux cleaned = -0.002244 Jy
! Component: 2200  -  total flux cleaned = -0.0022663 Jy
! Component: 2250  -  total flux cleaned = -0.0022773 Jy
! Component: 2300  -  total flux cleaned = -0.0022774 Jy
! Component: 2350  -  total flux cleaned = -0.00235301 Jy
! Component: 2400  -  total flux cleaned = -0.00237443 Jy
! Component: 2450  -  total flux cleaned = -0.00235334 Jy
! Component: 2500  -  total flux cleaned = -0.00242716 Jy
! Component: 2550  -  total flux cleaned = -0.00242705 Jy
! Component: 2600  -  total flux cleaned = -0.00244787 Jy
! Component: 2650  -  total flux cleaned = -0.00249937 Jy
! Component: 2700  -  total flux cleaned = -0.0025403 Jy
! Component: 2750  -  total flux cleaned = -0.0026012 Jy
! Component: 2800  -  total flux cleaned = -0.00261123 Jy
! Component: 2850  -  total flux cleaned = -0.00263131 Jy
! Component: 2900  -  total flux cleaned = -0.002691 Jy
! Component: 2950  -  total flux cleaned = -0.00274042 Jy
! Component: 3000  -  total flux cleaned = -0.00277969 Jy
! Component: 3050  -  total flux cleaned = -0.00280906 Jy
! Component: 3100  -  total flux cleaned = -0.00287701 Jy
! Component: 3150  -  total flux cleaned = -0.00291562 Jy
! Component: 3200  -  total flux cleaned = -0.002954 Jy
! Component: 3250  -  total flux cleaned = -0.00300168 Jy
! Component: 3300  -  total flux cleaned = -0.0030491 Jy
! Component: 3350  -  total flux cleaned = -0.00309612 Jy
! Component: 3400  -  total flux cleaned = -0.00313356 Jy
! Component: 3450  -  total flux cleaned = -0.00315211 Jy
! Component: 3500  -  total flux cleaned = -0.00318919 Jy
! Component: 3550  -  total flux cleaned = -0.00323521 Jy
! Component: 3600  -  total flux cleaned = -0.0032811 Jy
! Component: 3650  -  total flux cleaned = -0.00327198 Jy
! Component: 3700  -  total flux cleaned = -0.00330828 Jy
! Component: 3750  -  total flux cleaned = -0.00336259 Jy
! Component: 3800  -  total flux cleaned = -0.00342565 Jy
! Component: 3850  -  total flux cleaned = -0.00344352 Jy
! Component: 3900  -  total flux cleaned = -0.00346142 Jy
! Component: 3950  -  total flux cleaned = -0.00353262 Jy
! Component: 4000  -  total flux cleaned = -0.00358582 Jy
! Component: 4050  -  total flux cleaned = -0.00360348 Jy
! Total flux subtracted in 4096 components = -0.00366502 Jy
! Clean residual min=-0.000555 max=0.000578 Jy/beam
! Clean residual mean=-0.000001 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.220506 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 323 components and 0.220506 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1608+4012_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9535 x 1.429 at -8.148 degrees (North through East)
! Clean map  min=-0.0008908  max=0.20378 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1608+4012_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.203781 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013551 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.199494 0.199494 0.398988 0.797976 1.59595 3.1919 6.38381 12.7676 25.5352 51.0704
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1503.81 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1608+4012_X_uvs.log closed on Wed Apr  6 23:49:31 2016