! Started logfile: /scr/pima/bg219i_uvs/J1606+2717_X_dfm.log on Thu May 19 23:27:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1606+2717_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1606+2717_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.807937 visibilities/baseline/integration-bin.
! Found source: J1606+2717
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18324 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1606+2717_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.035206Jy  sigma=25.445273
! Fit after  self-cal, rms=0.760467Jy  sigma=18.597406
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7162 mas, bmaj=1.451 mas, bpa=-4.055 degrees
! Estimated noise=0.441639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180179 Jy
! Component: 100  -  total flux cleaned = 0.224818 Jy
! Total flux subtracted in 100 components = 0.224818 Jy
! Clean residual min=-0.006931 max=0.018110 Jy/beam
! Clean residual mean=-0.000001 rms=0.001848 Jy/beam
! Combined flux in latest and established models = 0.224818 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.224818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070646Jy  sigma=1.651201
! Fit after  self-cal, rms=0.070566Jy  sigma=1.649397
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199867 Jy
! Component: 100  -  total flux cleaned = 0.0301232 Jy
! Total flux subtracted in 100 components = 0.0301232 Jy
! Clean residual min=-0.005175 max=0.009228 Jy/beam
! Clean residual mean=-0.000001 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.254941 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.254941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062909Jy  sigma=1.437904
! Fit after  self-cal, rms=0.062832Jy  sigma=1.436151
! Inverting map 
! Added new window around map position (1, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00874204 Jy
! Component: 100  -  total flux cleaned = 0.012879 Jy
! Total flux subtracted in 100 components = 0.012879 Jy
! Clean residual min=-0.004535 max=0.004114 Jy/beam
! Clean residual mean=-0.000000 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.26782 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 24 components and 0.26782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061418Jy  sigma=1.396425
! Fit after  self-cal, rms=0.061310Jy  sigma=1.393766
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9339 mas, bmaj=1.762 mas, bpa=-3.3 degrees
! Estimated noise=0.223079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00514453 Jy
! Component: 100  -  total flux cleaned = 0.0077923 Jy
! Component: 150  -  total flux cleaned = 0.00956145 Jy
! Component: 200  -  total flux cleaned = 0.01082 Jy
! Total flux subtracted in 200 components = 0.01082 Jy
! Clean residual min=-0.002343 max=0.002600 Jy/beam
! Clean residual mean=0.000001 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.27864 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 44 components and 0.27864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060913Jy  sigma=1.381410
! Fit after  self-cal, rms=0.060890Jy  sigma=1.380802
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9339 x 1.762 at -3.3 degrees (North through East)
! Clean map  min=-0.0021677  max=0.2383 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.02     KP        1.02     
!   LA        0.97     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        1.02     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.96     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.00     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.03     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.99     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.96     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.98     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.06     KP        1.00     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.95     
!   PT        0.99     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.060890Jy  sigma=1.380802
! Fit after  self-cal, rms=0.060671Jy  sigma=1.371773
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9346 mas, bmaj=1.765 mas, bpa=-3.107 degrees
! Estimated noise=0.222645 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333635 Jy
! Component: 100  -  total flux cleaned = 0.000235278 Jy
! Component: 150  -  total flux cleaned = 0.00013353 Jy
! Component: 200  -  total flux cleaned = 6.60459e-05 Jy
! Total flux subtracted in 200 components = 6.60459e-05 Jy
! Clean residual min=-0.001543 max=0.001520 Jy/beam
! Clean residual mean=0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.278706 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.278706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060653Jy  sigma=1.371241
! Fit after  self-cal, rms=0.060658Jy  sigma=1.371099
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060658Jy  sigma=1.371099
! Fit after  self-cal, rms=0.060601Jy  sigma=1.367654
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9341 mas, bmaj=1.765 mas, bpa=-3.182 degrees
! Estimated noise=0.222635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.98301e-05 Jy
! Component: 100  -  total flux cleaned = 1.02532e-05 Jy
! Component: 150  -  total flux cleaned = -4.07882e-05 Jy
! Component: 200  -  total flux cleaned = -6.42108e-05 Jy
! Total flux subtracted in 200 components = -6.42108e-05 Jy
! Clean residual min=-0.001433 max=0.001388 Jy/beam
! Clean residual mean=-0.000000 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.278642 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 55 components and 0.278642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060591Jy  sigma=1.367414
! Fit after  self-cal, rms=0.060589Jy  sigma=1.367316
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.21379e-05 Jy
! Component: 100  -  total flux cleaned = -7.52078e-05 Jy
! Component: 150  -  total flux cleaned = -7.47797e-05 Jy
! Component: 200  -  total flux cleaned = -9.35953e-05 Jy
! Total flux subtracted in 200 components = -9.35953e-05 Jy
! Clean residual min=-0.001419 max=0.001348 Jy/beam
! Clean residual mean=-0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.278549 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 56 components and 0.278549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060582Jy  sigma=1.367156
! Fit after  self-cal, rms=0.060578Jy  sigma=1.367094
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060578Jy  sigma=1.367094
! Fit after  self-cal, rms=0.060590Jy  sigma=1.367086
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9338 mas, bmaj=1.766 mas, bpa=-3.198 degrees
! Estimated noise=0.22264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.17868e-05 Jy
! Component: 100  -  total flux cleaned = -3.74214e-05 Jy
! Component: 150  -  total flux cleaned = -6.60745e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100463 Jy
! Total flux subtracted in 200 components = -0.000100463 Jy
! Clean residual min=-0.001409 max=0.001330 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.278448 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.278448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060584Jy  sigma=1.366963
! Fit after  self-cal, rms=0.060582Jy  sigma=1.366920
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.49883e-05 Jy
! Component: 100  -  total flux cleaned = -5.54191e-05 Jy
! Component: 150  -  total flux cleaned = -7.11716e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101217 Jy
! Total flux subtracted in 200 components = -0.000101217 Jy
! Clean residual min=-0.001401 max=0.001324 Jy/beam
! Clean residual mean=-0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.278347 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.278347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060578Jy  sigma=1.366828
! Fit after  self-cal, rms=0.060576Jy  sigma=1.366798
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060576Jy  sigma=1.366798
! Fit after  self-cal, rms=0.060589Jy  sigma=1.366795
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.119 mas, bmaj=2.742 mas, bpa=-0.1097 degrees
! Estimated noise=0.27741 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.05321e-05 Jy
! Component: 100  -  total flux cleaned = 5.02045e-05 Jy
! Component: 150  -  total flux cleaned = 5.07024e-05 Jy
! Component: 200  -  total flux cleaned = 5.10781e-05 Jy
! Total flux subtracted in 200 components = 5.10781e-05 Jy
! Clean residual min=-0.001753 max=0.001524 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.278398 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 66 components and 0.278398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060588Jy  sigma=1.366787
! Fit after  self-cal, rms=0.060587Jy  sigma=1.366762
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.83876e-05 Jy
! Component: 100  -  total flux cleaned = 3.32595e-05 Jy
! Component: 150  -  total flux cleaned = 2.85713e-05 Jy
! Component: 200  -  total flux cleaned = 1.94747e-05 Jy
! Total flux subtracted in 200 components = 1.94747e-05 Jy
! Clean residual min=-0.001732 max=0.001524 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.278417 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.278418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060586Jy  sigma=1.366755
! Fit after  self-cal, rms=0.060585Jy  sigma=1.366735
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9337 mas, bmaj=1.766 mas, bpa=-3.211 degrees
! Estimated noise=0.22265 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9337 x 1.766 at -3.211 degrees (North through East)
! Clean map  min=-0.0013062  max=0.23797 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7152 mas, bmaj=1.455 mas, bpa=-3.879 degrees
! Estimated noise=0.441383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.179698 Jy
! Component: 100  -  total flux cleaned = 0.226556 Jy
! Component: 150  -  total flux cleaned = 0.247481 Jy
! Component: 200  -  total flux cleaned = 0.258944 Jy
! Total flux subtracted in 200 components = 0.258944 Jy
! Clean residual min=-0.003708 max=0.005773 Jy/beam
! Clean residual mean=-0.000001 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.258944 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.258944 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9337 mas, bmaj=1.766 mas, bpa=-3.211 degrees
! Estimated noise=0.22265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00939875 Jy
! Component: 100  -  total flux cleaned = 0.0138939 Jy
! Component: 150  -  total flux cleaned = 0.0162758 Jy
! Component: 200  -  total flux cleaned = 0.0176251 Jy
! Total flux subtracted in 200 components = 0.0176251 Jy
! Clean residual min=-0.001480 max=0.001405 Jy/beam
! Clean residual mean=-0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.276569 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.276569 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.119 mas, bmaj=2.742 mas, bpa=-0.1097 degrees
! Estimated noise=0.27741 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103881 Jy
! Component: 100  -  total flux cleaned = 0.00149557 Jy
! Component: 150  -  total flux cleaned = 0.00172474 Jy
! Component: 200  -  total flux cleaned = 0.00177519 Jy
! Total flux subtracted in 200 components = 0.00177519 Jy
! Clean residual min=-0.001759 max=0.001501 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.278344 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.71015e-05 Jy
! Component: 100  -  total flux cleaned = 2.49121e-05 Jy
! Component: 150  -  total flux cleaned = 3.24463e-05 Jy
! Component: 200  -  total flux cleaned = 3.95403e-05 Jy
! Total flux subtracted in 200 components = 3.95403e-05 Jy
! Clean residual min=-0.001746 max=0.001504 Jy/beam
! Clean residual mean=-0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.278383 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 50 components and 0.278383 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9337 mas, bmaj=1.766 mas, bpa=-3.211 degrees
! Estimated noise=0.22265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.44777e-07 Jy
! Component: 100  -  total flux cleaned = -2.47757e-05 Jy
! Component: 150  -  total flux cleaned = -4.58993e-05 Jy
! Component: 200  -  total flux cleaned = -6.40183e-05 Jy
! Total flux subtracted in 200 components = -6.40183e-05 Jy
! Clean residual min=-0.001403 max=0.001328 Jy/beam
! Clean residual mean=-0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.278319 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 55 components and 0.278319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060600Jy  sigma=1.367008
! Fit after  self-cal, rms=0.060591Jy  sigma=1.366834
wmodel /J1606+2717_X_map.mod
! wmodel: Unable to open new model file: /J1606+2717_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1606+2717_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9337 x 1.766 at -3.211 degrees (North through East)
! Clean map  min=-0.0012769  max=0.23773 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1606+2717_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.237728 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000323072 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.407699 0.407699 0.815397 1.63079 3.26159 6.52318 13.0464 26.0927 52.1854
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.237 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  735.837 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1606+2717_X_dfm.log closed on Thu May 19 23:27:30 2016