! Started logfile: /scr/pima/bg219i_uvs/J1547+2052_X_dfm.log on Thu May 19 23:26:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1547+2052_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1547+2052_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.783513 visibilities/baseline/integration-bin.
! Found source: J1547+2052
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26232 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1547+2052_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001606Jy  sigma=25.439479
! Fit after  self-cal, rms=0.963673Jy  sigma=24.484430
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7317 mas, bmaj=1.569 mas, bpa=-0.3402 degrees
! Estimated noise=0.376027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0288723 Jy
! Component: 100  -  total flux cleaned = 0.0352829 Jy
! Total flux subtracted in 100 components = 0.0352829 Jy
! Clean residual min=-0.002444 max=0.002369 Jy/beam
! Clean residual mean=-0.000004 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.0352829 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0352829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058774Jy  sigma=1.383044
! Fit after  self-cal, rms=0.056830Jy  sigma=1.330467
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427677 Jy
! Component: 100  -  total flux cleaned = 0.00566423 Jy
! Total flux subtracted in 100 components = 0.00566423 Jy
! Clean residual min=-0.002112 max=0.002551 Jy/beam
! Clean residual mean=-0.000003 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.0409471 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.0409471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056483Jy  sigma=1.322155
! Fit after  self-cal, rms=0.056477Jy  sigma=1.321994
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9428 mas, bmaj=1.879 mas, bpa=0.7039 degrees
! Estimated noise=0.188667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000972878 Jy
! Component: 100  -  total flux cleaned = 0.00124945 Jy
! Component: 150  -  total flux cleaned = 0.00134075 Jy
! Component: 200  -  total flux cleaned = 0.00136292 Jy
! Total flux subtracted in 200 components = 0.00136292 Jy
! Clean residual min=-0.001544 max=0.001429 Jy/beam
! Clean residual mean=-0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.04231 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.04231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056458Jy  sigma=1.321597
! Fit after  self-cal, rms=0.056457Jy  sigma=1.321528
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9428 x 1.879 at 0.7039 degrees (North through East)
! Clean map  min=-0.0014655  max=0.040793 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        1.02     KP        1.05     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.12     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.91     HN        0.91     KP        1.11     
!   LA        0.96     MK        1.09     NL        1.19     OV        0.95     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.85     KP        1.11     
!   LA        0.93     MK        1.06     NL        1.00     OV        1.01     
!   PT        1.07     SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        0.96     KP        1.13     
!   LA        0.94     MK        0.98     NL        1.07     OV        0.96     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.91     HN        0.84     KP        1.07     
!   LA        1.00     MK        1.14     NL        1.07     OV        0.90     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        0.87     KP        1.06     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.93     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.056457Jy  sigma=1.321528
! Fit after  self-cal, rms=0.056201Jy  sigma=1.319840
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.944 mas, bmaj=1.881 mas, bpa=1.064 degrees
! Estimated noise=0.189268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216915 Jy
! Component: 100  -  total flux cleaned = 0.000226395 Jy
! Component: 150  -  total flux cleaned = 0.000225974 Jy
! Component: 200  -  total flux cleaned = 0.000212166 Jy
! Total flux subtracted in 200 components = 0.000212166 Jy
! Clean residual min=-0.001345 max=0.001361 Jy/beam
! Clean residual mean=-0.000000 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0425222 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 28 components and 0.0425222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056197Jy  sigma=1.319766
! Fit after  self-cal, rms=0.056216Jy  sigma=1.319474
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056216Jy  sigma=1.319474
! Fit after  self-cal, rms=0.056591Jy  sigma=1.318004
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9453 mas, bmaj=1.879 mas, bpa=0.8951 degrees
! Estimated noise=0.190237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170498 Jy
! Component: 100  -  total flux cleaned = 0.000170477 Jy
! Component: 150  -  total flux cleaned = 0.000178936 Jy
! Component: 200  -  total flux cleaned = 0.000185266 Jy
! Total flux subtracted in 200 components = 0.000185266 Jy
! Clean residual min=-0.001182 max=0.001318 Jy/beam
! Clean residual mean=0.000000 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.0427074 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 30 components and 0.0427074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056587Jy  sigma=1.317935
! Fit after  self-cal, rms=0.056608Jy  sigma=1.317536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.2, 50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000997745 Jy
! Component: 100  -  total flux cleaned = 0.00120916 Jy
! Component: 150  -  total flux cleaned = 0.00126793 Jy
! Component: 200  -  total flux cleaned = 0.0012258 Jy
! Total flux subtracted in 200 components = 0.0012258 Jy
! Clean residual min=-0.001119 max=0.001224 Jy/beam
! Clean residual mean=0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.0439332 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.0439332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056573Jy  sigma=1.316743
! Fit after  self-cal, rms=0.056559Jy  sigma=1.316400
! Inverting map 
! Added new window around map position (19.4, 24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102083 Jy
! Component: 100  -  total flux cleaned = 0.00142837 Jy
! Component: 150  -  total flux cleaned = 0.00167263 Jy
! Component: 200  -  total flux cleaned = 0.00179181 Jy
! Total flux subtracted in 200 components = 0.00179181 Jy
! Clean residual min=-0.001055 max=0.001181 Jy/beam
! Clean residual mean=0.000000 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.045725 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 56 components and 0.045725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056524Jy  sigma=1.315642
! Fit after  self-cal, rms=0.056512Jy  sigma=1.315457
! Inverting map 
! Added new window around map position (37.8, 33.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105534 Jy
! Component: 100  -  total flux cleaned = 0.00144536 Jy
! Component: 150  -  total flux cleaned = 0.00168367 Jy
! Component: 200  -  total flux cleaned = 0.00182947 Jy
! Total flux subtracted in 200 components = 0.00182947 Jy
! Clean residual min=-0.001001 max=0.001009 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0475545 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 70 components and 0.0475545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056481Jy  sigma=1.314820
! Fit after  self-cal, rms=0.056469Jy  sigma=1.314700
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056469Jy  sigma=1.314700
! Fit after  self-cal, rms=0.056541Jy  sigma=1.314582
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9461 mas, bmaj=1.879 mas, bpa=0.9447 degrees
! Estimated noise=0.190076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476994 Jy
! Component: 100  -  total flux cleaned = 0.000675407 Jy
! Component: 150  -  total flux cleaned = 0.000773592 Jy
! Component: 200  -  total flux cleaned = 0.000827061 Jy
! Total flux subtracted in 200 components = 0.000827061 Jy
! Clean residual min=-0.000988 max=0.001007 Jy/beam
! Clean residual mean=-0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0483816 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.0483816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056525Jy  sigma=1.314261
! Fit after  self-cal, rms=0.056525Jy  sigma=1.314201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184166 Jy
! Component: 100  -  total flux cleaned = 0.000255553 Jy
! Component: 150  -  total flux cleaned = 0.000255965 Jy
! Component: 200  -  total flux cleaned = 0.000286327 Jy
! Total flux subtracted in 200 components = 0.000286327 Jy
! Clean residual min=-0.000981 max=0.000971 Jy/beam
! Clean residual mean=-0.000000 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0486679 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.0486679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056514Jy  sigma=1.313998
! Fit after  self-cal, rms=0.056506Jy  sigma=1.313855
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056506Jy  sigma=1.313855
! Fit after  self-cal, rms=0.056546Jy  sigma=1.313833
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=2.85 mas, bpa=-3.484 degrees
! Estimated noise=0.233324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.24237e-06 Jy
! Component: 100  -  total flux cleaned = 4.69304e-05 Jy
! Component: 150  -  total flux cleaned = 5.78562e-05 Jy
! Component: 200  -  total flux cleaned = 5.75788e-05 Jy
! Total flux subtracted in 200 components = 5.75788e-05 Jy
! Clean residual min=-0.001130 max=0.000981 Jy/beam
! Clean residual mean=-0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0487255 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.0487255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056543Jy  sigma=1.313744
! Fit after  self-cal, rms=0.056542Jy  sigma=1.313714
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.01029e-05 Jy
! Component: 100  -  total flux cleaned = -1.8729e-05 Jy
! Component: 150  -  total flux cleaned = -6.15637e-08 Jy
! Component: 200  -  total flux cleaned = 8.28415e-06 Jy
! Total flux subtracted in 200 components = 8.28415e-06 Jy
! Clean residual min=-0.001127 max=0.000996 Jy/beam
! Clean residual mean=-0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0487338 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.0487337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056540Jy  sigma=1.313665
! Fit after  self-cal, rms=0.056536Jy  sigma=1.313648
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9463 mas, bmaj=1.879 mas, bpa=0.9799 degrees
! Estimated noise=0.190021 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9463 x 1.879 at 0.9799 degrees (North through East)
! Clean map  min=-0.0011982  max=0.041323 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7333 mas, bmaj=1.571 mas, bpa=-0.2997 degrees
! Estimated noise=0.381273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0316768 Jy
! Component: 100  -  total flux cleaned = 0.0387413 Jy
! Component: 150  -  total flux cleaned = 0.0412413 Jy
! Component: 200  -  total flux cleaned = 0.0422523 Jy
! Total flux subtracted in 200 components = 0.0422523 Jy
! Clean residual min=-0.002275 max=0.002598 Jy/beam
! Clean residual mean=-0.000003 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.0422523 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0422523 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9463 mas, bmaj=1.879 mas, bpa=0.9799 degrees
! Estimated noise=0.190021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225346 Jy
! Component: 100  -  total flux cleaned = 0.00345494 Jy
! Component: 150  -  total flux cleaned = 0.00415033 Jy
! Component: 200  -  total flux cleaned = 0.00476336 Jy
! Total flux subtracted in 200 components = 0.00476336 Jy
! Clean residual min=-0.001277 max=0.001139 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.0470157 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 38 components and 0.0470157 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=2.85 mas, bpa=-3.484 degrees
! Estimated noise=0.233324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000834723 Jy
! Component: 100  -  total flux cleaned = 0.00115656 Jy
! Component: 150  -  total flux cleaned = 0.00135437 Jy
! Component: 200  -  total flux cleaned = 0.00141975 Jy
! Total flux subtracted in 200 components = 0.00141975 Jy
! Clean residual min=-0.001222 max=0.001075 Jy/beam
! Clean residual mean=-0.000000 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0484354 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100577 Jy
! Component: 100  -  total flux cleaned = 0.000154877 Jy
! Component: 150  -  total flux cleaned = 0.000206209 Jy
! Component: 200  -  total flux cleaned = 0.000253204 Jy
! Total flux subtracted in 200 components = 0.000253204 Jy
! Clean residual min=-0.001183 max=0.001005 Jy/beam
! Clean residual mean=-0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0486886 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 72 components and 0.0486886 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9463 mas, bmaj=1.879 mas, bpa=0.9799 degrees
! Estimated noise=0.190021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026701 Jy
! Component: 100  -  total flux cleaned = 0.000346442 Jy
! Component: 150  -  total flux cleaned = 0.000393791 Jy
! Component: 200  -  total flux cleaned = 0.000371534 Jy
! Total flux subtracted in 200 components = 0.000371534 Jy
! Clean residual min=-0.001023 max=0.001009 Jy/beam
! Clean residual mean=-0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0490602 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 0.0490602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056554Jy  sigma=1.314036
! Fit after  self-cal, rms=0.056555Jy  sigma=1.313957
wmodel /J1547+2052_X_map.mod
! wmodel: Unable to open new model file: /J1547+2052_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1547+2052_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9463 x 1.879 at 0.9799 degrees (North through East)
! Clean map  min=-0.0011327  max=0.041232 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1547+2052_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0412317 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000249306 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.81394 1.81394 3.62787 7.25575 14.5115 29.023 58.046
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.041 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  165.386 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1547+2052_X_dfm.log closed on Thu May 19 23:26:45 2016