! Started logfile: /scr/pima/bg219i_uvs/J1514+0252_X_dfm.log on Thu May 19 23:25:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1514+0252_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1514+0252_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.745299 visibilities/baseline/integration-bin.
! Found source: J1514+0252
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1514+0252_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012165Jy  sigma=24.029204
! Fit after  self-cal, rms=0.859137Jy  sigma=20.324365
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7447 mas, bmaj=1.682 mas, bpa=-2.137 degrees
! Estimated noise=0.427132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105477 Jy
! Component: 100  -  total flux cleaned = 0.134093 Jy
! Total flux subtracted in 100 components = 0.134093 Jy
! Clean residual min=-0.003891 max=0.011660 Jy/beam
! Clean residual mean=-0.000003 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.134093 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.134093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064804Jy  sigma=1.443036
! Fit after  self-cal, rms=0.064638Jy  sigma=1.438800
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119802 Jy
! Component: 100  -  total flux cleaned = 0.0170395 Jy
! Total flux subtracted in 100 components = 0.0170395 Jy
! Clean residual min=-0.002746 max=0.005231 Jy/beam
! Clean residual mean=-0.000000 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.151132 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.151132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061979Jy  sigma=1.366403
! Fit after  self-cal, rms=0.061970Jy  sigma=1.366065
! Inverting map 
! Added new window around map position (2.4, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465985 Jy
! Component: 100  -  total flux cleaned = 0.00732176 Jy
! Total flux subtracted in 100 components = 0.00732176 Jy
! Clean residual min=-0.002564 max=0.002706 Jy/beam
! Clean residual mean=-0.000000 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.158454 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.158454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061511Jy  sigma=1.353538
! Fit after  self-cal, rms=0.061482Jy  sigma=1.352821
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9925 mas, bmaj=2.074 mas, bpa=-3.105 degrees
! Estimated noise=0.21409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377894 Jy
! Component: 100  -  total flux cleaned = 0.00597635 Jy
! Component: 150  -  total flux cleaned = 0.00743146 Jy
! Component: 200  -  total flux cleaned = 0.00844808 Jy
! Total flux subtracted in 200 components = 0.00844808 Jy
! Clean residual min=-0.001663 max=0.003198 Jy/beam
! Clean residual mean=0.000002 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.166902 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 49 components and 0.166902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061262Jy  sigma=1.345897
! Fit after  self-cal, rms=0.061245Jy  sigma=1.345469
! Inverting map 
! Added new window around map position (3.4, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302337 Jy
! Component: 100  -  total flux cleaned = 0.00430834 Jy
! Component: 150  -  total flux cleaned = 0.00493756 Jy
! Component: 200  -  total flux cleaned = 0.00531612 Jy
! Total flux subtracted in 200 components = 0.00531612 Jy
! Clean residual min=-0.001372 max=0.001419 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.172218 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 78 components and 0.172218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061113Jy  sigma=1.341835
! Fit after  self-cal, rms=0.061100Jy  sigma=1.341465
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9925 x 2.074 at -3.105 degrees (North through East)
! Clean map  min=-0.001241  max=0.14056 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.06     KP        0.97     
!   LA        1.00     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        1.02     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.02     
!   LA        0.98     MK        0.98     NL        1.02     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.01     
!   LA        1.03     MK        1.00     NL        1.02     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.98     KP        1.02     
!   LA        1.01     MK        0.99     NL        0.98     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.93     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.99     KP        1.02     
!   LA        1.00     MK        0.99     NL        0.99     OV        1.01     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.99     KP        1.02     
!   LA        0.99     MK        0.99     NL        1.03     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.99     KP        1.00     
!   LA        1.02     MK        0.97     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.05     NL        0.99     OV        0.96     
!   PT        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061100Jy  sigma=1.341465
! Fit after  self-cal, rms=0.060949Jy  sigma=1.338469
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9929 mas, bmaj=2.076 mas, bpa=-3.08 degrees
! Estimated noise=0.213469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211729 Jy
! Component: 100  -  total flux cleaned = 0.000325066 Jy
! Component: 150  -  total flux cleaned = 0.000277336 Jy
! Component: 200  -  total flux cleaned = 0.000234936 Jy
! Total flux subtracted in 200 components = 0.000234936 Jy
! Clean residual min=-0.001194 max=0.001207 Jy/beam
! Clean residual mean=0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.172453 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.172453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060938Jy  sigma=1.338242
! Fit after  self-cal, rms=0.060947Jy  sigma=1.338203
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060947Jy  sigma=1.338203
! Fit after  self-cal, rms=0.060883Jy  sigma=1.336790
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.993 mas, bmaj=2.076 mas, bpa=-3.093 degrees
! Estimated noise=0.213306 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.74196e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119744 Jy
! Component: 150  -  total flux cleaned = -0.000155011 Jy
! Component: 200  -  total flux cleaned = -0.000187799 Jy
! Total flux subtracted in 200 components = -0.000187799 Jy
! Clean residual min=-0.001137 max=0.001110 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.172266 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.172266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060877Jy  sigma=1.336686
! Fit after  self-cal, rms=0.060878Jy  sigma=1.336670
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.76694e-05 Jy
! Component: 100  -  total flux cleaned = 1.85003e-05 Jy
! Component: 150  -  total flux cleaned = -8.73276e-06 Jy
! Component: 200  -  total flux cleaned = -2.60591e-05 Jy
! Total flux subtracted in 200 components = -2.60591e-05 Jy
! Clean residual min=-0.001124 max=0.001109 Jy/beam
! Clean residual mean=0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.172239 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 111 components and 0.172239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060875Jy  sigma=1.336613
! Fit after  self-cal, rms=0.060875Jy  sigma=1.336610
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060875Jy  sigma=1.336610
! Fit after  self-cal, rms=0.060825Jy  sigma=1.336595
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9935 mas, bmaj=2.077 mas, bpa=-3.069 degrees
! Estimated noise=0.213131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222787 Jy
! Component: 100  -  total flux cleaned = -0.00024022 Jy
! Component: 150  -  total flux cleaned = -0.000264746 Jy
! Component: 200  -  total flux cleaned = -0.000303595 Jy
! Total flux subtracted in 200 components = -0.000303595 Jy
! Clean residual min=-0.001115 max=0.001107 Jy/beam
! Clean residual mean=0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.171936 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 120 components and 0.171936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060822Jy  sigma=1.336550
! Fit after  self-cal, rms=0.060822Jy  sigma=1.336550
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.62522e-06 Jy
! Component: 100  -  total flux cleaned = -1.34163e-05 Jy
! Component: 150  -  total flux cleaned = -3.46258e-05 Jy
! Component: 200  -  total flux cleaned = -4.83257e-05 Jy
! Total flux subtracted in 200 components = -4.83257e-05 Jy
! Clean residual min=-0.001107 max=0.001104 Jy/beam
! Clean residual mean=0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.171888 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 128 components and 0.171888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060820Jy  sigma=1.336516
! Fit after  self-cal, rms=0.060820Jy  sigma=1.336518
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060820Jy  sigma=1.336518
! Fit after  self-cal, rms=0.060784Jy  sigma=1.336508
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.369 mas, bmaj=3.382 mas, bpa=-8.321 degrees
! Estimated noise=0.257775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244372 Jy
! Component: 100  -  total flux cleaned = -0.000286946 Jy
! Component: 150  -  total flux cleaned = -0.000338317 Jy
! Component: 200  -  total flux cleaned = -0.00038327 Jy
! Total flux subtracted in 200 components = -0.00038327 Jy
! Clean residual min=-0.001285 max=0.001327 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.171504 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 130 components and 0.171504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060783Jy  sigma=1.336502
! Fit after  self-cal, rms=0.060782Jy  sigma=1.336500
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.40299e-05 Jy
! Component: 100  -  total flux cleaned = -5.08112e-05 Jy
! Component: 150  -  total flux cleaned = -6.99393e-05 Jy
! Component: 200  -  total flux cleaned = -9.20976e-05 Jy
! Total flux subtracted in 200 components = -9.20976e-05 Jy
! Clean residual min=-0.001280 max=0.001338 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.171412 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 140 components and 0.171412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060781Jy  sigma=1.336498
! Fit after  self-cal, rms=0.060781Jy  sigma=1.336498
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9941 mas, bmaj=2.077 mas, bpa=-3.052 degrees
! Estimated noise=0.212979 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9941 x 2.077 at -3.052 degrees (North through East)
! Clean map  min=-0.0010519  max=0.13992 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7463 mas, bmaj=1.684 mas, bpa=-2.059 degrees
! Estimated noise=0.426439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105293 Jy
! Component: 100  -  total flux cleaned = 0.13406 Jy
! Component: 150  -  total flux cleaned = 0.145806 Jy
! Component: 200  -  total flux cleaned = 0.15186 Jy
! Total flux subtracted in 200 components = 0.15186 Jy
! Clean residual min=-0.002740 max=0.003223 Jy/beam
! Clean residual mean=-0.000001 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.15186 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.15186 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9941 mas, bmaj=2.077 mas, bpa=-3.052 degrees
! Estimated noise=0.212979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620961 Jy
! Component: 100  -  total flux cleaned = 0.0102547 Jy
! Component: 150  -  total flux cleaned = 0.0130702 Jy
! Component: 200  -  total flux cleaned = 0.0150967 Jy
! Total flux subtracted in 200 components = 0.0150967 Jy
! Clean residual min=-0.001241 max=0.001294 Jy/beam
! Clean residual mean=0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.166957 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 45 components and 0.166957 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.369 mas, bmaj=3.382 mas, bpa=-8.321 degrees
! Estimated noise=0.257775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213269 Jy
! Component: 100  -  total flux cleaned = 0.00333199 Jy
! Component: 150  -  total flux cleaned = 0.00383372 Jy
! Component: 200  -  total flux cleaned = 0.00412155 Jy
! Total flux subtracted in 200 components = 0.00412155 Jy
! Clean residual min=-0.001306 max=0.001282 Jy/beam
! Clean residual mean=0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.171078 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193133 Jy
! Component: 100  -  total flux cleaned = 0.000293332 Jy
! Component: 150  -  total flux cleaned = 0.00033144 Jy
! Component: 200  -  total flux cleaned = 0.000364339 Jy
! Total flux subtracted in 200 components = 0.000364339 Jy
! Clean residual min=-0.001253 max=0.001303 Jy/beam
! Clean residual mean=0.000001 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.171443 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 100 components and 0.171443 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9941 mas, bmaj=2.077 mas, bpa=-3.052 degrees
! Estimated noise=0.212979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327754 Jy
! Component: 100  -  total flux cleaned = 0.000382052 Jy
! Component: 150  -  total flux cleaned = 0.000351814 Jy
! Component: 200  -  total flux cleaned = 0.000309255 Jy
! Total flux subtracted in 200 components = 0.000309255 Jy
! Clean residual min=-0.001114 max=0.001061 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.171752 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 121 components and 0.171752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060796Jy  sigma=1.336793
! Fit after  self-cal, rms=0.060793Jy  sigma=1.336747
wmodel /J1514+0252_X_map.mod
! wmodel: Unable to open new model file: /J1514+0252_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1514+0252_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9941 x 2.077 at -3.052 degrees (North through East)
! Clean map  min=-0.0010622  max=0.13979 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1514+0252_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139785 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270551 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.580644 0.580644 1.16129 2.32257 4.64515 9.2903 18.5806 37.1612 74.3224
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  516.667 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1514+0252_X_dfm.log closed on Thu May 19 23:25:59 2016