! Started logfile: /scr/pima/bg219i_uvs/J1511+0518_X_dfm.log on Thu May 19 23:25:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1511+0518_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1511+0518_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.820635 visibilities/baseline/integration-bin.
! Found source: J1511+0518
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18612 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1511+0518_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.108278Jy  sigma=24.213824
! Fit after  self-cal, rms=0.576000Jy  sigma=12.641062
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7381 mas, bmaj=1.647 mas, bpa=-2.405 degrees
! Estimated noise=0.44243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.303281 Jy
! Component: 100  -  total flux cleaned = 0.421155 Jy
! Total flux subtracted in 100 components = 0.421155 Jy
! Clean residual min=-0.025854 max=0.057237 Jy/beam
! Clean residual mean=-0.000052 rms=0.006710 Jy/beam
! Combined flux in latest and established models = 0.421155 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.421155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.160706Jy  sigma=3.466086
! Fit after  self-cal, rms=0.159926Jy  sigma=3.450365
! Inverting map 
! Added new window around map position (-0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0699588 Jy
! Component: 100  -  total flux cleaned = 0.11299 Jy
! Total flux subtracted in 100 components = 0.11299 Jy
! Clean residual min=-0.017911 max=0.036703 Jy/beam
! Clean residual mean=-0.000033 rms=0.004060 Jy/beam
! Combined flux in latest and established models = 0.534145 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.534145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105603Jy  sigma=2.245189
! Fit after  self-cal, rms=0.104795Jy  sigma=2.230317
! Inverting map 
! Added new window around map position (4.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.038105 Jy
! Component: 100  -  total flux cleaned = 0.0622065 Jy
! Total flux subtracted in 100 components = 0.0622065 Jy
! Clean residual min=-0.012383 max=0.017492 Jy/beam
! Clean residual mean=-0.000021 rms=0.002758 Jy/beam
! Combined flux in latest and established models = 0.596351 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.596351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084364Jy  sigma=1.782812
! Fit after  self-cal, rms=0.083219Jy  sigma=1.754935
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0217227 Jy
! Component: 100  -  total flux cleaned = 0.0359929 Jy
! Total flux subtracted in 100 components = 0.0359929 Jy
! Clean residual min=-0.010238 max=0.013526 Jy/beam
! Clean residual mean=-0.000015 rms=0.002082 Jy/beam
! Combined flux in latest and established models = 0.632344 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.632344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074794Jy  sigma=1.566618
! Fit after  self-cal, rms=0.074347Jy  sigma=1.555607
! Inverting map 
! Added new window around map position (2.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151965 Jy
! Component: 100  -  total flux cleaned = 0.0257129 Jy
! Total flux subtracted in 100 components = 0.0257129 Jy
! Clean residual min=-0.008946 max=0.009436 Jy/beam
! Clean residual mean=-0.000010 rms=0.001661 Jy/beam
! Combined flux in latest and established models = 0.658057 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.658057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070035Jy  sigma=1.460956
! Fit after  self-cal, rms=0.069778Jy  sigma=1.454105
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9584 mas, bmaj=1.961 mas, bpa=-0.5802 degrees
! Estimated noise=0.249417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130997 Jy
! Component: 100  -  total flux cleaned = 0.0216986 Jy
! Component: 150  -  total flux cleaned = 0.0281783 Jy
! Component: 200  -  total flux cleaned = 0.0333439 Jy
! Total flux subtracted in 200 components = 0.0333439 Jy
! Clean residual min=-0.004469 max=0.007078 Jy/beam
! Clean residual mean=-0.000012 rms=0.001103 Jy/beam
! Combined flux in latest and established models = 0.691401 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 62 components and 0.691401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066660Jy  sigma=1.383701
! Fit after  self-cal, rms=0.066408Jy  sigma=1.376727
! Inverting map 
! Added new window around map position (-5.2, 10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00710247 Jy
! Component: 100  -  total flux cleaned = 0.0118322 Jy
! Component: 150  -  total flux cleaned = 0.0150082 Jy
! Component: 200  -  total flux cleaned = 0.0159725 Jy
! Total flux subtracted in 200 components = 0.0159725 Jy
! Clean residual min=-0.003782 max=0.004103 Jy/beam
! Clean residual mean=-0.000007 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.707373 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 76 components and 0.707373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065435Jy  sigma=1.354790
! Fit after  self-cal, rms=0.065366Jy  sigma=1.352543
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9584 x 1.961 at -0.5802 degrees (North through East)
! Clean map  min=-0.0030215  max=0.41137 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.01     
!   LA        0.99     MK        1.04     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.05     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        1.02     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        1.01     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.01     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        1.02     
!   LA        1.00     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.01     MK        0.97     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.05     KP        1.02     
!   LA        1.01     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        1.01     
!   LA        1.01     MK        0.96     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.065366Jy  sigma=1.352543
! Fit after  self-cal, rms=0.065153Jy  sigma=1.340667
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9613 mas, bmaj=1.966 mas, bpa=-0.5792 degrees
! Estimated noise=0.249974 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.6, 44.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00368302 Jy
! Component: 100  -  total flux cleaned = 0.00447319 Jy
! Component: 150  -  total flux cleaned = 0.00485683 Jy
! Component: 200  -  total flux cleaned = 0.00512384 Jy
! Total flux subtracted in 200 components = 0.00512384 Jy
! Clean residual min=-0.003148 max=0.003269 Jy/beam
! Clean residual mean=-0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.712497 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 93 components and 0.712497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064801Jy  sigma=1.332512
! Fit after  self-cal, rms=0.064799Jy  sigma=1.332173
! Inverting map 
! Added new window around map position (0.6, 12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269599 Jy
! Component: 100  -  total flux cleaned = 0.00421946 Jy
! Component: 150  -  total flux cleaned = 0.00461755 Jy
! Component: 200  -  total flux cleaned = 0.00491154 Jy
! Total flux subtracted in 200 components = 0.00491154 Jy
! Clean residual min=-0.002566 max=0.002608 Jy/beam
! Clean residual mean=-0.000002 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.717409 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 113 components and 0.717409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064564Jy  sigma=1.327020
! Fit after  self-cal, rms=0.064556Jy  sigma=1.326757
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064556Jy  sigma=1.326757
! Fit after  self-cal, rms=0.064474Jy  sigma=1.324008
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9603 mas, bmaj=1.965 mas, bpa=-0.6661 degrees
! Estimated noise=0.249934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000551411 Jy
! Component: 100  -  total flux cleaned = 0.000971821 Jy
! Component: 150  -  total flux cleaned = 0.000972791 Jy
! Component: 200  -  total flux cleaned = 0.000972207 Jy
! Total flux subtracted in 200 components = 0.000972207 Jy
! Clean residual min=-0.002333 max=0.002090 Jy/beam
! Clean residual mean=-0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.718381 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 127 components and 0.718381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064341Jy  sigma=1.321216
! Fit after  self-cal, rms=0.064337Jy  sigma=1.321045
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.15732e-05 Jy
! Component: 100  -  total flux cleaned = -9.41827e-07 Jy
! Component: 150  -  total flux cleaned = -0.000104584 Jy
! Component: 200  -  total flux cleaned = -0.000104386 Jy
! Total flux subtracted in 200 components = -0.000104386 Jy
! Clean residual min=-0.002147 max=0.001921 Jy/beam
! Clean residual mean=-0.000002 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.718277 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 133 components and 0.718277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064250Jy  sigma=1.319273
! Fit after  self-cal, rms=0.064248Jy  sigma=1.319153
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064248Jy  sigma=1.319153
! Fit after  self-cal, rms=0.064249Jy  sigma=1.319052
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9602 mas, bmaj=1.965 mas, bpa=-0.6845 degrees
! Estimated noise=0.249956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222554 Jy
! Component: 100  -  total flux cleaned = 0.000123315 Jy
! Component: 150  -  total flux cleaned = -1.22391e-05 Jy
! Component: 200  -  total flux cleaned = -0.000142762 Jy
! Total flux subtracted in 200 components = -0.000142762 Jy
! Clean residual min=-0.001989 max=0.001882 Jy/beam
! Clean residual mean=-0.000002 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.718134 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 136 components and 0.718134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064181Jy  sigma=1.317688
! Fit after  self-cal, rms=0.064179Jy  sigma=1.317586
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.25955e-06 Jy
! Component: 100  -  total flux cleaned = -0.000127172 Jy
! Component: 150  -  total flux cleaned = -0.000203905 Jy
! Component: 200  -  total flux cleaned = -0.000242163 Jy
! Total flux subtracted in 200 components = -0.000242163 Jy
! Clean residual min=-0.001839 max=0.001850 Jy/beam
! Clean residual mean=-0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.717892 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 145 components and 0.717892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064131Jy  sigma=1.316625
! Fit after  self-cal, rms=0.064130Jy  sigma=1.316550
! Inverting map 
! Added new window around map position (15.6, 32.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106231 Jy
! Component: 100  -  total flux cleaned = 0.00138589 Jy
! Component: 150  -  total flux cleaned = 0.0014598 Jy
! Component: 200  -  total flux cleaned = 0.00149456 Jy
! Total flux subtracted in 200 components = 0.00149456 Jy
! Clean residual min=-0.001676 max=0.001602 Jy/beam
! Clean residual mean=-0.000002 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.719386 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 152 components and 0.719386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064072Jy  sigma=1.315353
! Fit after  self-cal, rms=0.064071Jy  sigma=1.315294
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064071Jy  sigma=1.315294
! Fit after  self-cal, rms=0.064060Jy  sigma=1.315192
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.204 mas, bmaj=3.154 mas, bpa=-3.36 degrees
! Estimated noise=0.314067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000855597 Jy
! Component: 100  -  total flux cleaned = 0.00102907 Jy
! Component: 150  -  total flux cleaned = 0.00105269 Jy
! Component: 200  -  total flux cleaned = 0.00101251 Jy
! Total flux subtracted in 200 components = 0.00101251 Jy
! Clean residual min=-0.001667 max=0.001587 Jy/beam
! Clean residual mean=-0.000004 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.720399 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 179 components and 0.720398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064045Jy  sigma=1.314981
! Fit after  self-cal, rms=0.064045Jy  sigma=1.314955
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.67266e-05 Jy
! Component: 100  -  total flux cleaned = 9.14903e-06 Jy
! Component: 150  -  total flux cleaned = -4.27986e-05 Jy
! Component: 200  -  total flux cleaned = -5.92447e-05 Jy
! Total flux subtracted in 200 components = -5.92447e-05 Jy
! Clean residual min=-0.001620 max=0.001551 Jy/beam
! Clean residual mean=-0.000004 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.720339 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 187 components and 0.720339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064036Jy  sigma=1.314811
! Fit after  self-cal, rms=0.064036Jy  sigma=1.314789
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9603 mas, bmaj=1.966 mas, bpa=-0.7024 degrees
! Estimated noise=0.249967 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9603 x 1.966 at -0.7024 degrees (North through East)
! Clean map  min=-0.0014865  max=0.41109 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7389 mas, bmaj=1.649 mas, bpa=-2.561 degrees
! Estimated noise=0.444323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.307129 Jy
! Component: 100  -  total flux cleaned = 0.432187 Jy
! Component: 150  -  total flux cleaned = 0.501632 Jy
! Component: 200  -  total flux cleaned = 0.549254 Jy
! Total flux subtracted in 200 components = 0.549254 Jy
! Clean residual min=-0.012368 max=0.026615 Jy/beam
! Clean residual mean=-0.000029 rms=0.003478 Jy/beam
! Combined flux in latest and established models = 0.549254 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.549254 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9603 mas, bmaj=1.966 mas, bpa=-0.7024 degrees
! Estimated noise=0.249967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0485741 Jy
! Component: 100  -  total flux cleaned = 0.0787089 Jy
! Component: 150  -  total flux cleaned = 0.099379 Jy
! Component: 200  -  total flux cleaned = 0.114176 Jy
! Total flux subtracted in 200 components = 0.114176 Jy
! Clean residual min=-0.005179 max=0.009530 Jy/beam
! Clean residual mean=-0.000027 rms=0.001473 Jy/beam
! Combined flux in latest and established models = 0.66343 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 43 components and 0.66343 Jy
! Inverting map 
! Added new window around map position (0.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112433 Jy
! Component: 100  -  total flux cleaned = 0.0196589 Jy
! Component: 150  -  total flux cleaned = 0.0262242 Jy
! Component: 200  -  total flux cleaned = 0.031525 Jy
! Total flux subtracted in 200 components = 0.031525 Jy
! Clean residual min=-0.002954 max=0.003947 Jy/beam
! Clean residual mean=-0.000011 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.694955 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 69 components and 0.694955 Jy
! Inverting map 
! Added new window around map position (14.4, -9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455662 Jy
! Component: 100  -  total flux cleaned = 0.00832739 Jy
! Component: 150  -  total flux cleaned = 0.0111942 Jy
! Component: 200  -  total flux cleaned = 0.0132693 Jy
! Total flux subtracted in 200 components = 0.0132693 Jy
! Clean residual min=-0.002478 max=0.002783 Jy/beam
! Clean residual mean=-0.000007 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.708224 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 91 components and 0.708224 Jy
! Inverting map 
! Added new window around map position (4.4, -13.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283094 Jy
! Component: 100  -  total flux cleaned = 0.00417927 Jy
! Component: 150  -  total flux cleaned = 0.00559286 Jy
! Component: 200  -  total flux cleaned = 0.00657561 Jy
! Total flux subtracted in 200 components = 0.00657561 Jy
! Clean residual min=-0.002286 max=0.002215 Jy/beam
! Clean residual mean=-0.000004 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.7148 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 107 components and 0.7148 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.204 mas, bmaj=3.154 mas, bpa=-3.36 degrees
! Estimated noise=0.314067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021847 Jy
! Component: 100  -  total flux cleaned = 0.00368258 Jy
! Component: 150  -  total flux cleaned = 0.00483485 Jy
! Component: 200  -  total flux cleaned = 0.0057328 Jy
! Total flux subtracted in 200 components = 0.0057328 Jy
! Clean residual min=-0.002052 max=0.001653 Jy/beam
! Clean residual mean=-0.000005 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.720532 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391646 Jy
! Component: 100  -  total flux cleaned = 0.000750063 Jy
! Component: 150  -  total flux cleaned = 0.00110776 Jy
! Component: 200  -  total flux cleaned = 0.00143993 Jy
! Total flux subtracted in 200 components = 0.00143993 Jy
! Clean residual min=-0.001866 max=0.001670 Jy/beam
! Clean residual mean=-0.000004 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.721972 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 145 components and 0.721973 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9603 mas, bmaj=1.966 mas, bpa=-0.7024 degrees
! Estimated noise=0.249967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00138328 Jy
! Component: 100  -  total flux cleaned = -0.0013843 Jy
! Component: 150  -  total flux cleaned = -0.00119865 Jy
! Component: 200  -  total flux cleaned = -0.00096988 Jy
! Total flux subtracted in 200 components = -0.00096988 Jy
! Clean residual min=-0.001818 max=0.001750 Jy/beam
! Clean residual mean=-0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.721003 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 162 components and 0.721003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064143Jy  sigma=1.317465
! Fit after  self-cal, rms=0.064086Jy  sigma=1.316004
wmodel /J1511+0518_X_map.mod
! wmodel: Unable to open new model file: /J1511+0518_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1511+0518_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9603 x 1.966 at -0.7024 degrees (North through East)
! Clean map  min=-0.0015338  max=0.41147 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1511+0518_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.411474 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000382383 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.27879 0.27879 0.55758 1.11516 2.23032 4.46064 8.92128 17.8426 35.6851 71.3703
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.411 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1076.08 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1511+0518_X_dfm.log closed on Thu May 19 23:25:43 2016