! Started logfile: /scr/pima/bg219i_uvs/J1458+0416_S_dfm.log on Thu May 19 23:24:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1458+0416_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1458+0416_S_uva.fits
! AN table 1: 7 integrations on 28 of 28 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1458+0416
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1458+0416_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026287Jy  sigma=21.157734
! Fit after  self-cal, rms=0.798574Jy  sigma=16.364474
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.371 mas, bmaj=13.14 mas, bpa=-26.66 degrees
! Estimated noise=1.76308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.158078 Jy
! Component: 100  -  total flux cleaned = 0.192598 Jy
! Total flux subtracted in 100 components = 0.192598 Jy
! Clean residual min=-0.007709 max=0.010299 Jy/beam
! Clean residual mean=0.000008 rms=0.002425 Jy/beam
! Combined flux in latest and established models = 0.192598 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.192598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057543Jy  sigma=1.169670
! Fit after  self-cal, rms=0.057519Jy  sigma=1.169353
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.012 mas, bmaj=13.96 mas, bpa=-24.87 degrees
! Estimated noise=1.36126 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104824 Jy
! Component: 100  -  total flux cleaned = 0.0156329 Jy
! Component: 150  -  total flux cleaned = 0.0169732 Jy
! Component: 200  -  total flux cleaned = 0.0172732 Jy
! Total flux subtracted in 200 components = 0.0172732 Jy
! Clean residual min=-0.005160 max=0.006881 Jy/beam
! Clean residual mean=-0.000003 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 0.209871 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 26 components and 0.209871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055602Jy  sigma=1.130205
! Fit after  self-cal, rms=0.055612Jy  sigma=1.129916
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.012 x 13.96 at -24.87 degrees (North through East)
! Clean map  min=-0.0051225  max=0.2036 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     KP        1.05     LA        0.93     
!   MK        0.99     NL        1.01     OV        1.03     PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     KP        1.04     LA        0.98     
!   MK        0.99     NL        0.98     OV        0.97     PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     KP        1.07     LA        0.98     
!   MK        1.05     NL        0.97     OV        0.97     PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     KP        1.08     LA        0.98     
!   MK        1.02     NL        0.96     OV        1.02     PT        0.99     
! 
! 
! Fit before self-cal, rms=0.055612Jy  sigma=1.129916
! Fit after  self-cal, rms=0.054885Jy  sigma=1.109987
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.027 mas, bmaj=13.98 mas, bpa=-24.8 degrees
! Estimated noise=1.35234 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012656 Jy
! Component: 100  -  total flux cleaned = -0.00142663 Jy
! Component: 150  -  total flux cleaned = -0.00138381 Jy
! Component: 200  -  total flux cleaned = -0.00134587 Jy
! Total flux subtracted in 200 components = -0.00134587 Jy
! Clean residual min=-0.005070 max=0.004812 Jy/beam
! Clean residual mean=-0.000012 rms=0.001331 Jy/beam
! Combined flux in latest and established models = 0.208525 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.208525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054789Jy  sigma=1.108362
! Fit after  self-cal, rms=0.054809Jy  sigma=1.108185
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054809Jy  sigma=1.108185
! Fit after  self-cal, rms=0.054754Jy  sigma=1.108064
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.028 mas, bmaj=13.98 mas, bpa=-24.81 degrees
! Estimated noise=1.35102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000848647 Jy
! Component: 100  -  total flux cleaned = -0.000884701 Jy
! Component: 150  -  total flux cleaned = -0.000819293 Jy
! Component: 200  -  total flux cleaned = -0.00078927 Jy
! Total flux subtracted in 200 components = -0.00078927 Jy
! Clean residual min=-0.004892 max=0.004796 Jy/beam
! Clean residual mean=-0.000012 rms=0.001317 Jy/beam
! Combined flux in latest and established models = 0.207736 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 46 components and 0.207736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054702Jy  sigma=1.107370
! Fit after  self-cal, rms=0.054706Jy  sigma=1.107332
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.8967e-05 Jy
! Component: 100  -  total flux cleaned = 6.63329e-05 Jy
! Component: 150  -  total flux cleaned = 9.13942e-05 Jy
! Component: 200  -  total flux cleaned = 0.000137463 Jy
! Total flux subtracted in 200 components = 0.000137463 Jy
! Clean residual min=-0.004830 max=0.004800 Jy/beam
! Clean residual mean=-0.000012 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.207873 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 55 components and 0.207873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054684Jy  sigma=1.106892
! Fit after  self-cal, rms=0.054686Jy  sigma=1.106869
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054686Jy  sigma=1.106869
! Fit after  self-cal, rms=0.054569Jy  sigma=1.106724
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.025 mas, bmaj=13.98 mas, bpa=-24.82 degrees
! Estimated noise=1.34869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000602293 Jy
! Component: 100  -  total flux cleaned = -0.000575589 Jy
! Component: 150  -  total flux cleaned = -0.000527953 Jy
! Component: 200  -  total flux cleaned = -0.000528673 Jy
! Total flux subtracted in 200 components = -0.000528673 Jy
! Clean residual min=-0.004795 max=0.004774 Jy/beam
! Clean residual mean=-0.000012 rms=0.001299 Jy/beam
! Combined flux in latest and established models = 0.207344 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.207344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054540Jy  sigma=1.106373
! Fit after  self-cal, rms=0.054540Jy  sigma=1.106359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.939e-05 Jy
! Component: 100  -  total flux cleaned = 5.01106e-05 Jy
! Component: 150  -  total flux cleaned = 4.97765e-05 Jy
! Component: 200  -  total flux cleaned = 4.95621e-05 Jy
! Total flux subtracted in 200 components = 4.95621e-05 Jy
! Clean residual min=-0.004776 max=0.004780 Jy/beam
! Clean residual mean=-0.000012 rms=0.001295 Jy/beam
! Combined flux in latest and established models = 0.207394 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.207394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054526Jy  sigma=1.106079
! Fit after  self-cal, rms=0.054526Jy  sigma=1.106070
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054526Jy  sigma=1.106070
! Fit after  self-cal, rms=0.054396Jy  sigma=1.105946
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.426 mas, bmaj=13.82 mas, bpa=-25.58 degrees
! Estimated noise=1.48862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.08979e-06 Jy
! Component: 100  -  total flux cleaned = 9.16454e-06 Jy
! Component: 150  -  total flux cleaned = 9.35581e-06 Jy
! Component: 200  -  total flux cleaned = 9.21021e-06 Jy
! Total flux subtracted in 200 components = 9.21021e-06 Jy
! Clean residual min=-0.004607 max=0.004752 Jy/beam
! Clean residual mean=-0.000020 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.207403 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.207403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054380Jy  sigma=1.105912
! Fit after  self-cal, rms=0.054379Jy  sigma=1.105907
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.52998e-05 Jy
! Component: 100  -  total flux cleaned = 2.65711e-05 Jy
! Component: 150  -  total flux cleaned = 3.75444e-05 Jy
! Component: 200  -  total flux cleaned = 5.89128e-05 Jy
! Total flux subtracted in 200 components = 5.89128e-05 Jy
! Clean residual min=-0.004573 max=0.004750 Jy/beam
! Clean residual mean=-0.000019 rms=0.001445 Jy/beam
! Combined flux in latest and established models = 0.207462 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 81 components and 0.207462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054372Jy  sigma=1.105895
! Fit after  self-cal, rms=0.054372Jy  sigma=1.105893
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.022 mas, bmaj=13.97 mas, bpa=-24.84 degrees
! Estimated noise=1.34587 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.022 x 13.97 at -24.84 degrees (North through East)
! Clean map  min=-0.0046322  max=0.2026 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.379 mas, bmaj=13.11 mas, bpa=-26.68 degrees
! Estimated noise=1.74124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.156091 Jy
! Component: 100  -  total flux cleaned = 0.190219 Jy
! Component: 150  -  total flux cleaned = 0.199871 Jy
! Component: 200  -  total flux cleaned = 0.204469 Jy
! Total flux subtracted in 200 components = 0.204469 Jy
! Clean residual min=-0.006581 max=0.006735 Jy/beam
! Clean residual mean=-0.000007 rms=0.001824 Jy/beam
! Combined flux in latest and established models = 0.204469 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.204469 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.022 mas, bmaj=13.97 mas, bpa=-24.84 degrees
! Estimated noise=1.34587 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112854 Jy
! Component: 100  -  total flux cleaned = 0.00146334 Jy
! Component: 150  -  total flux cleaned = 0.00155401 Jy
! Component: 200  -  total flux cleaned = 0.00162944 Jy
! Total flux subtracted in 200 components = 0.00162944 Jy
! Clean residual min=-0.004661 max=0.004552 Jy/beam
! Clean residual mean=-0.000012 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 0.206098 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.206098 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.426 mas, bmaj=13.82 mas, bpa=-25.58 degrees
! Estimated noise=1.48862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103649 Jy
! Component: 100  -  total flux cleaned = 0.00128002 Jy
! Component: 150  -  total flux cleaned = 0.0012526 Jy
! Component: 200  -  total flux cleaned = 0.00122832 Jy
! Total flux subtracted in 200 components = 0.00122832 Jy
! Clean residual min=-0.004656 max=0.004771 Jy/beam
! Clean residual mean=-0.000020 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 0.207326 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.22836e-05 Jy
! Component: 100  -  total flux cleaned = -5.97302e-05 Jy
! Component: 150  -  total flux cleaned = -7.66138e-05 Jy
! Component: 200  -  total flux cleaned = -9.1958e-05 Jy
! Total flux subtracted in 200 components = -9.1958e-05 Jy
! Clean residual min=-0.004643 max=0.004839 Jy/beam
! Clean residual mean=-0.000020 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.207235 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 57 components and 0.207234 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.022 mas, bmaj=13.97 mas, bpa=-24.84 degrees
! Estimated noise=1.34587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.60008e-05 Jy
! Component: 100  -  total flux cleaned = -3.6854e-05 Jy
! Component: 150  -  total flux cleaned = -7.0937e-05 Jy
! Component: 200  -  total flux cleaned = -0.000134893 Jy
! Total flux subtracted in 200 components = -0.000134893 Jy
! Clean residual min=-0.004821 max=0.004767 Jy/beam
! Clean residual mean=-0.000013 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.2071 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 69 components and 0.2071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054432Jy  sigma=1.107008
! Fit after  self-cal, rms=0.054430Jy  sigma=1.106974
wmodel /J1458+0416_S_map.mod
! wmodel: Unable to open new model file: /J1458+0416_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1458+0416_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.022 x 13.97 at -24.84 degrees (North through East)
! Clean map  min=-0.0046177  max=0.20237 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1458+0416_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.202369 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00129989 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.92701 1.92701 3.85401 7.70802 15.416 30.8321 61.6642
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0038 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.202 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  155.681 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1458+0416_S_dfm.log closed on Thu May 19 23:24:46 2016