! Started logfile: /scr/pima/bg219i_uvs/J1451-0127_X_dfm.log on Thu May 19 23:24:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1451-0127_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1451-0127_X_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.890432 visibilities/baseline/integration-bin.
! Found source: J1451-0127
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13848 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1451-0127_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015229Jy  sigma=25.595131
! Fit after  self-cal, rms=0.849459Jy  sigma=21.383540
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7748 mas, bmaj=1.625 mas, bpa=-0.9111 degrees
! Estimated noise=0.387399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103877 Jy
! Component: 100  -  total flux cleaned = 0.140783 Jy
! Total flux subtracted in 100 components = 0.140783 Jy
! Clean residual min=-0.007104 max=0.018267 Jy/beam
! Clean residual mean=0.000000 rms=0.002109 Jy/beam
! Combined flux in latest and established models = 0.140783 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.140783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070944Jy  sigma=1.741342
! Fit after  self-cal, rms=0.070811Jy  sigma=1.737625
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212341 Jy
! Component: 100  -  total flux cleaned = 0.0333966 Jy
! Total flux subtracted in 100 components = 0.0333966 Jy
! Clean residual min=-0.004140 max=0.008600 Jy/beam
! Clean residual mean=-0.000001 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.174179 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.174179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060169Jy  sigma=1.460525
! Fit after  self-cal, rms=0.060132Jy  sigma=1.459116
! Inverting map 
! Added new window around map position (1.6, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00906414 Jy
! Component: 100  -  total flux cleaned = 0.0150013 Jy
! Total flux subtracted in 100 components = 0.0150013 Jy
! Clean residual min=-0.003647 max=0.005007 Jy/beam
! Clean residual mean=-0.000001 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.18918 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 0.18918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057716Jy  sigma=1.395819
! Fit after  self-cal, rms=0.057641Jy  sigma=1.393508
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9634 mas, bmaj=2.033 mas, bpa=-2.121 degrees
! Estimated noise=0.259407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00827302 Jy
! Component: 100  -  total flux cleaned = 0.0130726 Jy
! Component: 150  -  total flux cleaned = 0.0161109 Jy
! Component: 200  -  total flux cleaned = 0.0180783 Jy
! Total flux subtracted in 200 components = 0.0180783 Jy
! Clean residual min=-0.002631 max=0.002872 Jy/beam
! Clean residual mean=-0.000001 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.207259 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 54 components and 0.207259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056419Jy  sigma=1.360371
! Fit after  self-cal, rms=0.056356Jy  sigma=1.358676
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9634 x 2.033 at -2.121 degrees (North through East)
! Clean map  min=-0.0024865  max=0.1464 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     KP        1.02     LA        0.98     
!   MK        1.05     NL        1.02     OV        0.99     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     KP        0.97     LA        1.01     
!   MK        0.98     NL        1.00     OV        0.99     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        1.01     LA        0.99     
!   MK        0.98     NL        1.03     OV        0.95     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        1.01     LA        1.00     
!   MK        1.05     NL        1.00     OV        0.99     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        1.01     LA        0.99     
!   MK        1.01     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        1.00     LA        1.00     
!   MK        0.98     NL        1.02     OV        0.99     PT        1.03     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     KP        1.00     LA        1.02     
!   MK        0.98     NL        1.01     OV        0.99     PT        1.01     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     KP        1.01     LA        1.00     
!   MK        0.99     NL        0.98     OV        0.97     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     KP        1.02     LA        1.01     
!   MK        1.04     NL        1.02     OV        0.99     PT        1.01     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     KP        1.01     LA        0.99     
!   MK        0.96     NL        1.04     OV        0.97     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     KP        0.99     LA        1.00     
!   MK        1.05     NL        1.00     OV        0.99     PT        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     KP        1.00     LA        0.98     
!   MK        1.08     NL        1.04     OV        0.95     PT        1.01     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.056356Jy  sigma=1.358676
! Fit after  self-cal, rms=0.056108Jy  sigma=1.353517
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9671 mas, bmaj=2.036 mas, bpa=-1.961 degrees
! Estimated noise=0.258666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172555 Jy
! Component: 100  -  total flux cleaned = 0.00164745 Jy
! Component: 150  -  total flux cleaned = 0.00158435 Jy
! Component: 200  -  total flux cleaned = 0.0015556 Jy
! Total flux subtracted in 200 components = 0.0015556 Jy
! Clean residual min=-0.002268 max=0.002650 Jy/beam
! Clean residual mean=-0.000001 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.208814 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 68 components and 0.208814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056051Jy  sigma=1.351609
! Fit after  self-cal, rms=0.056045Jy  sigma=1.351318
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056045Jy  sigma=1.351318
! Fit after  self-cal, rms=0.055987Jy  sigma=1.347145
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.967 mas, bmaj=2.036 mas, bpa=-1.986 degrees
! Estimated noise=0.258798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754681 Jy
! Component: 100  -  total flux cleaned = 0.000759825 Jy
! Component: 150  -  total flux cleaned = 0.000744333 Jy
! Component: 200  -  total flux cleaned = 0.000730775 Jy
! Total flux subtracted in 200 components = 0.000730775 Jy
! Clean residual min=-0.002041 max=0.002619 Jy/beam
! Clean residual mean=-0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.209545 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 74 components and 0.209545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055974Jy  sigma=1.346652
! Fit after  self-cal, rms=0.055974Jy  sigma=1.346556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268296 Jy
! Component: 100  -  total flux cleaned = 0.00424631 Jy
! Component: 150  -  total flux cleaned = 0.00527538 Jy
! Component: 200  -  total flux cleaned = 0.00602268 Jy
! Total flux subtracted in 200 components = 0.00602268 Jy
! Clean residual min=-0.001845 max=0.002302 Jy/beam
! Clean residual mean=-0.000002 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.215568 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 110 components and 0.215568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055838Jy  sigma=1.342948
! Fit after  self-cal, rms=0.055830Jy  sigma=1.342695
! Inverting map 
! Added new window around map position (-6.8, -20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184397 Jy
! Component: 100  -  total flux cleaned = 0.00278649 Jy
! Component: 150  -  total flux cleaned = 0.00356271 Jy
! Component: 200  -  total flux cleaned = 0.0042445 Jy
! Total flux subtracted in 200 components = 0.0042445 Jy
! Clean residual min=-0.001802 max=0.001669 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.219812 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 0.219812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055758Jy  sigma=1.340947
! Fit after  self-cal, rms=0.055757Jy  sigma=1.340891
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055757Jy  sigma=1.340891
! Fit after  self-cal, rms=0.055748Jy  sigma=1.340430
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9683 mas, bmaj=2.039 mas, bpa=-2.055 degrees
! Estimated noise=0.258563 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000922432 Jy
! Component: 100  -  total flux cleaned = 0.0016059 Jy
! Component: 150  -  total flux cleaned = 0.00219159 Jy
! Component: 200  -  total flux cleaned = 0.00266851 Jy
! Total flux subtracted in 200 components = 0.00266851 Jy
! Clean residual min=-0.001684 max=0.001566 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.222481 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 149 components and 0.222481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055724Jy  sigma=1.339848
! Fit after  self-cal, rms=0.055727Jy  sigma=1.339822
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391151 Jy
! Component: 100  -  total flux cleaned = 0.000687738 Jy
! Component: 150  -  total flux cleaned = 0.000978806 Jy
! Component: 200  -  total flux cleaned = 0.00121713 Jy
! Total flux subtracted in 200 components = 0.00121713 Jy
! Clean residual min=-0.001647 max=0.001525 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.223698 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 159 components and 0.223698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055716Jy  sigma=1.339583
! Fit after  self-cal, rms=0.055717Jy  sigma=1.339573
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055717Jy  sigma=1.339573
! Fit after  self-cal, rms=0.055720Jy  sigma=1.339496
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.373 mas, bmaj=3.635 mas, bpa=8.382 degrees
! Estimated noise=0.323394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903343 Jy
! Component: 100  -  total flux cleaned = 0.00155978 Jy
! Component: 150  -  total flux cleaned = 0.0020803 Jy
! Component: 200  -  total flux cleaned = 0.00247389 Jy
! Total flux subtracted in 200 components = 0.00247389 Jy
! Clean residual min=-0.002249 max=0.002199 Jy/beam
! Clean residual mean=-0.000002 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.226172 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 170 components and 0.226172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055719Jy  sigma=1.339385
! Fit after  self-cal, rms=0.055719Jy  sigma=1.339358
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209806 Jy
! Component: 100  -  total flux cleaned = 0.000359707 Jy
! Component: 150  -  total flux cleaned = 0.000497593 Jy
! Component: 200  -  total flux cleaned = 0.000613167 Jy
! Total flux subtracted in 200 components = 0.000613167 Jy
! Clean residual min=-0.002258 max=0.002188 Jy/beam
! Clean residual mean=-0.000002 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.226785 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 180 components and 0.226785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055719Jy  sigma=1.339359
! Fit after  self-cal, rms=0.055719Jy  sigma=1.339351
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9685 mas, bmaj=2.039 mas, bpa=-2.099 degrees
! Estimated noise=0.258578 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9685 x 2.039 at -2.099 degrees (North through East)
! Clean map  min=-0.0015322  max=0.14601 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7782 mas, bmaj=1.63 mas, bpa=-0.8514 degrees
! Estimated noise=0.388886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104203 Jy
! Component: 100  -  total flux cleaned = 0.140835 Jy
! Component: 150  -  total flux cleaned = 0.161753 Jy
! Component: 200  -  total flux cleaned = 0.174601 Jy
! Total flux subtracted in 200 components = 0.174601 Jy
! Clean residual min=-0.003891 max=0.006747 Jy/beam
! Clean residual mean=-0.000001 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.174601 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.174601 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9685 mas, bmaj=2.039 mas, bpa=-2.099 degrees
! Estimated noise=0.258578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140804 Jy
! Component: 100  -  total flux cleaned = 0.0219816 Jy
! Component: 150  -  total flux cleaned = 0.0267402 Jy
! Component: 200  -  total flux cleaned = 0.0302845 Jy
! Total flux subtracted in 200 components = 0.0302845 Jy
! Clean residual min=-0.002413 max=0.002602 Jy/beam
! Clean residual mean=-0.000000 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.204885 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 50 components and 0.204885 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.373 mas, bmaj=3.635 mas, bpa=8.382 degrees
! Estimated noise=0.323394 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045759 Jy
! Component: 100  -  total flux cleaned = 0.00776313 Jy
! Component: 150  -  total flux cleaned = 0.0100718 Jy
! Component: 200  -  total flux cleaned = 0.0118062 Jy
! Total flux subtracted in 200 components = 0.0118062 Jy
! Clean residual min=-0.002550 max=0.002453 Jy/beam
! Clean residual mean=-0.000002 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.216691 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00141686 Jy
! Component: 100  -  total flux cleaned = 0.00261997 Jy
! Component: 150  -  total flux cleaned = 0.00365568 Jy
! Component: 200  -  total flux cleaned = 0.00456289 Jy
! Total flux subtracted in 200 components = 0.00456289 Jy
! Clean residual min=-0.002393 max=0.002298 Jy/beam
! Clean residual mean=-0.000001 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.221254 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 113 components and 0.221254 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9685 mas, bmaj=2.039 mas, bpa=-2.099 degrees
! Estimated noise=0.258578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112511 Jy
! Component: 100  -  total flux cleaned = 0.00145604 Jy
! Component: 150  -  total flux cleaned = 0.00182163 Jy
! Component: 200  -  total flux cleaned = 0.00207597 Jy
! Total flux subtracted in 200 components = 0.00207597 Jy
! Clean residual min=-0.001700 max=0.001631 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.22333 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.22333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055769Jy  sigma=1.340538
! Fit after  self-cal, rms=0.055754Jy  sigma=1.340284
wmodel /J1451-0127_X_map.mod
! wmodel: Unable to open new model file: /J1451-0127_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1451-0127_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9685 x 2.039 at -2.099 degrees (North through East)
! Clean map  min=-0.0016089  max=0.1464 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1451-0127_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.146402 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000409083 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.838276 0.838276 1.67655 3.3531 6.70621 13.4124 26.8248 53.6497
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  357.877 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1451-0127_X_dfm.log closed on Thu May 19 23:24:43 2016