! Started logfile: /scr/pima/bg219i_uvs/J1421-0643_X_dfm.log on Thu May 19 23:24:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1421-0643_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1421-0643_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.845899 visibilities/baseline/integration-bin.
! Found source: J1421-0643
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15348 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1421-0643_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008009Jy  sigma=24.844595
! Fit after  self-cal, rms=0.901765Jy  sigma=22.216511
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6941 mas, bmaj=1.652 mas, bpa=0.5139 degrees
! Estimated noise=0.383046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0655602 Jy
! Component: 100  -  total flux cleaned = 0.0909653 Jy
! Total flux subtracted in 100 components = 0.0909653 Jy
! Clean residual min=-0.007323 max=0.019611 Jy/beam
! Clean residual mean=0.000008 rms=0.002260 Jy/beam
! Combined flux in latest and established models = 0.0909653 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0909653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074242Jy  sigma=1.784094
! Fit after  self-cal, rms=0.073746Jy  sigma=1.773068
! Inverting map 
! Added new window around map position (2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194541 Jy
! Component: 100  -  total flux cleaned = 0.0311614 Jy
! Total flux subtracted in 100 components = 0.0311614 Jy
! Clean residual min=-0.005392 max=0.012033 Jy/beam
! Clean residual mean=0.000006 rms=0.001626 Jy/beam
! Combined flux in latest and established models = 0.122127 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.122127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064772Jy  sigma=1.547221
! Fit after  self-cal, rms=0.064519Jy  sigma=1.539752
! Inverting map 
! Added new window around map position (3.6, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120287 Jy
! Component: 100  -  total flux cleaned = 0.0204138 Jy
! Total flux subtracted in 100 components = 0.0204138 Jy
! Clean residual min=-0.004226 max=0.007944 Jy/beam
! Clean residual mean=0.000004 rms=0.001209 Jy/beam
! Combined flux in latest and established models = 0.142541 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 37 components and 0.142541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060576Jy  sigma=1.437263
! Fit after  self-cal, rms=0.060382Jy  sigma=1.431102
! Inverting map 
! Added new window around map position (4.8, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00841067 Jy
! Component: 100  -  total flux cleaned = 0.0145921 Jy
! Total flux subtracted in 100 components = 0.0145921 Jy
! Clean residual min=-0.003444 max=0.005020 Jy/beam
! Clean residual mean=0.000003 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.157133 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.157133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058341Jy  sigma=1.377124
! Fit after  self-cal, rms=0.058269Jy  sigma=1.374780
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9141 mas, bmaj=2.04 mas, bpa=0.4757 degrees
! Estimated noise=0.245404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00897535 Jy
! Component: 100  -  total flux cleaned = 0.0147315 Jy
! Component: 150  -  total flux cleaned = 0.01874 Jy
! Component: 200  -  total flux cleaned = 0.0216521 Jy
! Total flux subtracted in 200 components = 0.0216521 Jy
! Clean residual min=-0.002435 max=0.003697 Jy/beam
! Clean residual mean=0.000004 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.178785 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 79 components and 0.178785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056702Jy  sigma=1.332442
! Fit after  self-cal, rms=0.056594Jy  sigma=1.329321
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9141 x 2.04 at 0.4757 degrees (North through East)
! Clean map  min=-0.0021853  max=0.09103 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     KP        0.98     LA        0.95     
!   MK        1.04     NL        1.05     OV        0.98     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     KP        0.99     LA        0.97     
!   MK        1.00     NL        1.05     OV        0.96     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     KP        1.00     LA        0.97     
!   MK        1.02     NL        1.06     OV        0.96     PT        0.98     
!   SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     KP        1.00     LA        0.98     
!   MK        0.94     NL        1.11     OV        1.00     PT        0.99     
!   SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     KP        1.02     LA        0.96     
!   MK        1.02     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        1.00     LA        0.95     
!   MK        0.98     NL        1.02     OV        0.98     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     KP        1.02     LA        0.99     
!   MK        1.00     NL        1.06     OV        1.01     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     KP        1.05     LA        0.96     
!   MK        0.95     NL        1.05     OV        0.92     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     KP        1.01     LA        0.97     
!   MK        0.96     NL        1.04     OV        0.94     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     KP        1.02     LA        0.99     
!   MK        0.89     NL        1.01     OV        0.95     PT        1.01     
!   SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        1.02     LA        0.99     
!   MK        0.98     NL        1.03     OV        0.98     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     KP        0.99     LA        0.97     
!   MK        1.06     NL        1.03     OV        0.97     PT        0.96     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.056594Jy  sigma=1.329321
! Fit after  self-cal, rms=0.055831Jy  sigma=1.322324
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9174 mas, bmaj=2.047 mas, bpa=0.2181 degrees
! Estimated noise=0.242442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217756 Jy
! Component: 100  -  total flux cleaned = 0.00262937 Jy
! Component: 150  -  total flux cleaned = 0.00292925 Jy
! Component: 200  -  total flux cleaned = 0.00300181 Jy
! Total flux subtracted in 200 components = 0.00300181 Jy
! Clean residual min=-0.001704 max=0.001866 Jy/beam
! Clean residual mean=0.000002 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.181787 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 98 components and 0.181787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055728Jy  sigma=1.319422
! Fit after  self-cal, rms=0.055725Jy  sigma=1.319043
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055725Jy  sigma=1.319043
! Fit after  self-cal, rms=0.055899Jy  sigma=1.315453
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9156 mas, bmaj=2.048 mas, bpa=0.1984 degrees
! Estimated noise=0.242198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000951464 Jy
! Component: 100  -  total flux cleaned = 0.00112042 Jy
! Component: 150  -  total flux cleaned = 0.00106604 Jy
! Component: 200  -  total flux cleaned = 0.00104197 Jy
! Total flux subtracted in 200 components = 0.00104197 Jy
! Clean residual min=-0.001578 max=0.001648 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.182829 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 114 components and 0.182829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055865Jy  sigma=1.314511
! Fit after  self-cal, rms=0.055859Jy  sigma=1.314257
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.8, 19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137185 Jy
! Component: 100  -  total flux cleaned = 0.0016331 Jy
! Component: 150  -  total flux cleaned = 0.00165967 Jy
! Component: 200  -  total flux cleaned = 0.00166071 Jy
! Total flux subtracted in 200 components = 0.00166071 Jy
! Clean residual min=-0.001465 max=0.001439 Jy/beam
! Clean residual mean=0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.184489 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 0.184489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055818Jy  sigma=1.313305
! Fit after  self-cal, rms=0.055795Jy  sigma=1.312651
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055795Jy  sigma=1.312651
! Fit after  self-cal, rms=0.055805Jy  sigma=1.312565
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9151 mas, bmaj=2.048 mas, bpa=0.2403 degrees
! Estimated noise=0.241938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558424 Jy
! Component: 100  -  total flux cleaned = 0.000646404 Jy
! Component: 150  -  total flux cleaned = 0.000664905 Jy
! Component: 200  -  total flux cleaned = 0.000647764 Jy
! Total flux subtracted in 200 components = 0.000647764 Jy
! Clean residual min=-0.001411 max=0.001404 Jy/beam
! Clean residual mean=0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.185137 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.185137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055791Jy  sigma=1.312190
! Fit after  self-cal, rms=0.055790Jy  sigma=1.312151
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123391 Jy
! Component: 100  -  total flux cleaned = 0.000173956 Jy
! Component: 150  -  total flux cleaned = 0.000172801 Jy
! Component: 200  -  total flux cleaned = 0.000158146 Jy
! Total flux subtracted in 200 components = 0.000158146 Jy
! Clean residual min=-0.001389 max=0.001392 Jy/beam
! Clean residual mean=0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.185295 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 137 components and 0.185295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055782Jy  sigma=1.311932
! Fit after  self-cal, rms=0.055780Jy  sigma=1.311909
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055780Jy  sigma=1.311909
! Fit after  self-cal, rms=0.055800Jy  sigma=1.311883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.47 mas, bmaj=3.846 mas, bpa=15.94 degrees
! Estimated noise=0.30238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266087 Jy
! Component: 100  -  total flux cleaned = 0.000362109 Jy
! Component: 150  -  total flux cleaned = 0.00041752 Jy
! Component: 200  -  total flux cleaned = 0.00046474 Jy
! Total flux subtracted in 200 components = 0.00046474 Jy
! Clean residual min=-0.001723 max=0.001681 Jy/beam
! Clean residual mean=0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.18576 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 152 components and 0.18576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055797Jy  sigma=1.311810
! Fit after  self-cal, rms=0.055798Jy  sigma=1.311785
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.90416e-05 Jy
! Component: 100  -  total flux cleaned = 7.98493e-05 Jy
! Component: 150  -  total flux cleaned = 7.24413e-05 Jy
! Component: 200  -  total flux cleaned = 6.52215e-05 Jy
! Total flux subtracted in 200 components = 6.52215e-05 Jy
! Clean residual min=-0.001714 max=0.001661 Jy/beam
! Clean residual mean=0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.185825 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 159 components and 0.185825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055797Jy  sigma=1.311756
! Fit after  self-cal, rms=0.055796Jy  sigma=1.311741
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9148 mas, bmaj=2.049 mas, bpa=0.2324 degrees
! Estimated noise=0.241787 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9148 x 2.049 at 0.2324 degrees (North through East)
! Clean map  min=-0.0013116  max=0.08899 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.694 mas, bmaj=1.657 mas, bpa=0.3142 degrees
! Estimated noise=0.37715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0647476 Jy
! Component: 100  -  total flux cleaned = 0.093247 Jy
! Component: 150  -  total flux cleaned = 0.111714 Jy
! Component: 200  -  total flux cleaned = 0.125599 Jy
! Total flux subtracted in 200 components = 0.125599 Jy
! Clean residual min=-0.004467 max=0.008130 Jy/beam
! Clean residual mean=0.000005 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.125599 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.125599 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9148 mas, bmaj=2.049 mas, bpa=0.2324 degrees
! Estimated noise=0.241787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184808 Jy
! Component: 100  -  total flux cleaned = 0.0302747 Jy
! Component: 150  -  total flux cleaned = 0.038138 Jy
! Component: 200  -  total flux cleaned = 0.0435181 Jy
! Total flux subtracted in 200 components = 0.0435181 Jy
! Clean residual min=-0.002407 max=0.003228 Jy/beam
! Clean residual mean=0.000005 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.169117 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 58 components and 0.169117 Jy
! Inverting map 
! Added new window around map position (-1, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0038159 Jy
! Component: 100  -  total flux cleaned = 0.00654068 Jy
! Component: 150  -  total flux cleaned = 0.00865287 Jy
! Component: 200  -  total flux cleaned = 0.0103438 Jy
! Total flux subtracted in 200 components = 0.0103438 Jy
! Clean residual min=-0.001831 max=0.001641 Jy/beam
! Clean residual mean=0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.179461 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 94 components and 0.179461 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.47 mas, bmaj=3.846 mas, bpa=15.94 degrees
! Estimated noise=0.30238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206069 Jy
! Component: 100  -  total flux cleaned = 0.00340937 Jy
! Component: 150  -  total flux cleaned = 0.00438127 Jy
! Component: 200  -  total flux cleaned = 0.00493417 Jy
! Total flux subtracted in 200 components = 0.00493417 Jy
! Clean residual min=-0.001843 max=0.001657 Jy/beam
! Clean residual mean=0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.184395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334696 Jy
! Component: 100  -  total flux cleaned = 0.000516609 Jy
! Component: 150  -  total flux cleaned = 0.000623299 Jy
! Component: 200  -  total flux cleaned = 0.00071677 Jy
! Total flux subtracted in 200 components = 0.00071677 Jy
! Clean residual min=-0.001733 max=0.001634 Jy/beam
! Clean residual mean=0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.185112 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 142 components and 0.185112 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9148 mas, bmaj=2.049 mas, bpa=0.2324 degrees
! Estimated noise=0.241787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183775 Jy
! Component: 100  -  total flux cleaned = 0.000211038 Jy
! Component: 150  -  total flux cleaned = 0.000259621 Jy
! Component: 200  -  total flux cleaned = 0.000303571 Jy
! Total flux subtracted in 200 components = 0.000303571 Jy
! Clean residual min=-0.001409 max=0.001368 Jy/beam
! Clean residual mean=0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.185416 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 161 components and 0.185416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055801Jy  sigma=1.311903
! Fit after  self-cal, rms=0.055788Jy  sigma=1.311537
wmodel /J1421-0643_X_map.mod
! wmodel: Unable to open new model file: /J1421-0643_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1421-0643_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9148 x 2.049 at 0.2324 degrees (North through East)
! Clean map  min=-0.0013096  max=0.087765 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1421-0643_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0877654 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000334863 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.14463 1.14463 2.28926 4.57852 9.15703 18.3141 36.6281 73.2563
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.087 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  262.093 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1421-0643_X_dfm.log closed on Thu May 19 23:24:11 2016