! Started logfile: /scr/pima/bg219i_uvs/J1357-1527_S_dfm.log on Thu May 19 23:23:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1357-1527_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1357-1527_S_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1357-1527
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1008 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1357-1527_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.058300Jy  sigma=16.016091
! Fit after  self-cal, rms=0.576428Jy  sigma=8.855623
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=9.862 mas, bpa=4.75 degrees
! Estimated noise=2.01223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325472 Jy
! Component: 100  -  total flux cleaned = 0.39997 Jy
! Total flux subtracted in 100 components = 0.39997 Jy
! Clean residual min=-0.015719 max=0.028666 Jy/beam
! Clean residual mean=-0.000090 rms=0.005176 Jy/beam
! Combined flux in latest and established models = 0.39997 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.39997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092816Jy  sigma=1.338198
! Fit after  self-cal, rms=0.092746Jy  sigma=1.337473
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.266 mas, bmaj=11.03 mas, bpa=2.688 degrees
! Estimated noise=1.62212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0395314 Jy
! Component: 100  -  total flux cleaned = 0.0580989 Jy
! Component: 150  -  total flux cleaned = 0.0683653 Jy
! Component: 200  -  total flux cleaned = 0.0746332 Jy
! Total flux subtracted in 200 components = 0.0746332 Jy
! Clean residual min=-0.008154 max=0.008303 Jy/beam
! Clean residual mean=-0.000043 rms=0.002336 Jy/beam
! Combined flux in latest and established models = 0.474603 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 43 components and 0.474603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074986Jy  sigma=1.074618
! Fit after  self-cal, rms=0.074592Jy  sigma=1.070379
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.266 x 11.03 at 2.688 degrees (North through East)
! Clean map  min=-0.0069037  max=0.42388 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        0.99     
!   LA        1.01     NL        1.02     OV        1.02     PT        1.07     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.94     NL        1.01     OV        0.99     PT        1.06     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        0.99     
!   LA        0.99     NL        0.97     OV        1.00     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.95     
!   LA        0.94     NL        0.97     OV        0.84     PT        1.07     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.074592Jy  sigma=1.070379
! Fit after  self-cal, rms=0.068765Jy  sigma=1.015021
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.276 mas, bmaj=11.06 mas, bpa=2.653 degrees
! Estimated noise=1.61001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200864 Jy
! Component: 100  -  total flux cleaned = 0.00179759 Jy
! Component: 150  -  total flux cleaned = 0.00162982 Jy
! Component: 200  -  total flux cleaned = 0.00158488 Jy
! Total flux subtracted in 200 components = 0.00158488 Jy
! Clean residual min=-0.005534 max=0.006508 Jy/beam
! Clean residual mean=0.000027 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.476188 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.476188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068600Jy  sigma=1.012714
! Fit after  self-cal, rms=0.068571Jy  sigma=1.012423
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068571Jy  sigma=1.012423
! Fit after  self-cal, rms=0.068462Jy  sigma=1.012171
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.274 mas, bmaj=11.05 mas, bpa=2.618 degrees
! Estimated noise=1.60713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000867134 Jy
! Component: 100  -  total flux cleaned = 0.000874471 Jy
! Component: 150  -  total flux cleaned = 0.000837012 Jy
! Component: 200  -  total flux cleaned = 0.000802394 Jy
! Total flux subtracted in 200 components = 0.000802394 Jy
! Clean residual min=-0.005795 max=0.006511 Jy/beam
! Clean residual mean=0.000028 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.476991 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.476991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068399Jy  sigma=1.011428
! Fit after  self-cal, rms=0.068391Jy  sigma=1.011373
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19, -105).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00365343 Jy
! Component: 100  -  total flux cleaned = 0.0040245 Jy
! Component: 150  -  total flux cleaned = 0.00440804 Jy
! Component: 200  -  total flux cleaned = 0.00440522 Jy
! Total flux subtracted in 200 components = 0.00440522 Jy
! Clean residual min=-0.004690 max=0.005206 Jy/beam
! Clean residual mean=0.000027 rms=0.001281 Jy/beam
! Combined flux in latest and established models = 0.481396 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.481396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067829Jy  sigma=1.004022
! Fit after  self-cal, rms=0.067809Jy  sigma=1.003778
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067809Jy  sigma=1.003778
! Fit after  self-cal, rms=0.067547Jy  sigma=1.003077
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.276 mas, bmaj=11.05 mas, bpa=2.56 degrees
! Estimated noise=1.60085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121427 Jy
! Component: 100  -  total flux cleaned = -3.71361e-05 Jy
! Component: 150  -  total flux cleaned = -3.20631e-05 Jy
! Component: 200  -  total flux cleaned = 0.000164378 Jy
! Total flux subtracted in 200 components = 0.000164378 Jy
! Clean residual min=-0.004972 max=0.004978 Jy/beam
! Clean residual mean=0.000027 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.48156 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 89 components and 0.48156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067372Jy  sigma=1.001079
! Fit after  self-cal, rms=0.067368Jy  sigma=1.001011
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000223514 Jy
! Component: 100  -  total flux cleaned = -4.89175e-05 Jy
! Component: 150  -  total flux cleaned = 5.91204e-05 Jy
! Component: 200  -  total flux cleaned = 0.000161052 Jy
! Total flux subtracted in 200 components = 0.000161052 Jy
! Clean residual min=-0.005004 max=0.004777 Jy/beam
! Clean residual mean=0.000027 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.481721 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.481721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067278Jy  sigma=0.999918
! Fit after  self-cal, rms=0.067279Jy  sigma=0.999896
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067279Jy  sigma=0.999896
! Fit after  self-cal, rms=0.067229Jy  sigma=0.999654
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.801 mas, bmaj=14.69 mas, bpa=-9.579 degrees
! Estimated noise=1.92656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000617513 Jy
! Component: 100  -  total flux cleaned = 0.000929562 Jy
! Component: 150  -  total flux cleaned = 0.00103973 Jy
! Component: 200  -  total flux cleaned = 0.00109088 Jy
! Total flux subtracted in 200 components = 0.00109088 Jy
! Clean residual min=-0.004948 max=0.004517 Jy/beam
! Clean residual mean=0.000050 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.482812 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 118 components and 0.482812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067175Jy  sigma=0.998866
! Fit after  self-cal, rms=0.067167Jy  sigma=0.998785
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000447761 Jy
! Component: 100  -  total flux cleaned = -0.000404444 Jy
! Component: 150  -  total flux cleaned = -0.000438605 Jy
! Component: 200  -  total flux cleaned = -0.000505419 Jy
! Total flux subtracted in 200 components = -0.000505419 Jy
! Clean residual min=-0.004911 max=0.004283 Jy/beam
! Clean residual mean=0.000048 rms=0.001234 Jy/beam
! Combined flux in latest and established models = 0.482307 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 128 components and 0.482307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067138Jy  sigma=0.998519
! Fit after  self-cal, rms=0.067133Jy  sigma=0.998482
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=11.05 mas, bpa=2.501 degrees
! Estimated noise=1.5989 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.277 x 11.05 at 2.501 degrees (North through East)
! Clean map  min=-0.0069988  max=0.42056 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=9.867 mas, bpa=4.608 degrees
! Estimated noise=1.98008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.320121 Jy
! Component: 100  -  total flux cleaned = 0.394648 Jy
! Component: 150  -  total flux cleaned = 0.426804 Jy
! Component: 200  -  total flux cleaned = 0.44418 Jy
! Total flux subtracted in 200 components = 0.44418 Jy
! Clean residual min=-0.008539 max=0.009803 Jy/beam
! Clean residual mean=-0.000017 rms=0.002369 Jy/beam
! Combined flux in latest and established models = 0.444179 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.444179 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=11.05 mas, bpa=2.501 degrees
! Estimated noise=1.5989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137272 Jy
! Component: 100  -  total flux cleaned = 0.0217643 Jy
! Component: 150  -  total flux cleaned = 0.0264438 Jy
! Component: 200  -  total flux cleaned = 0.0291624 Jy
! Total flux subtracted in 200 components = 0.0291624 Jy
! Clean residual min=-0.005251 max=0.005058 Jy/beam
! Clean residual mean=0.000020 rms=0.001433 Jy/beam
! Combined flux in latest and established models = 0.473342 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 70 components and 0.473342 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.801 mas, bmaj=14.69 mas, bpa=-9.579 degrees
! Estimated noise=1.92656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039953 Jy
! Component: 100  -  total flux cleaned = 0.0051572 Jy
! Component: 150  -  total flux cleaned = 0.00614348 Jy
! Component: 200  -  total flux cleaned = 0.00679046 Jy
! Total flux subtracted in 200 components = 0.00679046 Jy
! Clean residual min=-0.005347 max=0.004750 Jy/beam
! Clean residual mean=0.000047 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.480132 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000578094 Jy
! Component: 100  -  total flux cleaned = 0.00109365 Jy
! Component: 150  -  total flux cleaned = 0.00132668 Jy
! Component: 200  -  total flux cleaned = 0.00154161 Jy
! Total flux subtracted in 200 components = 0.00154161 Jy
! Clean residual min=-0.005152 max=0.004403 Jy/beam
! Clean residual mean=0.000048 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.481674 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 133 components and 0.481674 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.277 mas, bmaj=11.05 mas, bpa=2.501 degrees
! Estimated noise=1.5989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004524 Jy
! Component: 100  -  total flux cleaned = 0.000612501 Jy
! Component: 150  -  total flux cleaned = 0.000611615 Jy
! Component: 200  -  total flux cleaned = 0.000613137 Jy
! Total flux subtracted in 200 components = 0.000613137 Jy
! Clean residual min=-0.004680 max=0.004174 Jy/beam
! Clean residual mean=0.000023 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 0.482287 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.482287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067173Jy  sigma=0.998687
! Fit after  self-cal, rms=0.067170Jy  sigma=0.998528
wmodel /J1357-1527_S_map.mod
! wmodel: Unable to open new model file: /J1357-1527_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1357-1527_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.277 x 11.05 at 2.501 degrees (North through East)
! Clean map  min=-0.0049748  max=0.41946 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1357-1527_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.419462 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00112864 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.807207 0.807207 1.61441 3.22883 6.45766 12.9153 25.8306 51.6613
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.419 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  371.651 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1357-1527_S_dfm.log closed on Thu May 19 23:23:38 2016