! Started logfile: /scr/pima/bg219i_uvs/J1350+6132_X_dfm.log on Thu May 19 23:23:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1350+6132_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1350+6132_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.760215 visibilities/baseline/integration-bin.
! Found source: J1350+6132
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25452 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1350+6132_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002947Jy  sigma=23.645538
! Fit after  self-cal, rms=0.951493Jy  sigma=22.435477
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7896 mas, bmaj=0.8796 mas, bpa=88.02 degrees
! Estimated noise=0.48461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0361366 Jy
! Component: 100  -  total flux cleaned = 0.0449031 Jy
! Total flux subtracted in 100 components = 0.0449031 Jy
! Clean residual min=-0.003994 max=0.008468 Jy/beam
! Clean residual mean=0.000006 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.0449031 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0449031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065968Jy  sigma=1.433503
! Fit after  self-cal, rms=0.064389Jy  sigma=1.397287
! Inverting map 
! Added new window around map position (-1, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00801289 Jy
! Component: 100  -  total flux cleaned = 0.0127735 Jy
! Total flux subtracted in 100 components = 0.0127735 Jy
! Clean residual min=-0.003504 max=0.006866 Jy/beam
! Clean residual mean=0.000003 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.0576766 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.0576766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063095Jy  sigma=1.362609
! Fit after  self-cal, rms=0.062815Jy  sigma=1.355085
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0057809 Jy
! Component: 100  -  total flux cleaned = 0.00891923 Jy
! Total flux subtracted in 100 components = 0.00891923 Jy
! Clean residual min=-0.003462 max=0.005930 Jy/beam
! Clean residual mean=0.000001 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.0665958 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.0665958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062239Jy  sigma=1.339560
! Fit after  self-cal, rms=0.062107Jy  sigma=1.335666
! Inverting map 
! Added new window around map position (1.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561478 Jy
! Component: 100  -  total flux cleaned = 0.00878953 Jy
! Total flux subtracted in 100 components = 0.00878953 Jy
! Clean residual min=-0.003275 max=0.003394 Jy/beam
! Clean residual mean=-0.000001 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.0753854 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 24 components and 0.0753854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061722Jy  sigma=1.324052
! Fit after  self-cal, rms=0.061669Jy  sigma=1.322849
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.093 mas, bmaj=1.224 mas, bpa=80.79 degrees
! Estimated noise=0.207135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296407 Jy
! Component: 100  -  total flux cleaned = 0.00360153 Jy
! Component: 150  -  total flux cleaned = 0.00423294 Jy
! Component: 200  -  total flux cleaned = 0.00465739 Jy
! Total flux subtracted in 200 components = 0.00465739 Jy
! Clean residual min=-0.001591 max=0.001849 Jy/beam
! Clean residual mean=-0.000003 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.0800428 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 37 components and 0.0800428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061508Jy  sigma=1.318154
! Fit after  self-cal, rms=0.061484Jy  sigma=1.317158
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.093 x 1.224 at 80.79 degrees (North through East)
! Clean map  min=-0.0015016  max=0.04471 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.11     KP        0.97     
!   LA        1.03     MK        1.07     NL        1.07     OV        0.94     
!   PT        1.00     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.09     NL        0.96     OV        0.96     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        0.89     KP        1.02     
!   LA        0.94     MK        1.09     NL        1.05     OV        1.03     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.90     KP        1.05     
!   LA        0.96     MK        1.13     NL        1.03     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.96     KP        1.11     
!   LA        1.00     MK        1.05     NL        0.99     OV        0.94     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.95     KP        1.07     
!   LA        0.98     MK        1.13     NL        0.99     OV        1.00     
!   PT        1.03     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.97     KP        1.02     
!   LA        1.00     MK        1.07     NL        0.97     OV        0.96     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.84     KP        1.03     
!   LA        0.95     MK        1.00     NL        1.02     OV        0.95     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.02     HN        0.91     KP        1.05     
!   LA        0.97     MK        1.00     NL        1.11     OV        0.91     
!   PT        1.09     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.061484Jy  sigma=1.317158
! Fit after  self-cal, rms=0.061907Jy  sigma=1.314786
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.1 mas, bmaj=1.236 mas, bpa=78.73 degrees
! Estimated noise=0.20833 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846451 Jy
! Component: 100  -  total flux cleaned = 0.0010749 Jy
! Component: 150  -  total flux cleaned = 0.00119211 Jy
! Component: 200  -  total flux cleaned = 0.00125957 Jy
! Total flux subtracted in 200 components = 0.00125957 Jy
! Clean residual min=-0.001490 max=0.001562 Jy/beam
! Clean residual mean=-0.000004 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.0813023 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.0813023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061852Jy  sigma=1.313328
! Fit after  self-cal, rms=0.061882Jy  sigma=1.312707
! Inverting map 
! Added new window around map position (8.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118272 Jy
! Component: 100  -  total flux cleaned = 0.00130684 Jy
! Component: 150  -  total flux cleaned = 0.00134525 Jy
! Component: 200  -  total flux cleaned = 0.00131298 Jy
! Total flux subtracted in 200 components = 0.00131298 Jy
! Clean residual min=-0.001411 max=0.001435 Jy/beam
! Clean residual mean=-0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0826153 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.0826153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061818Jy  sigma=1.311420
! Fit after  self-cal, rms=0.061814Jy  sigma=1.311142
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061814Jy  sigma=1.311142
! Fit after  self-cal, rms=0.062000Jy  sigma=1.308747
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.1 mas, bmaj=1.235 mas, bpa=80.39 degrees
! Estimated noise=0.208311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000692302 Jy
! Component: 100  -  total flux cleaned = 0.000763374 Jy
! Component: 150  -  total flux cleaned = 0.000827873 Jy
! Component: 200  -  total flux cleaned = 0.000802509 Jy
! Total flux subtracted in 200 components = 0.000802509 Jy
! Clean residual min=-0.001519 max=0.001318 Jy/beam
! Clean residual mean=-0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.0834178 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 54 components and 0.0834178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061963Jy  sigma=1.307898
! Fit after  self-cal, rms=0.061993Jy  sigma=1.307425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151344 Jy
! Component: 100  -  total flux cleaned = 0.000215399 Jy
! Component: 150  -  total flux cleaned = 0.000159812 Jy
! Component: 200  -  total flux cleaned = 3.22673e-05 Jy
! Total flux subtracted in 200 components = 3.22673e-05 Jy
! Clean residual min=-0.001491 max=0.001336 Jy/beam
! Clean residual mean=-0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0834501 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.0834501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061965Jy  sigma=1.306799
! Fit after  self-cal, rms=0.061950Jy  sigma=1.306527
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061950Jy  sigma=1.306527
! Fit after  self-cal, rms=0.061940Jy  sigma=1.306462
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.098 mas, bmaj=1.234 mas, bpa=79.8 degrees
! Estimated noise=0.208029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000209968 Jy
! Component: 100  -  total flux cleaned = 0.000209846 Jy
! Component: 150  -  total flux cleaned = 0.000184402 Jy
! Component: 200  -  total flux cleaned = 0.000113545 Jy
! Total flux subtracted in 200 components = 0.000113545 Jy
! Clean residual min=-0.001462 max=0.001298 Jy/beam
! Clean residual mean=-0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0835636 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.0835636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061915Jy  sigma=1.305918
! Fit after  self-cal, rms=0.061911Jy  sigma=1.305637
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.73584e-05 Jy
! Component: 100  -  total flux cleaned = 2.41124e-06 Jy
! Component: 150  -  total flux cleaned = -4.37708e-05 Jy
! Component: 200  -  total flux cleaned = -0.000108884 Jy
! Total flux subtracted in 200 components = -0.000108884 Jy
! Clean residual min=-0.001453 max=0.001289 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0834547 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 64 components and 0.0834547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061891Jy  sigma=1.305218
! Fit after  self-cal, rms=0.061888Jy  sigma=1.305116
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061888Jy  sigma=1.305116
! Fit after  self-cal, rms=0.061822Jy  sigma=1.305097
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.451 mas, bmaj=2.711 mas, bpa=-82.9 degrees
! Estimated noise=0.260983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.2584e-05 Jy
! Component: 100  -  total flux cleaned = -7.26786e-05 Jy
! Component: 150  -  total flux cleaned = -5.97512e-05 Jy
! Component: 200  -  total flux cleaned = -4.81296e-05 Jy
! Total flux subtracted in 200 components = -4.81296e-05 Jy
! Clean residual min=-0.001789 max=0.001237 Jy/beam
! Clean residual mean=-0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0834066 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 74 components and 0.0834066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061817Jy  sigma=1.304980
! Fit after  self-cal, rms=0.061815Jy  sigma=1.304956
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.5922e-05 Jy
! Component: 100  -  total flux cleaned = -2.55391e-05 Jy
! Component: 150  -  total flux cleaned = -3.64185e-05 Jy
! Component: 200  -  total flux cleaned = -4.6145e-05 Jy
! Total flux subtracted in 200 components = -4.6145e-05 Jy
! Clean residual min=-0.001796 max=0.001235 Jy/beam
! Clean residual mean=-0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.0833604 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 76 components and 0.0833604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061811Jy  sigma=1.304865
! Fit after  self-cal, rms=0.061811Jy  sigma=1.304851
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.234 mas, bpa=79.12 degrees
! Estimated noise=0.207789 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.096 x 1.234 at 79.12 degrees (North through East)
! Clean map  min=-0.001375  max=0.041386 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.79 mas, bmaj=0.8845 mas, bpa=83.06 degrees
! Estimated noise=0.486793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0374797 Jy
! Component: 100  -  total flux cleaned = 0.0533344 Jy
! Component: 150  -  total flux cleaned = 0.0626754 Jy
! Component: 200  -  total flux cleaned = 0.0687798 Jy
! Total flux subtracted in 200 components = 0.0687798 Jy
! Clean residual min=-0.003786 max=0.003938 Jy/beam
! Clean residual mean=0.000005 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.0687798 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0687798 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.234 mas, bpa=79.12 degrees
! Estimated noise=0.207789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00559626 Jy
! Component: 100  -  total flux cleaned = 0.00872864 Jy
! Component: 150  -  total flux cleaned = 0.0109254 Jy
! Component: 200  -  total flux cleaned = 0.0125005 Jy
! Total flux subtracted in 200 components = 0.0125005 Jy
! Clean residual min=-0.001494 max=0.001243 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0812804 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.0812803 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.451 mas, bmaj=2.711 mas, bpa=-82.9 degrees
! Estimated noise=0.260983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013657 Jy
! Component: 100  -  total flux cleaned = 0.00174118 Jy
! Component: 150  -  total flux cleaned = 0.00193418 Jy
! Component: 200  -  total flux cleaned = 0.00211984 Jy
! Total flux subtracted in 200 components = 0.00211984 Jy
! Clean residual min=-0.001712 max=0.001270 Jy/beam
! Clean residual mean=-0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0834002 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139329 Jy
! Component: 100  -  total flux cleaned = 0.000157279 Jy
! Component: 150  -  total flux cleaned = 0.000157769 Jy
! Component: 200  -  total flux cleaned = 0.000128963 Jy
! Total flux subtracted in 200 components = 0.000128963 Jy
! Clean residual min=-0.001720 max=0.001265 Jy/beam
! Clean residual mean=-0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0835291 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 63 components and 0.0835291 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=1.234 mas, bpa=79.12 degrees
! Estimated noise=0.207789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028761 Jy
! Component: 100  -  total flux cleaned = 0.000221887 Jy
! Component: 150  -  total flux cleaned = 0.00016584 Jy
! Component: 200  -  total flux cleaned = 0.000117602 Jy
! Total flux subtracted in 200 components = 0.000117602 Jy
! Clean residual min=-0.001385 max=0.001253 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0836467 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.0836467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061809Jy  sigma=1.304693
! Fit after  self-cal, rms=0.061796Jy  sigma=1.303964
wmodel /J1350+6132_X_map.mod
! wmodel: Unable to open new model file: /J1350+6132_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1350+6132_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.096 x 1.234 at 79.12 degrees (North through East)
! Clean map  min=-0.0013739  max=0.03987 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1350+6132_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0398698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000300495 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.26108 2.26108 4.52215 9.0443 18.0886 36.1772 72.3544
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.039 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  132.68 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1350+6132_X_dfm.log closed on Thu May 19 23:23:34 2016