! Started logfile: /scr/pima/bg219i_uvs/J1350+6132_S_dfm.log on Thu May 19 23:23:27 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219i_uvs/J1350+6132_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J1350+6132_S_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1350+6132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 11160 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1350+6132_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005802Jy sigma=24.248723 ! Fit after self-cal, rms=0.880166Jy sigma=21.225309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=3.619 mas, bpa=-74.28 degrees ! Estimated noise=0.479851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882541 Jy ! Component: 100 - total flux cleaned = 0.112424 Jy ! Total flux subtracted in 100 components = 0.112424 Jy ! Clean residual min=-0.005221 max=0.010084 Jy/beam ! Clean residual mean=0.000007 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.112424 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.112424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061839Jy sigma=1.441048 ! Fit after self-cal, rms=0.061813Jy sigma=1.440619 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115267 Jy ! Component: 100 - total flux cleaned = 0.0184173 Jy ! Total flux subtracted in 100 components = 0.0184173 Jy ! Clean residual min=-0.003868 max=0.005710 Jy/beam ! Clean residual mean=0.000007 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.130841 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.130841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058824Jy sigma=1.368671 ! Fit after self-cal, rms=0.058800Jy sigma=1.368359 ! Inverting map ! Added new window around map position (5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055575 Jy ! Component: 100 - total flux cleaned = 0.00897241 Jy ! Total flux subtracted in 100 components = 0.00897241 Jy ! Clean residual min=-0.003194 max=0.003172 Jy/beam ! Clean residual mean=0.000008 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.139814 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.139814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058191Jy sigma=1.353390 ! Fit after self-cal, rms=0.058159Jy sigma=1.352687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=4.523 mas, bpa=-79.93 degrees ! Estimated noise=0.296787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325203 Jy ! Component: 100 - total flux cleaned = 0.00521036 Jy ! Component: 150 - total flux cleaned = 0.00653849 Jy ! Component: 200 - total flux cleaned = 0.00749485 Jy ! Total flux subtracted in 200 components = 0.00749485 Jy ! Clean residual min=-0.002171 max=0.002401 Jy/beam ! Clean residual mean=0.000021 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.147309 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 65 components and 0.147309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057960Jy sigma=1.347780 ! Fit after self-cal, rms=0.057946Jy sigma=1.347505 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.918 x 4.523 at -79.93 degrees (North through East) ! Clean map min=-0.0020568 max=0.11806 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.03 KP 0.97 ! LA 0.98 MK 1.00 NL 0.92 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.02 KP 0.97 ! LA 0.97 MK 1.00 NL 0.96 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.06 KP 0.98 ! LA 0.97 MK 1.01 NL 0.94 OV 0.98 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.02 KP 1.02 ! LA 1.01 MK 1.02 NL 1.00 OV 0.97 ! PT 1.04 SC 1.01 ! ! ! Fit before self-cal, rms=0.057946Jy sigma=1.347505 ! Fit after self-cal, rms=0.057875Jy sigma=1.341945 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=4.546 mas, bpa=-79.91 degrees ! Estimated noise=0.296556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847596 Jy ! Component: 100 - total flux cleaned = 0.000871624 Jy ! Component: 150 - total flux cleaned = 0.00087053 Jy ! Component: 200 - total flux cleaned = 0.000854485 Jy ! Total flux subtracted in 200 components = 0.000854485 Jy ! Clean residual min=-0.001914 max=0.002010 Jy/beam ! Clean residual mean=0.000018 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.148163 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.148163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057853Jy sigma=1.341404 ! Fit after self-cal, rms=0.057855Jy sigma=1.341306 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057855Jy sigma=1.341306 ! Fit after self-cal, rms=0.057846Jy sigma=1.337531 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=4.532 mas, bpa=-81.08 degrees ! Estimated noise=0.296127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.73146e-05 Jy ! Component: 100 - total flux cleaned = -7.40098e-05 Jy ! Component: 150 - total flux cleaned = -4.57445e-05 Jy ! Component: 200 - total flux cleaned = -3.31319e-05 Jy ! Total flux subtracted in 200 components = -3.31319e-05 Jy ! Clean residual min=-0.001595 max=0.001570 Jy/beam ! Clean residual mean=0.000012 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.14813 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.14813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057837Jy sigma=1.337304 ! Fit after self-cal, rms=0.057847Jy sigma=1.337247 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.26723e-05 Jy ! Component: 100 - total flux cleaned = 6.24668e-05 Jy ! Component: 150 - total flux cleaned = 5.19029e-05 Jy ! Component: 200 - total flux cleaned = 5.20999e-05 Jy ! Total flux subtracted in 200 components = 5.20999e-05 Jy ! Clean residual min=-0.001606 max=0.001558 Jy/beam ! Clean residual mean=0.000012 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.148182 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.148182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057843Jy sigma=1.337161 ! Fit after self-cal, rms=0.057842Jy sigma=1.337153 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057842Jy sigma=1.337153 ! Fit after self-cal, rms=0.057860Jy sigma=1.337098 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.948 mas, bmaj=4.53 mas, bpa=-82.06 degrees ! Estimated noise=0.296086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.50813e-05 Jy ! Component: 100 - total flux cleaned = -5.58147e-05 Jy ! Component: 150 - total flux cleaned = -4.55931e-05 Jy ! Component: 200 - total flux cleaned = -1.90385e-05 Jy ! Total flux subtracted in 200 components = -1.90385e-05 Jy ! Clean residual min=-0.001596 max=0.001534 Jy/beam ! Clean residual mean=0.000012 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.148163 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.148163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057856Jy sigma=1.336981 ! Fit after self-cal, rms=0.057856Jy sigma=1.336973 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.56075e-05 Jy ! Component: 100 - total flux cleaned = 5.40673e-05 Jy ! Component: 150 - total flux cleaned = 5.43267e-05 Jy ! Component: 200 - total flux cleaned = 6.18124e-05 Jy ! Total flux subtracted in 200 components = 6.18124e-05 Jy ! Clean residual min=-0.001604 max=0.001533 Jy/beam ! Clean residual mean=0.000012 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.148225 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.148225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057854Jy sigma=1.336924 ! Fit after self-cal, rms=0.057854Jy sigma=1.336921 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057854Jy sigma=1.336921 ! Fit after self-cal, rms=0.057872Jy sigma=1.336887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.792 mas, bmaj=8.914 mas, bpa=75.22 degrees ! Estimated noise=0.379774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702717 Jy ! Component: 100 - total flux cleaned = 0.000769152 Jy ! Component: 150 - total flux cleaned = 0.000790067 Jy ! Component: 200 - total flux cleaned = 0.000809214 Jy ! Total flux subtracted in 200 components = 0.000809214 Jy ! Clean residual min=-0.001653 max=0.001909 Jy/beam ! Clean residual mean=0.000030 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.149034 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 94 components and 0.149034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057876Jy sigma=1.336970 ! Fit after self-cal, rms=0.057875Jy sigma=1.336960 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114516 Jy ! Component: 100 - total flux cleaned = 0.000131532 Jy ! Component: 150 - total flux cleaned = 0.000154714 Jy ! Component: 200 - total flux cleaned = 0.000176588 Jy ! Total flux subtracted in 200 components = 0.000176588 Jy ! Clean residual min=-0.001629 max=0.001910 Jy/beam ! Clean residual mean=0.000030 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.149211 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 95 components and 0.149211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057879Jy sigma=1.337036 ! Fit after self-cal, rms=0.057879Jy sigma=1.337032 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=4.529 mas, bpa=-82.9 degrees ! Estimated noise=0.296103 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.953 x 4.529 at -82.9 degrees (North through East) ! Clean map min=-0.0015473 max=0.1177 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=3.616 mas, bpa=-76.86 degrees ! Estimated noise=0.481665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0884293 Jy ! Component: 100 - total flux cleaned = 0.112869 Jy ! Component: 150 - total flux cleaned = 0.124452 Jy ! Component: 200 - total flux cleaned = 0.131678 Jy ! Total flux subtracted in 200 components = 0.131678 Jy ! Clean residual min=-0.003586 max=0.003883 Jy/beam ! Clean residual mean=0.000004 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.131678 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.131678 Jy ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=4.529 mas, bpa=-82.9 degrees ! Estimated noise=0.296103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626785 Jy ! Component: 100 - total flux cleaned = 0.00988053 Jy ! Component: 150 - total flux cleaned = 0.0121256 Jy ! Component: 200 - total flux cleaned = 0.0135798 Jy ! Total flux subtracted in 200 components = 0.0135798 Jy ! Clean residual min=-0.001621 max=0.001790 Jy/beam ! Clean residual mean=0.000010 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.145258 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 50 components and 0.145258 Jy ! Inverting map ! Added new window around map position (13, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180301 Jy ! Component: 100 - total flux cleaned = 0.00288305 Jy ! Component: 150 - total flux cleaned = 0.00366287 Jy ! Component: 200 - total flux cleaned = 0.0040086 Jy ! Total flux subtracted in 200 components = 0.0040086 Jy ! Clean residual min=-0.001563 max=0.001493 Jy/beam ! Clean residual mean=0.000013 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.149266 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 76 components and 0.149266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.792 mas, bmaj=8.914 mas, bpa=75.22 degrees ! Estimated noise=0.379774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702441 Jy ! Component: 100 - total flux cleaned = 0.000932994 Jy ! Component: 150 - total flux cleaned = 0.00111818 Jy ! Component: 200 - total flux cleaned = 0.00126747 Jy ! Total flux subtracted in 200 components = 0.00126747 Jy ! Clean residual min=-0.001524 max=0.001936 Jy/beam ! Clean residual mean=0.000033 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.150534 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110869 Jy ! Component: 100 - total flux cleaned = 0.000210692 Jy ! Component: 150 - total flux cleaned = 0.000285203 Jy ! Component: 200 - total flux cleaned = 0.000346971 Jy ! Total flux subtracted in 200 components = 0.000346971 Jy ! Clean residual min=-0.001513 max=0.001934 Jy/beam ! Clean residual mean=0.000033 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.150881 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 103 components and 0.150881 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=4.529 mas, bpa=-82.9 degrees ! Estimated noise=0.296103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.8851e-05 Jy ! Component: 100 - total flux cleaned = -5.67204e-05 Jy ! Component: 150 - total flux cleaned = -5.67355e-05 Jy ! Component: 200 - total flux cleaned = -6.96277e-05 Jy ! Total flux subtracted in 200 components = -6.96277e-05 Jy ! Clean residual min=-0.001608 max=0.001518 Jy/beam ! Clean residual mean=0.000014 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.150811 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.150811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057829Jy sigma=1.335789 ! Fit after self-cal, rms=0.057828Jy sigma=1.335698 wmodel /J1350+6132_S_map.mod ! wmodel: Unable to open new model file: /J1350+6132_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219i_uvs/J1350+6132_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.953 x 4.529 at -82.9 degrees (North through East) ! Clean map min=-0.0015271 max=0.11804 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1350+6132_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.118045 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361138 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.917799 0.917799 1.8356 3.6712 7.34239 14.6848 29.3696 58.7391 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.118 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 326.868 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J1350+6132_S_dfm.log closed on Thu May 19 23:23:30 2016