! Started logfile: /scr/pima/bg219i_uvs/J1345-3015_S_dfm.log on Thu May 19 23:23:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1345-3015_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1345-3015_S_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1345-3015
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8424 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1345-3015_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.137853Jy  sigma=19.253485
! Fit after  self-cal, rms=0.602174Jy  sigma=10.936997
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.355 mas, bmaj=6.694 mas, bpa=-12.05 degrees
! Estimated noise=0.698149 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.287595 Jy
! Component: 100  -  total flux cleaned = 0.427097 Jy
! Total flux subtracted in 100 components = 0.427097 Jy
! Clean residual min=-0.029208 max=0.085810 Jy/beam
! Clean residual mean=0.000103 rms=0.010637 Jy/beam
! Combined flux in latest and established models = 0.427097 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.427097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.280381Jy  sigma=4.278732
! Fit after  self-cal, rms=0.280052Jy  sigma=4.274352
! Inverting map 
! Added new window around map position (-3.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0980863 Jy
! Component: 100  -  total flux cleaned = 0.166704 Jy
! Total flux subtracted in 100 components = 0.166704 Jy
! Clean residual min=-0.020009 max=0.044200 Jy/beam
! Clean residual mean=0.000067 rms=0.006652 Jy/beam
! Combined flux in latest and established models = 0.5938 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 65 components and 0.5938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193925Jy  sigma=2.925815
! Fit after  self-cal, rms=0.193081Jy  sigma=2.913073
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0523204 Jy
! Component: 100  -  total flux cleaned = 0.0908945 Jy
! Total flux subtracted in 100 components = 0.0908945 Jy
! Clean residual min=-0.015503 max=0.030276 Jy/beam
! Clean residual mean=0.000043 rms=0.004885 Jy/beam
! Combined flux in latest and established models = 0.684695 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 89 components and 0.684695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155928Jy  sigma=2.356425
! Fit after  self-cal, rms=0.155306Jy  sigma=2.347831
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=7.692 mas, bpa=-12.13 degrees
! Estimated noise=0.476048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0579192 Jy
! Component: 100  -  total flux cleaned = 0.0930863 Jy
! Component: 150  -  total flux cleaned = 0.115034 Jy
! Component: 200  -  total flux cleaned = 0.128784 Jy
! Total flux subtracted in 200 components = 0.128784 Jy
! Clean residual min=-0.016067 max=0.043175 Jy/beam
! Clean residual mean=-0.000040 rms=0.007189 Jy/beam
! Combined flux in latest and established models = 0.813479 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 111 components and 0.813479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124324Jy  sigma=1.948192
! Fit after  self-cal, rms=0.123209Jy  sigma=1.931859
! Inverting map 
! Added new window around map position (-32.5, 56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.043967 Jy
! Component: 100  -  total flux cleaned = 0.0689459 Jy
! Component: 150  -  total flux cleaned = 0.0866958 Jy
! Component: 200  -  total flux cleaned = 0.100324 Jy
! Total flux subtracted in 200 components = 0.100324 Jy
! Clean residual min=-0.012555 max=0.024776 Jy/beam
! Clean residual mean=-0.000028 rms=0.004828 Jy/beam
! Combined flux in latest and established models = 0.913803 Jy
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 200 components and 0.913803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101509Jy  sigma=1.638236
! Fit after  self-cal, rms=0.099129Jy  sigma=1.598893
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.921 x 7.692 at -12.13 degrees (North through East)
! Clean map  min=-0.012371  max=0.37871 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.13     KP        0.92     
!   LA        0.94     MK        1.00     NL        1.04     OV        1.04     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        1.15     KP        0.93     
!   LA        0.92     MK        1.00     NL        1.02     OV        1.03     
!   PT        0.93     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.13     KP        0.95     
!   LA        0.94     MK        0.97     NL        1.00     OV        1.02     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.06     HN        1.13     KP        0.97     
!   LA        0.96     MK        0.98     NL        1.08     OV        1.04     
!   PT        0.96     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.099129Jy  sigma=1.598893
! Fit after  self-cal, rms=0.090179Jy  sigma=1.468446
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.709 mas, bpa=-12.49 degrees
! Estimated noise=0.482025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11, 15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158993 Jy
! Component: 100  -  total flux cleaned = 0.0255957 Jy
! Component: 150  -  total flux cleaned = 0.0328332 Jy
! Component: 200  -  total flux cleaned = 0.0380095 Jy
! Total flux subtracted in 200 components = 0.0380095 Jy
! Clean residual min=-0.007617 max=0.014839 Jy/beam
! Clean residual mean=-0.000029 rms=0.002484 Jy/beam
! Combined flux in latest and established models = 0.951812 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 240 components and 0.951813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086612Jy  sigma=1.414708
! Fit after  self-cal, rms=0.086307Jy  sigma=1.411095
! Inverting map 
! Added new window around map position (-23, 53).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152701 Jy
! Component: 100  -  total flux cleaned = 0.0228936 Jy
! Component: 150  -  total flux cleaned = 0.0283737 Jy
! Component: 200  -  total flux cleaned = 0.0317382 Jy
! Total flux subtracted in 200 components = 0.0317382 Jy
! Clean residual min=-0.007267 max=0.009234 Jy/beam
! Clean residual mean=-0.000018 rms=0.001836 Jy/beam
! Combined flux in latest and established models = 0.983551 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 296 components and 0.983551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083321Jy  sigma=1.367004
! Fit after  self-cal, rms=0.083170Jy  sigma=1.365049
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083170Jy  sigma=1.365049
! Fit after  self-cal, rms=0.080955Jy  sigma=1.331729
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.924 mas, bmaj=7.702 mas, bpa=-12.28 degrees
! Estimated noise=0.478804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00718958 Jy
! Component: 100  -  total flux cleaned = 0.0124616 Jy
! Component: 150  -  total flux cleaned = 0.0166841 Jy
! Component: 200  -  total flux cleaned = 0.018967 Jy
! Total flux subtracted in 200 components = 0.018967 Jy
! Clean residual min=-0.005403 max=0.007211 Jy/beam
! Clean residual mean=-0.000010 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 1.00252 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 335 components and 1.00252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079988Jy  sigma=1.316742
! Fit after  self-cal, rms=0.079925Jy  sigma=1.316019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.5, -83).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00563427 Jy
! Component: 100  -  total flux cleaned = 0.00786235 Jy
! Component: 150  -  total flux cleaned = 0.00929714 Jy
! Component: 200  -  total flux cleaned = 0.0103748 Jy
! Total flux subtracted in 200 components = 0.0103748 Jy
! Clean residual min=-0.004984 max=0.004952 Jy/beam
! Clean residual mean=-0.000003 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 1.01289 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 374 components and 1.01289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079355Jy  sigma=1.306352
! Fit after  self-cal, rms=0.079345Jy  sigma=1.306187
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079345Jy  sigma=1.306187
! Fit after  self-cal, rms=0.079342Jy  sigma=1.304162
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.928 mas, bmaj=7.711 mas, bpa=-12.28 degrees
! Estimated noise=0.47894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00350865 Jy
! Component: 100  -  total flux cleaned = 0.00575636 Jy
! Component: 150  -  total flux cleaned = 0.00711438 Jy
! Component: 200  -  total flux cleaned = 0.00787962 Jy
! Total flux subtracted in 200 components = 0.00787962 Jy
! Clean residual min=-0.004358 max=0.004363 Jy/beam
! Clean residual mean=-0.000003 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 1.02077 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 398 components and 1.02077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079041Jy  sigma=1.299345
! Fit after  self-cal, rms=0.079032Jy  sigma=1.299230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100697 Jy
! Component: 100  -  total flux cleaned = 0.00168757 Jy
! Component: 150  -  total flux cleaned = 0.00232255 Jy
! Component: 200  -  total flux cleaned = 0.00292263 Jy
! Total flux subtracted in 200 components = 0.00292263 Jy
! Clean residual min=-0.004202 max=0.004224 Jy/beam
! Clean residual mean=-0.000003 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 1.02369 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 414 components and 1.02369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078878Jy  sigma=1.296816
! Fit after  self-cal, rms=0.078873Jy  sigma=1.296743
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078873Jy  sigma=1.296743
! Fit after  self-cal, rms=0.078805Jy  sigma=1.295932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.828 mas, bmaj=19.63 mas, bpa=-7.284 degrees
! Estimated noise=0.668633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00408127 Jy
! Component: 100  -  total flux cleaned = 0.00653208 Jy
! Component: 150  -  total flux cleaned = 0.00747902 Jy
! Component: 200  -  total flux cleaned = 0.00798085 Jy
! Total flux subtracted in 200 components = 0.00798085 Jy
! Clean residual min=-0.003836 max=0.004413 Jy/beam
! Clean residual mean=-0.000003 rms=0.001157 Jy/beam
! Combined flux in latest and established models = 1.03168 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 448 components and 1.03168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078699Jy  sigma=1.294396
! Fit after  self-cal, rms=0.078680Jy  sigma=1.294237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107429 Jy
! Component: 100  -  total flux cleaned = 0.00146458 Jy
! Component: 150  -  total flux cleaned = 0.00146479 Jy
! Component: 200  -  total flux cleaned = 0.00146254 Jy
! Total flux subtracted in 200 components = 0.00146254 Jy
! Clean residual min=-0.004061 max=0.004358 Jy/beam
! Clean residual mean=-0.000005 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 1.03314 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 466 components and 1.03314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078651Jy  sigma=1.293997
! Fit after  self-cal, rms=0.078647Jy  sigma=1.293971
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.715 mas, bpa=-12.33 degrees
! Estimated noise=0.478527 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.929 x 7.715 at -12.33 degrees (North through East)
! Clean map  min=-0.0034292  max=0.38 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.352 mas, bmaj=6.689 mas, bpa=-12.13 degrees
! Estimated noise=0.703837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.289394 Jy
! Component: 100  -  total flux cleaned = 0.432767 Jy
! Component: 150  -  total flux cleaned = 0.530583 Jy
! Component: 200  -  total flux cleaned = 0.59993 Jy
! Total flux subtracted in 200 components = 0.59993 Jy
! Clean residual min=-0.019378 max=0.038999 Jy/beam
! Clean residual mean=0.000051 rms=0.006217 Jy/beam
! Combined flux in latest and established models = 0.59993 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.59993 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.715 mas, bpa=-12.33 degrees
! Estimated noise=0.478527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0881576 Jy
! Component: 100  -  total flux cleaned = 0.146542 Jy
! Component: 150  -  total flux cleaned = 0.189727 Jy
! Component: 200  -  total flux cleaned = 0.222968 Jy
! Total flux subtracted in 200 components = 0.222968 Jy
! Clean residual min=-0.013072 max=0.021709 Jy/beam
! Clean residual mean=-0.000009 rms=0.005105 Jy/beam
! Combined flux in latest and established models = 0.822898 Jy
! Adding 101 model components to the UV plane model.
! The established model now contains 139 components and 0.822898 Jy
! Inverting map 
! Added new window around map position (-7, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274676 Jy
! Component: 100  -  total flux cleaned = 0.0500571 Jy
! Component: 150  -  total flux cleaned = 0.0690722 Jy
! Component: 200  -  total flux cleaned = 0.0853964 Jy
! Total flux subtracted in 200 components = 0.0853964 Jy
! Clean residual min=-0.007967 max=0.011364 Jy/beam
! Clean residual mean=-0.000011 rms=0.002964 Jy/beam
! Combined flux in latest and established models = 0.908294 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 217 components and 0.908294 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.828 mas, bmaj=19.63 mas, bpa=-7.284 degrees
! Estimated noise=0.668633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270192 Jy
! Component: 100  -  total flux cleaned = 0.046656 Jy
! Component: 150  -  total flux cleaned = 0.061398 Jy
! Component: 200  -  total flux cleaned = 0.0726509 Jy
! Total flux subtracted in 200 components = 0.0726509 Jy
! Clean residual min=-0.006032 max=0.007372 Jy/beam
! Clean residual mean=-0.000029 rms=0.002530 Jy/beam
! Combined flux in latest and established models = 0.980945 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00881093 Jy
! Component: 100  -  total flux cleaned = 0.0159892 Jy
! Component: 150  -  total flux cleaned = 0.0219007 Jy
! Component: 200  -  total flux cleaned = 0.026804 Jy
! Total flux subtracted in 200 components = 0.026804 Jy
! Clean residual min=-0.004394 max=0.005270 Jy/beam
! Clean residual mean=-0.000020 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 1.00775 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 323 components and 1.00775 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.929 mas, bmaj=7.715 mas, bpa=-12.33 degrees
! Estimated noise=0.478527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392976 Jy
! Component: 100  -  total flux cleaned = 0.0061758 Jy
! Component: 150  -  total flux cleaned = 0.00765344 Jy
! Component: 200  -  total flux cleaned = 0.00882562 Jy
! Total flux subtracted in 200 components = 0.00882562 Jy
! Clean residual min=-0.004265 max=0.005032 Jy/beam
! Clean residual mean=-0.000009 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 1.01657 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 352 components and 1.01657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079245Jy  sigma=1.304380
! Fit after  self-cal, rms=0.079118Jy  sigma=1.301680
wmodel /J1345-3015_S_map.mod
! wmodel: Unable to open new model file: /J1345-3015_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1345-3015_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.929 x 7.715 at -12.33 degrees (North through East)
! Clean map  min=-0.0039228  max=0.3897 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1345-3015_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.389695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000993347 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.764711 0.764711 1.52942 3.05884 6.11768 12.2354 24.4707 48.9415 97.8829
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.389 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  392.305 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1345-3015_S_dfm.log closed on Thu May 19 23:23:22 2016