! Started logfile: /scr/pima/bg219i_uvs/J1334-1150_S_uvs.log on Wed Apr 6 23:04:19 2016 obs /scr/pima/bg219i_uvs/J1334-1150_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J1334-1150_S_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877778 visibilities/baseline/integration-bin. ! Found source: J1334-1150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 6636 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1334-1150_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025522Jy sigma=20.620021 ! Fit after self-cal, rms=0.809058Jy sigma=16.327772 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=6.865 mas, bpa=-9.154 degrees ! Estimated noise=0.62797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139377 Jy ! Component: 100 - total flux cleaned = 0.182329 Jy ! Total flux subtracted in 100 components = 0.182329 Jy ! Clean residual min=-0.011931 max=0.022758 Jy/beam ! Clean residual mean=-0.000052 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.182329 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.182329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095067Jy sigma=1.783604 ! Fit after self-cal, rms=0.094922Jy sigma=1.781424 ! Inverting map ! Added new window around map position (-3.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267766 Jy ! Component: 100 - total flux cleaned = 0.0445637 Jy ! Total flux subtracted in 100 components = 0.0445637 Jy ! Clean residual min=-0.008615 max=0.015172 Jy/beam ! Clean residual mean=-0.000035 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.226892 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.226892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082906Jy sigma=1.525899 ! Fit after self-cal, rms=0.082869Jy sigma=1.524159 ! Inverting map ! Added new window around map position (-8, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015583 Jy ! Component: 100 - total flux cleaned = 0.0259103 Jy ! Total flux subtracted in 100 components = 0.0259103 Jy ! Clean residual min=-0.007117 max=0.009226 Jy/beam ! Clean residual mean=-0.000027 rms=0.001777 Jy/beam ! Combined flux in latest and established models = 0.252803 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 61 components and 0.252803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078640Jy sigma=1.433023 ! Fit after self-cal, rms=0.078452Jy sigma=1.428373 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=7.893 mas, bpa=-8.454 degrees ! Estimated noise=0.452573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124226 Jy ! Component: 100 - total flux cleaned = 0.0196995 Jy ! Component: 150 - total flux cleaned = 0.024394 Jy ! Component: 200 - total flux cleaned = 0.0256361 Jy ! Total flux subtracted in 200 components = 0.0256361 Jy ! Clean residual min=-0.005939 max=0.006286 Jy/beam ! Clean residual mean=-0.000030 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.278439 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 94 components and 0.278439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076443Jy sigma=1.380288 ! Fit after self-cal, rms=0.076274Jy sigma=1.375747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 7.893 at -8.454 degrees (North through East) ! Clean map min=-0.0051135 max=0.18869 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.03 KP 1.01 ! LA 1.00 MK 1.04 NL 1.03 OV 0.99 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.03 KP 0.99 ! LA 0.97 MK 1.00 NL 1.03 OV 1.00 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.01 KP 1.01 ! LA 1.03 MK 1.01 NL 0.99 OV 1.00 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.00 KP 1.00 ! LA 0.98 MK 0.98 NL 1.02 OV 0.99 ! PT 1.03 SC 0.95 ! ! ! Fit before self-cal, rms=0.076274Jy sigma=1.375747 ! Fit after self-cal, rms=0.074431Jy sigma=1.362827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=7.851 mas, bpa=-8.054 degrees ! Estimated noise=0.446376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031861 Jy ! Component: 100 - total flux cleaned = 0.00373088 Jy ! Component: 150 - total flux cleaned = 0.00395126 Jy ! Component: 200 - total flux cleaned = 0.00414739 Jy ! Total flux subtracted in 200 components = 0.00414739 Jy ! Clean residual min=-0.003844 max=0.004297 Jy/beam ! Clean residual mean=0.000001 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.282586 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.282586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073831Jy sigma=1.354141 ! Fit after self-cal, rms=0.073835Jy sigma=1.353536 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073835Jy sigma=1.353536 ! Fit after self-cal, rms=0.072922Jy sigma=1.345183 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=7.811 mas, bpa=-7.466 degrees ! Estimated noise=0.443109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103347 Jy ! Component: 100 - total flux cleaned = 0.000927504 Jy ! Component: 150 - total flux cleaned = 0.00110796 Jy ! Component: 200 - total flux cleaned = 0.001265 Jy ! Total flux subtracted in 200 components = 0.001265 Jy ! Clean residual min=-0.003686 max=0.003436 Jy/beam ! Clean residual mean=0.000004 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.283851 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 0.283851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072523Jy sigma=1.340817 ! Fit after self-cal, rms=0.072530Jy sigma=1.340177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580677 Jy ! Component: 100 - total flux cleaned = 0.000654052 Jy ! Component: 150 - total flux cleaned = 0.000864331 Jy ! Component: 200 - total flux cleaned = 0.000931469 Jy ! Total flux subtracted in 200 components = 0.000931469 Jy ! Clean residual min=-0.003571 max=0.003065 Jy/beam ! Clean residual mean=0.000005 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.284783 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 0.284783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072329Jy sigma=1.337916 ! Fit after self-cal, rms=0.072336Jy sigma=1.337718 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072336Jy sigma=1.337718 ! Fit after self-cal, rms=0.072127Jy sigma=1.336966 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=7.794 mas, bpa=-7.217 degrees ! Estimated noise=0.44161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195124 Jy ! Component: 100 - total flux cleaned = 0.000420615 Jy ! Component: 150 - total flux cleaned = 0.000677046 Jy ! Component: 200 - total flux cleaned = 0.000853507 Jy ! Total flux subtracted in 200 components = 0.000853507 Jy ! Clean residual min=-0.003488 max=0.002942 Jy/beam ! Clean residual mean=0.000004 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.285636 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 148 components and 0.285636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071937Jy sigma=1.335066 ! Fit after self-cal, rms=0.071943Jy sigma=1.334867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396752 Jy ! Component: 100 - total flux cleaned = 0.000566316 Jy ! Component: 150 - total flux cleaned = 0.000672206 Jy ! Component: 200 - total flux cleaned = 0.000722782 Jy ! Total flux subtracted in 200 components = 0.000722782 Jy ! Clean residual min=-0.003392 max=0.002890 Jy/beam ! Clean residual mean=0.000004 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.286359 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 154 components and 0.286359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071836Jy sigma=1.333707 ! Fit after self-cal, rms=0.071841Jy sigma=1.333623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071841Jy sigma=1.333623 ! Fit after self-cal, rms=0.071660Jy sigma=1.333252 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.745 mas, bmaj=12.96 mas, bpa=0.4193 degrees ! Estimated noise=0.57416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132969 Jy ! Component: 100 - total flux cleaned = 0.00127983 Jy ! Component: 150 - total flux cleaned = 0.00128226 Jy ! Component: 200 - total flux cleaned = 0.0012498 Jy ! Total flux subtracted in 200 components = 0.0012498 Jy ! Clean residual min=-0.003452 max=0.003342 Jy/beam ! Clean residual mean=0.000007 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.287609 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 166 components and 0.287609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071636Jy sigma=1.332804 ! Fit after self-cal, rms=0.071636Jy sigma=1.332588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037498 Jy ! Component: 100 - total flux cleaned = 0.000376723 Jy ! Component: 150 - total flux cleaned = 0.000314661 Jy ! Component: 200 - total flux cleaned = 0.000287132 Jy ! Total flux subtracted in 200 components = 0.000287132 Jy ! Clean residual min=-0.003334 max=0.003388 Jy/beam ! Clean residual mean=0.000007 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.287896 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 175 components and 0.287896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071609Jy sigma=1.332360 ! Fit after self-cal, rms=0.071610Jy sigma=1.332296 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=7.779 mas, bpa=-7.04 degrees ! Estimated noise=0.440176 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.436 x 7.779 at -7.04 degrees (North through East) ! Clean map min=-0.0031171 max=0.18232 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=6.783 mas, bpa=-7.894 degrees ! Estimated noise=0.606828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134113 Jy ! Component: 100 - total flux cleaned = 0.177145 Jy ! Component: 150 - total flux cleaned = 0.204896 Jy ! Component: 200 - total flux cleaned = 0.224695 Jy ! Total flux subtracted in 200 components = 0.224695 Jy ! Clean residual min=-0.007630 max=0.011175 Jy/beam ! Clean residual mean=-0.000022 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.224695 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.224695 Jy ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=7.779 mas, bpa=-7.04 degrees ! Estimated noise=0.440176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219141 Jy ! Component: 100 - total flux cleaned = 0.035386 Jy ! Component: 150 - total flux cleaned = 0.044166 Jy ! Component: 200 - total flux cleaned = 0.0501716 Jy ! Total flux subtracted in 200 components = 0.0501716 Jy ! Clean residual min=-0.004662 max=0.004573 Jy/beam ! Clean residual mean=-0.000001 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.274866 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 100 components and 0.274866 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.745 mas, bmaj=12.96 mas, bpa=0.4193 degrees ! Estimated noise=0.57416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00670206 Jy ! Component: 100 - total flux cleaned = 0.0101739 Jy ! Component: 150 - total flux cleaned = 0.0119912 Jy ! Component: 200 - total flux cleaned = 0.0123966 Jy ! Total flux subtracted in 200 components = 0.0123966 Jy ! Clean residual min=-0.003523 max=0.003791 Jy/beam ! Clean residual mean=0.000004 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.287263 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390998 Jy ! Component: 100 - total flux cleaned = 0.000490464 Jy ! Component: 150 - total flux cleaned = 0.000580936 Jy ! Component: 200 - total flux cleaned = 0.000580333 Jy ! Total flux subtracted in 200 components = 0.000580333 Jy ! Clean residual min=-0.003353 max=0.003662 Jy/beam ! Clean residual mean=0.000005 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.287843 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 142 components and 0.287843 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=7.779 mas, bpa=-7.04 degrees ! Estimated noise=0.440176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.21057e-05 Jy ! Component: 100 - total flux cleaned = 0.000499582 Jy ! Component: 150 - total flux cleaned = 0.000669541 Jy ! Component: 200 - total flux cleaned = 0.000746525 Jy ! Total flux subtracted in 200 components = 0.000746525 Jy ! Clean residual min=-0.003410 max=0.003100 Jy/beam ! Clean residual mean=0.000003 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.288589 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 161 components and 0.288589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071905Jy sigma=1.335508 ! Fit after self-cal, rms=0.071881Jy sigma=1.334959 wmodel /scr/pima/bg219i_uvs/J1334-1150_S_map.mod ! Writing 161 model components to file: /scr/pima/bg219i_uvs/J1334-1150_S_map.mod wobs /scr/pima/bg219i_uvs/J1334-1150_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J1334-1150_S_uvs.fits wwins /scr/pima/bg219i_uvs/J1334-1150_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219i_uvs/J1334-1150_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000727526 Jy ! Component: 100 - total flux cleaned = -0.00116515 Jy ! Component: 150 - total flux cleaned = -0.0014211 Jy ! Component: 200 - total flux cleaned = -0.00190682 Jy ! Component: 250 - total flux cleaned = -0.0022789 Jy ! Component: 300 - total flux cleaned = -0.00241233 Jy ! Component: 350 - total flux cleaned = -0.00249928 Jy ! Component: 400 - total flux cleaned = -0.00258527 Jy ! Component: 450 - total flux cleaned = -0.00270998 Jy ! Component: 500 - total flux cleaned = -0.00271066 Jy ! Component: 550 - total flux cleaned = -0.00282966 Jy ! Component: 600 - total flux cleaned = -0.00282824 Jy ! Component: 650 - total flux cleaned = -0.00290303 Jy ! Component: 700 - total flux cleaned = -0.00301351 Jy ! Component: 750 - total flux cleaned = -0.00304945 Jy ! Component: 800 - total flux cleaned = -0.00319232 Jy ! Component: 850 - total flux cleaned = -0.00322714 Jy ! Component: 900 - total flux cleaned = -0.00333145 Jy ! Component: 950 - total flux cleaned = -0.00346729 Jy ! Component: 1000 - total flux cleaned = -0.00350047 Jy ! Component: 1050 - total flux cleaned = -0.00359959 Jy ! Component: 1100 - total flux cleaned = -0.00372879 Jy ! Component: 1150 - total flux cleaned = -0.0037609 Jy ! Component: 1200 - total flux cleaned = -0.00385508 Jy ! Component: 1250 - total flux cleaned = -0.00379319 Jy ! Component: 1300 - total flux cleaned = -0.0038855 Jy ! Component: 1350 - total flux cleaned = -0.0038856 Jy ! Component: 1400 - total flux cleaned = -0.00391543 Jy ! Component: 1450 - total flux cleaned = -0.003974 Jy ! Component: 1500 - total flux cleaned = -0.00400333 Jy ! Component: 1550 - total flux cleaned = -0.00400314 Jy ! Component: 1600 - total flux cleaned = -0.00405916 Jy ! Component: 1650 - total flux cleaned = -0.00403099 Jy ! Component: 1700 - total flux cleaned = -0.00408596 Jy ! Component: 1750 - total flux cleaned = -0.00400454 Jy ! Component: 1800 - total flux cleaned = -0.00405885 Jy ! Component: 1850 - total flux cleaned = -0.00416573 Jy ! Component: 1900 - total flux cleaned = -0.00416564 Jy ! Component: 1950 - total flux cleaned = -0.00416562 Jy ! Component: 2000 - total flux cleaned = -0.00421713 Jy ! Component: 2050 - total flux cleaned = -0.00424229 Jy ! Component: 2100 - total flux cleaned = -0.00424259 Jy ! Component: 2150 - total flux cleaned = -0.00429232 Jy ! Component: 2200 - total flux cleaned = -0.00429235 Jy ! Component: 2250 - total flux cleaned = -0.00431684 Jy ! Component: 2300 - total flux cleaned = -0.0043652 Jy ! Component: 2350 - total flux cleaned = -0.00446076 Jy ! Component: 2400 - total flux cleaned = -0.00446053 Jy ! Component: 2450 - total flux cleaned = -0.00453073 Jy ! Component: 2500 - total flux cleaned = -0.00455372 Jy ! Component: 2550 - total flux cleaned = -0.00457659 Jy ! Component: 2600 - total flux cleaned = -0.00462227 Jy ! Component: 2650 - total flux cleaned = -0.00462225 Jy ! Component: 2700 - total flux cleaned = -0.00466683 Jy ! Component: 2750 - total flux cleaned = -0.00466699 Jy ! Component: 2800 - total flux cleaned = -0.00471092 Jy ! Component: 2850 - total flux cleaned = -0.00471081 Jy ! Component: 2900 - total flux cleaned = -0.00464661 Jy ! Component: 2950 - total flux cleaned = -0.00462528 Jy ! Component: 3000 - total flux cleaned = -0.00456223 Jy ! Component: 3050 - total flux cleaned = -0.00456214 Jy ! Component: 3100 - total flux cleaned = -0.00454127 Jy ! Component: 3150 - total flux cleaned = -0.00450038 Jy ! Component: 3200 - total flux cleaned = -0.004419 Jy ! Component: 3250 - total flux cleaned = -0.00435863 Jy ! Component: 3300 - total flux cleaned = -0.00431884 Jy ! Component: 3350 - total flux cleaned = -0.00429916 Jy ! Component: 3400 - total flux cleaned = -0.0042201 Jy ! Component: 3450 - total flux cleaned = -0.0042201 Jy ! Component: 3500 - total flux cleaned = -0.00410365 Jy ! Component: 3550 - total flux cleaned = -0.00406539 Jy ! Component: 3600 - total flux cleaned = -0.0040844 Jy ! Component: 3650 - total flux cleaned = -0.00404616 Jy ! Component: 3700 - total flux cleaned = -0.00400836 Jy ! Component: 3750 - total flux cleaned = -0.0039333 Jy ! Component: 3800 - total flux cleaned = -0.00393338 Jy ! Component: 3850 - total flux cleaned = -0.00389649 Jy ! Component: 3900 - total flux cleaned = -0.00387793 Jy ! Component: 3950 - total flux cleaned = -0.00380486 Jy ! Component: 4000 - total flux cleaned = -0.00375038 Jy ! Component: 4050 - total flux cleaned = -0.00366049 Jy ! Total flux subtracted in 4096 components = -0.00367831 Jy ! Clean residual min=-0.001002 max=0.001045 Jy/beam ! Clean residual mean=0.000002 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.284911 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 437 components and 0.284911 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J1334-1150_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.436 x 7.779 at -7.04 degrees (North through East) ! Clean map min=-0.0024363 max=0.17856 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1334-1150_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.178564 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000322616 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.542018 0.542018 1.08404 2.16807 4.33615 8.67229 17.3446 34.6892 69.3784 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.178 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 553.486 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J1334-1150_S_uvs.log closed on Wed Apr 6 23:04:24 2016