! Started logfile: /scr/pima/bg219i_uvs/J1332-1256_S_uvs.log on Wed Apr 6 23:04:00 2016 obs /scr/pima/bg219i_uvs/J1332-1256_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J1332-1256_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.901754 visibilities/baseline/integration-bin. ! Found source: J1332-1256 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 9252 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1332-1256_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007083Jy sigma=20.758640 ! Fit after self-cal, rms=0.878396Jy sigma=18.111781 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=6.516 mas, bpa=-6.157 degrees ! Estimated noise=0.595564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0933114 Jy ! Component: 100 - total flux cleaned = 0.114573 Jy ! Total flux subtracted in 100 components = 0.114573 Jy ! Clean residual min=-0.004812 max=0.007884 Jy/beam ! Clean residual mean=-0.000016 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.114573 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.114573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072167Jy sigma=1.390373 ! Fit after self-cal, rms=0.072138Jy sigma=1.389995 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920585 Jy ! Component: 100 - total flux cleaned = 0.014462 Jy ! Total flux subtracted in 100 components = 0.014462 Jy ! Clean residual min=-0.003886 max=0.003828 Jy/beam ! Clean residual mean=-0.000001 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.129035 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.129035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070654Jy sigma=1.357803 ! Fit after self-cal, rms=0.070598Jy sigma=1.357114 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=7.542 mas, bpa=-5.759 degrees ! Estimated noise=0.368471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046936 Jy ! Component: 100 - total flux cleaned = 0.00700358 Jy ! Component: 150 - total flux cleaned = 0.00828497 Jy ! Component: 200 - total flux cleaned = 0.00900824 Jy ! Total flux subtracted in 200 components = 0.00900824 Jy ! Clean residual min=-0.002792 max=0.002870 Jy/beam ! Clean residual mean=0.000011 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.138043 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.138043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070298Jy sigma=1.350849 ! Fit after self-cal, rms=0.070288Jy sigma=1.350738 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 7.542 at -5.759 degrees (North through East) ! Clean map min=-0.0026915 max=0.12298 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.05 KP 1.03 ! LA 0.98 MK 0.99 NL 1.17 OV 1.02 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.04 KP 0.97 ! LA 0.95 MK 1.00 NL 1.09 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 1.01 ! LA 0.98 MK 0.97 NL 0.96 OV 1.00 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 0.97 KP 0.98 ! LA 0.98 MK 1.01 NL 0.99 OV 0.99 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.070288Jy sigma=1.350738 ! Fit after self-cal, rms=0.069799Jy sigma=1.343675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=7.543 mas, bpa=-5.734 degrees ! Estimated noise=0.367639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.22625e-05 Jy ! Component: 100 - total flux cleaned = -1.17055e-05 Jy ! Component: 150 - total flux cleaned = -1.19669e-05 Jy ! Component: 200 - total flux cleaned = -2.48867e-05 Jy ! Total flux subtracted in 200 components = -2.48867e-05 Jy ! Clean residual min=-0.002547 max=0.002646 Jy/beam ! Clean residual mean=0.000022 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.138018 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.138018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069790Jy sigma=1.343513 ! Fit after self-cal, rms=0.069808Jy sigma=1.343402 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069808Jy sigma=1.343402 ! Fit after self-cal, rms=0.069960Jy sigma=1.336804 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=7.564 mas, bpa=-5.78 degrees ! Estimated noise=0.367716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276252 Jy ! Component: 100 - total flux cleaned = 0.00024573 Jy ! Component: 150 - total flux cleaned = 0.000245363 Jy ! Component: 200 - total flux cleaned = 0.000233828 Jy ! Total flux subtracted in 200 components = 0.000233828 Jy ! Clean residual min=-0.002039 max=0.002268 Jy/beam ! Clean residual mean=0.000010 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.138252 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.138252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069954Jy sigma=1.336623 ! Fit after self-cal, rms=0.069962Jy sigma=1.336516 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019769 Jy ! Component: 100 - total flux cleaned = 0.00256372 Jy ! Component: 150 - total flux cleaned = 0.00271161 Jy ! Component: 200 - total flux cleaned = 0.00284056 Jy ! Total flux subtracted in 200 components = 0.00284056 Jy ! Clean residual min=-0.001848 max=0.001679 Jy/beam ! Clean residual mean=0.000008 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.141093 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.141093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069895Jy sigma=1.335072 ! Fit after self-cal, rms=0.069892Jy sigma=1.334970 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069892Jy sigma=1.334970 ! Fit after self-cal, rms=0.069894Jy sigma=1.334854 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=7.557 mas, bpa=-5.66 degrees ! Estimated noise=0.367667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000717474 Jy ! Component: 100 - total flux cleaned = 0.000833925 Jy ! Component: 150 - total flux cleaned = 0.000884611 Jy ! Component: 200 - total flux cleaned = 0.000883911 Jy ! Total flux subtracted in 200 components = 0.000883911 Jy ! Clean residual min=-0.001736 max=0.001712 Jy/beam ! Clean residual mean=0.000008 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.141977 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.141977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069873Jy sigma=1.334405 ! Fit after self-cal, rms=0.069872Jy sigma=1.334388 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190841 Jy ! Component: 100 - total flux cleaned = 0.000211306 Jy ! Component: 150 - total flux cleaned = 0.00023045 Jy ! Component: 200 - total flux cleaned = 0.000247669 Jy ! Total flux subtracted in 200 components = 0.000247669 Jy ! Clean residual min=-0.001727 max=0.001723 Jy/beam ! Clean residual mean=0.000007 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.142224 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.142224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069863Jy sigma=1.334188 ! Fit after self-cal, rms=0.069863Jy sigma=1.334185 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069863Jy sigma=1.334185 ! Fit after self-cal, rms=0.069868Jy sigma=1.334140 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.859 mas, bmaj=13.05 mas, bpa=1.175 degrees ! Estimated noise=0.474202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170848 Jy ! Component: 100 - total flux cleaned = 0.000173151 Jy ! Component: 150 - total flux cleaned = 0.000172424 Jy ! Component: 200 - total flux cleaned = 0.000158589 Jy ! Total flux subtracted in 200 components = 0.000158589 Jy ! Clean residual min=-0.001687 max=0.001574 Jy/beam ! Clean residual mean=0.000017 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.142383 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 111 components and 0.142383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069868Jy sigma=1.334119 ! Fit after self-cal, rms=0.069866Jy sigma=1.334066 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58629e-05 Jy ! Component: 100 - total flux cleaned = 3.08888e-05 Jy ! Component: 150 - total flux cleaned = -5.72141e-06 Jy ! Component: 200 - total flux cleaned = -2.78662e-05 Jy ! Total flux subtracted in 200 components = -2.78662e-05 Jy ! Clean residual min=-0.001685 max=0.001594 Jy/beam ! Clean residual mean=0.000017 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.142355 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.142355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069866Jy sigma=1.334052 ! Fit after self-cal, rms=0.069866Jy sigma=1.334019 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=7.559 mas, bpa=-5.599 degrees ! Estimated noise=0.367656 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 7.559 at -5.599 degrees (North through East) ! Clean map min=-0.0017177 max=0.1227 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=6.546 mas, bpa=-6.094 degrees ! Estimated noise=0.593012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0928192 Jy ! Component: 100 - total flux cleaned = 0.114334 Jy ! Component: 150 - total flux cleaned = 0.123365 Jy ! Component: 200 - total flux cleaned = 0.128596 Jy ! Total flux subtracted in 200 components = 0.128596 Jy ! Clean residual min=-0.003503 max=0.004249 Jy/beam ! Clean residual mean=-0.000001 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.128596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.128596 Jy ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=7.559 mas, bpa=-5.599 degrees ! Estimated noise=0.367656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518356 Jy ! Component: 100 - total flux cleaned = 0.00795082 Jy ! Component: 150 - total flux cleaned = 0.00976675 Jy ! Component: 200 - total flux cleaned = 0.0110902 Jy ! Total flux subtracted in 200 components = 0.0110902 Jy ! Clean residual min=-0.002063 max=0.001979 Jy/beam ! Clean residual mean=0.000008 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.139687 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 59 components and 0.139687 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.859 mas, bmaj=13.05 mas, bpa=1.175 degrees ! Estimated noise=0.474202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151065 Jy ! Component: 100 - total flux cleaned = 0.00176955 Jy ! Component: 150 - total flux cleaned = 0.00186768 Jy ! Component: 200 - total flux cleaned = 0.00195045 Jy ! Total flux subtracted in 200 components = 0.00195045 Jy ! Clean residual min=-0.001858 max=0.001656 Jy/beam ! Clean residual mean=0.000018 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.141637 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.50426e-05 Jy ! Component: 100 - total flux cleaned = 0.000145067 Jy ! Component: 150 - total flux cleaned = 0.000193457 Jy ! Component: 200 - total flux cleaned = 0.000239366 Jy ! Total flux subtracted in 200 components = 0.000239366 Jy ! Clean residual min=-0.001778 max=0.001607 Jy/beam ! Clean residual mean=0.000017 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.141876 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.141876 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=7.559 mas, bpa=-5.599 degrees ! Estimated noise=0.367656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.04278e-05 Jy ! Component: 100 - total flux cleaned = 5.4461e-05 Jy ! Component: 150 - total flux cleaned = 2.47387e-05 Jy ! Component: 200 - total flux cleaned = 2.48e-05 Jy ! Total flux subtracted in 200 components = 2.48e-05 Jy ! Clean residual min=-0.001858 max=0.001731 Jy/beam ! Clean residual mean=0.000008 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.141901 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.141901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069885Jy sigma=1.334499 ! Fit after self-cal, rms=0.069882Jy sigma=1.334368 wmodel /scr/pima/bg219i_uvs/J1332-1256_S_map.mod ! Writing 104 model components to file: /scr/pima/bg219i_uvs/J1332-1256_S_map.mod wobs /scr/pima/bg219i_uvs/J1332-1256_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J1332-1256_S_uvs.fits wwins /scr/pima/bg219i_uvs/J1332-1256_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219i_uvs/J1332-1256_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133153 Jy ! Component: 100 - total flux cleaned = -0.000195641 Jy ! Component: 150 - total flux cleaned = -0.000281493 Jy ! Component: 200 - total flux cleaned = -0.000309217 Jy ! Component: 250 - total flux cleaned = -0.000201204 Jy ! Component: 300 - total flux cleaned = -0.000148359 Jy ! Component: 350 - total flux cleaned = -0.000122427 Jy ! Component: 400 - total flux cleaned = -7.1537e-05 Jy ! Component: 450 - total flux cleaned = -0.00012043 Jy ! Component: 500 - total flux cleaned = -0.000120092 Jy ! Component: 550 - total flux cleaned = -9.65947e-05 Jy ! Component: 600 - total flux cleaned = -0.000119978 Jy ! Component: 650 - total flux cleaned = -0.000165618 Jy ! Component: 700 - total flux cleaned = -0.000232866 Jy ! Component: 750 - total flux cleaned = -0.000276887 Jy ! Component: 800 - total flux cleaned = -0.00032035 Jy ! Component: 850 - total flux cleaned = -0.000404937 Jy ! Component: 900 - total flux cleaned = -0.000446685 Jy ! Component: 950 - total flux cleaned = -0.000426494 Jy ! Component: 1000 - total flux cleaned = -0.000467188 Jy ! Component: 1050 - total flux cleaned = -0.000427608 Jy ! Component: 1100 - total flux cleaned = -0.000467256 Jy ! Component: 1150 - total flux cleaned = -0.000428934 Jy ! Component: 1200 - total flux cleaned = -0.000505668 Jy ! Component: 1250 - total flux cleaned = -0.000467834 Jy ! Component: 1300 - total flux cleaned = -0.000468003 Jy ! Component: 1350 - total flux cleaned = -0.000449643 Jy ! Component: 1400 - total flux cleaned = -0.000431526 Jy ! Component: 1450 - total flux cleaned = -0.000449853 Jy ! Component: 1500 - total flux cleaned = -0.000485267 Jy ! Component: 1550 - total flux cleaned = -0.000485347 Jy ! Component: 1600 - total flux cleaned = -0.000485457 Jy ! Component: 1650 - total flux cleaned = -0.000519776 Jy ! Component: 1700 - total flux cleaned = -0.00055365 Jy ! Component: 1750 - total flux cleaned = -0.000536896 Jy ! Component: 1800 - total flux cleaned = -0.000586847 Jy ! Component: 1850 - total flux cleaned = -0.000554405 Jy ! Component: 1900 - total flux cleaned = -0.00058703 Jy ! Component: 1950 - total flux cleaned = -0.00065109 Jy ! Component: 2000 - total flux cleaned = -0.000699047 Jy ! Component: 2050 - total flux cleaned = -0.000746006 Jy ! Component: 2100 - total flux cleaned = -0.000761555 Jy ! Component: 2150 - total flux cleaned = -0.000792243 Jy ! Component: 2200 - total flux cleaned = -0.000868404 Jy ! Component: 2250 - total flux cleaned = -0.000883595 Jy ! Component: 2300 - total flux cleaned = -0.00086853 Jy ! Component: 2350 - total flux cleaned = -0.00088353 Jy ! Component: 2400 - total flux cleaned = -0.000883612 Jy ! Component: 2450 - total flux cleaned = -0.000956336 Jy ! Component: 2500 - total flux cleaned = -0.000956228 Jy ! Component: 2550 - total flux cleaned = -0.000956202 Jy ! Component: 2600 - total flux cleaned = -0.000998665 Jy ! Component: 2650 - total flux cleaned = -0.000984663 Jy ! Component: 2700 - total flux cleaned = -0.000942712 Jy ! Component: 2750 - total flux cleaned = -0.000942701 Jy ! Component: 2800 - total flux cleaned = -0.000970053 Jy ! Component: 2850 - total flux cleaned = -0.000970074 Jy ! Component: 2900 - total flux cleaned = -0.000996933 Jy ! Component: 2950 - total flux cleaned = -0.000969959 Jy ! Component: 3000 - total flux cleaned = -0.000996252 Jy ! Component: 3050 - total flux cleaned = -0.000982801 Jy ! Component: 3100 - total flux cleaned = -0.000943407 Jy ! Component: 3150 - total flux cleaned = -0.000982338 Jy ! Component: 3200 - total flux cleaned = -0.000956501 Jy ! Component: 3250 - total flux cleaned = -0.00102054 Jy ! Component: 3300 - total flux cleaned = -0.00100787 Jy ! Component: 3350 - total flux cleaned = -0.000995319 Jy ! Component: 3400 - total flux cleaned = -0.000995393 Jy ! Component: 3450 - total flux cleaned = -0.000958193 Jy ! Component: 3500 - total flux cleaned = -0.00101999 Jy ! Component: 3550 - total flux cleaned = -0.00104444 Jy ! Component: 3600 - total flux cleaned = -0.00100791 Jy ! Component: 3650 - total flux cleaned = -0.00103198 Jy ! Component: 3700 - total flux cleaned = -0.00105584 Jy ! Component: 3750 - total flux cleaned = -0.001032 Jy ! Component: 3800 - total flux cleaned = -0.00109116 Jy ! Component: 3850 - total flux cleaned = -0.00109108 Jy ! Component: 3900 - total flux cleaned = -0.00110265 Jy ! Component: 3950 - total flux cleaned = -0.00110258 Jy ! Component: 4000 - total flux cleaned = -0.00112557 Jy ! Component: 4050 - total flux cleaned = -0.00110268 Jy ! Total flux subtracted in 4096 components = -0.00115951 Jy ! Clean residual min=-0.000644 max=0.000686 Jy/beam ! Clean residual mean=0.000002 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.140742 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 389 components and 0.140742 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J1332-1256_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 7.559 at -5.599 degrees (North through East) ! Clean map min=-0.0011978 max=0.12262 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1332-1256_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.122622 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200826 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.491331 0.491331 0.982661 1.96532 3.93064 7.86129 15.7226 31.4452 62.8903 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.122 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 610.586 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J1332-1256_S_uvs.log closed on Wed Apr 6 23:04:04 2016