! Started logfile: /scr/pima/bg219i_uvs/J1325-1117_X_dfm.log on Thu May 19 23:21:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1325-1117_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1325-1117_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.572577 visibilities/baseline/integration-bin.
! Found source: J1325-1117
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14532 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1325-1117_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 98 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004399Jy  sigma=24.262502
! Fit after  self-cal, rms=0.909064Jy  sigma=21.933049
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.718 mas, bmaj=1.905 mas, bpa=-10.39 degrees
! Estimated noise=0.459313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068418 Jy
! Component: 100  -  total flux cleaned = 0.0869293 Jy
! Total flux subtracted in 100 components = 0.0869293 Jy
! Clean residual min=-0.004214 max=0.007642 Jy/beam
! Clean residual mean=-0.000001 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.0869293 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0869293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067590Jy  sigma=1.488795
! Fit after  self-cal, rms=0.067230Jy  sigma=1.482602
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00830345 Jy
! Component: 100  -  total flux cleaned = 0.0126432 Jy
! Total flux subtracted in 100 components = 0.0126432 Jy
! Clean residual min=-0.003404 max=0.003872 Jy/beam
! Clean residual mean=0.000001 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.0995725 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.0995726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065920Jy  sigma=1.442126
! Fit after  self-cal, rms=0.065897Jy  sigma=1.441501
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9098 mas, bmaj=2.369 mas, bpa=-9.369 degrees
! Estimated noise=0.253504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464688 Jy
! Component: 100  -  total flux cleaned = 0.00708915 Jy
! Component: 150  -  total flux cleaned = 0.00854237 Jy
! Component: 200  -  total flux cleaned = 0.0094173 Jy
! Total flux subtracted in 200 components = 0.0094173 Jy
! Clean residual min=-0.002639 max=0.003324 Jy/beam
! Clean residual mean=0.000010 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.10899 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 44 components and 0.10899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065650Jy  sigma=1.431846
! Fit after  self-cal, rms=0.065652Jy  sigma=1.431630
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9098 x 2.369 at -9.369 degrees (North through East)
! Clean map  min=-0.0025149  max=0.091059 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.99     KP        0.97     
!   LA        0.96     MK        1.03     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.04     HN        1.10     KP        1.00     
!   LA        0.97     MK        1.05     NL        0.98     OV        0.95     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        1.07     KP        0.95     
!   LA        0.97     MK        1.02     NL        1.04     OV        0.95     
!   PT        1.03     SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        1.04     KP        0.96     
!   LA        0.97     MK        0.98     NL        1.06     OV        0.98     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.17     KP        1.02     
!   LA        0.93     MK        0.95     NL        1.04     OV        0.95     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.07     HN        1.10     KP        1.00     
!   LA        0.96     MK        1.02     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        1.04     KP        0.93     
!   LA        0.97     MK        1.06     NL        0.98     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.97     KP        1.01     
!   LA        0.97     MK        0.99     NL        1.07     OV        0.93     
!   PT        0.97     SC        0.90     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        0.98     KP        0.97     
!   LA        0.98     MK        0.97     NL        1.00     OV        0.99     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.03     KP        1.02     
!   LA        0.93     MK        0.94     NL        1.01     OV        1.04     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        0.94     KP        0.96     
!   LA        0.96     MK        0.98     NL        0.95     OV        1.01     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.03     KP        0.96     
!   LA        1.01     MK        0.96     NL        1.06     OV        0.97     
!   PT        1.00     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.065652Jy  sigma=1.431630
! Fit after  self-cal, rms=0.065720Jy  sigma=1.424780
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.911 mas, bmaj=2.378 mas, bpa=-9.239 degrees
! Estimated noise=0.252396 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000457816 Jy
! Component: 100  -  total flux cleaned = -0.00050993 Jy
! Component: 150  -  total flux cleaned = -0.000524983 Jy
! Component: 200  -  total flux cleaned = -0.000525963 Jy
! Total flux subtracted in 200 components = -0.000525963 Jy
! Clean residual min=-0.002264 max=0.002679 Jy/beam
! Clean residual mean=0.000010 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.108464 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 50 components and 0.108464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065706Jy  sigma=1.424620
! Fit after  self-cal, rms=0.065735Jy  sigma=1.424376
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065735Jy  sigma=1.424376
! Fit after  self-cal, rms=0.067560Jy  sigma=1.417350
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9106 mas, bmaj=2.381 mas, bpa=-9.035 degrees
! Estimated noise=0.252374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000125864 Jy
! Component: 100  -  total flux cleaned = -0.000212428 Jy
! Component: 150  -  total flux cleaned = -0.000249538 Jy
! Component: 200  -  total flux cleaned = -0.000299465 Jy
! Total flux subtracted in 200 components = -0.000299465 Jy
! Clean residual min=-0.001559 max=0.003046 Jy/beam
! Clean residual mean=-0.000001 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.108164 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 57 components and 0.108164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067547Jy  sigma=1.417020
! Fit after  self-cal, rms=0.067603Jy  sigma=1.416869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243555 Jy
! Component: 100  -  total flux cleaned = 0.00243489 Jy
! Component: 150  -  total flux cleaned = 0.00235572 Jy
! Component: 200  -  total flux cleaned = 0.00225557 Jy
! Total flux subtracted in 200 components = 0.00225557 Jy
! Clean residual min=-0.001371 max=0.001867 Jy/beam
! Clean residual mean=-0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.11042 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.11042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067489Jy  sigma=1.414077
! Fit after  self-cal, rms=0.067480Jy  sigma=1.413816
! Inverting map 
! Added new window around map position (-1.2, -30.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132628 Jy
! Component: 100  -  total flux cleaned = 0.0017231 Jy
! Component: 150  -  total flux cleaned = 0.00169456 Jy
! Component: 200  -  total flux cleaned = 0.00161641 Jy
! Total flux subtracted in 200 components = 0.00161641 Jy
! Clean residual min=-0.001352 max=0.001456 Jy/beam
! Clean residual mean=-0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.112036 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 90 components and 0.112036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067435Jy  sigma=1.412657
! Fit after  self-cal, rms=0.067426Jy  sigma=1.412582
! Inverting map 
! Added new window around map position (-35.6, -18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000901451 Jy
! Component: 100  -  total flux cleaned = 0.000991083 Jy
! Component: 150  -  total flux cleaned = 0.000963342 Jy
! Component: 200  -  total flux cleaned = 0.000890577 Jy
! Total flux subtracted in 200 components = 0.000890577 Jy
! Clean residual min=-0.001324 max=0.001188 Jy/beam
! Clean residual mean=-0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.112927 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 106 components and 0.112927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067390Jy  sigma=1.411822
! Fit after  self-cal, rms=0.067388Jy  sigma=1.411763
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067388Jy  sigma=1.411763
! Fit after  self-cal, rms=0.067069Jy  sigma=1.411355
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.908 mas, bmaj=2.371 mas, bpa=-8.904 degrees
! Estimated noise=0.250848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000874905 Jy
! Component: 100  -  total flux cleaned = 0.00131584 Jy
! Component: 150  -  total flux cleaned = 0.00144831 Jy
! Component: 200  -  total flux cleaned = 0.0014485 Jy
! Total flux subtracted in 200 components = 0.0014485 Jy
! Clean residual min=-0.001239 max=0.001150 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.114375 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 127 components and 0.114375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067049Jy  sigma=1.410923
! Fit after  self-cal, rms=0.067051Jy  sigma=1.410893
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156117 Jy
! Component: 100  -  total flux cleaned = 0.000175556 Jy
! Component: 150  -  total flux cleaned = 0.000157919 Jy
! Component: 200  -  total flux cleaned = 0.000158241 Jy
! Total flux subtracted in 200 components = 0.000158241 Jy
! Clean residual min=-0.001225 max=0.001117 Jy/beam
! Clean residual mean=-0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.114534 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 135 components and 0.114534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067040Jy  sigma=1.410659
! Fit after  self-cal, rms=0.067040Jy  sigma=1.410653
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067040Jy  sigma=1.410653
! Fit after  self-cal, rms=0.066965Jy  sigma=1.410604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.321 mas, bmaj=4.294 mas, bpa=-4.777 degrees
! Estimated noise=0.322636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.68322e-05 Jy
! Component: 100  -  total flux cleaned = 5.0785e-06 Jy
! Component: 150  -  total flux cleaned = -9.30574e-06 Jy
! Component: 200  -  total flux cleaned = -8.73839e-06 Jy
! Total flux subtracted in 200 components = -8.73839e-06 Jy
! Clean residual min=-0.001001 max=0.001274 Jy/beam
! Clean residual mean=-0.000002 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.114525 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 149 components and 0.114525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066959Jy  sigma=1.410525
! Fit after  self-cal, rms=0.066961Jy  sigma=1.410500
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-39.2, 14.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000339972 Jy
! Component: 100  -  total flux cleaned = 0.000398112 Jy
! Component: 150  -  total flux cleaned = 0.000469919 Jy
! Component: 200  -  total flux cleaned = 0.000430723 Jy
! Total flux subtracted in 200 components = 0.000430723 Jy
! Clean residual min=-0.000950 max=0.000745 Jy/beam
! Clean residual mean=-0.000002 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.114956 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 177 components and 0.114956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066939Jy  sigma=1.409960
! Fit after  self-cal, rms=0.066942Jy  sigma=1.409892
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.368 mas, bpa=-8.856 degrees
! Estimated noise=0.250555 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 2.368 at -8.856 degrees (North through East)
! Clean map  min=-0.001043  max=0.090441 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7144 mas, bmaj=1.899 mas, bpa=-9.879 degrees
! Estimated noise=0.453779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0677989 Jy
! Component: 100  -  total flux cleaned = 0.0864599 Jy
! Component: 150  -  total flux cleaned = 0.0948626 Jy
! Component: 200  -  total flux cleaned = 0.0995638 Jy
! Total flux subtracted in 200 components = 0.0995638 Jy
! Clean residual min=-0.003095 max=0.003183 Jy/beam
! Clean residual mean=-0.000002 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.0995638 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0995638 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.368 mas, bpa=-8.856 degrees
! Estimated noise=0.250555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00492495 Jy
! Component: 100  -  total flux cleaned = 0.00789862 Jy
! Component: 150  -  total flux cleaned = 0.0101053 Jy
! Component: 200  -  total flux cleaned = 0.0116656 Jy
! Total flux subtracted in 200 components = 0.0116656 Jy
! Clean residual min=-0.001518 max=0.001398 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.111229 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 57 components and 0.111229 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.321 mas, bmaj=4.294 mas, bpa=-4.777 degrees
! Estimated noise=0.322636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128786 Jy
! Component: 100  -  total flux cleaned = 0.00178786 Jy
! Component: 150  -  total flux cleaned = 0.00225302 Jy
! Component: 200  -  total flux cleaned = 0.00269555 Jy
! Total flux subtracted in 200 components = 0.00269555 Jy
! Clean residual min=-0.001135 max=0.001111 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.113925 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284363 Jy
! Component: 100  -  total flux cleaned = 0.000570581 Jy
! Component: 150  -  total flux cleaned = 0.000742705 Jy
! Component: 200  -  total flux cleaned = 0.000820818 Jy
! Total flux subtracted in 200 components = 0.000820818 Jy
! Clean residual min=-0.000996 max=0.000949 Jy/beam
! Clean residual mean=-0.000002 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.114746 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 116 components and 0.114746 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.907 mas, bmaj=2.368 mas, bpa=-8.856 degrees
! Estimated noise=0.250555 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00022943 Jy
! Component: 100  -  total flux cleaned = -0.000229587 Jy
! Component: 150  -  total flux cleaned = -0.000228286 Jy
! Component: 200  -  total flux cleaned = -0.000140456 Jy
! Total flux subtracted in 200 components = -0.000140456 Jy
! Clean residual min=-0.001277 max=0.001000 Jy/beam
! Clean residual mean=-0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.114605 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 148 components and 0.114605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066953Jy  sigma=1.410409
! Fit after  self-cal, rms=0.066950Jy  sigma=1.410257
wmodel /J1325-1117_X_map.mod
! wmodel: Unable to open new model file: /J1325-1117_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1325-1117_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.907 x 2.368 at -8.856 degrees (North through East)
! Clean map  min=-0.0010954  max=0.090642 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1325-1117_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0906418 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000260125 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.860943 0.860943 1.72189 3.44377 6.88754 13.7751 27.5502 55.1004
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.09 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  348.455 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1325-1117_X_dfm.log closed on Thu May 19 23:21:33 2016