! Started logfile: /scr/pima/bg219i_uvs/J1324-3235_X_dfm.log on Thu May 19 23:21:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1324-3235_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1324-3235_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.79537 visibilities/baseline/integration-bin.
! Found source: J1324-3235
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20616 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1324-3235_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014654Jy  sigma=19.919760
! Fit after  self-cal, rms=0.850468Jy  sigma=16.632843
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5968 mas, bmaj=1.687 mas, bpa=-8.679 degrees
! Estimated noise=0.51703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112132 Jy
! Component: 100  -  total flux cleaned = 0.136677 Jy
! Total flux subtracted in 100 components = 0.136677 Jy
! Clean residual min=-0.005840 max=0.014983 Jy/beam
! Clean residual mean=-0.000004 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.136677 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.136677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082792Jy  sigma=1.527488
! Fit after  self-cal, rms=0.082763Jy  sigma=1.527021
! Inverting map 
! Added new window around map position (-1.4, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143886 Jy
! Component: 100  -  total flux cleaned = 0.0233083 Jy
! Total flux subtracted in 100 components = 0.0233083 Jy
! Clean residual min=-0.005029 max=0.009616 Jy/beam
! Clean residual mean=-0.000003 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 0.159985 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.159985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078155Jy  sigma=1.422798
! Fit after  self-cal, rms=0.078001Jy  sigma=1.419198
! Inverting map 
! Added new window around map position (0.8, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848818 Jy
! Component: 100  -  total flux cleaned = 0.0142455 Jy
! Total flux subtracted in 100 components = 0.0142455 Jy
! Clean residual min=-0.004406 max=0.005065 Jy/beam
! Clean residual mean=-0.000002 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.174231 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.174231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076258Jy  sigma=1.381062
! Fit after  self-cal, rms=0.076257Jy  sigma=1.380697
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8065 mas, bmaj=2.13 mas, bpa=-8.063 degrees
! Estimated noise=0.258452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00858063 Jy
! Component: 100  -  total flux cleaned = 0.0137043 Jy
! Component: 150  -  total flux cleaned = 0.0169804 Jy
! Component: 200  -  total flux cleaned = 0.0191066 Jy
! Total flux subtracted in 200 components = 0.0191066 Jy
! Clean residual min=-0.003180 max=0.005110 Jy/beam
! Clean residual mean=-0.000005 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 0.193337 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 50 components and 0.193337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075231Jy  sigma=1.358605
! Fit after  self-cal, rms=0.075225Jy  sigma=1.357779
! Inverting map 
! Added new window around map position (-3, -6.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540692 Jy
! Component: 100  -  total flux cleaned = 0.00825674 Jy
! Component: 150  -  total flux cleaned = 0.0100236 Jy
! Component: 200  -  total flux cleaned = 0.0106488 Jy
! Total flux subtracted in 200 components = 0.0106488 Jy
! Clean residual min=-0.002434 max=0.003282 Jy/beam
! Clean residual mean=-0.000001 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.203986 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 69 components and 0.203986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074826Jy  sigma=1.349473
! Fit after  self-cal, rms=0.074795Jy  sigma=1.348463
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8065 x 2.13 at -8.063 degrees (North through East)
! Clean map  min=-0.0022942  max=0.1427 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.12     KP        0.99     
!   LA        0.97     MK        1.05     NL        1.04     OV        1.00     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.14     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        1.16     KP        1.03     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.16     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.08     KP        1.01     
!   LA        1.00     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.12     KP        0.98     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        1.05     KP        1.01     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.99     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.06     KP        1.00     
!   LA        0.96     MK        1.04     NL        0.99     OV        0.97     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.10     KP        1.01     
!   LA        1.02     MK        1.01     NL        0.95     OV        1.01     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.08     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.02     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.06     KP        0.99     
!   LA        0.98     MK        0.98     NL        0.98     OV        0.98     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.09     KP        0.97     
!   LA        0.99     MK        0.98     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.074795Jy  sigma=1.348463
! Fit after  self-cal, rms=0.076347Jy  sigma=1.343552
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8072 mas, bmaj=2.127 mas, bpa=-7.86 degrees
! Estimated noise=0.258977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128444 Jy
! Component: 100  -  total flux cleaned = 0.00176566 Jy
! Component: 150  -  total flux cleaned = 0.00187693 Jy
! Component: 200  -  total flux cleaned = 0.0019676 Jy
! Total flux subtracted in 200 components = 0.0019676 Jy
! Clean residual min=-0.002077 max=0.002300 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.205954 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 95 components and 0.205954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076288Jy  sigma=1.342383
! Fit after  self-cal, rms=0.076321Jy  sigma=1.342103
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076321Jy  sigma=1.342103
! Fit after  self-cal, rms=0.076542Jy  sigma=1.336234
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8082 mas, bmaj=2.127 mas, bpa=-7.833 degrees
! Estimated noise=0.259007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652771 Jy
! Component: 100  -  total flux cleaned = 0.000650981 Jy
! Component: 150  -  total flux cleaned = 0.000578383 Jy
! Component: 200  -  total flux cleaned = 0.000500908 Jy
! Total flux subtracted in 200 components = 0.000500908 Jy
! Clean residual min=-0.001668 max=0.001839 Jy/beam
! Clean residual mean=-0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.206454 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 107 components and 0.206454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076510Jy  sigma=1.335794
! Fit after  self-cal, rms=0.076537Jy  sigma=1.335606
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.8, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153295 Jy
! Component: 100  -  total flux cleaned = 0.00206008 Jy
! Component: 150  -  total flux cleaned = 0.00214317 Jy
! Component: 200  -  total flux cleaned = 0.00219015 Jy
! Total flux subtracted in 200 components = 0.00219015 Jy
! Clean residual min=-0.001505 max=0.001685 Jy/beam
! Clean residual mean=-0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.208645 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 123 components and 0.208645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076490Jy  sigma=1.335001
! Fit after  self-cal, rms=0.076489Jy  sigma=1.334923
! Inverting map 
! Added new window around map position (-5.4, -8.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149689 Jy
! Component: 100  -  total flux cleaned = 0.00195136 Jy
! Component: 150  -  total flux cleaned = 0.00216803 Jy
! Component: 200  -  total flux cleaned = 0.00226499 Jy
! Total flux subtracted in 200 components = 0.00226499 Jy
! Clean residual min=-0.001403 max=0.001297 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.21091 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 136 components and 0.21091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076452Jy  sigma=1.334221
! Fit after  self-cal, rms=0.076446Jy  sigma=1.334169
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076446Jy  sigma=1.334169
! Fit after  self-cal, rms=0.076444Jy  sigma=1.334103
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8093 mas, bmaj=2.129 mas, bpa=-7.827 degrees
! Estimated noise=0.258815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267098 Jy
! Component: 100  -  total flux cleaned = 0.00026615 Jy
! Component: 150  -  total flux cleaned = 0.000245352 Jy
! Component: 200  -  total flux cleaned = 0.000225974 Jy
! Total flux subtracted in 200 components = 0.000225974 Jy
! Clean residual min=-0.001326 max=0.001300 Jy/beam
! Clean residual mean=-0.000001 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.211136 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 145 components and 0.211136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076428Jy  sigma=1.333888
! Fit after  self-cal, rms=0.076429Jy  sigma=1.333874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.89415e-05 Jy
! Component: 100  -  total flux cleaned = 3.88084e-05 Jy
! Component: 150  -  total flux cleaned = 2.08752e-05 Jy
! Component: 200  -  total flux cleaned = 2.11502e-05 Jy
! Total flux subtracted in 200 components = 2.11502e-05 Jy
! Clean residual min=-0.001301 max=0.001310 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.211157 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 156 components and 0.211157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076419Jy  sigma=1.333737
! Fit after  self-cal, rms=0.076419Jy  sigma=1.333730
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076419Jy  sigma=1.333730
! Fit after  self-cal, rms=0.076443Jy  sigma=1.333714
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.332 mas, bmaj=6.57 mas, bpa=-3.463 degrees
! Estimated noise=0.33174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167767 Jy
! Component: 100  -  total flux cleaned = 0.000154616 Jy
! Component: 150  -  total flux cleaned = 0.000126029 Jy
! Component: 200  -  total flux cleaned = 0.000100076 Jy
! Total flux subtracted in 200 components = 0.000100076 Jy
! Clean residual min=-0.001465 max=0.001332 Jy/beam
! Clean residual mean=-0.000001 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.211257 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 165 components and 0.211257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076442Jy  sigma=1.333743
! Fit after  self-cal, rms=0.076441Jy  sigma=1.333722
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110218 Jy
! Component: 100  -  total flux cleaned = 0.000123604 Jy
! Component: 150  -  total flux cleaned = 0.000112895 Jy
! Component: 200  -  total flux cleaned = 0.000103224 Jy
! Total flux subtracted in 200 components = 0.000103224 Jy
! Clean residual min=-0.001461 max=0.001281 Jy/beam
! Clean residual mean=-0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.21136 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 169 components and 0.21136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076442Jy  sigma=1.333759
! Fit after  self-cal, rms=0.076442Jy  sigma=1.333751
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8099 mas, bmaj=2.13 mas, bpa=-7.816 degrees
! Estimated noise=0.258833 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8099 x 2.13 at -7.816 degrees (North through East)
! Clean map  min=-0.0019691  max=0.14287 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5983 mas, bmaj=1.681 mas, bpa=-8.287 degrees
! Estimated noise=0.519508 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112414 Jy
! Component: 100  -  total flux cleaned = 0.139207 Jy
! Component: 150  -  total flux cleaned = 0.153764 Jy
! Component: 200  -  total flux cleaned = 0.163646 Jy
! Total flux subtracted in 200 components = 0.163646 Jy
! Clean residual min=-0.003560 max=0.005530 Jy/beam
! Clean residual mean=-0.000003 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.163646 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.163646 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8099 mas, bmaj=2.13 mas, bpa=-7.816 degrees
! Estimated noise=0.258833 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136826 Jy
! Component: 100  -  total flux cleaned = 0.0220438 Jy
! Component: 150  -  total flux cleaned = 0.027602 Jy
! Component: 200  -  total flux cleaned = 0.031508 Jy
! Total flux subtracted in 200 components = 0.031508 Jy
! Clean residual min=-0.001926 max=0.002249 Jy/beam
! Clean residual mean=-0.000005 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.195154 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 73 components and 0.195154 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.332 mas, bmaj=6.57 mas, bpa=-3.463 degrees
! Estimated noise=0.33174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00485153 Jy
! Component: 100  -  total flux cleaned = 0.00786371 Jy
! Component: 150  -  total flux cleaned = 0.00991944 Jy
! Component: 200  -  total flux cleaned = 0.0114217 Jy
! Total flux subtracted in 200 components = 0.0114217 Jy
! Clean residual min=-0.001582 max=0.001379 Jy/beam
! Clean residual mean=-0.000003 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.206576 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112071 Jy
! Component: 100  -  total flux cleaned = 0.00196936 Jy
! Component: 150  -  total flux cleaned = 0.0026212 Jy
! Component: 200  -  total flux cleaned = 0.00287762 Jy
! Total flux subtracted in 200 components = 0.00287762 Jy
! Clean residual min=-0.001512 max=0.001356 Jy/beam
! Clean residual mean=-0.000002 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.209454 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 162 components and 0.209454 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8099 mas, bmaj=2.13 mas, bpa=-7.816 degrees
! Estimated noise=0.258833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472712 Jy
! Component: 100  -  total flux cleaned = 0.000817007 Jy
! Component: 150  -  total flux cleaned = 0.000817482 Jy
! Component: 200  -  total flux cleaned = 0.000784878 Jy
! Total flux subtracted in 200 components = 0.000784878 Jy
! Clean residual min=-0.001563 max=0.001427 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.210239 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 179 components and 0.210239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076481Jy  sigma=1.334495
! Fit after  self-cal, rms=0.076459Jy  sigma=1.334257
wmodel /J1324-3235_X_map.mod
! wmodel: Unable to open new model file: /J1324-3235_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1324-3235_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8099 x 2.13 at -7.816 degrees (North through East)
! Clean map  min=-0.0013691  max=0.14385 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1324-3235_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.143845 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000338235 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.705415 0.705415 1.41083 2.82166 5.64332 11.2866 22.5733 45.1466 90.2931
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  425.281 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1324-3235_X_dfm.log closed on Thu May 19 23:21:25 2016