! Started logfile: /scr/pima/bg219i_uvs/J1324-3235_S_dfm.log on Thu May 19 23:21:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1324-3235_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1324-3235_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J1324-3235
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1324-3235_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.033098Jy  sigma=18.104393
! Fit after  self-cal, rms=0.823925Jy  sigma=14.534885
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.439 mas, bmaj=6.478 mas, bpa=-8.654 degrees
! Estimated noise=0.841376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126461 Jy
! Component: 100  -  total flux cleaned = 0.173457 Jy
! Total flux subtracted in 100 components = 0.173457 Jy
! Clean residual min=-0.008302 max=0.021573 Jy/beam
! Clean residual mean=0.000027 rms=0.002650 Jy/beam
! Combined flux in latest and established models = 0.173457 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.173457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097093Jy  sigma=1.634596
! Fit after  self-cal, rms=0.096883Jy  sigma=1.631385
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235767 Jy
! Component: 100  -  total flux cleaned = 0.0372387 Jy
! Total flux subtracted in 100 components = 0.0372387 Jy
! Clean residual min=-0.007506 max=0.015676 Jy/beam
! Clean residual mean=0.000016 rms=0.001796 Jy/beam
! Combined flux in latest and established models = 0.210695 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 0.210696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087083Jy  sigma=1.447640
! Fit after  self-cal, rms=0.087036Jy  sigma=1.447061
! Inverting map 
! Added new window around map position (-4, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014321 Jy
! Component: 100  -  total flux cleaned = 0.0228593 Jy
! Total flux subtracted in 100 components = 0.0228593 Jy
! Clean residual min=-0.006145 max=0.008768 Jy/beam
! Clean residual mean=0.000009 rms=0.001363 Jy/beam
! Combined flux in latest and established models = 0.233555 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.233555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083259Jy  sigma=1.380347
! Fit after  self-cal, rms=0.083067Jy  sigma=1.377093
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=8.047 mas, bpa=-8.717 degrees
! Estimated noise=0.467753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105364 Jy
! Component: 100  -  total flux cleaned = 0.0162178 Jy
! Component: 150  -  total flux cleaned = 0.0195051 Jy
! Component: 200  -  total flux cleaned = 0.0214465 Jy
! Total flux subtracted in 200 components = 0.0214465 Jy
! Clean residual min=-0.003324 max=0.004214 Jy/beam
! Clean residual mean=0.000006 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.255001 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 59 components and 0.255001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081705Jy  sigma=1.353439
! Fit after  self-cal, rms=0.081627Jy  sigma=1.352149
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.036 x 8.047 at -8.717 degrees (North through East)
! Clean map  min=-0.0030521  max=0.14842 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.15     KP        1.00     
!   LA        0.97     MK        0.88     NL        0.99     OV        0.99     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.19     KP        0.99     
!   LA        1.00     MK        1.03     NL        0.99     OV        0.97     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.17     KP        1.00     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.19     KP        1.01     
!   LA        0.99     MK        1.07     NL        1.03     OV        1.03     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.081627Jy  sigma=1.352149
! Fit after  self-cal, rms=0.081769Jy  sigma=1.344279
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=8.027 mas, bpa=-8.647 degrees
! Estimated noise=0.469828 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107918 Jy
! Component: 100  -  total flux cleaned = 0.000984274 Jy
! Component: 150  -  total flux cleaned = 0.000985751 Jy
! Component: 200  -  total flux cleaned = 0.0010225 Jy
! Total flux subtracted in 200 components = 0.0010225 Jy
! Clean residual min=-0.003281 max=0.002890 Jy/beam
! Clean residual mean=0.000012 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.256024 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 69 components and 0.256024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081710Jy  sigma=1.343351
! Fit after  self-cal, rms=0.081724Jy  sigma=1.343234
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081724Jy  sigma=1.343234
! Fit after  self-cal, rms=0.082116Jy  sigma=1.338848
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=8.04 mas, bpa=-8.488 degrees
! Estimated noise=0.472589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800282 Jy
! Component: 100  -  total flux cleaned = 0.000834869 Jy
! Component: 150  -  total flux cleaned = 0.000868464 Jy
! Component: 200  -  total flux cleaned = 0.000899856 Jy
! Total flux subtracted in 200 components = 0.000899856 Jy
! Clean residual min=-0.003089 max=0.002576 Jy/beam
! Clean residual mean=0.000005 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.256924 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 77 components and 0.256924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082078Jy  sigma=1.338284
! Fit after  self-cal, rms=0.082087Jy  sigma=1.338220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.95781e-05 Jy
! Component: 100  -  total flux cleaned = 8.78758e-05 Jy
! Component: 150  -  total flux cleaned = 0.000113681 Jy
! Component: 200  -  total flux cleaned = 0.000113094 Jy
! Total flux subtracted in 200 components = 0.000113094 Jy
! Clean residual min=-0.003025 max=0.002520 Jy/beam
! Clean residual mean=0.000005 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.257037 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 79 components and 0.257037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082068Jy  sigma=1.337913
! Fit after  self-cal, rms=0.082067Jy  sigma=1.337897
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082067Jy  sigma=1.337897
! Fit after  self-cal, rms=0.082559Jy  sigma=1.337767
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.057 mas, bmaj=8.053 mas, bpa=-8.301 degrees
! Estimated noise=0.475296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000484232 Jy
! Component: 100  -  total flux cleaned = 0.000575714 Jy
! Component: 150  -  total flux cleaned = 0.000602876 Jy
! Component: 200  -  total flux cleaned = 0.000650772 Jy
! Total flux subtracted in 200 components = 0.000650772 Jy
! Clean residual min=-0.003005 max=0.002502 Jy/beam
! Clean residual mean=0.000006 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.257687 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 0.257687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082536Jy  sigma=1.337440
! Fit after  self-cal, rms=0.082535Jy  sigma=1.337421
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.59165e-05 Jy
! Component: 100  -  total flux cleaned = -2.81752e-06 Jy
! Component: 150  -  total flux cleaned = 1.80457e-05 Jy
! Component: 200  -  total flux cleaned = 3.79614e-05 Jy
! Total flux subtracted in 200 components = 3.79614e-05 Jy
! Clean residual min=-0.002944 max=0.002456 Jy/beam
! Clean residual mean=0.000006 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.257725 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 89 components and 0.257725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082525Jy  sigma=1.337238
! Fit after  self-cal, rms=0.082524Jy  sigma=1.337226
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082524Jy  sigma=1.337226
! Fit after  self-cal, rms=0.082994Jy  sigma=1.337128
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.15 mas, bmaj=22.14 mas, bpa=-3.932 degrees
! Estimated noise=0.618569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612407 Jy
! Component: 100  -  total flux cleaned = 0.00065464 Jy
! Component: 150  -  total flux cleaned = 0.000672044 Jy
! Component: 200  -  total flux cleaned = 0.000673185 Jy
! Total flux subtracted in 200 components = 0.000673185 Jy
! Clean residual min=-0.002071 max=0.001958 Jy/beam
! Clean residual mean=0.000012 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.258399 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 95 components and 0.258399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082986Jy  sigma=1.336978
! Fit after  self-cal, rms=0.082985Jy  sigma=1.336952
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.31997e-06 Jy
! Component: 100  -  total flux cleaned = 2.55554e-05 Jy
! Component: 150  -  total flux cleaned = 4.20508e-05 Jy
! Component: 200  -  total flux cleaned = 4.26851e-05 Jy
! Total flux subtracted in 200 components = 4.26851e-05 Jy
! Clean residual min=-0.002073 max=0.001941 Jy/beam
! Clean residual mean=0.000013 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.258441 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 96 components and 0.258441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082981Jy  sigma=1.336860
! Fit after  self-cal, rms=0.082980Jy  sigma=1.336837
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=8.066 mas, bpa=-8.132 degrees
! Estimated noise=0.477932 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.066 x 8.066 at -8.132 degrees (North through East)
! Clean map  min=-0.0028016  max=0.15388 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.451 mas, bmaj=6.481 mas, bpa=-7.895 degrees
! Estimated noise=0.86957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129744 Jy
! Component: 100  -  total flux cleaned = 0.176757 Jy
! Component: 150  -  total flux cleaned = 0.201389 Jy
! Component: 200  -  total flux cleaned = 0.217084 Jy
! Total flux subtracted in 200 components = 0.217084 Jy
! Clean residual min=-0.005631 max=0.008848 Jy/beam
! Clean residual mean=0.000014 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.217084 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.217084 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=8.066 mas, bpa=-8.132 degrees
! Estimated noise=0.477932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179778 Jy
! Component: 100  -  total flux cleaned = 0.0277732 Jy
! Component: 150  -  total flux cleaned = 0.0334598 Jy
! Component: 200  -  total flux cleaned = 0.0368184 Jy
! Total flux subtracted in 200 components = 0.0368184 Jy
! Clean residual min=-0.002723 max=0.003004 Jy/beam
! Clean residual mean=0.000006 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.253902 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 76 components and 0.253902 Jy
! Inverting map 
! Added new window around map position (-9.5, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224013 Jy
! Component: 100  -  total flux cleaned = 0.00303112 Jy
! Component: 150  -  total flux cleaned = 0.00332168 Jy
! Component: 200  -  total flux cleaned = 0.00342486 Jy
! Total flux subtracted in 200 components = 0.00342486 Jy
! Clean residual min=-0.002418 max=0.002565 Jy/beam
! Clean residual mean=0.000006 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.257327 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.257327 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.15 mas, bmaj=22.14 mas, bpa=-3.932 degrees
! Estimated noise=0.618569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127636 Jy
! Component: 100  -  total flux cleaned = 0.00155987 Jy
! Component: 150  -  total flux cleaned = 0.00162814 Jy
! Component: 200  -  total flux cleaned = 0.00166823 Jy
! Total flux subtracted in 200 components = 0.00166823 Jy
! Clean residual min=-0.001941 max=0.001998 Jy/beam
! Clean residual mean=0.000013 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.258995 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.83377e-05 Jy
! Component: 100  -  total flux cleaned = 5.2203e-05 Jy
! Component: 150  -  total flux cleaned = 6.82846e-05 Jy
! Component: 200  -  total flux cleaned = 8.23479e-05 Jy
! Total flux subtracted in 200 components = 8.23479e-05 Jy
! Clean residual min=-0.001968 max=0.002003 Jy/beam
! Clean residual mean=0.000013 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.259077 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 112 components and 0.259077 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=8.066 mas, bpa=-8.132 degrees
! Estimated noise=0.477932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000881591 Jy
! Component: 100  -  total flux cleaned = -0.000977366 Jy
! Component: 150  -  total flux cleaned = -0.000975864 Jy
! Component: 200  -  total flux cleaned = -0.000937472 Jy
! Total flux subtracted in 200 components = -0.000937472 Jy
! Clean residual min=-0.002371 max=0.002359 Jy/beam
! Clean residual mean=0.000006 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.25814 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 121 components and 0.25814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082930Jy  sigma=1.335734
! Fit after  self-cal, rms=0.082922Jy  sigma=1.335572
wmodel /J1324-3235_S_map.mod
! wmodel: Unable to open new model file: /J1324-3235_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1324-3235_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.066 x 8.066 at -8.132 degrees (North through East)
! Clean map  min=-0.0022805  max=0.15735 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1324-3235_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.157349 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000595291 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13497 1.13497 2.26995 4.53989 9.07978 18.1596 36.3191 72.6383
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  264.323 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1324-3235_S_dfm.log closed on Thu May 19 23:21:21 2016