! Started logfile: /scr/pima/bg219i_uvs/J1316-3338_X_uvs.log on Wed Apr  6 23:44:29 2016
obs /scr/pima/bg219i_uvs/J1316-3338_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1316-3338_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! AN table 2: 7 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.865714 visibilities/baseline/integration-bin.
! Found source: J1316-3338
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 7272 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1316-3338_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.174854Jy  sigma=26.350013
! Fit after  self-cal, rms=0.392376Jy  sigma=8.550737
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6553 mas, bmaj=1.9 mas, bpa=2.036 degrees
! Estimated noise=0.687876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.46974 Jy
! Component: 100  -  total flux cleaned = 0.573633 Jy
! Total flux subtracted in 100 components = 0.573633 Jy
! Clean residual min=-0.026133 max=0.039406 Jy/beam
! Clean residual mean=0.000015 rms=0.004852 Jy/beam
! Combined flux in latest and established models = 0.573633 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.573633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.129747Jy  sigma=2.881775
! Fit after  self-cal, rms=0.129737Jy  sigma=2.881544
! Inverting map 
! Added new window around map position (-1.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0416318 Jy
! Component: 100  -  total flux cleaned = 0.0691511 Jy
! Total flux subtracted in 100 components = 0.0691511 Jy
! Clean residual min=-0.019228 max=0.026477 Jy/beam
! Clean residual mean=0.000006 rms=0.003685 Jy/beam
! Combined flux in latest and established models = 0.642784 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.642784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.105810Jy  sigma=2.274895
! Fit after  self-cal, rms=0.104980Jy  sigma=2.255595
! Inverting map 
! Added new window around map position (0.8, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251785 Jy
! Component: 100  -  total flux cleaned = 0.0423306 Jy
! Total flux subtracted in 100 components = 0.0423306 Jy
! Clean residual min=-0.013440 max=0.017515 Jy/beam
! Clean residual mean=0.000003 rms=0.002951 Jy/beam
! Combined flux in latest and established models = 0.685115 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.685115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.094933Jy  sigma=2.000961
! Fit after  self-cal, rms=0.094689Jy  sigma=1.994953
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8542 mas, bmaj=2.281 mas, bpa=1.509 degrees
! Estimated noise=0.502446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258501 Jy
! Component: 100  -  total flux cleaned = 0.041359 Jy
! Component: 150  -  total flux cleaned = 0.0519744 Jy
! Component: 200  -  total flux cleaned = 0.0596341 Jy
! Total flux subtracted in 200 components = 0.0596341 Jy
! Clean residual min=-0.011209 max=0.013799 Jy/beam
! Clean residual mean=0.000021 rms=0.002810 Jy/beam
! Combined flux in latest and established models = 0.744749 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 63 components and 0.744749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.087168Jy  sigma=1.787782
! Fit after  self-cal, rms=0.086814Jy  sigma=1.777333
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8542 x 2.281 at 1.509 degrees (North through East)
! Clean map  min=-0.010152  max=0.59789 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        1.00     LA        0.98     
!   MK        1.01     NL        1.08     OV        0.97     PT        0.97     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        0.97     LA        1.00     
!   MK        1.02     NL        1.07     OV        0.95     PT        0.96     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     KP        1.00     LA        0.99     
!   MK        1.01     NL        1.07     OV        0.94     PT        0.97     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     HN        1.14     KP        1.00     LA        0.99     
!   NL        0.97     OV        0.93     PT        1.15     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        1.00     LA        0.99     
!   MK        1.01     NL        1.07     OV        0.94     PT        0.96     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     KP        0.99     LA        1.00     
!   MK        1.01     NL        1.08     OV        0.95     PT        0.97     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     KP        0.98     LA        1.00     
!   MK        1.00     NL        1.07     OV        0.93     PT        0.99     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        0.99     LA        0.99     
!   MK        1.00     NL        1.06     OV        0.94     PT        0.96     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.086814Jy  sigma=1.777333
! Fit after  self-cal, rms=0.083568Jy  sigma=1.675179
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8584 mas, bmaj=2.291 mas, bpa=1.63 degrees
! Estimated noise=0.500025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107078 Jy
! Component: 100  -  total flux cleaned = 0.0100327 Jy
! Component: 150  -  total flux cleaned = 0.0100286 Jy
! Component: 200  -  total flux cleaned = 0.00987447 Jy
! Total flux subtracted in 200 components = 0.00987447 Jy
! Clean residual min=-0.007317 max=0.009821 Jy/beam
! Clean residual mean=0.000018 rms=0.001933 Jy/beam
! Combined flux in latest and established models = 0.754623 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 100 components and 0.754623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081655Jy  sigma=1.635696
! Fit after  self-cal, rms=0.081618Jy  sigma=1.632926
! Inverting map 
! Added new window around map position (-7.4, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947375 Jy
! Component: 100  -  total flux cleaned = 0.01459 Jy
! Component: 150  -  total flux cleaned = 0.0171395 Jy
! Component: 200  -  total flux cleaned = 0.0187042 Jy
! Total flux subtracted in 200 components = 0.0187042 Jy
! Clean residual min=-0.006495 max=0.007042 Jy/beam
! Clean residual mean=0.000015 rms=0.001697 Jy/beam
! Combined flux in latest and established models = 0.773327 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 132 components and 0.773327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080301Jy  sigma=1.601491
! Fit after  self-cal, rms=0.080200Jy  sigma=1.599080
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080200Jy  sigma=1.599080
! Fit after  self-cal, rms=0.079135Jy  sigma=1.568813
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=2.293 mas, bpa=1.641 degrees
! Estimated noise=0.498418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000286426 Jy
! Component: 100  -  total flux cleaned = 0.000753447 Jy
! Component: 150  -  total flux cleaned = 0.00130042 Jy
! Component: 200  -  total flux cleaned = 0.00149246 Jy
! Total flux subtracted in 200 components = 0.00149246 Jy
! Clean residual min=-0.005162 max=0.005603 Jy/beam
! Clean residual mean=0.000010 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 0.77482 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 150 components and 0.77482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078735Jy  sigma=1.560749
! Fit after  self-cal, rms=0.078744Jy  sigma=1.560405
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000767942 Jy
! Component: 100  -  total flux cleaned = 0.00101568 Jy
! Component: 150  -  total flux cleaned = 0.0010925 Jy
! Component: 200  -  total flux cleaned = 0.00109412 Jy
! Total flux subtracted in 200 components = 0.00109412 Jy
! Clean residual min=-0.005030 max=0.005574 Jy/beam
! Clean residual mean=0.000010 rms=0.001336 Jy/beam
! Combined flux in latest and established models = 0.775914 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 160 components and 0.775914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078584Jy  sigma=1.556979
! Fit after  self-cal, rms=0.078583Jy  sigma=1.556857
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078583Jy  sigma=1.556857
! Fit after  self-cal, rms=0.078144Jy  sigma=1.544750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8602 mas, bmaj=2.295 mas, bpa=1.622 degrees
! Estimated noise=0.497156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186881 Jy
! Component: 100  -  total flux cleaned = -0.00223891 Jy
! Component: 150  -  total flux cleaned = -0.00216713 Jy
! Component: 200  -  total flux cleaned = -0.0020327 Jy
! Total flux subtracted in 200 components = -0.0020327 Jy
! Clean residual min=-0.004801 max=0.006331 Jy/beam
! Clean residual mean=0.000012 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 0.773881 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 171 components and 0.773881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077935Jy  sigma=1.541262
! Fit after  self-cal, rms=0.077934Jy  sigma=1.541144
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-43.4, -19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588257 Jy
! Component: 100  -  total flux cleaned = 0.00654022 Jy
! Component: 150  -  total flux cleaned = 0.00708475 Jy
! Component: 200  -  total flux cleaned = 0.00796442 Jy
! Total flux subtracted in 200 components = 0.00796442 Jy
! Clean residual min=-0.004182 max=0.004873 Jy/beam
! Clean residual mean=0.000011 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.781845 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 196 components and 0.781846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077359Jy  sigma=1.531214
! Fit after  self-cal, rms=0.077338Jy  sigma=1.530277
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077338Jy  sigma=1.530277
! Fit after  self-cal, rms=0.075548Jy  sigma=1.481048
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.357 mas, bmaj=6.935 mas, bpa=1.71 degrees
! Estimated noise=0.631362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126571 Jy
! Component: 100  -  total flux cleaned = 0.00135195 Jy
! Component: 150  -  total flux cleaned = 0.00128794 Jy
! Component: 200  -  total flux cleaned = 0.000973963 Jy
! Total flux subtracted in 200 components = 0.000973963 Jy
! Clean residual min=-0.004247 max=0.004521 Jy/beam
! Clean residual mean=0.000011 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.782819 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 217 components and 0.782819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075457Jy  sigma=1.479633
! Fit after  self-cal, rms=0.075474Jy  sigma=1.479427
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128573 Jy
! Component: 100  -  total flux cleaned = -7.6558e-05 Jy
! Component: 150  -  total flux cleaned = -0.000255404 Jy
! Component: 200  -  total flux cleaned = -0.000355053 Jy
! Total flux subtracted in 200 components = -0.000355053 Jy
! Clean residual min=-0.004258 max=0.004379 Jy/beam
! Clean residual mean=0.000012 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.782464 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 227 components and 0.782464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075468Jy  sigma=1.479346
! Fit after  self-cal, rms=0.075464Jy  sigma=1.479318
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8605 mas, bmaj=2.295 mas, bpa=1.641 degrees
! Estimated noise=0.497113 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8605 x 2.295 at 1.641 degrees (North through East)
! Clean map  min=-0.0061118  max=0.5952 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075464Jy  sigma=1.479318
! Fit after  self-cal, rms=0.071132Jy  sigma=1.376454
! Inverting map and beam 
! Estimated beam: bmin=0.8605 mas, bmaj=2.295 mas, bpa=1.695 degrees
! Estimated noise=0.4938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00364362 Jy
! Component: 100  -  total flux cleaned = -0.00478575 Jy
! Component: 150  -  total flux cleaned = -0.00522213 Jy
! Component: 200  -  total flux cleaned = -0.00528941 Jy
! Total flux subtracted in 200 components = -0.00528941 Jy
! Clean residual min=-0.003567 max=0.003461 Jy/beam
! Clean residual mean=0.000007 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.777175 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 242 components and 0.777175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070822Jy  sigma=1.372199
! Fit after  self-cal, rms=0.070820Jy  sigma=1.372089
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144637 Jy
! Component: 100  -  total flux cleaned = -0.000145138 Jy
! Component: 150  -  total flux cleaned = -0.000145398 Jy
! Component: 200  -  total flux cleaned = -0.000145111 Jy
! Total flux subtracted in 200 components = -0.000145111 Jy
! Clean residual min=-0.003439 max=0.003377 Jy/beam
! Clean residual mean=0.000007 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.77703 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 257 components and 0.77703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070727Jy  sigma=1.370620
! Fit after  self-cal, rms=0.070726Jy  sigma=1.370565
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070726Jy  sigma=1.370565
! Fit after  self-cal, rms=0.070500Jy  sigma=1.367913
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6586 mas, bmaj=1.905 mas, bpa=2.284 degrees
! Estimated noise=0.67909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.463542 Jy
! Component: 100  -  total flux cleaned = 0.567012 Jy
! Component: 150  -  total flux cleaned = 0.610937 Jy
! Component: 200  -  total flux cleaned = 0.638755 Jy
! Total flux subtracted in 200 components = 0.638755 Jy
! Clean residual min=-0.009837 max=0.015190 Jy/beam
! Clean residual mean=0.000004 rms=0.002286 Jy/beam
! Combined flux in latest and established models = 0.638755 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.638755 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8609 mas, bmaj=2.295 mas, bpa=1.731 degrees
! Estimated noise=0.49158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304583 Jy
! Component: 100  -  total flux cleaned = 0.0498434 Jy
! Component: 150  -  total flux cleaned = 0.0635288 Jy
! Component: 200  -  total flux cleaned = 0.0742703 Jy
! Total flux subtracted in 200 components = 0.0742703 Jy
! Clean residual min=-0.005424 max=0.007487 Jy/beam
! Clean residual mean=0.000009 rms=0.001682 Jy/beam
! Combined flux in latest and established models = 0.713026 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 71 components and 0.713025 Jy
! Inverting map 
! Added new window around map position (-0.8, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00899607 Jy
! Component: 100  -  total flux cleaned = 0.0164974 Jy
! Component: 150  -  total flux cleaned = 0.0228988 Jy
! Component: 200  -  total flux cleaned = 0.0284039 Jy
! Total flux subtracted in 200 components = 0.0284039 Jy
! Clean residual min=-0.004215 max=0.004800 Jy/beam
! Clean residual mean=0.000008 rms=0.001184 Jy/beam
! Combined flux in latest and established models = 0.741429 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 112 components and 0.741429 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.36 mas, bmaj=6.946 mas, bpa=1.756 degrees
! Estimated noise=0.623627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00779938 Jy
! Component: 100  -  total flux cleaned = 0.0136612 Jy
! Component: 150  -  total flux cleaned = 0.0182271 Jy
! Component: 200  -  total flux cleaned = 0.0218266 Jy
! Total flux subtracted in 200 components = 0.0218266 Jy
! Clean residual min=-0.004647 max=0.004462 Jy/beam
! Clean residual mean=0.000013 rms=0.001298 Jy/beam
! Combined flux in latest and established models = 0.763256 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285498 Jy
! Component: 100  -  total flux cleaned = 0.00512172 Jy
! Component: 150  -  total flux cleaned = 0.00672833 Jy
! Component: 200  -  total flux cleaned = 0.00758115 Jy
! Total flux subtracted in 200 components = 0.00758115 Jy
! Clean residual min=-0.004345 max=0.004014 Jy/beam
! Clean residual mean=0.000012 rms=0.001186 Jy/beam
! Combined flux in latest and established models = 0.770837 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 162 components and 0.770837 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8609 mas, bmaj=2.295 mas, bpa=1.731 degrees
! Estimated noise=0.49158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794046 Jy
! Component: 100  -  total flux cleaned = 0.000949651 Jy
! Component: 150  -  total flux cleaned = 0.000946988 Jy
! Component: 200  -  total flux cleaned = 0.00107568 Jy
! Total flux subtracted in 200 components = 0.00107568 Jy
! Clean residual min=-0.003332 max=0.003628 Jy/beam
! Clean residual mean=0.000005 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.771913 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 182 components and 0.771913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.070416Jy  sigma=1.369581
! Fit after  self-cal, rms=0.070378Jy  sigma=1.368724
wmodel /scr/pima/bg219i_uvs/J1316-3338_X_map.mod
! Writing 182 model components to file: /scr/pima/bg219i_uvs/J1316-3338_X_map.mod
wobs /scr/pima/bg219i_uvs/J1316-3338_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1316-3338_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1316-3338_X_map.win
! wwins: Wrote 8 windows to /scr/pima/bg219i_uvs/J1316-3338_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.001 Jy
! Component: 100  -  total flux cleaned = 0.00185198 Jy
! Component: 150  -  total flux cleaned = 0.00248617 Jy
! Component: 200  -  total flux cleaned = 0.0027081 Jy
! Component: 250  -  total flux cleaned = 0.00292206 Jy
! Component: 300  -  total flux cleaned = 0.00297225 Jy
! Component: 350  -  total flux cleaned = 0.00312301 Jy
! Component: 400  -  total flux cleaned = 0.00327094 Jy
! Component: 450  -  total flux cleaned = 0.00341585 Jy
! Component: 500  -  total flux cleaned = 0.003653 Jy
! Component: 550  -  total flux cleaned = 0.00388475 Jy
! Component: 600  -  total flux cleaned = 0.00411071 Jy
! Component: 650  -  total flux cleaned = 0.00424345 Jy
! Component: 700  -  total flux cleaned = 0.00441659 Jy
! Component: 750  -  total flux cleaned = 0.00450201 Jy
! Component: 800  -  total flux cleaned = 0.00462837 Jy
! Component: 850  -  total flux cleaned = 0.00466956 Jy
! Component: 900  -  total flux cleaned = 0.00470986 Jy
! Component: 950  -  total flux cleaned = 0.0048294 Jy
! Component: 1000  -  total flux cleaned = 0.00502616 Jy
! Component: 1050  -  total flux cleaned = 0.00529655 Jy
! Component: 1100  -  total flux cleaned = 0.00529667 Jy
! Component: 1150  -  total flux cleaned = 0.00556036 Jy
! Component: 1200  -  total flux cleaned = 0.00567218 Jy
! Component: 1250  -  total flux cleaned = 0.00585506 Jy
! Component: 1300  -  total flux cleaned = 0.00607101 Jy
! Component: 1350  -  total flux cleaned = 0.00624828 Jy
! Component: 1400  -  total flux cleaned = 0.00645915 Jy
! Component: 1450  -  total flux cleaned = 0.00680522 Jy
! Component: 1500  -  total flux cleaned = 0.00694142 Jy
! Component: 1550  -  total flux cleaned = 0.00717792 Jy
! Component: 1600  -  total flux cleaned = 0.00741176 Jy
! Component: 1650  -  total flux cleaned = 0.00757617 Jy
! Component: 1700  -  total flux cleaned = 0.00773863 Jy
! Component: 1750  -  total flux cleaned = 0.0080603 Jy
! Component: 1800  -  total flux cleaned = 0.0083466 Jy
! Component: 1850  -  total flux cleaned = 0.00850359 Jy
! Component: 1900  -  total flux cleaned = 0.00881456 Jy
! Component: 1950  -  total flux cleaned = 0.00890665 Jy
! Component: 2000  -  total flux cleaned = 0.00927155 Jy
! Component: 2050  -  total flux cleaned = 0.00945261 Jy
! Component: 2100  -  total flux cleaned = 0.00960154 Jy
! Component: 2150  -  total flux cleaned = 0.00989592 Jy
! Component: 2200  -  total flux cleaned = 0.0101584 Jy
! Component: 2250  -  total flux cleaned = 0.0101293 Jy
! Component: 2300  -  total flux cleaned = 0.010444 Jy
! Component: 2350  -  total flux cleaned = 0.0106135 Jy
! Component: 2400  -  total flux cleaned = 0.0106692 Jy
! Component: 2450  -  total flux cleaned = 0.0108636 Jy
! Component: 2500  -  total flux cleaned = 0.0110286 Jy
! Component: 2550  -  total flux cleaned = 0.0111097 Jy
! Component: 2600  -  total flux cleaned = 0.0112445 Jy
! Component: 2650  -  total flux cleaned = 0.0115118 Jy
! Component: 2700  -  total flux cleaned = 0.0115384 Jy
! Component: 2750  -  total flux cleaned = 0.0117747 Jy
! Component: 2800  -  total flux cleaned = 0.0119563 Jy
! Component: 2850  -  total flux cleaned = 0.0120332 Jy
! Component: 2900  -  total flux cleaned = 0.0121866 Jy
! Component: 2950  -  total flux cleaned = 0.0123888 Jy
! Component: 3000  -  total flux cleaned = 0.0124893 Jy
! Component: 3050  -  total flux cleaned = 0.0126634 Jy
! Component: 3100  -  total flux cleaned = 0.0127864 Jy
! Component: 3150  -  total flux cleaned = 0.0129815 Jy
! Component: 3200  -  total flux cleaned = 0.0131023 Jy
! Component: 3250  -  total flux cleaned = 0.0131977 Jy
! Component: 3300  -  total flux cleaned = 0.0133403 Jy
! Component: 3350  -  total flux cleaned = 0.013364 Jy
! Component: 3400  -  total flux cleaned = 0.0135043 Jy
! Component: 3450  -  total flux cleaned = 0.0136663 Jy
! Component: 3500  -  total flux cleaned = 0.0136893 Jy
! Component: 3550  -  total flux cleaned = 0.0138487 Jy
! Component: 3600  -  total flux cleaned = 0.0139162 Jy
! Component: 3650  -  total flux cleaned = 0.0139833 Jy
! Component: 3700  -  total flux cleaned = 0.0140723 Jy
! Component: 3750  -  total flux cleaned = 0.0141825 Jy
! Component: 3800  -  total flux cleaned = 0.0142043 Jy
! Component: 3850  -  total flux cleaned = 0.0142694 Jy
! Component: 3900  -  total flux cleaned = 0.0143557 Jy
! Component: 3950  -  total flux cleaned = 0.0143557 Jy
! Component: 4000  -  total flux cleaned = 0.0144197 Jy
! Component: 4050  -  total flux cleaned = 0.0145252 Jy
! Total flux subtracted in 4096 components = 0.0146089 Jy
! Clean residual min=-0.001195 max=0.001257 Jy/beam
! Clean residual mean=0.000005 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.786522 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 463 components and 0.786522 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1316-3338_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8609 x 2.295 at 1.731 degrees (North through East)
! Clean map  min=-0.0022484  max=0.5949 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1316-3338_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.594904 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000362764 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.182936 0.182936 0.365872 0.731743 1.46349 2.92697 5.85395 11.7079 23.4158 46.8316 93.6631
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.594 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1639.92 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1316-3338_X_uvs.log closed on Wed Apr  6 23:44:34 2016