! Started logfile: /scr/pima/bg219i_uvs/J1316-3338_S_dfm.log on Thu May 19 23:20:46 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1316-3338_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1316-3338_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! AN table 2: 7 integrations on 28 of 28 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1316-3338
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1316-3338_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.127248Jy  sigma=22.469127
! Fit after  self-cal, rms=0.598402Jy  sigma=12.124558
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.455 mas, bmaj=6.85 mas, bpa=0.5136 degrees
! Estimated noise=0.839506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.2927 Jy
! Component: 100  -  total flux cleaned = 0.404029 Jy
! Total flux subtracted in 100 components = 0.404029 Jy
! Clean residual min=-0.028520 max=0.053789 Jy/beam
! Clean residual mean=-0.000248 rms=0.005956 Jy/beam
! Combined flux in latest and established models = 0.404029 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.404029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.253081Jy  sigma=3.397791
! Fit after  self-cal, rms=0.252896Jy  sigma=3.393823
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0626164 Jy
! Component: 100  -  total flux cleaned = 0.100482 Jy
! Total flux subtracted in 100 components = 0.100482 Jy
! Clean residual min=-0.017967 max=0.033070 Jy/beam
! Clean residual mean=-0.000142 rms=0.004020 Jy/beam
! Combined flux in latest and established models = 0.504511 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.504511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218602Jy  sigma=2.427023
! Fit after  self-cal, rms=0.218496Jy  sigma=2.424792
! Inverting map 
! Added new window around map position (-5, 6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344123 Jy
! Component: 100  -  total flux cleaned = 0.0584673 Jy
! Total flux subtracted in 100 components = 0.0584673 Jy
! Clean residual min=-0.014480 max=0.023782 Jy/beam
! Clean residual mean=-0.000089 rms=0.003198 Jy/beam
! Combined flux in latest and established models = 0.562979 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.562979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205234Jy  sigma=2.032955
! Fit after  self-cal, rms=0.204598Jy  sigma=2.011617
! Inverting map 
! Added new window around map position (-5.5, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229067 Jy
! Component: 100  -  total flux cleaned = 0.0386539 Jy
! Total flux subtracted in 100 components = 0.0386539 Jy
! Clean residual min=-0.010915 max=0.017931 Jy/beam
! Clean residual mean=-0.000055 rms=0.002575 Jy/beam
! Combined flux in latest and established models = 0.601633 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 64 components and 0.601633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198066Jy  sigma=1.807360
! Fit after  self-cal, rms=0.197685Jy  sigma=1.793294
! Inverting map 
! Added new window around map position (3.5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168447 Jy
! Component: 100  -  total flux cleaned = 0.0287215 Jy
! Total flux subtracted in 100 components = 0.0287215 Jy
! Clean residual min=-0.009035 max=0.010843 Jy/beam
! Clean residual mean=-0.000030 rms=0.002155 Jy/beam
! Combined flux in latest and established models = 0.630354 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 89 components and 0.630354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193935Jy  sigma=1.678802
! Fit after  self-cal, rms=0.193841Jy  sigma=1.674790
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.026 mas, bmaj=8.356 mas, bpa=-0.332 degrees
! Estimated noise=0.680986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.5, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190982 Jy
! Component: 100  -  total flux cleaned = 0.0316168 Jy
! Component: 150  -  total flux cleaned = 0.0406304 Jy
! Component: 200  -  total flux cleaned = 0.0473363 Jy
! Total flux subtracted in 200 components = 0.0473363 Jy
! Clean residual min=-0.007107 max=0.008447 Jy/beam
! Clean residual mean=-0.000010 rms=0.001832 Jy/beam
! Combined flux in latest and established models = 0.677691 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 144 components and 0.677691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.190130Jy  sigma=1.574679
! Fit after  self-cal, rms=0.190004Jy  sigma=1.568467
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.026 x 8.356 at -0.332 degrees (North through East)
! Clean map  min=-0.0067162  max=0.39242 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     KP        0.97     LA        0.99     
!   MK        1.01     NL        1.09     OV        0.98     PT        0.98     
!   SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     HN        1.06     KP        0.99     LA        1.00     
!   NL        1.00     OV        0.97     PT        1.08     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     KP        0.98     LA        0.98     
!   MK        1.01     NL        1.07     OV        0.99     PT        0.97     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     HN        1.10     KP        0.96     LA        0.97     
!   NL        0.97     OV        0.97     PT        1.08     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     KP        0.97     LA        0.99     
!   MK        1.03     NL        1.04     OV        0.99     PT        0.99     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     HN        1.11     KP        0.97     LA        0.99     
!   NL        0.97     OV        0.96     PT        1.07     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     KP        0.99     LA        0.99     
!   MK        1.02     NL        1.09     OV        0.99     PT        0.98     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     HN        1.13     KP        0.98     LA        0.99     
!   NL        0.97     OV        0.96     PT        1.06     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.190004Jy  sigma=1.568467
! Fit after  self-cal, rms=0.186024Jy  sigma=1.514868
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=8.379 mas, bpa=-0.1309 degrees
! Estimated noise=0.683243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305427 Jy
! Component: 100  -  total flux cleaned = 0.00353809 Jy
! Component: 150  -  total flux cleaned = 0.0041094 Jy
! Component: 200  -  total flux cleaned = 0.00435024 Jy
! Total flux subtracted in 200 components = 0.00435024 Jy
! Clean residual min=-0.004879 max=0.004651 Jy/beam
! Clean residual mean=0.000045 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.682041 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 168 components and 0.682041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185685Jy  sigma=1.508938
! Fit after  self-cal, rms=0.185675Jy  sigma=1.507861
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185675Jy  sigma=1.507861
! Fit after  self-cal, rms=0.185698Jy  sigma=1.507551
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.041 mas, bmaj=8.382 mas, bpa=-0.09172 degrees
! Estimated noise=0.683705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.27112e-05 Jy
! Component: 100  -  total flux cleaned = 0.000361597 Jy
! Component: 150  -  total flux cleaned = 0.000649124 Jy
! Component: 200  -  total flux cleaned = 0.000775096 Jy
! Total flux subtracted in 200 components = 0.000775096 Jy
! Clean residual min=-0.004749 max=0.004642 Jy/beam
! Clean residual mean=0.000048 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.682816 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 180 components and 0.682816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185552Jy  sigma=1.504936
! Fit after  self-cal, rms=0.185540Jy  sigma=1.504439
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163697 Jy
! Component: 100  -  total flux cleaned = 0.000357827 Jy
! Component: 150  -  total flux cleaned = 0.000415945 Jy
! Component: 200  -  total flux cleaned = 0.00051841 Jy
! Total flux subtracted in 200 components = 0.00051841 Jy
! Clean residual min=-0.004782 max=0.004676 Jy/beam
! Clean residual mean=0.000048 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.683334 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 192 components and 0.683334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185456Jy  sigma=1.502878
! Fit after  self-cal, rms=0.185449Jy  sigma=1.502591
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185449Jy  sigma=1.502591
! Fit after  self-cal, rms=0.185343Jy  sigma=1.491595
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=8.361 mas, bpa=-0.05697 degrees
! Estimated noise=0.684759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811139 Jy
! Component: 100  -  total flux cleaned = 0.00117501 Jy
! Component: 150  -  total flux cleaned = 0.00132571 Jy
! Component: 200  -  total flux cleaned = 0.00137235 Jy
! Total flux subtracted in 200 components = 0.00137235 Jy
! Clean residual min=-0.004544 max=0.004225 Jy/beam
! Clean residual mean=0.000055 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.684707 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 208 components and 0.684707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185220Jy  sigma=1.490434
! Fit after  self-cal, rms=0.185219Jy  sigma=1.490268
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.55222e-05 Jy
! Component: 100  -  total flux cleaned = 0.000185008 Jy
! Component: 150  -  total flux cleaned = 0.000222761 Jy
! Component: 200  -  total flux cleaned = 0.000222229 Jy
! Total flux subtracted in 200 components = 0.000222229 Jy
! Clean residual min=-0.004554 max=0.004255 Jy/beam
! Clean residual mean=0.000056 rms=0.001133 Jy/beam
! Combined flux in latest and established models = 0.684929 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 221 components and 0.684929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185175Jy  sigma=1.489538
! Fit after  self-cal, rms=0.185171Jy  sigma=1.489436
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185171Jy  sigma=1.489436
! Fit after  self-cal, rms=0.185228Jy  sigma=1.489095
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.062 mas, bmaj=22.63 mas, bpa=1.358 degrees
! Estimated noise=0.916304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139699 Jy
! Component: 100  -  total flux cleaned = 0.00159321 Jy
! Component: 150  -  total flux cleaned = 0.00179087 Jy
! Component: 200  -  total flux cleaned = 0.00174698 Jy
! Total flux subtracted in 200 components = 0.00174698 Jy
! Clean residual min=-0.005776 max=0.004709 Jy/beam
! Clean residual mean=0.000114 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.686676 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 234 components and 0.686676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185097Jy  sigma=1.488939
! Fit after  self-cal, rms=0.185090Jy  sigma=1.488720
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.3644e-05 Jy
! Component: 100  -  total flux cleaned = 2.38271e-06 Jy
! Component: 150  -  total flux cleaned = 2.72898e-06 Jy
! Component: 200  -  total flux cleaned = -3.30641e-05 Jy
! Total flux subtracted in 200 components = -3.30641e-05 Jy
! Clean residual min=-0.005836 max=0.004696 Jy/beam
! Clean residual mean=0.000114 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.686643 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 242 components and 0.686643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185066Jy  sigma=1.488551
! Fit after  self-cal, rms=0.185062Jy  sigma=1.488446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.034 mas, bmaj=8.349 mas, bpa=-0.03276 degrees
! Estimated noise=0.686018 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.034 x 8.349 at -0.03276 degrees (North through East)
! Clean map  min=-0.0046904  max=0.39618 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.455 mas, bmaj=6.831 mas, bpa=0.8186 degrees
! Estimated noise=0.849668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.296192 Jy
! Component: 100  -  total flux cleaned = 0.409075 Jy
! Component: 150  -  total flux cleaned = 0.475885 Jy
! Component: 200  -  total flux cleaned = 0.519863 Jy
! Total flux subtracted in 200 components = 0.519863 Jy
! Clean residual min=-0.012733 max=0.024482 Jy/beam
! Clean residual mean=-0.000122 rms=0.003329 Jy/beam
! Combined flux in latest and established models = 0.519863 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.519863 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.034 mas, bmaj=8.349 mas, bpa=-0.03276 degrees
! Estimated noise=0.686018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0558513 Jy
! Component: 100  -  total flux cleaned = 0.0891671 Jy
! Component: 150  -  total flux cleaned = 0.11123 Jy
! Component: 200  -  total flux cleaned = 0.126825 Jy
! Total flux subtracted in 200 components = 0.126825 Jy
! Clean residual min=-0.006257 max=0.008742 Jy/beam
! Clean residual mean=-0.000027 rms=0.001749 Jy/beam
! Combined flux in latest and established models = 0.646688 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 108 components and 0.646688 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112087 Jy
! Component: 100  -  total flux cleaned = 0.019356 Jy
! Component: 150  -  total flux cleaned = 0.025361 Jy
! Component: 200  -  total flux cleaned = 0.0298167 Jy
! Total flux subtracted in 200 components = 0.0298167 Jy
! Clean residual min=-0.004568 max=0.004373 Jy/beam
! Clean residual mean=0.000036 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.676505 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 149 components and 0.676505 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.062 mas, bmaj=22.63 mas, bpa=1.358 degrees
! Estimated noise=0.916304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558495 Jy
! Component: 100  -  total flux cleaned = 0.00775427 Jy
! Component: 150  -  total flux cleaned = 0.00832608 Jy
! Component: 200  -  total flux cleaned = 0.0087121 Jy
! Total flux subtracted in 200 components = 0.0087121 Jy
! Clean residual min=-0.005749 max=0.004515 Jy/beam
! Clean residual mean=0.000109 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 0.685217 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019649 Jy
! Component: 100  -  total flux cleaned = 0.000370439 Jy
! Component: 150  -  total flux cleaned = 0.000474018 Jy
! Component: 200  -  total flux cleaned = 0.000518376 Jy
! Total flux subtracted in 200 components = 0.000518376 Jy
! Clean residual min=-0.005862 max=0.004569 Jy/beam
! Clean residual mean=0.000112 rms=0.001609 Jy/beam
! Combined flux in latest and established models = 0.685735 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 176 components and 0.685735 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.034 mas, bmaj=8.349 mas, bpa=-0.03276 degrees
! Estimated noise=0.686018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000745767 Jy
! Component: 100  -  total flux cleaned = 0.000824527 Jy
! Component: 150  -  total flux cleaned = 0.000889316 Jy
! Component: 200  -  total flux cleaned = 0.000947232 Jy
! Total flux subtracted in 200 components = 0.000947232 Jy
! Clean residual min=-0.004503 max=0.004204 Jy/beam
! Clean residual mean=0.000058 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.686682 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 194 components and 0.686682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185166Jy  sigma=1.490742
! Fit after  self-cal, rms=0.185127Jy  sigma=1.489902
wmodel /J1316-3338_S_map.mod
! wmodel: Unable to open new model file: /J1316-3338_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1316-3338_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.034 x 8.349 at -0.03276 degrees (North through East)
! Clean map  min=-0.0044507  max=0.39819 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1316-3338_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.39819 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00113278 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.853443 0.853443 1.70689 3.41377 6.82754 13.6551 27.3102 54.6203
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.398 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  351.517 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1316-3338_S_dfm.log closed on Thu May 19 23:20:49 2016