! Started logfile: /scr/pima/bg219i_uvs/J1305-3132_X_dfm.log on Thu May 19 23:20:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1305-3132_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1305-3132_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.822222 visibilities/baseline/integration-bin.
! Found source: J1305-3132
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1305-3132_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013379Jy  sigma=20.127459
! Fit after  self-cal, rms=0.819591Jy  sigma=16.233850
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5911 mas, bmaj=1.683 mas, bpa=-7.596 degrees
! Estimated noise=0.589016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135293 Jy
! Component: 100  -  total flux cleaned = 0.16511 Jy
! Total flux subtracted in 100 components = 0.16511 Jy
! Clean residual min=-0.005856 max=0.011444 Jy/beam
! Clean residual mean=-0.000019 rms=0.001554 Jy/beam
! Combined flux in latest and established models = 0.16511 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.16511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079677Jy  sigma=1.495210
! Fit after  self-cal, rms=0.079660Jy  sigma=1.495029
! Inverting map 
! Added new window around map position (-0.8, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122166 Jy
! Component: 100  -  total flux cleaned = 0.0193975 Jy
! Total flux subtracted in 100 components = 0.0193975 Jy
! Clean residual min=-0.005474 max=0.008467 Jy/beam
! Clean residual mean=-0.000012 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 0.184508 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.184508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076423Jy  sigma=1.416513
! Fit after  self-cal, rms=0.076371Jy  sigma=1.414683
! Inverting map 
! Added new window around map position (0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00828429 Jy
! Component: 100  -  total flux cleaned = 0.0129376 Jy
! Total flux subtracted in 100 components = 0.0129376 Jy
! Clean residual min=-0.004534 max=0.004938 Jy/beam
! Clean residual mean=-0.000008 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.197445 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.197445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075102Jy  sigma=1.383977
! Fit after  self-cal, rms=0.075063Jy  sigma=1.382878
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8113 mas, bmaj=2.179 mas, bpa=-6.034 degrees
! Estimated noise=0.232787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618456 Jy
! Component: 100  -  total flux cleaned = 0.00938703 Jy
! Component: 150  -  total flux cleaned = 0.0111011 Jy
! Component: 200  -  total flux cleaned = 0.0119826 Jy
! Total flux subtracted in 200 components = 0.0119826 Jy
! Clean residual min=-0.002738 max=0.002524 Jy/beam
! Clean residual mean=0.000004 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.209428 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 40 components and 0.209428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074659Jy  sigma=1.371135
! Fit after  self-cal, rms=0.074639Jy  sigma=1.370576
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8113 x 2.179 at -6.034 degrees (North through East)
! Clean map  min=-0.0024642  max=0.17457 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.09     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.10     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.02     OV        0.98     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.11     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.02     OV        0.96     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.05     KP        0.99     
!   LA        0.98     MK        0.97     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.09     KP        0.97     
!   LA        1.01     MK        1.01     NL        1.02     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.13     KP        1.00     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.96     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.09     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.00     OV        0.97     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        1.01     
!   LA        1.01     MK        0.99     NL        0.98     OV        0.97     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.09     KP        0.98     
!   LA        1.00     MK        0.98     NL        0.99     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.06     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.96     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.18     KP        0.99     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.07     KP        0.94     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.96     
!   PT        1.04     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.074639Jy  sigma=1.370576
! Fit after  self-cal, rms=0.075321Jy  sigma=1.364873
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8118 mas, bmaj=2.177 mas, bpa=-5.965 degrees
! Estimated noise=0.232254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153234 Jy
! Component: 100  -  total flux cleaned = -0.00166183 Jy
! Component: 150  -  total flux cleaned = -0.0017358 Jy
! Component: 200  -  total flux cleaned = -0.00177867 Jy
! Total flux subtracted in 200 components = -0.00177867 Jy
! Clean residual min=-0.002152 max=0.001934 Jy/beam
! Clean residual mean=0.000004 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.207649 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 52 components and 0.207649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075279Jy  sigma=1.364276
! Fit after  self-cal, rms=0.075302Jy  sigma=1.364131
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075302Jy  sigma=1.364131
! Fit after  self-cal, rms=0.075989Jy  sigma=1.357491
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8127 mas, bmaj=2.179 mas, bpa=-6.039 degrees
! Estimated noise=0.232267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000993617 Jy
! Component: 100  -  total flux cleaned = -0.00103863 Jy
! Component: 150  -  total flux cleaned = -0.00103885 Jy
! Component: 200  -  total flux cleaned = -0.00105526 Jy
! Total flux subtracted in 200 components = -0.00105526 Jy
! Clean residual min=-0.001374 max=0.001581 Jy/beam
! Clean residual mean=-0.000001 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.206594 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.206594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075971Jy  sigma=1.357185
! Fit after  self-cal, rms=0.075995Jy  sigma=1.357084
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116064 Jy
! Component: 100  -  total flux cleaned = 0.00101956 Jy
! Component: 150  -  total flux cleaned = 0.000997295 Jy
! Component: 200  -  total flux cleaned = 0.000978324 Jy
! Total flux subtracted in 200 components = 0.000978324 Jy
! Clean residual min=-0.001370 max=0.001326 Jy/beam
! Clean residual mean=-0.000000 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.207572 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 79 components and 0.207572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075963Jy  sigma=1.356553
! Fit after  self-cal, rms=0.075961Jy  sigma=1.356484
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075961Jy  sigma=1.356484
! Fit after  self-cal, rms=0.075941Jy  sigma=1.356431
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8124 mas, bmaj=2.179 mas, bpa=-6.073 degrees
! Estimated noise=0.232028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150173 Jy
! Component: 100  -  total flux cleaned = -0.000221315 Jy
! Component: 150  -  total flux cleaned = -0.000235984 Jy
! Component: 200  -  total flux cleaned = -0.00026474 Jy
! Total flux subtracted in 200 components = -0.00026474 Jy
! Clean residual min=-0.001316 max=0.001243 Jy/beam
! Clean residual mean=-0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.207307 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 89 components and 0.207307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075930Jy  sigma=1.356280
! Fit after  self-cal, rms=0.075930Jy  sigma=1.356259
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.55695e-06 Jy
! Component: 100  -  total flux cleaned = 2.13652e-05 Jy
! Component: 150  -  total flux cleaned = 8.14497e-06 Jy
! Component: 200  -  total flux cleaned = -2.91358e-05 Jy
! Total flux subtracted in 200 components = -2.91358e-05 Jy
! Clean residual min=-0.001299 max=0.001250 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.207278 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.207278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075924Jy  sigma=1.356181
! Fit after  self-cal, rms=0.075924Jy  sigma=1.356172
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075924Jy  sigma=1.356172
! Fit after  self-cal, rms=0.075908Jy  sigma=1.356146
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.356 mas, bmaj=6.969 mas, bpa=-1.622 degrees
! Estimated noise=0.296006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218389 Jy
! Component: 100  -  total flux cleaned = -0.000238545 Jy
! Component: 150  -  total flux cleaned = -0.000246933 Jy
! Component: 200  -  total flux cleaned = -0.000271811 Jy
! Total flux subtracted in 200 components = -0.000271811 Jy
! Clean residual min=-0.001080 max=0.001116 Jy/beam
! Clean residual mean=-0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.207006 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 103 components and 0.207006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075905Jy  sigma=1.356096
! Fit after  self-cal, rms=0.075905Jy  sigma=1.356094
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.54312e-05 Jy
! Component: 100  -  total flux cleaned = -3.00873e-05 Jy
! Component: 150  -  total flux cleaned = -4.44551e-05 Jy
! Component: 200  -  total flux cleaned = -6.45697e-05 Jy
! Total flux subtracted in 200 components = -6.45697e-05 Jy
! Clean residual min=-0.001073 max=0.001112 Jy/beam
! Clean residual mean=-0.000000 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.206942 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 105 components and 0.206942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075904Jy  sigma=1.356082
! Fit after  self-cal, rms=0.075904Jy  sigma=1.356083
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=2.18 mas, bpa=-6.078 degrees
! Estimated noise=0.231846 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8125 x 2.18 at -6.078 degrees (North through East)
! Clean map  min=-0.001286  max=0.17514 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5915 mas, bmaj=1.682 mas, bpa=-7.589 degrees
! Estimated noise=0.589245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.135119 Jy
! Component: 100  -  total flux cleaned = 0.165559 Jy
! Component: 150  -  total flux cleaned = 0.178828 Jy
! Component: 200  -  total flux cleaned = 0.187243 Jy
! Total flux subtracted in 200 components = 0.187243 Jy
! Clean residual min=-0.004538 max=0.005436 Jy/beam
! Clean residual mean=-0.000011 rms=0.001112 Jy/beam
! Combined flux in latest and established models = 0.187243 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.187243 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=2.18 mas, bpa=-6.078 degrees
! Estimated noise=0.231846 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00977765 Jy
! Component: 100  -  total flux cleaned = 0.0143538 Jy
! Component: 150  -  total flux cleaned = 0.0169946 Jy
! Component: 200  -  total flux cleaned = 0.0186521 Jy
! Total flux subtracted in 200 components = 0.0186521 Jy
! Clean residual min=-0.001375 max=0.001283 Jy/beam
! Clean residual mean=-0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.205895 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 38 components and 0.205895 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.356 mas, bmaj=6.969 mas, bpa=-1.622 degrees
! Estimated noise=0.296006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130747 Jy
! Component: 100  -  total flux cleaned = 0.00151409 Jy
! Component: 150  -  total flux cleaned = 0.00153263 Jy
! Component: 200  -  total flux cleaned = 0.00150327 Jy
! Total flux subtracted in 200 components = 0.00150327 Jy
! Clean residual min=-0.001135 max=0.001139 Jy/beam
! Clean residual mean=-0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.207398 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.22894e-05 Jy
! Component: 100  -  total flux cleaned = -8.79714e-05 Jy
! Component: 150  -  total flux cleaned = -0.000132587 Jy
! Component: 200  -  total flux cleaned = -0.000163455 Jy
! Total flux subtracted in 200 components = -0.000163455 Jy
! Clean residual min=-0.001113 max=0.001113 Jy/beam
! Clean residual mean=-0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.207235 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 65 components and 0.207235 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8125 mas, bmaj=2.18 mas, bpa=-6.078 degrees
! Estimated noise=0.231846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.89179e-05 Jy
! Component: 100  -  total flux cleaned = -6.48989e-05 Jy
! Component: 150  -  total flux cleaned = -0.000160109 Jy
! Component: 200  -  total flux cleaned = -0.000245282 Jy
! Total flux subtracted in 200 components = -0.000245282 Jy
! Clean residual min=-0.001161 max=0.001224 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.206989 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 75 components and 0.206989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075920Jy  sigma=1.356315
! Fit after  self-cal, rms=0.075907Jy  sigma=1.356199
wmodel /J1305-3132_X_map.mod
! wmodel: Unable to open new model file: /J1305-3132_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1305-3132_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8125 x 2.18 at -6.078 degrees (North through East)
! Clean map  min=-0.0011072  max=0.17688 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1305-3132_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.176877 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000285492 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.48422 0.48422 0.96844 1.93688 3.87376 7.74752 15.495 30.9901 61.9801
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.176 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  619.553 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1305-3132_X_dfm.log closed on Thu May 19 23:20:37 2016