! Started logfile: /scr/pima/bg219i_uvs/J1302+5748_X_dfm.log on Thu May 19 23:20:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1302+5748_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1302+5748_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.860317 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3252 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1302+5748_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.068148Jy  sigma=21.481364
! Fit after  self-cal, rms=0.668603Jy  sigma=13.241235
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6595 mas, bmaj=2.698 mas, bpa=38.68 degrees
! Estimated noise=1.01722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.261955 Jy
! Component: 100  -  total flux cleaned = 0.319079 Jy
! Total flux subtracted in 100 components = 0.319079 Jy
! Clean residual min=-0.008447 max=0.015932 Jy/beam
! Clean residual mean=0.000002 rms=0.002233 Jy/beam
! Combined flux in latest and established models = 0.319079 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.319079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076924Jy  sigma=1.420931
! Fit after  self-cal, rms=0.076917Jy  sigma=1.420864
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147965 Jy
! Component: 100  -  total flux cleaned = 0.0218556 Jy
! Total flux subtracted in 100 components = 0.0218556 Jy
! Clean residual min=-0.007039 max=0.006922 Jy/beam
! Clean residual mean=-0.000005 rms=0.001657 Jy/beam
! Combined flux in latest and established models = 0.340934 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.340934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074345Jy  sigma=1.332251
! Fit after  self-cal, rms=0.074341Jy  sigma=1.332149
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8282 mas, bmaj=2.551 mas, bpa=37.79 degrees
! Estimated noise=0.706563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569934 Jy
! Component: 100  -  total flux cleaned = 0.00931186 Jy
! Component: 150  -  total flux cleaned = 0.0103947 Jy
! Component: 200  -  total flux cleaned = 0.0106686 Jy
! Total flux subtracted in 200 components = 0.0106686 Jy
! Clean residual min=-0.006291 max=0.007196 Jy/beam
! Clean residual mean=-0.000028 rms=0.001524 Jy/beam
! Combined flux in latest and established models = 0.351603 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.351603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073949Jy  sigma=1.317415
! Fit after  self-cal, rms=0.073946Jy  sigma=1.317278
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8282 x 2.551 at 37.79 degrees (North through East)
! Clean map  min=-0.0058111  max=0.33908 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.97     KP        0.98     
!   LA        0.95     MK        1.00     NL        0.99     OV        0.98     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.02     KP        0.96     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.98     
!   PT        1.10     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.98     KP        1.02     
!   LA        0.99     MK        1.04     NL        1.00     OV        0.94     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.04     KP        0.99     
!   LA        0.96     MK        0.98     NL        0.97     OV        0.97     
!   PT        1.09     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.96     MK        1.04     NL        1.00     OV        0.98     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        1.01     
!   LA        0.92     MK        1.07     NL        1.00     OV        0.94     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.97     MK        0.96     NL        1.00     OV        0.96     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.95     KP        1.01     
!   LA        0.94     MK        1.03     NL        0.99     OV        0.96     
!   PT        1.12     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.09     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.97     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.03     OV        0.99     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.03     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.99     OV        1.00     
!   PT        1.08     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.01     KP        1.04     
!   LA        0.96     MK        1.02     NL        0.97     OV        0.95     
!   PT        1.05     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.073946Jy  sigma=1.317278
! Fit after  self-cal, rms=0.073023Jy  sigma=1.277185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8307 mas, bmaj=2.555 mas, bpa=37.81 degrees
! Estimated noise=0.702046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-32.6, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00330445 Jy
! Component: 100  -  total flux cleaned = 0.00319506 Jy
! Component: 150  -  total flux cleaned = 0.00311605 Jy
! Component: 200  -  total flux cleaned = 0.00297285 Jy
! Total flux subtracted in 200 components = 0.00297285 Jy
! Clean residual min=-0.004633 max=0.004072 Jy/beam
! Clean residual mean=-0.000003 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.354576 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 0.354576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072480Jy  sigma=1.270445
! Fit after  self-cal, rms=0.072520Jy  sigma=1.270075
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072520Jy  sigma=1.270075
! Fit after  self-cal, rms=0.072437Jy  sigma=1.269608
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.832 mas, bmaj=2.554 mas, bpa=37.8 degrees
! Estimated noise=0.700536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000599545 Jy
! Component: 100  -  total flux cleaned = -0.000531478 Jy
! Component: 150  -  total flux cleaned = -0.000582761 Jy
! Component: 200  -  total flux cleaned = -0.000680231 Jy
! Total flux subtracted in 200 components = -0.000680231 Jy
! Clean residual min=-0.004110 max=0.003967 Jy/beam
! Clean residual mean=-0.000001 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.353896 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 58 components and 0.353896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072302Jy  sigma=1.268487
! Fit after  self-cal, rms=0.072303Jy  sigma=1.268407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153391 Jy
! Component: 100  -  total flux cleaned = -0.000154084 Jy
! Component: 150  -  total flux cleaned = -0.000112834 Jy
! Component: 200  -  total flux cleaned = -3.7191e-05 Jy
! Total flux subtracted in 200 components = -3.7191e-05 Jy
! Clean residual min=-0.003849 max=0.003925 Jy/beam
! Clean residual mean=-0.000001 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.353859 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 71 components and 0.353859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072237Jy  sigma=1.267941
! Fit after  self-cal, rms=0.072238Jy  sigma=1.267919
! Inverting map 
! Added new window around map position (0, 32.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193843 Jy
! Component: 100  -  total flux cleaned = 0.00228413 Jy
! Component: 150  -  total flux cleaned = 0.00250119 Jy
! Component: 200  -  total flux cleaned = 0.00273843 Jy
! Total flux subtracted in 200 components = 0.00273843 Jy
! Clean residual min=-0.002788 max=0.003478 Jy/beam
! Clean residual mean=-0.000003 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.356597 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 98 components and 0.356597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071950Jy  sigma=1.263881
! Fit after  self-cal, rms=0.071946Jy  sigma=1.263653
! Inverting map 
! Added new window around map position (35.8, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289767 Jy
! Component: 100  -  total flux cleaned = 0.00375355 Jy
! Component: 150  -  total flux cleaned = 0.00420521 Jy
! Component: 200  -  total flux cleaned = 0.00476779 Jy
! Total flux subtracted in 200 components = 0.00476779 Jy
! Clean residual min=-0.002732 max=0.002749 Jy/beam
! Clean residual mean=-0.000007 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.361365 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 121 components and 0.361365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071752Jy  sigma=1.261373
! Fit after  self-cal, rms=0.071751Jy  sigma=1.261280
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071751Jy  sigma=1.261280
! Fit after  self-cal, rms=0.071591Jy  sigma=1.260424
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8325 mas, bmaj=2.551 mas, bpa=37.81 degrees
! Estimated noise=0.698634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100716 Jy
! Component: 100  -  total flux cleaned = 0.00142905 Jy
! Component: 150  -  total flux cleaned = 0.00181301 Jy
! Component: 200  -  total flux cleaned = 0.00203362 Jy
! Total flux subtracted in 200 components = 0.00203362 Jy
! Clean residual min=-0.002665 max=0.002648 Jy/beam
! Clean residual mean=-0.000003 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.363399 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 136 components and 0.363399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071499Jy  sigma=1.259545
! Fit after  self-cal, rms=0.071502Jy  sigma=1.259510
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000215365 Jy
! Component: 100  -  total flux cleaned = 0.000419217 Jy
! Component: 150  -  total flux cleaned = 0.000611296 Jy
! Component: 200  -  total flux cleaned = 0.000757867 Jy
! Total flux subtracted in 200 components = 0.000757867 Jy
! Clean residual min=-0.002630 max=0.002546 Jy/beam
! Clean residual mean=-0.000004 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.364157 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 147 components and 0.364157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071449Jy  sigma=1.258974
! Fit after  self-cal, rms=0.071450Jy  sigma=1.258962
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071450Jy  sigma=1.258962
! Fit after  self-cal, rms=0.071410Jy  sigma=1.258799
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.947 mas, bmaj=2.794 mas, bpa=34.31 degrees
! Estimated noise=0.906463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049427 Jy
! Component: 100  -  total flux cleaned = 0.000881923 Jy
! Component: 150  -  total flux cleaned = 0.00105768 Jy
! Component: 200  -  total flux cleaned = 0.00105717 Jy
! Total flux subtracted in 200 components = 0.00105717 Jy
! Clean residual min=-0.002454 max=0.002888 Jy/beam
! Clean residual mean=-0.000007 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.365214 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 164 components and 0.365214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071363Jy  sigma=1.258766
! Fit after  self-cal, rms=0.071361Jy  sigma=1.258706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151188 Jy
! Component: 100  -  total flux cleaned = 0.000117886 Jy
! Component: 150  -  total flux cleaned = 0.000150079 Jy
! Component: 200  -  total flux cleaned = 0.000149941 Jy
! Total flux subtracted in 200 components = 0.000149941 Jy
! Clean residual min=-0.002406 max=0.002771 Jy/beam
! Clean residual mean=-0.000007 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.365364 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 171 components and 0.365364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071344Jy  sigma=1.258805
! Fit after  self-cal, rms=0.071343Jy  sigma=1.258782
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8325 mas, bmaj=2.55 mas, bpa=37.82 degrees
! Estimated noise=0.697985 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8325 x 2.55 at 37.82 degrees (North through East)
! Clean map  min=-0.0037413  max=0.33685 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6622 mas, bmaj=2.696 mas, bpa=38.72 degrees
! Estimated noise=1.00519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.258814 Jy
! Component: 100  -  total flux cleaned = 0.315252 Jy
! Component: 150  -  total flux cleaned = 0.329581 Jy
! Component: 200  -  total flux cleaned = 0.335009 Jy
! Total flux subtracted in 200 components = 0.335009 Jy
! Clean residual min=-0.005687 max=0.005884 Jy/beam
! Clean residual mean=0.000007 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.335009 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.335009 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8325 mas, bmaj=2.55 mas, bpa=37.82 degrees
! Estimated noise=0.697985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613042 Jy
! Component: 100  -  total flux cleaned = 0.0100979 Jy
! Component: 150  -  total flux cleaned = 0.0126149 Jy
! Component: 200  -  total flux cleaned = 0.0142329 Jy
! Total flux subtracted in 200 components = 0.0142329 Jy
! Clean residual min=-0.004761 max=0.004223 Jy/beam
! Clean residual mean=0.000011 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.349242 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.349242 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.947 mas, bmaj=2.794 mas, bpa=34.31 degrees
! Estimated noise=0.906463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00299104 Jy
! Component: 100  -  total flux cleaned = 0.00497693 Jy
! Component: 150  -  total flux cleaned = 0.00676553 Jy
! Component: 200  -  total flux cleaned = 0.0079821 Jy
! Total flux subtracted in 200 components = 0.0079821 Jy
! Clean residual min=-0.003524 max=0.004455 Jy/beam
! Clean residual mean=0.000007 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.357224 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.4, -21.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319503 Jy
! Component: 100  -  total flux cleaned = 0.00458459 Jy
! Component: 150  -  total flux cleaned = 0.00559659 Jy
! Component: 200  -  total flux cleaned = 0.00661776 Jy
! Total flux subtracted in 200 components = 0.00661776 Jy
! Clean residual min=-0.002404 max=0.002702 Jy/beam
! Clean residual mean=0.000008 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.363842 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 109 components and 0.363842 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8325 mas, bmaj=2.55 mas, bpa=37.82 degrees
! Estimated noise=0.697985 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107508 Jy
! Component: 100  -  total flux cleaned = 0.00169494 Jy
! Component: 150  -  total flux cleaned = 0.00176573 Jy
! Component: 200  -  total flux cleaned = 0.00216163 Jy
! Total flux subtracted in 200 components = 0.00216163 Jy
! Clean residual min=-0.002563 max=0.002620 Jy/beam
! Clean residual mean=0.000003 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.366004 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 136 components and 0.366004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071516Jy  sigma=1.260725
! Fit after  self-cal, rms=0.071482Jy  sigma=1.260033
wmodel /J1302+5748_X_map.mod
! wmodel: Unable to open new model file: /J1302+5748_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1302+5748_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8325 x 2.55 at 37.82 degrees (North through East)
! Clean map  min=-0.0027238  max=0.33528 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1302+5748_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.335278 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000606201 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.542417 0.542417 1.08483 2.16967 4.33934 8.67867 17.3573 34.7147 69.4294
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.335 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  553.079 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1302+5748_X_dfm.log closed on Thu May 19 23:20:29 2016