! Started logfile: /scr/pima/bg219i_uvs/J1203+4803_X_dfm.log on Thu May 19 23:19:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1203+4803_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1203+4803_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.826984 visibilities/baseline/integration-bin.
! Found source: J1203+4803
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12504 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1203+4803_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.136369Jy  sigma=23.542971
! Fit after  self-cal, rms=0.470908Jy  sigma=9.484115
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=1.045 mas, bpa=17.63 degrees
! Estimated noise=0.627476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.399795 Jy
! Component: 100  -  total flux cleaned = 0.515525 Jy
! Total flux subtracted in 100 components = 0.515525 Jy
! Clean residual min=-0.018343 max=0.046665 Jy/beam
! Clean residual mean=-0.000021 rms=0.004274 Jy/beam
! Combined flux in latest and established models = 0.515526 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.515526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108612Jy  sigma=2.219961
! Fit after  self-cal, rms=0.108564Jy  sigma=2.218986
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0478279 Jy
! Component: 100  -  total flux cleaned = 0.0684819 Jy
! Total flux subtracted in 100 components = 0.0684819 Jy
! Clean residual min=-0.011297 max=0.021832 Jy/beam
! Clean residual mean=-0.000017 rms=0.002455 Jy/beam
! Combined flux in latest and established models = 0.584008 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.584008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086242Jy  sigma=1.643424
! Fit after  self-cal, rms=0.086198Jy  sigma=1.642470
! Inverting map 
! Added new window around map position (0.8, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184833 Jy
! Component: 100  -  total flux cleaned = 0.0282715 Jy
! Total flux subtracted in 100 components = 0.0282715 Jy
! Clean residual min=-0.010048 max=0.011585 Jy/beam
! Clean residual mean=-0.000016 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 0.612279 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.612279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082382Jy  sigma=1.537669
! Fit after  self-cal, rms=0.082071Jy  sigma=1.530101
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=1.313 mas, bpa=6.464 degrees
! Estimated noise=0.344108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00858903 Jy
! Component: 100  -  total flux cleaned = 0.0131084 Jy
! Component: 150  -  total flux cleaned = 0.0159479 Jy
! Component: 200  -  total flux cleaned = 0.0177753 Jy
! Total flux subtracted in 200 components = 0.0177753 Jy
! Clean residual min=-0.007682 max=0.010330 Jy/beam
! Clean residual mean=-0.000047 rms=0.002213 Jy/beam
! Combined flux in latest and established models = 0.630054 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.630054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081526Jy  sigma=1.503004
! Fit after  self-cal, rms=0.081448Jy  sigma=1.501087
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.094 x 1.313 at 6.464 degrees (North through East)
! Clean map  min=-0.0073489  max=0.53836 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.98     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.96     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.01     NL        0.98     OV        0.98     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.97     MK        0.99     NL        0.98     OV        0.98     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.01     NL        0.97     OV        0.97     
!   PT        1.07     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     MK        0.98     NL        0.98     OV        0.97     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.98     OV        0.96     
!   PT        1.06     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        0.98     
!   LA        0.99     MK        1.01     NL        0.98     OV        0.97     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.96     
!   PT        1.05     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.081448Jy  sigma=1.501087
! Fit after  self-cal, rms=0.079083Jy  sigma=1.456552
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.1 mas, bmaj=1.319 mas, bpa=6.068 degrees
! Estimated noise=0.342864 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00255305 Jy
! Component: 100  -  total flux cleaned = -0.00280586 Jy
! Component: 150  -  total flux cleaned = -0.00299632 Jy
! Component: 200  -  total flux cleaned = -0.003094 Jy
! Total flux subtracted in 200 components = -0.003094 Jy
! Clean residual min=-0.007161 max=0.007635 Jy/beam
! Clean residual mean=-0.000068 rms=0.001936 Jy/beam
! Combined flux in latest and established models = 0.62696 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.62696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078763Jy  sigma=1.454980
! Fit after  self-cal, rms=0.078777Jy  sigma=1.454658
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078777Jy  sigma=1.454658
! Fit after  self-cal, rms=0.076840Jy  sigma=1.417071
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.104 mas, bmaj=1.325 mas, bpa=6.211 degrees
! Estimated noise=0.339928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0056374 Jy
! Component: 100  -  total flux cleaned = -0.00852832 Jy
! Component: 150  -  total flux cleaned = -0.0102179 Jy
! Component: 200  -  total flux cleaned = -0.0109391 Jy
! Total flux subtracted in 200 components = -0.0109391 Jy
! Clean residual min=-0.005221 max=0.007571 Jy/beam
! Clean residual mean=-0.000022 rms=0.001566 Jy/beam
! Combined flux in latest and established models = 0.616021 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 48 components and 0.616021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076115Jy  sigma=1.413659
! Fit after  self-cal, rms=0.076110Jy  sigma=1.413551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.8, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0068372 Jy
! Component: 100  -  total flux cleaned = 0.0105785 Jy
! Component: 150  -  total flux cleaned = 0.0124655 Jy
! Component: 200  -  total flux cleaned = 0.0130965 Jy
! Total flux subtracted in 200 components = 0.0130965 Jy
! Clean residual min=-0.005135 max=0.006272 Jy/beam
! Clean residual mean=-0.000037 rms=0.001472 Jy/beam
! Combined flux in latest and established models = 0.629118 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 70 components and 0.629118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075164Jy  sigma=1.402350
! Fit after  self-cal, rms=0.075132Jy  sigma=1.401261
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075132Jy  sigma=1.401261
! Fit after  self-cal, rms=0.073856Jy  sigma=1.377905
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.326 mas, bpa=6.415 degrees
! Estimated noise=0.338706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00259602 Jy
! Component: 100  -  total flux cleaned = -0.00224252 Jy
! Component: 150  -  total flux cleaned = -0.00230334 Jy
! Component: 200  -  total flux cleaned = -0.00230338 Jy
! Total flux subtracted in 200 components = -0.00230338 Jy
! Clean residual min=-0.003774 max=0.004113 Jy/beam
! Clean residual mean=-0.000017 rms=0.001034 Jy/beam
! Combined flux in latest and established models = 0.626814 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.626814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073587Jy  sigma=1.376380
! Fit after  self-cal, rms=0.073600Jy  sigma=1.376313
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101693 Jy
! Component: 100  -  total flux cleaned = 0.000100531 Jy
! Component: 150  -  total flux cleaned = 9.9599e-05 Jy
! Component: 200  -  total flux cleaned = 0.000146048 Jy
! Total flux subtracted in 200 components = 0.000146048 Jy
! Clean residual min=-0.003719 max=0.004112 Jy/beam
! Clean residual mean=-0.000018 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.62696 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.62696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073510Jy  sigma=1.375578
! Fit after  self-cal, rms=0.073510Jy  sigma=1.375552
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073510Jy  sigma=1.375552
! Fit after  self-cal, rms=0.072674Jy  sigma=1.361325
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.247 mas, bmaj=2.539 mas, bpa=16.84 degrees
! Estimated noise=0.423909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0019462 Jy
! Component: 100  -  total flux cleaned = -0.00238073 Jy
! Component: 150  -  total flux cleaned = -0.0027731 Jy
! Component: 200  -  total flux cleaned = -0.00283063 Jy
! Total flux subtracted in 200 components = -0.00283063 Jy
! Clean residual min=-0.004882 max=0.004748 Jy/beam
! Clean residual mean=-0.000022 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.62413 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.62413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072628Jy  sigma=1.361483
! Fit after  self-cal, rms=0.072638Jy  sigma=1.361359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000198645 Jy
! Component: 100  -  total flux cleaned = -0.000197624 Jy
! Component: 150  -  total flux cleaned = -0.000217614 Jy
! Component: 200  -  total flux cleaned = -0.000217062 Jy
! Total flux subtracted in 200 components = -0.000217062 Jy
! Clean residual min=-0.004912 max=0.004811 Jy/beam
! Clean residual mean=-0.000023 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.623913 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 95 components and 0.623913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072629Jy  sigma=1.361372
! Fit after  self-cal, rms=0.072628Jy  sigma=1.361344
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.105 mas, bmaj=1.326 mas, bpa=6.511 degrees
! Estimated noise=0.338018 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.105 x 1.326 at 6.511 degrees (North through East)
! Clean map  min=-0.0030303  max=0.529 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072628Jy  sigma=1.361344
! Fit after  self-cal, rms=0.069170Jy  sigma=1.283096
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=1.324 mas, bpa=5.884 degrees
! Estimated noise=0.335455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00292975 Jy
! Component: 100  -  total flux cleaned = -0.00357498 Jy
! Component: 150  -  total flux cleaned = -0.00406702 Jy
! Component: 200  -  total flux cleaned = -0.00431187 Jy
! Total flux subtracted in 200 components = -0.00431187 Jy
! Clean residual min=-0.003063 max=0.002949 Jy/beam
! Clean residual mean=-0.000007 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.619601 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.619601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068967Jy  sigma=1.279623
! Fit after  self-cal, rms=0.068964Jy  sigma=1.279595
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.07916e-05 Jy
! Component: 100  -  total flux cleaned = -0.000141176 Jy
! Component: 150  -  total flux cleaned = -0.00020646 Jy
! Component: 200  -  total flux cleaned = -0.00023747 Jy
! Total flux subtracted in 200 components = -0.00023747 Jy
! Clean residual min=-0.003043 max=0.002960 Jy/beam
! Clean residual mean=-0.000007 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.619363 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 114 components and 0.619363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068939Jy  sigma=1.278922
! Fit after  self-cal, rms=0.068938Jy  sigma=1.278914
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068938Jy  sigma=1.278914
! Fit after  self-cal, rms=0.068553Jy  sigma=1.276020
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8341 mas, bmaj=1.05 mas, bpa=17.35 degrees
! Estimated noise=0.614526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.391086 Jy
! Component: 100  -  total flux cleaned = 0.501719 Jy
! Component: 150  -  total flux cleaned = 0.547448 Jy
! Component: 200  -  total flux cleaned = 0.571355 Jy
! Total flux subtracted in 200 components = 0.571355 Jy
! Clean residual min=-0.008273 max=0.012044 Jy/beam
! Clean residual mean=0.000002 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 0.571355 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.571355 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.107 mas, bmaj=1.324 mas, bpa=5.636 degrees
! Estimated noise=0.333541 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155867 Jy
! Component: 100  -  total flux cleaned = 0.0245123 Jy
! Component: 150  -  total flux cleaned = 0.0305454 Jy
! Component: 200  -  total flux cleaned = 0.0349124 Jy
! Total flux subtracted in 200 components = 0.0349124 Jy
! Clean residual min=-0.003303 max=0.004555 Jy/beam
! Clean residual mean=-0.000001 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.606267 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 26 components and 0.606267 Jy
! Inverting map 
! Added new window around map position (10.6, 10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425102 Jy
! Component: 100  -  total flux cleaned = 0.00714095 Jy
! Component: 150  -  total flux cleaned = 0.00916621 Jy
! Component: 200  -  total flux cleaned = 0.0102562 Jy
! Total flux subtracted in 200 components = 0.0102562 Jy
! Clean residual min=-0.003250 max=0.003060 Jy/beam
! Clean residual mean=-0.000008 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.616523 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 45 components and 0.616524 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=2.536 mas, bpa=16.61 degrees
! Estimated noise=0.41828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017794 Jy
! Component: 100  -  total flux cleaned = 0.00261772 Jy
! Component: 150  -  total flux cleaned = 0.00300411 Jy
! Component: 200  -  total flux cleaned = 0.00325216 Jy
! Total flux subtracted in 200 components = 0.00325216 Jy
! Clean residual min=-0.003859 max=0.003464 Jy/beam
! Clean residual mean=-0.000023 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.619776 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.3645e-05 Jy
! Component: 100  -  total flux cleaned = 0.000203465 Jy
! Component: 150  -  total flux cleaned = 0.000261246 Jy
! Component: 200  -  total flux cleaned = 0.00034204 Jy
! Total flux subtracted in 200 components = 0.00034204 Jy
! Clean residual min=-0.003872 max=0.003343 Jy/beam
! Clean residual mean=-0.000024 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.620118 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 73 components and 0.620118 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.107 mas, bmaj=1.324 mas, bpa=5.636 degrees
! Estimated noise=0.333541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06593e-07 Jy
! Component: 100  -  total flux cleaned = -0.000199643 Jy
! Component: 150  -  total flux cleaned = -0.000200841 Jy
! Component: 200  -  total flux cleaned = -0.000199832 Jy
! Total flux subtracted in 200 components = -0.000199832 Jy
! Clean residual min=-0.002791 max=0.002832 Jy/beam
! Clean residual mean=-0.000009 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.619918 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.619918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068528Jy  sigma=1.276576
! Fit after  self-cal, rms=0.068487Jy  sigma=1.275850
wmodel /J1203+4803_X_map.mod
! wmodel: Unable to open new model file: /J1203+4803_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1203+4803_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.107 x 1.324 at 5.636 degrees (North through East)
! Clean map  min=-0.0024395  max=0.52123 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1203+4803_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.521235 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000663024 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.381608 0.381608 0.763215 1.52643 3.05286 6.10572 12.2114 24.4229 48.8458 97.6916
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.521 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  786.147 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1203+4803_X_dfm.log closed on Thu May 19 23:19:51 2016