! Started logfile: /scr/pima/bg219i_uvs/J1203+4632_X_dfm.log on Thu May 19 23:19:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1203+4632_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1203+4632_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.701639 visibilities/baseline/integration-bin.
! Found source: J1203+4632
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23112 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1203+4632_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002953Jy  sigma=24.660220
! Fit after  self-cal, rms=0.950112Jy  sigma=23.333831
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=1.262 mas, bpa=-18.17 degrees
! Estimated noise=0.456641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036572 Jy
! Component: 100  -  total flux cleaned = 0.0475556 Jy
! Total flux subtracted in 100 components = 0.0475556 Jy
! Clean residual min=-0.004371 max=0.006314 Jy/beam
! Clean residual mean=-0.000009 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.0475556 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0475556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064741Jy  sigma=1.454680
! Fit after  self-cal, rms=0.063559Jy  sigma=1.425160
! Inverting map 
! Added new window around map position (-4, -5.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833234 Jy
! Component: 100  -  total flux cleaned = 0.0143854 Jy
! Total flux subtracted in 100 components = 0.0143854 Jy
! Clean residual min=-0.003700 max=0.005155 Jy/beam
! Clean residual mean=-0.000007 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.061941 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.061941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061927Jy  sigma=1.378035
! Fit after  self-cal, rms=0.061818Jy  sigma=1.375122
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=1.577 mas, bpa=-8.216 degrees
! Estimated noise=0.206046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798602 Jy
! Component: 100  -  total flux cleaned = 0.0134226 Jy
! Component: 150  -  total flux cleaned = 0.0174019 Jy
! Component: 200  -  total flux cleaned = 0.0203663 Jy
! Total flux subtracted in 200 components = 0.0203663 Jy
! Clean residual min=-0.002563 max=0.003849 Jy/beam
! Clean residual mean=-0.000014 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.0823073 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.0823073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060603Jy  sigma=1.338393
! Fit after  self-cal, rms=0.060531Jy  sigma=1.335240
! Inverting map 
! Added new window around map position (-8.4, -8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422761 Jy
! Component: 100  -  total flux cleaned = 0.00692889 Jy
! Component: 150  -  total flux cleaned = 0.00908537 Jy
! Component: 200  -  total flux cleaned = 0.0108764 Jy
! Total flux subtracted in 200 components = 0.0108764 Jy
! Clean residual min=-0.002057 max=0.003474 Jy/beam
! Clean residual mean=-0.000013 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.0931837 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 81 components and 0.0931837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060173Jy  sigma=1.324688
! Fit after  self-cal, rms=0.060119Jy  sigma=1.323087
! Inverting map 
! Added new window around map position (0, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00344202 Jy
! Component: 100  -  total flux cleaned = 0.00502733 Jy
! Component: 150  -  total flux cleaned = 0.00615696 Jy
! Component: 200  -  total flux cleaned = 0.00693819 Jy
! Total flux subtracted in 200 components = 0.00693819 Jy
! Clean residual min=-0.001634 max=0.001858 Jy/beam
! Clean residual mean=-0.000007 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.100122 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 103 components and 0.100122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059873Jy  sigma=1.316187
! Fit after  self-cal, rms=0.059833Jy  sigma=1.315165
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.317 x 1.577 at -8.216 degrees (North through East)
! Clean map  min=-0.0015873  max=0.050644 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.94     MK        1.09     NL        1.03     OV        0.99     
!   PT        1.02     SC        1.19     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.13     KP        0.95     
!   LA        0.98     MK        0.97     NL        0.97     OV        1.02     
!   PT        1.05     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.07     KP        0.97     
!   LA        0.97     MK        1.16     NL        1.06     OV        0.97     
!   PT        1.06     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.08     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.08     KP        0.98     
!   LA        0.93     MK        1.02     NL        1.06     OV        0.97     
!   PT        1.03     SC        1.13     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.12     KP        1.00     
!   LA        0.92     MK        1.03     NL        1.06     OV        0.98     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.04     KP        1.08     
!   LA        0.90     MK        1.08     NL        0.99     OV        1.07     
!   PT        1.06     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.14     KP        1.05     
!   LA        0.95     MK        0.96     NL        1.07     OV        0.95     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.97     KP        1.06     
!   LA        1.03     MK        1.01     NL        1.09     OV        0.92     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.93     KP        1.04     
!   LA        1.00     MK        0.94     NL        1.03     OV        0.97     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.00     KP        1.00     
!   LA        0.94     MK        0.95     NL        1.02     OV        1.01     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.84     KP        1.01     
!   LA        0.97     MK        0.97     NL        1.05     OV        0.98     
!   PT        0.93     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.059833Jy  sigma=1.315165
! Fit after  self-cal, rms=0.060147Jy  sigma=1.311809
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.328 mas, bmaj=1.591 mas, bpa=-7.865 degrees
! Estimated noise=0.206943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134874 Jy
! Component: 100  -  total flux cleaned = 0.0022757 Jy
! Component: 150  -  total flux cleaned = 0.00291082 Jy
! Component: 200  -  total flux cleaned = 0.00337635 Jy
! Total flux subtracted in 200 components = 0.00337635 Jy
! Clean residual min=-0.001461 max=0.001466 Jy/beam
! Clean residual mean=-0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.103498 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 115 components and 0.103498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060062Jy  sigma=1.309658
! Fit after  self-cal, rms=0.060078Jy  sigma=1.308999
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060078Jy  sigma=1.308999
! Fit after  self-cal, rms=0.060959Jy  sigma=1.306630
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.324 mas, bmaj=1.583 mas, bpa=-9.015 degrees
! Estimated noise=0.206393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000923694 Jy
! Component: 100  -  total flux cleaned = 0.0015951 Jy
! Component: 150  -  total flux cleaned = 0.0020059 Jy
! Component: 200  -  total flux cleaned = 0.0023625 Jy
! Total flux subtracted in 200 components = 0.0023625 Jy
! Clean residual min=-0.001315 max=0.001219 Jy/beam
! Clean residual mean=0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.105861 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 123 components and 0.105861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060916Jy  sigma=1.305558
! Fit after  self-cal, rms=0.060957Jy  sigma=1.305261
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000537494 Jy
! Component: 100  -  total flux cleaned = 0.00085042 Jy
! Component: 150  -  total flux cleaned = 0.00105706 Jy
! Component: 200  -  total flux cleaned = 0.0011838 Jy
! Total flux subtracted in 200 components = 0.0011838 Jy
! Clean residual min=-0.001234 max=0.001163 Jy/beam
! Clean residual mean=0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.107045 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 132 components and 0.107045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060938Jy  sigma=1.304766
! Fit after  self-cal, rms=0.060937Jy  sigma=1.304714
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060937Jy  sigma=1.304714
! Fit after  self-cal, rms=0.061010Jy  sigma=1.305474
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.587 mas, bpa=-7.565 degrees
! Estimated noise=0.206261 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483896 Jy
! Component: 100  -  total flux cleaned = 0.00079921 Jy
! Component: 150  -  total flux cleaned = 0.00103768 Jy
! Component: 200  -  total flux cleaned = 0.00116307 Jy
! Total flux subtracted in 200 components = 0.00116307 Jy
! Clean residual min=-0.001199 max=0.001182 Jy/beam
! Clean residual mean=0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.108208 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 137 components and 0.108208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060995Jy  sigma=1.305099
! Fit after  self-cal, rms=0.060999Jy  sigma=1.305003
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294948 Jy
! Component: 100  -  total flux cleaned = 0.000417913 Jy
! Component: 150  -  total flux cleaned = 0.000515144 Jy
! Component: 200  -  total flux cleaned = 0.000575529 Jy
! Total flux subtracted in 200 components = 0.000575529 Jy
! Clean residual min=-0.001188 max=0.001187 Jy/beam
! Clean residual mean=0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.108783 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 141 components and 0.108783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060991Jy  sigma=1.304783
! Fit after  self-cal, rms=0.060989Jy  sigma=1.304764
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060989Jy  sigma=1.304764
! Fit after  self-cal, rms=0.060877Jy  sigma=1.304811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=2.623 mas, bpa=19.08 degrees
! Estimated noise=0.242522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000706241 Jy
! Component: 100  -  total flux cleaned = 0.00120457 Jy
! Component: 150  -  total flux cleaned = 0.00152701 Jy
! Component: 200  -  total flux cleaned = 0.00174244 Jy
! Total flux subtracted in 200 components = 0.00174244 Jy
! Clean residual min=-0.001319 max=0.001392 Jy/beam
! Clean residual mean=0.000000 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.110526 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 153 components and 0.110526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060873Jy  sigma=1.304631
! Fit after  self-cal, rms=0.060873Jy  sigma=1.304599
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8, -13.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000557632 Jy
! Component: 100  -  total flux cleaned = 0.000662051 Jy
! Component: 150  -  total flux cleaned = 0.000902835 Jy
! Component: 200  -  total flux cleaned = 0.00114041 Jy
! Total flux subtracted in 200 components = 0.00114041 Jy
! Clean residual min=-0.001001 max=0.000951 Jy/beam
! Clean residual mean=-0.000003 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.111666 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 185 components and 0.111666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060851Jy  sigma=1.303964
! Fit after  self-cal, rms=0.060854Jy  sigma=1.303867
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.325 mas, bmaj=1.588 mas, bpa=-6.826 degrees
! Estimated noise=0.205841 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.325 x 1.588 at -6.826 degrees (North through East)
! Clean map  min=-0.0010047  max=0.049608 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.268 mas, bpa=-17.79 degrees
! Estimated noise=0.458636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365981 Jy
! Component: 100  -  total flux cleaned = 0.0507824 Jy
! Component: 150  -  total flux cleaned = 0.0608213 Jy
! Component: 200  -  total flux cleaned = 0.0685304 Jy
! Total flux subtracted in 200 components = 0.0685304 Jy
! Clean residual min=-0.004090 max=0.004539 Jy/beam
! Clean residual mean=-0.000005 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.0685304 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.0685304 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.325 mas, bmaj=1.588 mas, bpa=-6.826 degrees
! Estimated noise=0.205841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846487 Jy
! Component: 100  -  total flux cleaned = 0.0143466 Jy
! Component: 150  -  total flux cleaned = 0.018797 Jy
! Component: 200  -  total flux cleaned = 0.0222805 Jy
! Total flux subtracted in 200 components = 0.0222805 Jy
! Clean residual min=-0.002097 max=0.002238 Jy/beam
! Clean residual mean=-0.000009 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.0908109 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 59 components and 0.0908109 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.28 mas, bmaj=2.623 mas, bpa=19.08 degrees
! Estimated noise=0.242522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372553 Jy
! Component: 100  -  total flux cleaned = 0.00639046 Jy
! Component: 150  -  total flux cleaned = 0.00851413 Jy
! Component: 200  -  total flux cleaned = 0.0102898 Jy
! Total flux subtracted in 200 components = 0.0102898 Jy
! Clean residual min=-0.001595 max=0.001790 Jy/beam
! Clean residual mean=-0.000006 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.101101 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151347 Jy
! Component: 100  -  total flux cleaned = 0.00270502 Jy
! Component: 150  -  total flux cleaned = 0.0036461 Jy
! Component: 200  -  total flux cleaned = 0.0045187 Jy
! Total flux subtracted in 200 components = 0.0045187 Jy
! Clean residual min=-0.001210 max=0.001261 Jy/beam
! Clean residual mean=-0.000005 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.105619 Jy
! Adding 108 model components to the UV plane model.
! The established model now contains 154 components and 0.105619 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.325 mas, bmaj=1.588 mas, bpa=-6.826 degrees
! Estimated noise=0.205841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032405 Jy
! Component: 100  -  total flux cleaned = 0.000917272 Jy
! Component: 150  -  total flux cleaned = 0.00133356 Jy
! Component: 200  -  total flux cleaned = 0.00178216 Jy
! Total flux subtracted in 200 components = 0.00178216 Jy
! Clean residual min=-0.001223 max=0.000983 Jy/beam
! Clean residual mean=-0.000003 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.107402 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 186 components and 0.107402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060888Jy  sigma=1.304747
! Fit after  self-cal, rms=0.060858Jy  sigma=1.304161
wmodel /J1203+4632_X_map.mod
! wmodel: Unable to open new model file: /J1203+4632_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1203+4632_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.325 x 1.588 at -6.826 degrees (North through East)
! Clean map  min=-0.0010725  max=0.050012 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1203+4632_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0500119 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248557 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.49099 1.49099 2.98197 5.96395 11.9279 23.8558 47.7116 95.4231
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.05 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  201.209 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1203+4632_X_dfm.log closed on Thu May 19 23:19:44 2016