! Started logfile: /scr/pima/bg219i_uvs/J1158+4825_X_dfm.log on Thu May 19 23:19:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1158+4825_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1158+4825_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801587 visibilities/baseline/integration-bin.
! Found source: J1158+4825
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18180 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1158+4825_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007861Jy  sigma=24.086655
! Fit after  self-cal, rms=0.897003Jy  sigma=21.327038
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.831 mas, bmaj=1.012 mas, bpa=11.35 degrees
! Estimated noise=0.538578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0757838 Jy
! Component: 100  -  total flux cleaned = 0.0993867 Jy
! Total flux subtracted in 100 components = 0.0993867 Jy
! Clean residual min=-0.005645 max=0.012638 Jy/beam
! Clean residual mean=-0.000007 rms=0.001466 Jy/beam
! Combined flux in latest and established models = 0.0993867 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0993867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069143Jy  sigma=1.506270
! Fit after  self-cal, rms=0.068901Jy  sigma=1.500776
! Inverting map 
! Added new window around map position (-1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144604 Jy
! Component: 100  -  total flux cleaned = 0.0224499 Jy
! Total flux subtracted in 100 components = 0.0224499 Jy
! Clean residual min=-0.004373 max=0.004855 Jy/beam
! Clean residual mean=-0.000005 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.121837 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.121837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065447Jy  sigma=1.394597
! Fit after  self-cal, rms=0.065361Jy  sigma=1.391512
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=1.292 mas, bpa=6.745 degrees
! Estimated noise=0.233985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00683731 Jy
! Component: 100  -  total flux cleaned = 0.0104106 Jy
! Component: 150  -  total flux cleaned = 0.0125088 Jy
! Component: 200  -  total flux cleaned = 0.0137603 Jy
! Total flux subtracted in 200 components = 0.0137603 Jy
! Clean residual min=-0.002198 max=0.002589 Jy/beam
! Clean residual mean=-0.000019 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.135597 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.135597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064816Jy  sigma=1.370462
! Fit after  self-cal, rms=0.064807Jy  sigma=1.369702
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.069 x 1.292 at 6.745 degrees (North through East)
! Clean map  min=-0.002186  max=0.1037 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        0.98     
!   LA        0.99     MK        1.06     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.90     KP        0.96     
!   LA        1.01     MK        1.03     NL        1.02     OV        0.98     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.97     KP        1.01     
!   LA        0.96     MK        1.04     NL        1.05     OV        0.95     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.94     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.95     MK        1.02     NL        1.01     OV        0.95     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.99     KP        0.98     
!   LA        1.04     MK        1.02     NL        0.99     OV        0.95     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.93     KP        0.95     
!   LA        0.98     MK        1.03     NL        0.99     OV        0.97     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.91     KP        1.00     
!   LA        1.00     MK        0.96     NL        0.98     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.91     KP        1.00     
!   LA        0.99     MK        0.97     NL        1.04     OV        0.95     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.06     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.03     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.10     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.94     KP        1.01     
!   LA        0.97     MK        1.02     NL        0.97     OV        0.94     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.064807Jy  sigma=1.369702
! Fit after  self-cal, rms=0.064562Jy  sigma=1.364353
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.075 mas, bmaj=1.303 mas, bpa=6.914 degrees
! Estimated noise=0.232093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270807 Jy
! Component: 100  -  total flux cleaned = 0.00377913 Jy
! Component: 150  -  total flux cleaned = 0.00439217 Jy
! Component: 200  -  total flux cleaned = 0.00481599 Jy
! Total flux subtracted in 200 components = 0.00481599 Jy
! Clean residual min=-0.001699 max=0.001808 Jy/beam
! Clean residual mean=-0.000014 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.140413 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 50 components and 0.140413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064429Jy  sigma=1.361271
! Fit after  self-cal, rms=0.064449Jy  sigma=1.360960
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064449Jy  sigma=1.360960
! Fit after  self-cal, rms=0.065823Jy  sigma=1.356198
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.075 mas, bmaj=1.3 mas, bpa=6.542 degrees
! Estimated noise=0.231721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188382 Jy
! Component: 100  -  total flux cleaned = 0.000242765 Jy
! Component: 150  -  total flux cleaned = 0.000265216 Jy
! Component: 200  -  total flux cleaned = 0.000285192 Jy
! Total flux subtracted in 200 components = 0.000285192 Jy
! Clean residual min=-0.001421 max=0.001505 Jy/beam
! Clean residual mean=-0.000003 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.140698 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.140698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065799Jy  sigma=1.355736
! Fit after  self-cal, rms=0.065841Jy  sigma=1.355643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125204 Jy
! Component: 100  -  total flux cleaned = 0.00164338 Jy
! Component: 150  -  total flux cleaned = 0.00178837 Jy
! Component: 200  -  total flux cleaned = 0.00182649 Jy
! Total flux subtracted in 200 components = 0.00182649 Jy
! Clean residual min=-0.001403 max=0.001534 Jy/beam
! Clean residual mean=-0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.142525 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.142525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065815Jy  sigma=1.354913
! Fit after  self-cal, rms=0.065815Jy  sigma=1.354868
! Inverting map 
! Added new window around map position (32.8, -22.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132196 Jy
! Component: 100  -  total flux cleaned = 0.00200541 Jy
! Component: 150  -  total flux cleaned = 0.0024659 Jy
! Component: 200  -  total flux cleaned = 0.00277444 Jy
! Total flux subtracted in 200 components = 0.00277444 Jy
! Clean residual min=-0.001376 max=0.001378 Jy/beam
! Clean residual mean=-0.000002 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.145299 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 0.145299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065776Jy  sigma=1.354206
! Fit after  self-cal, rms=0.065776Jy  sigma=1.354141
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065776Jy  sigma=1.354141
! Fit after  self-cal, rms=0.065668Jy  sigma=1.354016
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.3 mas, bpa=6.338 degrees
! Estimated noise=0.230944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255768 Jy
! Component: 100  -  total flux cleaned = 0.000456069 Jy
! Component: 150  -  total flux cleaned = 0.000526853 Jy
! Component: 200  -  total flux cleaned = 0.000576919 Jy
! Total flux subtracted in 200 components = 0.000576919 Jy
! Clean residual min=-0.001355 max=0.001320 Jy/beam
! Clean residual mean=-0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.145876 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 97 components and 0.145876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065654Jy  sigma=1.353805
! Fit after  self-cal, rms=0.065657Jy  sigma=1.353796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000221629 Jy
! Component: 100  -  total flux cleaned = 0.000267758 Jy
! Component: 150  -  total flux cleaned = 0.000297357 Jy
! Component: 200  -  total flux cleaned = 0.000325863 Jy
! Total flux subtracted in 200 components = 0.000325863 Jy
! Clean residual min=-0.001350 max=0.001293 Jy/beam
! Clean residual mean=-0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.146202 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 104 components and 0.146202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065650Jy  sigma=1.353662
! Fit after  self-cal, rms=0.065650Jy  sigma=1.353660
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065650Jy  sigma=1.353660
! Fit after  self-cal, rms=0.065561Jy  sigma=1.353630
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.265 mas, bmaj=2.535 mas, bpa=12.84 degrees
! Estimated noise=0.289884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04902e-06 Jy
! Component: 100  -  total flux cleaned = 0.000225729 Jy
! Component: 150  -  total flux cleaned = 0.000392715 Jy
! Component: 200  -  total flux cleaned = 0.000566562 Jy
! Total flux subtracted in 200 components = 0.000566562 Jy
! Clean residual min=-0.001218 max=0.001621 Jy/beam
! Clean residual mean=-0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.146768 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 122 components and 0.146768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065558Jy  sigma=1.353618
! Fit after  self-cal, rms=0.065557Jy  sigma=1.353596
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48.6, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136183 Jy
! Component: 100  -  total flux cleaned = 0.00160099 Jy
! Component: 150  -  total flux cleaned = 0.00171102 Jy
! Component: 200  -  total flux cleaned = 0.00174786 Jy
! Total flux subtracted in 200 components = 0.00174786 Jy
! Clean residual min=-0.001127 max=0.001149 Jy/beam
! Clean residual mean=-0.000006 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.148516 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 154 components and 0.148516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065534Jy  sigma=1.353109
! Fit after  self-cal, rms=0.065534Jy  sigma=1.353047
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.301 mas, bpa=6.316 degrees
! Estimated noise=0.230506 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.076 x 1.301 at 6.316 degrees (North through East)
! Clean map  min=-0.0011894  max=0.10264 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8354 mas, bmaj=1.017 mas, bpa=11.07 degrees
! Estimated noise=0.533426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0750258 Jy
! Component: 100  -  total flux cleaned = 0.0999743 Jy
! Component: 150  -  total flux cleaned = 0.112981 Jy
! Component: 200  -  total flux cleaned = 0.120602 Jy
! Total flux subtracted in 200 components = 0.120602 Jy
! Clean residual min=-0.003983 max=0.004289 Jy/beam
! Clean residual mean=-0.000003 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.120602 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.120602 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.301 mas, bpa=6.316 degrees
! Estimated noise=0.230506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634657 Jy
! Component: 100  -  total flux cleaned = 0.00980943 Jy
! Component: 150  -  total flux cleaned = 0.0124069 Jy
! Component: 200  -  total flux cleaned = 0.0144969 Jy
! Total flux subtracted in 200 components = 0.0144969 Jy
! Clean residual min=-0.001689 max=0.001630 Jy/beam
! Clean residual mean=-0.000007 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.135099 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 41 components and 0.135099 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.265 mas, bmaj=2.535 mas, bpa=12.84 degrees
! Estimated noise=0.289884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254402 Jy
! Component: 100  -  total flux cleaned = 0.00450026 Jy
! Component: 150  -  total flux cleaned = 0.00611584 Jy
! Component: 200  -  total flux cleaned = 0.00747949 Jy
! Total flux subtracted in 200 components = 0.00747949 Jy
! Clean residual min=-0.001443 max=0.001640 Jy/beam
! Clean residual mean=-0.000010 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.142578 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111749 Jy
! Component: 100  -  total flux cleaned = 0.00188133 Jy
! Component: 150  -  total flux cleaned = 0.0025497 Jy
! Component: 200  -  total flux cleaned = 0.00304617 Jy
! Total flux subtracted in 200 components = 0.00304617 Jy
! Clean residual min=-0.001223 max=0.001426 Jy/beam
! Clean residual mean=-0.000009 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.145624 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 119 components and 0.145624 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.076 mas, bmaj=1.301 mas, bpa=6.316 degrees
! Estimated noise=0.230506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381048 Jy
! Component: 100  -  total flux cleaned = 0.000742296 Jy
! Component: 150  -  total flux cleaned = 0.000905267 Jy
! Component: 200  -  total flux cleaned = 0.00108828 Jy
! Total flux subtracted in 200 components = 0.00108828 Jy
! Clean residual min=-0.001194 max=0.001252 Jy/beam
! Clean residual mean=-0.000004 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.146713 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 148 components and 0.146713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065573Jy  sigma=1.353928
! Fit after  self-cal, rms=0.065568Jy  sigma=1.353812
wmodel /J1158+4825_X_map.mod
! wmodel: Unable to open new model file: /J1158+4825_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1158+4825_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.076 x 1.301 at 6.316 degrees (North through East)
! Clean map  min=-0.001162  max=0.10242 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1158+4825_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.102421 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000279952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.820001 0.820001 1.64 3.28 6.56001 13.12 26.24 52.4801
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  365.853 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1158+4825_X_dfm.log closed on Thu May 19 23:19:35 2016