! Started logfile: /scr/pima/bg219i_uvs/J1150+0630_X_dfm.log on Thu May 19 23:19:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1150+0630_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1150+0630_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.696825 visibilities/baseline/integration-bin.
! Found source: J1150+0630
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15804 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1150+0630_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008113Jy  sigma=24.869945
! Fit after  self-cal, rms=0.902572Jy  sigma=22.141928
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7392 mas, bmaj=1.779 mas, bpa=-5.448 degrees
! Estimated noise=0.40219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0678583 Jy
! Component: 100  -  total flux cleaned = 0.094738 Jy
! Total flux subtracted in 100 components = 0.094738 Jy
! Clean residual min=-0.007195 max=0.016707 Jy/beam
! Clean residual mean=0.000011 rms=0.001933 Jy/beam
! Combined flux in latest and established models = 0.0947381 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0947381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068349Jy  sigma=1.609433
! Fit after  self-cal, rms=0.067879Jy  sigma=1.599260
! Inverting map 
! Added new window around map position (0.8, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193145 Jy
! Component: 100  -  total flux cleaned = 0.0311113 Jy
! Total flux subtracted in 100 components = 0.0311113 Jy
! Clean residual min=-0.005174 max=0.009265 Jy/beam
! Clean residual mean=0.000004 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.125849 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.125849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061127Jy  sigma=1.417107
! Fit after  self-cal, rms=0.060733Jy  sigma=1.407433
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00999657 Jy
! Component: 100  -  total flux cleaned = 0.0145082 Jy
! Total flux subtracted in 100 components = 0.0145082 Jy
! Clean residual min=-0.003959 max=0.005732 Jy/beam
! Clean residual mean=0.000001 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.140358 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.140358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059397Jy  sigma=1.371626
! Fit after  self-cal, rms=0.059173Jy  sigma=1.366165
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00371993 Jy
! Component: 100  -  total flux cleaned = 0.00361535 Jy
! Total flux subtracted in 100 components = 0.00361535 Jy
! Clean residual min=-0.003366 max=0.003960 Jy/beam
! Clean residual mean=-0.000000 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.143973 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.143973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058920Jy  sigma=1.360218
! Fit after  self-cal, rms=0.058814Jy  sigma=1.357696
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9821 mas, bmaj=2.199 mas, bpa=-6.179 degrees
! Estimated noise=0.24071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246124 Jy
! Component: 100  -  total flux cleaned = -0.000308202 Jy
! Component: 150  -  total flux cleaned = -0.000717831 Jy
! Component: 200  -  total flux cleaned = -0.0010786 Jy
! Total flux subtracted in 200 components = -0.0010786 Jy
! Clean residual min=-0.001981 max=0.002158 Jy/beam
! Clean residual mean=-0.000001 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.142894 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.142894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058689Jy  sigma=1.355133
! Fit after  self-cal, rms=0.058664Jy  sigma=1.354646
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9821 x 2.199 at -6.179 degrees (North through East)
! Clean map  min=-0.0018308  max=0.090943 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        1.01     
!   LA        0.95     MK        0.94     NL        1.00     OV        0.99     
!   PT        1.08     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.09     KP        0.99     
!   LA        1.02     MK        0.89     NL        0.99     OV        0.98     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.97     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.05     NL        0.98     OV        1.00     
!   PT        1.06     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.05     KP        1.00     
!   LA        0.97     MK        0.94     NL        1.03     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        1.01     
!   LA        1.00     MK        0.97     NL        1.00     OV        0.95     
!   PT        1.02     SC        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     HN        1.05     KP        1.01     
!   LA        0.98     MK        0.98     NL        1.05     OV        0.97     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        0.98     
!   LA        1.01     MK        0.93     NL        1.03     OV        1.02     
!   PT        1.00     SC        0.91     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.19     KP        1.00     
!   LA        1.00     MK        0.94     NL        0.95     OV        1.00     
!   PT        1.05     SC        1.09     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.97     KP        1.01     
!   LA        1.03     MK        0.98     NL        1.01     OV        0.96     
!   PT        1.03     SC        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        1.00     KP        1.01     
!   LA        0.99     MK        1.05     NL        0.99     OV        1.05     
!   PT        1.07     SC        0.85     
! 
! 
! Fit before self-cal, rms=0.058664Jy  sigma=1.354646
! Fit after  self-cal, rms=0.058814Jy  sigma=1.349668
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9759 mas, bmaj=2.184 mas, bpa=-6.13 degrees
! Estimated noise=0.239261 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000415114 Jy
! Component: 100  -  total flux cleaned = 0.000328361 Jy
! Component: 150  -  total flux cleaned = 0.000254898 Jy
! Component: 200  -  total flux cleaned = 0.000121594 Jy
! Total flux subtracted in 200 components = 0.000121594 Jy
! Clean residual min=-0.001736 max=0.001960 Jy/beam
! Clean residual mean=0.000001 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.143016 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 38 components and 0.143016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058745Jy  sigma=1.348351
! Fit after  self-cal, rms=0.058752Jy  sigma=1.347943
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058752Jy  sigma=1.347943
! Fit after  self-cal, rms=0.058824Jy  sigma=1.344650
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9742 mas, bmaj=2.182 mas, bpa=-6.18 degrees
! Estimated noise=0.238711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404967 Jy
! Component: 100  -  total flux cleaned = 0.000268582 Jy
! Component: 150  -  total flux cleaned = 9.33133e-05 Jy
! Component: 200  -  total flux cleaned = -1.32362e-05 Jy
! Total flux subtracted in 200 components = -1.32362e-05 Jy
! Clean residual min=-0.001691 max=0.001804 Jy/beam
! Clean residual mean=-0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.143003 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.143003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058778Jy  sigma=1.343765
! Fit after  self-cal, rms=0.058777Jy  sigma=1.343485
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159011 Jy
! Component: 100  -  total flux cleaned = 0.00199826 Jy
! Component: 150  -  total flux cleaned = 0.00210009 Jy
! Component: 200  -  total flux cleaned = 0.00210002 Jy
! Total flux subtracted in 200 components = 0.00210002 Jy
! Clean residual min=-0.001594 max=0.001515 Jy/beam
! Clean residual mean=-0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.145103 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.145103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058715Jy  sigma=1.342162
! Fit after  self-cal, rms=0.058707Jy  sigma=1.342031
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058707Jy  sigma=1.342031
! Fit after  self-cal, rms=0.058498Jy  sigma=1.341961
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9726 mas, bmaj=2.18 mas, bpa=-6.138 degrees
! Estimated noise=0.238297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000610241 Jy
! Component: 100  -  total flux cleaned = 0.000703684 Jy
! Component: 150  -  total flux cleaned = 0.000675649 Jy
! Component: 200  -  total flux cleaned = 0.000650049 Jy
! Total flux subtracted in 200 components = 0.000650049 Jy
! Clean residual min=-0.001579 max=0.001468 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.145753 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 58 components and 0.145753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058467Jy  sigma=1.341323
! Fit after  self-cal, rms=0.058463Jy  sigma=1.341253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181834 Jy
! Component: 100  -  total flux cleaned = 0.0001319 Jy
! Component: 150  -  total flux cleaned = 0.000108217 Jy
! Component: 200  -  total flux cleaned = 8.59191e-05 Jy
! Total flux subtracted in 200 components = 8.59191e-05 Jy
! Clean residual min=-0.001586 max=0.001463 Jy/beam
! Clean residual mean=-0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.145839 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 64 components and 0.145839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058441Jy  sigma=1.340816
! Fit after  self-cal, rms=0.058437Jy  sigma=1.340759
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058437Jy  sigma=1.340759
! Fit after  self-cal, rms=0.058303Jy  sigma=1.340735
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.263 mas, bmaj=3.324 mas, bpa=0.8425 degrees
! Estimated noise=0.299078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000356411 Jy
! Component: 100  -  total flux cleaned = -0.000415042 Jy
! Component: 150  -  total flux cleaned = -0.000415395 Jy
! Component: 200  -  total flux cleaned = -0.00041601 Jy
! Total flux subtracted in 200 components = -0.00041601 Jy
! Clean residual min=-0.001335 max=0.001334 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.145423 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 0.145423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058297Jy  sigma=1.340565
! Fit after  self-cal, rms=0.058293Jy  sigma=1.340480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.82332e-05 Jy
! Component: 100  -  total flux cleaned = -6.23256e-05 Jy
! Component: 150  -  total flux cleaned = -8.94165e-05 Jy
! Component: 200  -  total flux cleaned = -8.97672e-05 Jy
! Total flux subtracted in 200 components = -8.97672e-05 Jy
! Clean residual min=-0.001321 max=0.001299 Jy/beam
! Clean residual mean=-0.000002 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.145333 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.145333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058288Jy  sigma=1.340373
! Fit after  self-cal, rms=0.058284Jy  sigma=1.340286
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9715 mas, bmaj=2.179 mas, bpa=-6.117 degrees
! Estimated noise=0.238032 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9715 x 2.179 at -6.117 degrees (North through East)
! Clean map  min=-0.0013982  max=0.088588 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7315 mas, bmaj=1.764 mas, bpa=-5.196 degrees
! Estimated noise=0.393018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0691876 Jy
! Component: 100  -  total flux cleaned = 0.100171 Jy
! Component: 150  -  total flux cleaned = 0.117001 Jy
! Component: 200  -  total flux cleaned = 0.127485 Jy
! Total flux subtracted in 200 components = 0.127485 Jy
! Clean residual min=-0.003660 max=0.005535 Jy/beam
! Clean residual mean=0.000004 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.127485 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.127485 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9715 mas, bmaj=2.179 mas, bpa=-6.117 degrees
! Estimated noise=0.238032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00865577 Jy
! Component: 100  -  total flux cleaned = 0.0128402 Jy
! Component: 150  -  total flux cleaned = 0.0153841 Jy
! Component: 200  -  total flux cleaned = 0.0168371 Jy
! Total flux subtracted in 200 components = 0.0168371 Jy
! Clean residual min=-0.001894 max=0.001773 Jy/beam
! Clean residual mean=0.000000 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.144322 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 40 components and 0.144322 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.263 mas, bmaj=3.324 mas, bpa=0.8425 degrees
! Estimated noise=0.299078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000994548 Jy
! Component: 100  -  total flux cleaned = 0.00114998 Jy
! Component: 150  -  total flux cleaned = 0.00120861 Jy
! Component: 200  -  total flux cleaned = 0.00125922 Jy
! Total flux subtracted in 200 components = 0.00125922 Jy
! Clean residual min=-0.001233 max=0.001326 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.145581 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.12574e-07 Jy
! Component: 100  -  total flux cleaned = -4.19109e-05 Jy
! Component: 150  -  total flux cleaned = -6.03135e-05 Jy
! Component: 200  -  total flux cleaned = -9.41256e-05 Jy
! Total flux subtracted in 200 components = -9.41256e-05 Jy
! Clean residual min=-0.001209 max=0.001291 Jy/beam
! Clean residual mean=-0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.145487 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 71 components and 0.145487 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9715 mas, bmaj=2.179 mas, bpa=-6.117 degrees
! Estimated noise=0.238032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310938 Jy
! Component: 100  -  total flux cleaned = 0.000190348 Jy
! Component: 150  -  total flux cleaned = 0.000153337 Jy
! Component: 200  -  total flux cleaned = 5.25597e-05 Jy
! Total flux subtracted in 200 components = 5.25597e-05 Jy
! Clean residual min=-0.001626 max=0.001534 Jy/beam
! Clean residual mean=-0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.145539 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 79 components and 0.145539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058349Jy  sigma=1.341669
! Fit after  self-cal, rms=0.058293Jy  sigma=1.340525
wmodel /J1150+0630_X_map.mod
! wmodel: Unable to open new model file: /J1150+0630_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1150+0630_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9715 x 2.179 at -6.117 degrees (North through East)
! Clean map  min=-0.0013826  max=0.088665 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1150+0630_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0886649 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000334222 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13085 1.13085 2.2617 4.5234 9.0468 18.0936 36.1872 72.3744
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.287 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1150+0630_X_dfm.log closed on Thu May 19 23:19:10 2016