! Started logfile: /scr/pima/bg219i_uvs/J1146+3958_X_dfm.log on Thu May 19 23:18:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1146+3958_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1146+3958_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.793651 visibilities/baseline/integration-bin.
! Found source: J1146+3958
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6000 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1146+3958_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.159187Jy  sigma=36.671975
! Fit after  self-cal, rms=0.916226Jy  sigma=15.689505
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.842 mas, bmaj=1.098 mas, bpa=5.651 degrees
! Estimated noise=0.923225 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42524 Jy
! Component: 100  -  total flux cleaned = 1.74229 Jy
! Total flux subtracted in 100 components = 1.74229 Jy
! Clean residual min=-0.047750 max=0.109218 Jy/beam
! Clean residual mean=-0.000038 rms=0.011899 Jy/beam
! Combined flux in latest and established models = 1.74229 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.74229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.268227Jy  sigma=4.572016
! Fit after  self-cal, rms=0.268131Jy  sigma=4.571584
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11909 Jy
! Component: 100  -  total flux cleaned = 0.184596 Jy
! Total flux subtracted in 100 components = 0.184596 Jy
! Clean residual min=-0.033749 max=0.052317 Jy/beam
! Clean residual mean=0.000001 rms=0.008156 Jy/beam
! Combined flux in latest and established models = 1.92689 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 1.92689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.192601Jy  sigma=3.057115
! Fit after  self-cal, rms=0.192240Jy  sigma=3.052660
! Inverting map 
! Added new window around map position (9.4, 10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0495945 Jy
! Component: 100  -  total flux cleaned = 0.080719 Jy
! Total flux subtracted in 100 components = 0.080719 Jy
! Clean residual min=-0.032352 max=0.046179 Jy/beam
! Clean residual mean=-0.000004 rms=0.007258 Jy/beam
! Combined flux in latest and established models = 2.0076 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 2.0076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.175623Jy  sigma=2.744715
! Fit after  self-cal, rms=0.174656Jy  sigma=2.725006
! Inverting map 
! Added new window around map position (-26, 26.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0402187 Jy
! Component: 100  -  total flux cleaned = 0.064295 Jy
! Total flux subtracted in 100 components = 0.064295 Jy
! Clean residual min=-0.032689 max=0.039547 Jy/beam
! Clean residual mean=-0.000009 rms=0.006444 Jy/beam
! Combined flux in latest and established models = 2.0719 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 2.0719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.164396Jy  sigma=2.528788
! Fit after  self-cal, rms=0.163902Jy  sigma=2.510000
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=1.373 mas, bpa=6.888 degrees
! Estimated noise=0.604234 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275793 Jy
! Component: 100  -  total flux cleaned = 0.0467401 Jy
! Component: 150  -  total flux cleaned = 0.0605833 Jy
! Component: 200  -  total flux cleaned = 0.0707886 Jy
! Total flux subtracted in 200 components = 0.0707886 Jy
! Clean residual min=-0.026843 max=0.034461 Jy/beam
! Clean residual mean=-0.000070 rms=0.007172 Jy/beam
! Combined flux in latest and established models = 2.14269 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 38 components and 2.14269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.158707Jy  sigma=2.384949
! Fit after  self-cal, rms=0.158606Jy  sigma=2.376197
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.052 x 1.373 at 6.888 degrees (North through East)
! Clean map  min=-0.025667  max=1.854 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.00     OV        0.94     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.01     OV        0.94     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.94     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.96     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.93     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.00     OV        0.94     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.00     OV        0.95     
!   PT        1.07     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.01     NL        1.00     OV        0.95     
!   PT        1.03     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.158606Jy  sigma=2.376197
! Fit after  self-cal, rms=0.144630Jy  sigma=2.044226
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=1.382 mas, bpa=6.362 degrees
! Estimated noise=0.603817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0123683 Jy
! Component: 100  -  total flux cleaned = -0.0201705 Jy
! Component: 150  -  total flux cleaned = -0.024143 Jy
! Component: 200  -  total flux cleaned = -0.0253691 Jy
! Total flux subtracted in 200 components = -0.0253691 Jy
! Clean residual min=-0.026379 max=0.023572 Jy/beam
! Clean residual mean=-0.000140 rms=0.005483 Jy/beam
! Combined flux in latest and established models = 2.11732 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 2.11732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.143355Jy  sigma=2.021756
! Fit after  self-cal, rms=0.143161Jy  sigma=2.020027
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.143161Jy  sigma=2.020027
! Fit after  self-cal, rms=0.118303Jy  sigma=1.665579
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=1.381 mas, bpa=6.887 degrees
! Estimated noise=0.603906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0174071 Jy
! Component: 100  -  total flux cleaned = -0.0263639 Jy
! Component: 150  -  total flux cleaned = -0.0292296 Jy
! Component: 200  -  total flux cleaned = -0.0310427 Jy
! Total flux subtracted in 200 components = -0.0310427 Jy
! Clean residual min=-0.012135 max=0.008549 Jy/beam
! Clean residual mean=-0.000026 rms=0.002308 Jy/beam
! Combined flux in latest and established models = 2.08628 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 2.08628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115056Jy  sigma=1.620229
! Fit after  self-cal, rms=0.114358Jy  sigma=1.613056
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00479602 Jy
! Component: 100  -  total flux cleaned = -0.006326 Jy
! Component: 150  -  total flux cleaned = -0.00744727 Jy
! Component: 200  -  total flux cleaned = -0.00857661 Jy
! Total flux subtracted in 200 components = -0.00857661 Jy
! Clean residual min=-0.010546 max=0.008799 Jy/beam
! Clean residual mean=-0.000019 rms=0.002157 Jy/beam
! Combined flux in latest and established models = 2.0777 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 72 components and 2.0777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113786Jy  sigma=1.603772
! Fit after  self-cal, rms=0.113628Jy  sigma=1.602903
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113628Jy  sigma=1.602903
! Fit after  self-cal, rms=0.112362Jy  sigma=1.579872
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=1.379 mas, bpa=6.941 degrees
! Estimated noise=0.602736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0106607 Jy
! Component: 100  -  total flux cleaned = -0.0158854 Jy
! Component: 150  -  total flux cleaned = -0.0176362 Jy
! Component: 200  -  total flux cleaned = -0.0187702 Jy
! Total flux subtracted in 200 components = -0.0187702 Jy
! Clean residual min=-0.008533 max=0.007328 Jy/beam
! Clean residual mean=-0.000015 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 2.05893 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 74 components and 2.05893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111118Jy  sigma=1.561815
! Fit after  self-cal, rms=0.110839Jy  sigma=1.559197
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.002403 Jy
! Component: 100  -  total flux cleaned = -0.00329062 Jy
! Component: 150  -  total flux cleaned = -0.00410789 Jy
! Component: 200  -  total flux cleaned = -0.00476035 Jy
! Total flux subtracted in 200 components = -0.00476035 Jy
! Clean residual min=-0.007869 max=0.007432 Jy/beam
! Clean residual mean=-0.000012 rms=0.001677 Jy/beam
! Combined flux in latest and established models = 2.05417 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 76 components and 2.05417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110591Jy  sigma=1.554603
! Fit after  self-cal, rms=0.110530Jy  sigma=1.554297
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110530Jy  sigma=1.554297
! Fit after  self-cal, rms=0.110098Jy  sigma=1.544803
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=2.651 mas, bpa=7.11 degrees
! Estimated noise=0.782538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00847104 Jy
! Component: 100  -  total flux cleaned = -0.0122933 Jy
! Component: 150  -  total flux cleaned = -0.0136111 Jy
! Component: 200  -  total flux cleaned = -0.0147979 Jy
! Total flux subtracted in 200 components = -0.0147979 Jy
! Clean residual min=-0.008508 max=0.007618 Jy/beam
! Clean residual mean=-0.000026 rms=0.002123 Jy/beam
! Combined flux in latest and established models = 2.03937 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 82 components and 2.03937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109510Jy  sigma=1.537181
! Fit after  self-cal, rms=0.109358Jy  sigma=1.535648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00171844 Jy
! Component: 100  -  total flux cleaned = -0.00269879 Jy
! Component: 150  -  total flux cleaned = -0.00343995 Jy
! Component: 200  -  total flux cleaned = -0.00414182 Jy
! Total flux subtracted in 200 components = -0.00414182 Jy
! Clean residual min=-0.008115 max=0.007524 Jy/beam
! Clean residual mean=-0.000021 rms=0.002031 Jy/beam
! Combined flux in latest and established models = 2.03523 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 93 components and 2.03523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109279Jy  sigma=1.534701
! Fit after  self-cal, rms=0.109237Jy  sigma=1.534254
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=1.378 mas, bpa=7.011 degrees
! Estimated noise=0.601677 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.057 x 1.378 at 7.011 degrees (North through East)
! Clean map  min=-0.0066207  max=1.8598 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109237Jy  sigma=1.534254
! Fit after  self-cal, rms=0.086369Jy  sigma=1.189177
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=1.377 mas, bpa=6.688 degrees
! Estimated noise=0.599755 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00471446 Jy
! Component: 100  -  total flux cleaned = -0.00618873 Jy
! Component: 150  -  total flux cleaned = -0.00643373 Jy
! Component: 200  -  total flux cleaned = -0.00654134 Jy
! Total flux subtracted in 200 components = -0.00654134 Jy
! Clean residual min=-0.007245 max=0.009101 Jy/beam
! Clean residual mean=-0.000023 rms=0.001717 Jy/beam
! Combined flux in latest and established models = 2.02869 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 97 components and 2.02869 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085875Jy  sigma=1.181521
! Fit after  self-cal, rms=0.085855Jy  sigma=1.181105
! Inverting map 
! Added new window around map position (-3.2, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00379527 Jy
! Component: 100  -  total flux cleaned = 0.00365861 Jy
! Component: 150  -  total flux cleaned = 0.00299978 Jy
! Component: 200  -  total flux cleaned = 0.00227406 Jy
! Total flux subtracted in 200 components = 0.00227406 Jy
! Clean residual min=-0.006378 max=0.007276 Jy/beam
! Clean residual mean=-0.000021 rms=0.001617 Jy/beam
! Combined flux in latest and established models = 2.03096 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 109 components and 2.03096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084882Jy  sigma=1.164202
! Fit after  self-cal, rms=0.084871Jy  sigma=1.163480
! Inverting map 
! Added new window around map position (-0.2, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401196 Jy
! Component: 100  -  total flux cleaned = 0.00489864 Jy
! Component: 150  -  total flux cleaned = 0.00472952 Jy
! Component: 200  -  total flux cleaned = 0.00428391 Jy
! Total flux subtracted in 200 components = 0.00428391 Jy
! Clean residual min=-0.006035 max=0.005876 Jy/beam
! Clean residual mean=-0.000016 rms=0.001477 Jy/beam
! Combined flux in latest and established models = 2.03525 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 126 components and 2.03525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083824Jy  sigma=1.147026
! Fit after  self-cal, rms=0.083806Jy  sigma=1.145944
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083806Jy  sigma=1.145944
! Fit after  self-cal, rms=0.083275Jy  sigma=1.139935
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8451 mas, bmaj=1.103 mas, bpa=5.805 degrees
! Estimated noise=0.92112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42189 Jy
! Component: 100  -  total flux cleaned = 1.73634 Jy
! Component: 150  -  total flux cleaned = 1.85015 Jy
! Component: 200  -  total flux cleaned = 1.91157 Jy
! Total flux subtracted in 200 components = 1.91157 Jy
! Clean residual min=-0.017704 max=0.030019 Jy/beam
! Clean residual mean=-0.000024 rms=0.004220 Jy/beam
! Combined flux in latest and established models = 1.91157 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.91157 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=1.378 mas, bpa=6.635 degrees
! Estimated noise=0.599102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.044394 Jy
! Component: 100  -  total flux cleaned = 0.0689314 Jy
! Component: 150  -  total flux cleaned = 0.0857475 Jy
! Component: 200  -  total flux cleaned = 0.0966447 Jy
! Total flux subtracted in 200 components = 0.0966447 Jy
! Clean residual min=-0.008240 max=0.011907 Jy/beam
! Clean residual mean=-0.000024 rms=0.002086 Jy/beam
! Combined flux in latest and established models = 2.00822 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 40 components and 2.00822 Jy
! Inverting map 
! Added new window around map position (20.4, -23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00804663 Jy
! Component: 100  -  total flux cleaned = 0.0125633 Jy
! Component: 150  -  total flux cleaned = 0.0162006 Jy
! Component: 200  -  total flux cleaned = 0.0197403 Jy
! Total flux subtracted in 200 components = 0.0197403 Jy
! Clean residual min=-0.006985 max=0.008715 Jy/beam
! Clean residual mean=-0.000018 rms=0.001731 Jy/beam
! Combined flux in latest and established models = 2.02796 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 2.02796 Jy
! Inverting map 
! Added new window around map position (12.2, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572082 Jy
! Component: 100  -  total flux cleaned = 0.00669493 Jy
! Component: 150  -  total flux cleaned = 0.00735593 Jy
! Component: 200  -  total flux cleaned = 0.0079686 Jy
! Total flux subtracted in 200 components = 0.0079686 Jy
! Clean residual min=-0.006695 max=0.007169 Jy/beam
! Clean residual mean=-0.000014 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 2.03593 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 68 components and 2.03593 Jy
! Inverting map 
! Added new window around map position (15.8, -25.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293941 Jy
! Component: 100  -  total flux cleaned = 0.002287 Jy
! Component: 150  -  total flux cleaned = 0.00210549 Jy
! Component: 200  -  total flux cleaned = 0.00177219 Jy
! Total flux subtracted in 200 components = 0.00177219 Jy
! Clean residual min=-0.005976 max=0.006365 Jy/beam
! Clean residual mean=-0.000013 rms=0.001424 Jy/beam
! Combined flux in latest and established models = 2.0377 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 87 components and 2.0377 Jy
! Inverting map 
! Added new window around map position (-6.4, 16.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245162 Jy
! Component: 100  -  total flux cleaned = 0.00245018 Jy
! Component: 150  -  total flux cleaned = 0.00290852 Jy
! Component: 200  -  total flux cleaned = 0.00305726 Jy
! Total flux subtracted in 200 components = 0.00305726 Jy
! Clean residual min=-0.005320 max=0.005490 Jy/beam
! Clean residual mean=-0.000016 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 2.04076 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 105 components and 2.04076 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.183 mas, bmaj=2.647 mas, bpa=6.44 degrees
! Estimated noise=0.779525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632836 Jy
! Component: 100  -  total flux cleaned = 0.000511731 Jy
! Component: 150  -  total flux cleaned = 0.000626025 Jy
! Component: 200  -  total flux cleaned = 0.000623972 Jy
! Total flux subtracted in 200 components = 0.000623972 Jy
! Clean residual min=-0.007166 max=0.006627 Jy/beam
! Clean residual mean=-0.000038 rms=0.001741 Jy/beam
! Combined flux in latest and established models = 2.04138 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.38933e-05 Jy
! Component: 100  -  total flux cleaned = 0.000274598 Jy
! Component: 150  -  total flux cleaned = 0.00035989 Jy
! Component: 200  -  total flux cleaned = 0.000441421 Jy
! Total flux subtracted in 200 components = 0.000441421 Jy
! Clean residual min=-0.007017 max=0.006505 Jy/beam
! Clean residual mean=-0.000040 rms=0.001706 Jy/beam
! Combined flux in latest and established models = 2.04182 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 137 components and 2.04182 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=1.378 mas, bpa=6.635 degrees
! Estimated noise=0.599102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141876 Jy
! Component: 100  -  total flux cleaned = 0.000529337 Jy
! Component: 150  -  total flux cleaned = 0.00076367 Jy
! Component: 200  -  total flux cleaned = 0.000985841 Jy
! Total flux subtracted in 200 components = 0.000985841 Jy
! Clean residual min=-0.004906 max=0.005494 Jy/beam
! Clean residual mean=-0.000018 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 2.04281 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 149 components and 2.04281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080794Jy  sigma=1.099446
! Fit after  self-cal, rms=0.080591Jy  sigma=1.094529
wmodel /J1146+3958_X_map.mod
! wmodel: Unable to open new model file: /J1146+3958_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1146+3958_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.057 x 1.378 at 6.635 degrees (North through East)
! Clean map  min=-0.0088707  max=1.8558 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1146+3958_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.8558 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00118665 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.191828 0.191828 0.383656 0.767313 1.53463 3.06925 6.1385 12.277 24.554 49.108 98.216
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0035 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.855 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1563.9 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1146+3958_X_dfm.log closed on Thu May 19 23:19:02 2016