! Started logfile: /scr/pima/bg219i_uvs/J1146+0458_X_dfm.log on Thu May 19 23:18:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1146+0458_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1146+0458_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.730466 visibilities/baseline/integration-bin.
! Found source: J1146+0458
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24456 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1146+0458_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 118 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021560Jy  sigma=24.622452
! Fit after  self-cal, rms=0.843033Jy  sigma=20.328518
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7363 mas, bmaj=1.746 mas, bpa=-5.344 degrees
! Estimated noise=0.439684 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119043 Jy
! Component: 100  -  total flux cleaned = 0.146229 Jy
! Total flux subtracted in 100 components = 0.146229 Jy
! Clean residual min=-0.004167 max=0.010157 Jy/beam
! Clean residual mean=0.000001 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.146229 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.146229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062495Jy  sigma=1.441043
! Fit after  self-cal, rms=0.062472Jy  sigma=1.440711
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107432 Jy
! Component: 100  -  total flux cleaned = 0.0163178 Jy
! Total flux subtracted in 100 components = 0.0163178 Jy
! Clean residual min=-0.003096 max=0.003343 Jy/beam
! Clean residual mean=0.000002 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.162547 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 11 components and 0.162547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060016Jy  sigma=1.375303
! Fit after  self-cal, rms=0.060010Jy  sigma=1.375036
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9387 mas, bmaj=2.087 mas, bpa=-5.163 degrees
! Estimated noise=0.203182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473976 Jy
! Component: 100  -  total flux cleaned = 0.00657893 Jy
! Component: 150  -  total flux cleaned = 0.00737993 Jy
! Component: 200  -  total flux cleaned = 0.00753181 Jy
! Total flux subtracted in 200 components = 0.00753181 Jy
! Clean residual min=-0.001697 max=0.003326 Jy/beam
! Clean residual mean=0.000005 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.170078 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.170078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059718Jy  sigma=1.366468
! Fit after  self-cal, rms=0.059715Jy  sigma=1.366296
! Inverting map 
! Added new window around map position (-4.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275729 Jy
! Component: 100  -  total flux cleaned = 0.00351464 Jy
! Component: 150  -  total flux cleaned = 0.00383669 Jy
! Component: 200  -  total flux cleaned = 0.00398428 Jy
! Total flux subtracted in 200 components = 0.00398428 Jy
! Clean residual min=-0.001517 max=0.001859 Jy/beam
! Clean residual mean=0.000003 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.174063 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.174063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059584Jy  sigma=1.363200
! Fit after  self-cal, rms=0.059575Jy  sigma=1.362966
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9387 x 2.087 at -5.163 degrees (North through East)
! Clean map  min=-0.0014875  max=0.15861 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.05     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.04     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.00     KP        1.04     
!   LA        0.97     MK        1.03     NL        1.00     OV        0.96     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.99     MK        0.97     NL        1.02     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.01     KP        1.02     
!   LA        0.95     MK        0.97     NL        1.04     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.02     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.00     NL        1.03     OV        0.99     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.95     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.02     KP        1.01     
!   LA        0.98     MK        0.97     NL        1.03     OV        0.99     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.04     KP        1.03     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.01     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.059575Jy  sigma=1.362966
! Fit after  self-cal, rms=0.059524Jy  sigma=1.358197
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9384 mas, bmaj=2.087 mas, bpa=-5.144 degrees
! Estimated noise=0.202824 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104493 Jy
! Component: 100  -  total flux cleaned = 0.0011716 Jy
! Component: 150  -  total flux cleaned = 0.00118883 Jy
! Component: 200  -  total flux cleaned = 0.00123566 Jy
! Total flux subtracted in 200 components = 0.00123566 Jy
! Clean residual min=-0.001280 max=0.001383 Jy/beam
! Clean residual mean=0.000003 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.175298 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 55 components and 0.175298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059499Jy  sigma=1.357569
! Fit after  self-cal, rms=0.059512Jy  sigma=1.357456
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059512Jy  sigma=1.357456
! Fit after  self-cal, rms=0.059681Jy  sigma=1.355127
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9386 mas, bmaj=2.087 mas, bpa=-5.139 degrees
! Estimated noise=0.202836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000441558 Jy
! Component: 100  -  total flux cleaned = 0.000351101 Jy
! Component: 150  -  total flux cleaned = 0.000276877 Jy
! Component: 200  -  total flux cleaned = 0.000237865 Jy
! Total flux subtracted in 200 components = 0.000237865 Jy
! Clean residual min=-0.001186 max=0.001160 Jy/beam
! Clean residual mean=0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.175536 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.175536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059670Jy  sigma=1.354860
! Fit after  self-cal, rms=0.059675Jy  sigma=1.354809
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64386e-05 Jy
! Component: 100  -  total flux cleaned = 5.78389e-05 Jy
! Component: 150  -  total flux cleaned = 3.52826e-05 Jy
! Component: 200  -  total flux cleaned = 3.89539e-06 Jy
! Total flux subtracted in 200 components = 3.89539e-06 Jy
! Clean residual min=-0.001155 max=0.001172 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.17554 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 0.17554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059671Jy  sigma=1.354694
! Fit after  self-cal, rms=0.059670Jy  sigma=1.354683
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059670Jy  sigma=1.354683
! Fit after  self-cal, rms=0.059690Jy  sigma=1.354658
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9389 mas, bmaj=2.087 mas, bpa=-5.146 degrees
! Estimated noise=0.202827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.49593e-05 Jy
! Component: 100  -  total flux cleaned = -2.04e-05 Jy
! Component: 150  -  total flux cleaned = -6.12254e-05 Jy
! Component: 200  -  total flux cleaned = -7.99357e-05 Jy
! Total flux subtracted in 200 components = -7.99357e-05 Jy
! Clean residual min=-0.001177 max=0.001134 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.17546 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 70 components and 0.17546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059686Jy  sigma=1.354567
! Fit after  self-cal, rms=0.059686Jy  sigma=1.354557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.2907e-05 Jy
! Component: 100  -  total flux cleaned = -4.20281e-06 Jy
! Component: 150  -  total flux cleaned = -1.25008e-05 Jy
! Component: 200  -  total flux cleaned = -2.85335e-05 Jy
! Total flux subtracted in 200 components = -2.85335e-05 Jy
! Clean residual min=-0.001159 max=0.001128 Jy/beam
! Clean residual mean=0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.175432 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.175432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059684Jy  sigma=1.354502
! Fit after  self-cal, rms=0.059684Jy  sigma=1.354499
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059684Jy  sigma=1.354499
! Fit after  self-cal, rms=0.059680Jy  sigma=1.354493
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.356 mas, bmaj=3.322 mas, bpa=5.924 degrees
! Estimated noise=0.253879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150155 Jy
! Component: 100  -  total flux cleaned = 0.000140881 Jy
! Component: 150  -  total flux cleaned = 0.000125998 Jy
! Component: 200  -  total flux cleaned = 0.000106132 Jy
! Total flux subtracted in 200 components = 0.000106132 Jy
! Clean residual min=-0.001172 max=0.001605 Jy/beam
! Clean residual mean=0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.175538 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 85 components and 0.175538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059679Jy  sigma=1.354463
! Fit after  self-cal, rms=0.059680Jy  sigma=1.354458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142228 Jy
! Component: 100  -  total flux cleaned = 0.00200278 Jy
! Component: 150  -  total flux cleaned = 0.00248296 Jy
! Component: 200  -  total flux cleaned = 0.00286455 Jy
! Total flux subtracted in 200 components = 0.00286455 Jy
! Clean residual min=-0.000886 max=0.001120 Jy/beam
! Clean residual mean=-0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.178402 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 133 components and 0.178402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059651Jy  sigma=1.353787
! Fit after  self-cal, rms=0.059650Jy  sigma=1.353747
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=2.088 mas, bpa=-5.155 degrees
! Estimated noise=0.202793 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.939 x 2.088 at -5.155 degrees (North through East)
! Clean map  min=-0.0008737  max=0.1584 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7362 mas, bmaj=1.748 mas, bpa=-5.347 degrees
! Estimated noise=0.439001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118806 Jy
! Component: 100  -  total flux cleaned = 0.146097 Jy
! Component: 150  -  total flux cleaned = 0.1569 Jy
! Component: 200  -  total flux cleaned = 0.162564 Jy
! Total flux subtracted in 200 components = 0.162564 Jy
! Clean residual min=-0.002952 max=0.003163 Jy/beam
! Clean residual mean=0.000001 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.162564 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.162564 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=2.088 mas, bpa=-5.155 degrees
! Estimated noise=0.202793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00549808 Jy
! Component: 100  -  total flux cleaned = 0.00853642 Jy
! Component: 150  -  total flux cleaned = 0.0104227 Jy
! Component: 200  -  total flux cleaned = 0.0117955 Jy
! Total flux subtracted in 200 components = 0.0117955 Jy
! Clean residual min=-0.001134 max=0.001224 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.174359 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.174359 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.356 mas, bmaj=3.322 mas, bpa=5.924 degrees
! Estimated noise=0.253879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162506 Jy
! Component: 100  -  total flux cleaned = 0.00279607 Jy
! Component: 150  -  total flux cleaned = 0.00350969 Jy
! Component: 200  -  total flux cleaned = 0.00395056 Jy
! Total flux subtracted in 200 components = 0.00395056 Jy
! Clean residual min=-0.001065 max=0.001160 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.17831 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000321205 Jy
! Component: 100  -  total flux cleaned = 0.000576873 Jy
! Component: 150  -  total flux cleaned = 0.000821377 Jy
! Component: 200  -  total flux cleaned = 0.00103739 Jy
! Total flux subtracted in 200 components = 0.00103739 Jy
! Clean residual min=-0.000868 max=0.001096 Jy/beam
! Clean residual mean=-0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.179347 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 75 components and 0.179347 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=2.088 mas, bpa=-5.155 degrees
! Estimated noise=0.202793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.50347e-05 Jy
! Component: 100  -  total flux cleaned = 7.09272e-05 Jy
! Component: 150  -  total flux cleaned = 0.000142449 Jy
! Component: 200  -  total flux cleaned = 0.000250166 Jy
! Total flux subtracted in 200 components = 0.000250166 Jy
! Clean residual min=-0.000913 max=0.000977 Jy/beam
! Clean residual mean=-0.000001 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.179597 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 98 components and 0.179597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059666Jy  sigma=1.354083
! Fit after  self-cal, rms=0.059663Jy  sigma=1.353997
wmodel /J1146+0458_X_map.mod
! wmodel: Unable to open new model file: /J1146+0458_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1146+0458_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.939 x 2.088 at -5.155 degrees (North through East)
! Clean map  min=-0.00083528  max=0.1581 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1146+0458_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.158101 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000228652 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.433872 0.433872 0.867744 1.73549 3.47098 6.94195 13.8839 27.7678 55.5356
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.158 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  691.448 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1146+0458_X_dfm.log closed on Thu May 19 23:18:54 2016