! Started logfile: /scr/pima/bg219i_uvs/J1133+0040_X_dfm.log on Thu May 19 23:18:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1133+0040_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1133+0040_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J1133+0040
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3360 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1133+0040_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021317Jy  sigma=20.955990
! Fit after  self-cal, rms=0.754048Jy  sigma=15.482000
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6531 mas, bmaj=1.671 mas, bpa=-0.7843 degrees
! Estimated noise=0.943915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181725 Jy
! Component: 100  -  total flux cleaned = 0.238448 Jy
! Total flux subtracted in 100 components = 0.238448 Jy
! Clean residual min=-0.012358 max=0.023597 Jy/beam
! Clean residual mean=0.000001 rms=0.003165 Jy/beam
! Combined flux in latest and established models = 0.238448 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.238448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077747Jy  sigma=1.557824
! Fit after  self-cal, rms=0.077553Jy  sigma=1.554520
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254353 Jy
! Component: 100  -  total flux cleaned = 0.039574 Jy
! Total flux subtracted in 100 components = 0.039574 Jy
! Clean residual min=-0.008934 max=0.011303 Jy/beam
! Clean residual mean=-0.000000 rms=0.001851 Jy/beam
! Combined flux in latest and established models = 0.278022 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.278022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066136Jy  sigma=1.285512
! Fit after  self-cal, rms=0.066061Jy  sigma=1.283955
! Inverting map 
! Added new window around map position (0.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113047 Jy
! Component: 100  -  total flux cleaned = 0.0177829 Jy
! Total flux subtracted in 100 components = 0.0177829 Jy
! Clean residual min=-0.006607 max=0.005919 Jy/beam
! Clean residual mean=-0.000000 rms=0.001424 Jy/beam
! Combined flux in latest and established models = 0.295805 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 24 components and 0.295805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063938Jy  sigma=1.230078
! Fit after  self-cal, rms=0.063855Jy  sigma=1.228325
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7962 mas, bmaj=1.961 mas, bpa=-1.646 degrees
! Estimated noise=0.684675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529797 Jy
! Component: 100  -  total flux cleaned = 0.0079784 Jy
! Component: 150  -  total flux cleaned = 0.00932471 Jy
! Component: 200  -  total flux cleaned = 0.00976214 Jy
! Total flux subtracted in 200 components = 0.00976214 Jy
! Clean residual min=-0.004608 max=0.003932 Jy/beam
! Clean residual mean=-0.000001 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.305567 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 35 components and 0.305567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063527Jy  sigma=1.216995
! Fit after  self-cal, rms=0.063504Jy  sigma=1.216588
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7962 x 1.961 at -1.646 degrees (North through East)
! Clean map  min=-0.0042492  max=0.2452 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        0.99     
!   LA        0.93     MK        1.03     NL        0.99     OV        0.98     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        1.02     
!   LA        0.96     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.01     KP        1.00     
!   LA        0.97     MK        1.03     NL        0.99     OV        0.96     
!   PT        1.03     SC        1.12     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.06     KP        1.00     
!   LA        0.94     MK        0.97     NL        1.04     OV        0.95     
!   PT        1.07     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.97     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.05     KP        1.01     
!   LA        0.98     MK        0.96     NL        1.03     OV        0.93     
!   PT        1.04     SC        0.89     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.02     KP        1.01     
!   LA        0.95     MK        0.99     NL        1.03     OV        0.95     
!   PT        1.04     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.02     HN        1.00     KP        1.03     
!   LA        0.99     MK        1.00     NL        0.96     OV        1.02     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.02     OV        0.99     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.01     NL        0.99     OV        1.00     
!   PT        1.03     SC        1.16     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        0.97     
!   LA        1.00     MK        1.03     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.05     NL        1.00     OV        1.02     
!   PT        1.10     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.063504Jy  sigma=1.216588
! Fit after  self-cal, rms=0.063040Jy  sigma=1.193630
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.798 mas, bmaj=1.963 mas, bpa=-1.582 degrees
! Estimated noise=0.683089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128436 Jy
! Component: 100  -  total flux cleaned = -0.00158024 Jy
! Component: 150  -  total flux cleaned = -0.00172413 Jy
! Component: 200  -  total flux cleaned = -0.00186487 Jy
! Total flux subtracted in 200 components = -0.00186487 Jy
! Clean residual min=-0.003673 max=0.003351 Jy/beam
! Clean residual mean=-0.000001 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.303702 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 39 components and 0.303702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063016Jy  sigma=1.192815
! Fit after  self-cal, rms=0.063031Jy  sigma=1.192693
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063031Jy  sigma=1.192693
! Fit after  self-cal, rms=0.062976Jy  sigma=1.192606
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7986 mas, bmaj=1.963 mas, bpa=-1.546 degrees
! Estimated noise=0.682269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000796852 Jy
! Component: 100  -  total flux cleaned = -0.000986398 Jy
! Component: 150  -  total flux cleaned = -0.00107435 Jy
! Component: 200  -  total flux cleaned = -0.00109044 Jy
! Total flux subtracted in 200 components = -0.00109044 Jy
! Clean residual min=-0.003625 max=0.003287 Jy/beam
! Clean residual mean=-0.000001 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.302611 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 43 components and 0.302611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062962Jy  sigma=1.192297
! Fit after  self-cal, rms=0.062960Jy  sigma=1.192263
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.54677e-05 Jy
! Component: 100  -  total flux cleaned = -2.89159e-05 Jy
! Component: 150  -  total flux cleaned = -2.86182e-05 Jy
! Component: 200  -  total flux cleaned = -4.46501e-05 Jy
! Total flux subtracted in 200 components = -4.46501e-05 Jy
! Clean residual min=-0.003580 max=0.003232 Jy/beam
! Clean residual mean=-0.000001 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.302567 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.302567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062952Jy  sigma=1.192095
! Fit after  self-cal, rms=0.062951Jy  sigma=1.192074
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062951Jy  sigma=1.192074
! Fit after  self-cal, rms=0.062894Jy  sigma=1.192019
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7991 mas, bmaj=1.964 mas, bpa=-1.52 degrees
! Estimated noise=0.681512 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000627259 Jy
! Component: 100  -  total flux cleaned = -0.000730619 Jy
! Component: 150  -  total flux cleaned = -0.000745977 Jy
! Component: 200  -  total flux cleaned = -0.000761488 Jy
! Total flux subtracted in 200 components = -0.000761488 Jy
! Clean residual min=-0.003571 max=0.003186 Jy/beam
! Clean residual mean=-0.000001 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.301805 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.301805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062883Jy  sigma=1.191857
! Fit after  self-cal, rms=0.062882Jy  sigma=1.191839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.59515e-06 Jy
! Component: 100  -  total flux cleaned = -3.52708e-06 Jy
! Component: 150  -  total flux cleaned = -1.76269e-05 Jy
! Component: 200  -  total flux cleaned = -3.1732e-05 Jy
! Total flux subtracted in 200 components = -3.1732e-05 Jy
! Clean residual min=-0.003538 max=0.003149 Jy/beam
! Clean residual mean=-0.000001 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.301774 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.301774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062875Jy  sigma=1.191716
! Fit after  self-cal, rms=0.062874Jy  sigma=1.191705
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062874Jy  sigma=1.191705
! Fit after  self-cal, rms=0.062822Jy  sigma=1.191663
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.232 mas, bpa=-4.577 degrees
! Estimated noise=0.92323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.63692e-06 Jy
! Component: 100  -  total flux cleaned = -0.000168426 Jy
! Component: 150  -  total flux cleaned = -0.000414593 Jy
! Component: 200  -  total flux cleaned = -0.000560514 Jy
! Total flux subtracted in 200 components = -0.000560514 Jy
! Clean residual min=-0.003969 max=0.004375 Jy/beam
! Clean residual mean=-0.000002 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.301213 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 48 components and 0.301213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062879Jy  sigma=1.192609
! Fit after  self-cal, rms=0.062843Jy  sigma=1.192032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301456 Jy
! Component: 100  -  total flux cleaned = 0.000168448 Jy
! Component: 150  -  total flux cleaned = 4.95197e-05 Jy
! Component: 200  -  total flux cleaned = -2.02994e-05 Jy
! Total flux subtracted in 200 components = -2.02994e-05 Jy
! Clean residual min=-0.003741 max=0.004284 Jy/beam
! Clean residual mean=-0.000002 rms=0.001008 Jy/beam
! Combined flux in latest and established models = 0.301193 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 56 components and 0.301193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062908Jy  sigma=1.193304
! Fit after  self-cal, rms=0.062892Jy  sigma=1.193050
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7997 mas, bmaj=1.964 mas, bpa=-1.503 degrees
! Estimated noise=0.680822 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7997 x 1.964 at -1.503 degrees (North through East)
! Clean map  min=-0.0029828  max=0.24335 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6545 mas, bmaj=1.673 mas, bpa=-0.4718 degrees
! Estimated noise=0.93868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180867 Jy
! Component: 100  -  total flux cleaned = 0.238406 Jy
! Component: 150  -  total flux cleaned = 0.263685 Jy
! Component: 200  -  total flux cleaned = 0.277889 Jy
! Total flux subtracted in 200 components = 0.277889 Jy
! Clean residual min=-0.006143 max=0.007701 Jy/beam
! Clean residual mean=0.000000 rms=0.001537 Jy/beam
! Combined flux in latest and established models = 0.277889 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.277889 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7997 mas, bmaj=1.964 mas, bpa=-1.503 degrees
! Estimated noise=0.680822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114317 Jy
! Component: 100  -  total flux cleaned = 0.0173531 Jy
! Component: 150  -  total flux cleaned = 0.0206941 Jy
! Component: 200  -  total flux cleaned = 0.0221752 Jy
! Total flux subtracted in 200 components = 0.0221752 Jy
! Clean residual min=-0.003558 max=0.003437 Jy/beam
! Clean residual mean=-0.000001 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.300064 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 31 components and 0.300064 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=3.232 mas, bpa=-4.577 degrees
! Estimated noise=0.92323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185018 Jy
! Component: 100  -  total flux cleaned = 0.00185922 Jy
! Component: 150  -  total flux cleaned = 0.00186322 Jy
! Component: 200  -  total flux cleaned = 0.00177095 Jy
! Total flux subtracted in 200 components = 0.00177095 Jy
! Clean residual min=-0.004169 max=0.004342 Jy/beam
! Clean residual mean=-0.000002 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.301835 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.50641e-05 Jy
! Component: 100  -  total flux cleaned = -0.000106702 Jy
! Component: 150  -  total flux cleaned = -0.000154998 Jy
! Component: 200  -  total flux cleaned = -0.000219086 Jy
! Total flux subtracted in 200 components = -0.000219086 Jy
! Clean residual min=-0.004012 max=0.004303 Jy/beam
! Clean residual mean=-0.000002 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.301616 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.301616 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7997 mas, bmaj=1.964 mas, bpa=-1.503 degrees
! Estimated noise=0.680822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000203088 Jy
! Component: 100  -  total flux cleaned = -0.000279811 Jy
! Component: 150  -  total flux cleaned = -0.000188492 Jy
! Component: 200  -  total flux cleaned = -0.000109539 Jy
! Total flux subtracted in 200 components = -0.000109539 Jy
! Clean residual min=-0.003371 max=0.003061 Jy/beam
! Clean residual mean=-0.000001 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.301507 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 44 components and 0.301507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062844Jy  sigma=1.192458
! Fit after  self-cal, rms=0.062842Jy  sigma=1.192300
wmodel /J1133+0040_X_map.mod
! wmodel: Unable to open new model file: /J1133+0040_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1133+0040_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7997 x 1.964 at -1.503 degrees (North through East)
! Clean map  min=-0.0031676  max=0.24379 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1133+0040_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.243787 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000792965 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.97581 0.97581 1.95162 3.90324 7.80648 15.613 31.2259 62.4518
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.243 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  307.437 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1133+0040_X_dfm.log closed on Thu May 19 23:18:24 2016