! Started logfile: /scr/pima/bg219i_uvs/J1133+0015_X_dfm.log on Thu May 19 23:18:15 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1133+0015_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1133+0015_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.734127 visibilities/baseline/integration-bin.
! Found source: J1133+0015
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11100 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1133+0015_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028300Jy  sigma=24.322183
! Fit after  self-cal, rms=0.794830Jy  sigma=18.774555
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7056 mas, bmaj=1.752 mas, bpa=-5.905 degrees
! Estimated noise=0.456195 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148766 Jy
! Component: 100  -  total flux cleaned = 0.191116 Jy
! Total flux subtracted in 100 components = 0.191116 Jy
! Clean residual min=-0.008527 max=0.018445 Jy/beam
! Clean residual mean=-0.000006 rms=0.002025 Jy/beam
! Combined flux in latest and established models = 0.191116 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.191116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073746Jy  sigma=1.693572
! Fit after  self-cal, rms=0.073681Jy  sigma=1.691472
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209392 Jy
! Component: 100  -  total flux cleaned = 0.0330521 Jy
! Total flux subtracted in 100 components = 0.0330521 Jy
! Clean residual min=-0.004848 max=0.008341 Jy/beam
! Clean residual mean=-0.000002 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.224168 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.224168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064532Jy  sigma=1.463217
! Fit after  self-cal, rms=0.064532Jy  sigma=1.462777
! Inverting map 
! Added new window around map position (0.4, 4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00900991 Jy
! Component: 100  -  total flux cleaned = 0.0152827 Jy
! Total flux subtracted in 100 components = 0.0152827 Jy
! Clean residual min=-0.004126 max=0.004254 Jy/beam
! Clean residual mean=-0.000001 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.239451 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.239451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062530Jy  sigma=1.412360
! Fit after  self-cal, rms=0.062506Jy  sigma=1.411302
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9386 mas, bmaj=2.137 mas, bpa=-7.244 degrees
! Estimated noise=0.316876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793693 Jy
! Component: 100  -  total flux cleaned = 0.0132636 Jy
! Component: 150  -  total flux cleaned = 0.01705 Jy
! Component: 200  -  total flux cleaned = 0.0197896 Jy
! Total flux subtracted in 200 components = 0.0197896 Jy
! Clean residual min=-0.002895 max=0.003589 Jy/beam
! Clean residual mean=-0.000002 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.25924 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 48 components and 0.25924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061324Jy  sigma=1.379859
! Fit after  self-cal, rms=0.061277Jy  sigma=1.378526
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9386 x 2.137 at -7.244 degrees (North through East)
! Clean map  min=-0.00273  max=0.20549 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.95     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.96     KP        1.01     
!   LA        0.96     MK        1.02     NL        0.99     OV        0.96     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.03     KP        1.01     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.96     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.01     OV        0.96     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.00     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.03     SC        1.11     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.03     OV        0.95     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.91     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.03     OV        0.97     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.97     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.05     OV        0.97     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.03     KP        1.01     
!   LA        0.99     MK        1.05     NL        1.00     OV        0.96     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.96     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.061277Jy  sigma=1.378526
! Fit after  self-cal, rms=0.060959Jy  sigma=1.368169
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9438 mas, bmaj=2.153 mas, bpa=-7.274 degrees
! Estimated noise=0.315622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324077 Jy
! Component: 100  -  total flux cleaned = 0.00532902 Jy
! Component: 150  -  total flux cleaned = 0.00683474 Jy
! Component: 200  -  total flux cleaned = 0.00796262 Jy
! Total flux subtracted in 200 components = 0.00796262 Jy
! Clean residual min=-0.001994 max=0.002150 Jy/beam
! Clean residual mean=0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.267203 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 77 components and 0.267203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060743Jy  sigma=1.363276
! Fit after  self-cal, rms=0.060750Jy  sigma=1.363029
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060750Jy  sigma=1.363029
! Fit after  self-cal, rms=0.060713Jy  sigma=1.357221
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9455 mas, bmaj=2.153 mas, bpa=-7.241 degrees
! Estimated noise=0.315333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103518 Jy
! Component: 100  -  total flux cleaned = 0.00158263 Jy
! Component: 150  -  total flux cleaned = 0.00194867 Jy
! Component: 200  -  total flux cleaned = 0.00218158 Jy
! Total flux subtracted in 200 components = 0.00218158 Jy
! Clean residual min=-0.001916 max=0.001863 Jy/beam
! Clean residual mean=0.000001 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.269385 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.269384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060687Jy  sigma=1.356610
! Fit after  self-cal, rms=0.060696Jy  sigma=1.356544
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185817 Jy
! Component: 100  -  total flux cleaned = 0.000261796 Jy
! Component: 150  -  total flux cleaned = 0.000348945 Jy
! Component: 200  -  total flux cleaned = 0.00041462 Jy
! Total flux subtracted in 200 components = 0.00041462 Jy
! Clean residual min=-0.001916 max=0.001833 Jy/beam
! Clean residual mean=0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.269799 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 99 components and 0.269799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060685Jy  sigma=1.356330
! Fit after  self-cal, rms=0.060684Jy  sigma=1.356317
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060684Jy  sigma=1.356317
! Fit after  self-cal, rms=0.060683Jy  sigma=1.356246
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9454 mas, bmaj=2.153 mas, bpa=-7.255 degrees
! Estimated noise=0.315185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123368 Jy
! Component: 100  -  total flux cleaned = 0.00020841 Jy
! Component: 150  -  total flux cleaned = 0.000285452 Jy
! Component: 200  -  total flux cleaned = 0.000357822 Jy
! Total flux subtracted in 200 components = 0.000357822 Jy
! Clean residual min=-0.001895 max=0.001803 Jy/beam
! Clean residual mean=0.000000 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.270157 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 106 components and 0.270157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060674Jy  sigma=1.356059
! Fit after  self-cal, rms=0.060674Jy  sigma=1.356048
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.9906e-05 Jy
! Component: 100  -  total flux cleaned = 6.76171e-05 Jy
! Component: 150  -  total flux cleaned = 0.000121157 Jy
! Component: 200  -  total flux cleaned = 0.000159561 Jy
! Total flux subtracted in 200 components = 0.000159561 Jy
! Clean residual min=-0.001896 max=0.001781 Jy/beam
! Clean residual mean=0.000000 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.270316 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 112 components and 0.270316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060668Jy  sigma=1.355934
! Fit after  self-cal, rms=0.060667Jy  sigma=1.355927
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060667Jy  sigma=1.355927
! Fit after  self-cal, rms=0.060675Jy  sigma=1.355905
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.365 mas, bmaj=3.518 mas, bpa=4.521 degrees
! Estimated noise=0.39602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169582 Jy
! Component: 100  -  total flux cleaned = 0.000232633 Jy
! Component: 150  -  total flux cleaned = 0.000330905 Jy
! Component: 200  -  total flux cleaned = 0.000368255 Jy
! Total flux subtracted in 200 components = 0.000368255 Jy
! Clean residual min=-0.001873 max=0.001961 Jy/beam
! Clean residual mean=0.000000 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.270685 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 125 components and 0.270685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060674Jy  sigma=1.355841
! Fit after  self-cal, rms=0.060673Jy  sigma=1.355825
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.42147e-05 Jy
! Component: 100  -  total flux cleaned = -9.22597e-06 Jy
! Component: 150  -  total flux cleaned = 1.26635e-05 Jy
! Component: 200  -  total flux cleaned = 4.1882e-05 Jy
! Total flux subtracted in 200 components = 4.1882e-05 Jy
! Clean residual min=-0.001873 max=0.001970 Jy/beam
! Clean residual mean=0.000000 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.270727 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 130 components and 0.270727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060672Jy  sigma=1.355800
! Fit after  self-cal, rms=0.060671Jy  sigma=1.355787
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9453 mas, bmaj=2.153 mas, bpa=-7.266 degrees
! Estimated noise=0.315146 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9453 x 2.153 at -7.266 degrees (North through East)
! Clean map  min=-0.0018062  max=0.20503 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7102 mas, bmaj=1.761 mas, bpa=-5.937 degrees
! Estimated noise=0.456399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.148689 Jy
! Component: 100  -  total flux cleaned = 0.190578 Jy
! Component: 150  -  total flux cleaned = 0.210846 Jy
! Component: 200  -  total flux cleaned = 0.223205 Jy
! Total flux subtracted in 200 components = 0.223205 Jy
! Clean residual min=-0.004422 max=0.006791 Jy/beam
! Clean residual mean=-0.000003 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.223205 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.223205 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9453 mas, bmaj=2.153 mas, bpa=-7.266 degrees
! Estimated noise=0.315146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129547 Jy
! Component: 100  -  total flux cleaned = 0.0210077 Jy
! Component: 150  -  total flux cleaned = 0.026514 Jy
! Component: 200  -  total flux cleaned = 0.0304726 Jy
! Total flux subtracted in 200 components = 0.0304726 Jy
! Clean residual min=-0.002368 max=0.002522 Jy/beam
! Clean residual mean=-0.000003 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.253677 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 38 components and 0.253678 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.365 mas, bmaj=3.518 mas, bpa=4.521 degrees
! Estimated noise=0.39602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00466773 Jy
! Component: 100  -  total flux cleaned = 0.00789289 Jy
! Component: 150  -  total flux cleaned = 0.0102417 Jy
! Component: 200  -  total flux cleaned = 0.0119856 Jy
! Total flux subtracted in 200 components = 0.0119856 Jy
! Clean residual min=-0.002088 max=0.002132 Jy/beam
! Clean residual mean=-0.000001 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.265663 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131312 Jy
! Component: 100  -  total flux cleaned = 0.00232063 Jy
! Component: 150  -  total flux cleaned = 0.00301858 Jy
! Component: 200  -  total flux cleaned = 0.00340595 Jy
! Total flux subtracted in 200 components = 0.00340595 Jy
! Clean residual min=-0.001987 max=0.001907 Jy/beam
! Clean residual mean=-0.000000 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.269069 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 89 components and 0.269069 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9453 mas, bmaj=2.153 mas, bpa=-7.266 degrees
! Estimated noise=0.315146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265698 Jy
! Component: 100  -  total flux cleaned = 0.000362718 Jy
! Component: 150  -  total flux cleaned = 0.000447708 Jy
! Component: 200  -  total flux cleaned = 0.000561691 Jy
! Total flux subtracted in 200 components = 0.000561691 Jy
! Clean residual min=-0.002010 max=0.001900 Jy/beam
! Clean residual mean=-0.000000 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.269631 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 104 components and 0.269631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060743Jy  sigma=1.357645
! Fit after  self-cal, rms=0.060735Jy  sigma=1.357513
wmodel /J1133+0015_X_map.mod
! wmodel: Unable to open new model file: /J1133+0015_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1133+0015_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9453 x 2.153 at -7.266 degrees (North through East)
! Clean map  min=-0.0018771  max=0.205 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1133+0015_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.205003 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000425633 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.622867 0.622867 1.24573 2.49147 4.98294 9.96588 19.9318 39.8635 79.727
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.205 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  481.643 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1133+0015_X_dfm.log closed on Thu May 19 23:18:17 2016