! Started logfile: /scr/pima/bg219i_uvs/J1130+0846_X_dfm.log on Thu May 19 23:18:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1130+0846_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1130+0846_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.718254 visibilities/baseline/integration-bin.
! Found source: J1130+0846
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10860 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1130+0846_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031285Jy  sigma=24.950826
! Fit after  self-cal, rms=0.802377Jy  sigma=19.453897
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7191 mas, bmaj=1.732 mas, bpa=-7.583 degrees
! Estimated noise=0.472486 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150082 Jy
! Component: 100  -  total flux cleaned = 0.182879 Jy
! Total flux subtracted in 100 components = 0.182879 Jy
! Clean residual min=-0.010253 max=0.035437 Jy/beam
! Clean residual mean=0.000031 rms=0.003097 Jy/beam
! Combined flux in latest and established models = 0.182879 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.182879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082376Jy  sigma=1.964543
! Fit after  self-cal, rms=0.082319Jy  sigma=1.963420
! Inverting map 
! Added new window around map position (1.6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0298905 Jy
! Component: 100  -  total flux cleaned = 0.0428151 Jy
! Total flux subtracted in 100 components = 0.0428151 Jy
! Clean residual min=-0.009034 max=0.018765 Jy/beam
! Clean residual mean=0.000011 rms=0.001961 Jy/beam
! Combined flux in latest and established models = 0.225694 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.225694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069238Jy  sigma=1.630733
! Fit after  self-cal, rms=0.067008Jy  sigma=1.566586
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137723 Jy
! Component: 100  -  total flux cleaned = 0.0204077 Jy
! Total flux subtracted in 100 components = 0.0204077 Jy
! Clean residual min=-0.006281 max=0.008733 Jy/beam
! Clean residual mean=0.000003 rms=0.001241 Jy/beam
! Combined flux in latest and established models = 0.246102 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 23 components and 0.246102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063466Jy  sigma=1.472367
! Fit after  self-cal, rms=0.062877Jy  sigma=1.454850
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558279 Jy
! Component: 100  -  total flux cleaned = 0.00744513 Jy
! Total flux subtracted in 100 components = 0.00744513 Jy
! Clean residual min=-0.004677 max=0.004898 Jy/beam
! Clean residual mean=0.000000 rms=0.000970 Jy/beam
! Combined flux in latest and established models = 0.253547 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 33 components and 0.253547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061912Jy  sigma=1.427876
! Fit after  self-cal, rms=0.061772Jy  sigma=1.423559
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9201 mas, bmaj=2.054 mas, bpa=-4.688 degrees
! Estimated noise=0.312882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00617832 Jy
! Component: 100  -  total flux cleaned = 0.00810365 Jy
! Component: 150  -  total flux cleaned = 0.00892186 Jy
! Component: 200  -  total flux cleaned = 0.00942255 Jy
! Total flux subtracted in 200 components = 0.00942255 Jy
! Clean residual min=-0.003330 max=0.004205 Jy/beam
! Clean residual mean=0.000006 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.26297 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 46 components and 0.26297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061141Jy  sigma=1.405921
! Fit after  self-cal, rms=0.061050Jy  sigma=1.403126
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9201 x 2.054 at -4.688 degrees (North through East)
! Clean map  min=-0.0029819  max=0.18016 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.13     KP        0.98     
!   LA        1.00     MK        1.06     NL        1.03     OV        0.97     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.11     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.05     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.05     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.07     KP        1.01     
!   LA        0.99     MK        1.00     NL        1.02     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.06     OV        0.99     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.10     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.10     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.95     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.07     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.03     OV        0.94     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.99     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.03     OV        0.98     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.04     KP        0.97     
!   LA        0.98     MK        1.05     NL        1.04     OV        0.98     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.03     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.061050Jy  sigma=1.403126
! Fit after  self-cal, rms=0.061437Jy  sigma=1.391805
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.925 mas, bmaj=2.061 mas, bpa=-4.505 degrees
! Estimated noise=0.31501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112023 Jy
! Component: 100  -  total flux cleaned = 0.000860343 Jy
! Component: 150  -  total flux cleaned = 0.000713821 Jy
! Component: 200  -  total flux cleaned = 0.000714956 Jy
! Total flux subtracted in 200 components = 0.000714956 Jy
! Clean residual min=-0.002702 max=0.002840 Jy/beam
! Clean residual mean=0.000007 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.263685 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 57 components and 0.263685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061315Jy  sigma=1.388595
! Fit after  self-cal, rms=0.061324Jy  sigma=1.387609
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061324Jy  sigma=1.387609
! Fit after  self-cal, rms=0.061314Jy  sigma=1.380391
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9256 mas, bmaj=2.061 mas, bpa=-4.564 degrees
! Estimated noise=0.315865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000453107 Jy
! Component: 100  -  total flux cleaned = 0.000486151 Jy
! Component: 150  -  total flux cleaned = 0.00042815 Jy
! Component: 200  -  total flux cleaned = 0.000405583 Jy
! Total flux subtracted in 200 components = 0.000405583 Jy
! Clean residual min=-0.002282 max=0.002402 Jy/beam
! Clean residual mean=0.000005 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.26409 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.26409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061269Jy  sigma=1.379464
! Fit after  self-cal, rms=0.061233Jy  sigma=1.378880
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.2, 26).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215477 Jy
! Component: 100  -  total flux cleaned = 0.0031168 Jy
! Component: 150  -  total flux cleaned = 0.00334545 Jy
! Component: 200  -  total flux cleaned = 0.00353626 Jy
! Total flux subtracted in 200 components = 0.00353626 Jy
! Clean residual min=-0.002111 max=0.001890 Jy/beam
! Clean residual mean=0.000006 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.267626 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 76 components and 0.267626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061150Jy  sigma=1.376990
! Fit after  self-cal, rms=0.061146Jy  sigma=1.376888
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061146Jy  sigma=1.376888
! Fit after  self-cal, rms=0.061168Jy  sigma=1.376725
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9248 mas, bmaj=2.062 mas, bpa=-4.577 degrees
! Estimated noise=0.316004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513472 Jy
! Component: 100  -  total flux cleaned = 0.000782129 Jy
! Component: 150  -  total flux cleaned = 0.000937208 Jy
! Component: 200  -  total flux cleaned = 0.000977228 Jy
! Total flux subtracted in 200 components = 0.000977228 Jy
! Clean residual min=-0.002010 max=0.001964 Jy/beam
! Clean residual mean=0.000006 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.268604 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.268604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061147Jy  sigma=1.376265
! Fit after  self-cal, rms=0.061146Jy  sigma=1.376207
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.97374e-05 Jy
! Component: 100  -  total flux cleaned = 0.000106526 Jy
! Component: 150  -  total flux cleaned = 0.000124704 Jy
! Component: 200  -  total flux cleaned = 0.000125311 Jy
! Total flux subtracted in 200 components = 0.000125311 Jy
! Clean residual min=-0.002016 max=0.001963 Jy/beam
! Clean residual mean=0.000006 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.268729 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 94 components and 0.268729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061134Jy  sigma=1.375967
! Fit after  self-cal, rms=0.061133Jy  sigma=1.375934
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061133Jy  sigma=1.375934
! Fit after  self-cal, rms=0.061154Jy  sigma=1.375870
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.36 mas, bmaj=3.225 mas, bpa=7.126 degrees
! Estimated noise=0.392785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134358 Jy
! Component: 100  -  total flux cleaned = 3.30652e-05 Jy
! Component: 150  -  total flux cleaned = -6.45034e-05 Jy
! Component: 200  -  total flux cleaned = -0.000125249 Jy
! Total flux subtracted in 200 components = -0.000125249 Jy
! Clean residual min=-0.002293 max=0.002168 Jy/beam
! Clean residual mean=0.000012 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.268604 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 0.268604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061148Jy  sigma=1.375705
! Fit after  self-cal, rms=0.061147Jy  sigma=1.375666
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.33841e-05 Jy
! Component: 100  -  total flux cleaned = -2.14596e-05 Jy
! Component: 150  -  total flux cleaned = -4.18255e-05 Jy
! Component: 200  -  total flux cleaned = -7.04131e-05 Jy
! Total flux subtracted in 200 components = -7.04131e-05 Jy
! Clean residual min=-0.002267 max=0.002177 Jy/beam
! Clean residual mean=0.000012 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.268533 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 110 components and 0.268533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061145Jy  sigma=1.375614
! Fit after  self-cal, rms=0.061144Jy  sigma=1.375592
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9243 mas, bmaj=2.063 mas, bpa=-4.6 degrees
! Estimated noise=0.316046 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9243 x 2.063 at -4.6 degrees (North through East)
! Clean map  min=-0.0018428  max=0.17893 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7212 mas, bmaj=1.735 mas, bpa=-7.458 degrees
! Estimated noise=0.480625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153457 Jy
! Component: 100  -  total flux cleaned = 0.203626 Jy
! Component: 150  -  total flux cleaned = 0.224959 Jy
! Component: 200  -  total flux cleaned = 0.237654 Jy
! Total flux subtracted in 200 components = 0.237654 Jy
! Clean residual min=-0.004161 max=0.006711 Jy/beam
! Clean residual mean=0.000009 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.237654 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.237654 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9243 mas, bmaj=2.063 mas, bpa=-4.6 degrees
! Estimated noise=0.316046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120171 Jy
! Component: 100  -  total flux cleaned = 0.018624 Jy
! Component: 150  -  total flux cleaned = 0.0225503 Jy
! Component: 200  -  total flux cleaned = 0.0252173 Jy
! Total flux subtracted in 200 components = 0.0252173 Jy
! Clean residual min=-0.002207 max=0.002288 Jy/beam
! Clean residual mean=0.000008 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.262871 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 48 components and 0.262871 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.36 mas, bmaj=3.225 mas, bpa=7.126 degrees
! Estimated noise=0.392785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229672 Jy
! Component: 100  -  total flux cleaned = 0.00365437 Jy
! Component: 150  -  total flux cleaned = 0.00437881 Jy
! Component: 200  -  total flux cleaned = 0.00478197 Jy
! Total flux subtracted in 200 components = 0.00478197 Jy
! Clean residual min=-0.002300 max=0.002276 Jy/beam
! Clean residual mean=0.000012 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.267653 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.83986e-05 Jy
! Component: 100  -  total flux cleaned = 0.000142794 Jy
! Component: 150  -  total flux cleaned = 0.000204158 Jy
! Component: 200  -  total flux cleaned = 0.000222539 Jy
! Total flux subtracted in 200 components = 0.000222539 Jy
! Clean residual min=-0.002268 max=0.002289 Jy/beam
! Clean residual mean=0.000012 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.267876 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 79 components and 0.267876 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9243 mas, bmaj=2.063 mas, bpa=-4.6 degrees
! Estimated noise=0.316046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.06066e-05 Jy
! Component: 100  -  total flux cleaned = 0.000285883 Jy
! Component: 150  -  total flux cleaned = 0.000380967 Jy
! Component: 200  -  total flux cleaned = 0.00040948 Jy
! Total flux subtracted in 200 components = 0.00040948 Jy
! Clean residual min=-0.001957 max=0.002177 Jy/beam
! Clean residual mean=0.000006 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.268285 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 90 components and 0.268285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061209Jy  sigma=1.377038
! Fit after  self-cal, rms=0.061198Jy  sigma=1.376626
wmodel /J1130+0846_X_map.mod
! wmodel: Unable to open new model file: /J1130+0846_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1130+0846_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9243 x 2.063 at -4.6 degrees (North through East)
! Clean map  min=-0.0019248  max=0.17713 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1130+0846_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.17713 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000472927 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.800981 0.800981 1.60196 3.20393 6.40785 12.8157 25.6314 51.2628
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.177 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  374.54 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1130+0846_X_dfm.log closed on Thu May 19 23:18:10 2016