! Started logfile: /scr/pima/bg219i_uvs/J1112+3503_X_uvs.log on Wed Apr  6 23:42:10 2016
obs /scr/pima/bg219i_uvs/J1112+3503_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1112+3503_X_uva.fits
! AN table 1: 31 integrations on 28 of 28 possible baselines.
! AN table 2: 30 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.879363 visibilities/baseline/integration-bin.
! Found source: J1112+3503
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20556 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1112+3503_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.012499Jy  sigma=25.483242
! Fit after  self-cal, rms=0.866256Jy  sigma=21.759732
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9413 mas, bmaj=1.074 mas, bpa=27.56 degrees
! Estimated noise=0.607596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100851 Jy
! Component: 100  -  total flux cleaned = 0.123695 Jy
! Total flux subtracted in 100 components = 0.123695 Jy
! Clean residual min=-0.006124 max=0.008895 Jy/beam
! Clean residual mean=-0.000016 rms=0.001485 Jy/beam
! Combined flux in latest and established models = 0.123695 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.123695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058017Jy  sigma=1.408082
! Fit after  self-cal, rms=0.057970Jy  sigma=1.406981
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.259 mas, bmaj=1.396 mas, bpa=20.54 degrees
! Estimated noise=0.276873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130016 Jy
! Component: 100  -  total flux cleaned = 0.0184036 Jy
! Component: 150  -  total flux cleaned = 0.021193 Jy
! Component: 200  -  total flux cleaned = 0.0227548 Jy
! Total flux subtracted in 200 components = 0.0227548 Jy
! Clean residual min=-0.002441 max=0.003063 Jy/beam
! Clean residual mean=-0.000006 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.146449 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 23 components and 0.146449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055519Jy  sigma=1.335859
! Fit after  self-cal, rms=0.055498Jy  sigma=1.335190
! Inverting map 
! Added new window around map position (-0.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310851 Jy
! Component: 100  -  total flux cleaned = 0.00402317 Jy
! Component: 150  -  total flux cleaned = 0.00406056 Jy
! Component: 200  -  total flux cleaned = 0.00405986 Jy
! Total flux subtracted in 200 components = 0.00405986 Jy
! Clean residual min=-0.002017 max=0.002180 Jy/beam
! Clean residual mean=-0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.150509 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.150509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055338Jy  sigma=1.330980
! Fit after  self-cal, rms=0.055311Jy  sigma=1.330338
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.259 x 1.396 at 20.54 degrees (North through East)
! Clean map  min=-0.0018226  max=0.13359 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     KP        1.00     LA        1.01     
!   MK        1.02     NL        0.98     OV        1.01     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.98     
!   LA        1.00     MK        1.12     OV        1.00     PT        1.04     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     KP        1.01     LA        1.00     
!   MK        1.02     NL        0.99     OV        0.98     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        0.98     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.08     OV        0.97     PT        1.08     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     KP        1.03     LA        1.01     
!   MK        0.97     NL        1.07     OV        0.97     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.03     HN        0.98     KP        1.03     
!   LA        0.95     MK        1.13     OV        0.92     PT        1.05     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        1.01     LA        0.97     
!   MK        0.97     NL        1.03     OV        0.96     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.98     HN        0.97     KP        1.01     
!   LA        0.97     MK        1.01     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     KP        1.03     LA        1.02     
!   MK        1.01     NL        1.01     OV        0.99     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.03     HN        0.99     KP        1.03     
!   LA        0.96     MK        1.06     OV        0.95     PT        1.04     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     KP        1.02     LA        0.98     
!   MK        1.02     NL        0.98     OV        1.00     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.03     
!   LA        1.02     MK        1.04     OV        0.93     PT        1.05     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     KP        1.04     LA        1.05     
!   MK        1.01     NL        1.03     OV        0.96     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.99     HN        0.97     KP        1.01     
!   LA        0.99     MK        1.04     OV        0.97     PT        1.07     
!   SC        0.99     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055311Jy  sigma=1.330338
! Fit after  self-cal, rms=0.055659Jy  sigma=1.321625
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=1.397 mas, bpa=20.9 degrees
! Estimated noise=0.277438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.4, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173745 Jy
! Component: 100  -  total flux cleaned = 0.00204826 Jy
! Component: 150  -  total flux cleaned = 0.00222442 Jy
! Component: 200  -  total flux cleaned = 0.00237267 Jy
! Total flux subtracted in 200 components = 0.00237267 Jy
! Clean residual min=-0.001300 max=0.001524 Jy/beam
! Clean residual mean=0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.152882 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 58 components and 0.152882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055579Jy  sigma=1.319689
! Fit after  self-cal, rms=0.055614Jy  sigma=1.319522
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055614Jy  sigma=1.319522
! Fit after  self-cal, rms=0.055584Jy  sigma=1.319470
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=1.395 mas, bpa=20.8 degrees
! Estimated noise=0.277163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202171 Jy
! Component: 100  -  total flux cleaned = 0.000282932 Jy
! Component: 150  -  total flux cleaned = 0.000378104 Jy
! Component: 200  -  total flux cleaned = 0.000463867 Jy
! Total flux subtracted in 200 components = 0.000463867 Jy
! Clean residual min=-0.001274 max=0.001417 Jy/beam
! Clean residual mean=0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.153346 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 65 components and 0.153346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055563Jy  sigma=1.318986
! Fit after  self-cal, rms=0.055563Jy  sigma=1.318964
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (32.2, 23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129212 Jy
! Component: 100  -  total flux cleaned = 0.00163721 Jy
! Component: 150  -  total flux cleaned = 0.00189349 Jy
! Component: 200  -  total flux cleaned = 0.00203759 Jy
! Total flux subtracted in 200 components = 0.00203759 Jy
! Clean residual min=-0.001286 max=0.001187 Jy/beam
! Clean residual mean=0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.155383 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.155383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055525Jy  sigma=1.318057
! Fit after  self-cal, rms=0.055522Jy  sigma=1.318003
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055522Jy  sigma=1.318003
! Fit after  self-cal, rms=0.055542Jy  sigma=1.317979
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=1.394 mas, bpa=20.76 degrees
! Estimated noise=0.277108 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307387 Jy
! Component: 100  -  total flux cleaned = 0.000403278 Jy
! Component: 150  -  total flux cleaned = 0.000474936 Jy
! Component: 200  -  total flux cleaned = 0.000508494 Jy
! Total flux subtracted in 200 components = 0.000508494 Jy
! Clean residual min=-0.001298 max=0.001205 Jy/beam
! Clean residual mean=0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.155892 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 89 components and 0.155892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055530Jy  sigma=1.317717
! Fit after  self-cal, rms=0.055530Jy  sigma=1.317709
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.70293e-05 Jy
! Component: 100  -  total flux cleaned = 4.90761e-05 Jy
! Component: 150  -  total flux cleaned = 9.53237e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109709 Jy
! Total flux subtracted in 200 components = 0.000109709 Jy
! Clean residual min=-0.001274 max=0.001206 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.156002 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 95 components and 0.156002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055522Jy  sigma=1.317526
! Fit after  self-cal, rms=0.055521Jy  sigma=1.317519
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055521Jy  sigma=1.317519
! Fit after  self-cal, rms=0.055520Jy  sigma=1.317516
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.534 mas, bmaj=2.964 mas, bpa=56.35 degrees
! Estimated noise=0.335359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.37137e-05 Jy
! Component: 100  -  total flux cleaned = 8.17366e-05 Jy
! Component: 150  -  total flux cleaned = 8.23498e-05 Jy
! Component: 200  -  total flux cleaned = 4.46949e-05 Jy
! Total flux subtracted in 200 components = 4.46949e-05 Jy
! Clean residual min=-0.001052 max=0.001178 Jy/beam
! Clean residual mean=0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.156046 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 107 components and 0.156046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055518Jy  sigma=1.317486
! Fit after  self-cal, rms=0.055518Jy  sigma=1.317480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.79052e-05 Jy
! Component: 100  -  total flux cleaned = -7.56912e-05 Jy
! Component: 150  -  total flux cleaned = -6.76723e-05 Jy
! Component: 200  -  total flux cleaned = -6.04419e-05 Jy
! Total flux subtracted in 200 components = -6.04419e-05 Jy
! Clean residual min=-0.001037 max=0.001170 Jy/beam
! Clean residual mean=0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.155986 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 112 components and 0.155986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055516Jy  sigma=1.317463
! Fit after  self-cal, rms=0.055516Jy  sigma=1.317459
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=1.394 mas, bpa=20.82 degrees
! Estimated noise=0.277058 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.26 x 1.394 at 20.82 degrees (North through East)
! Clean map  min=-0.0011776  max=0.13404 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9424 mas, bmaj=1.073 mas, bpa=28.16 degrees
! Estimated noise=0.610458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101243 Jy
! Component: 100  -  total flux cleaned = 0.12461 Jy
! Component: 150  -  total flux cleaned = 0.134846 Jy
! Component: 200  -  total flux cleaned = 0.14034 Jy
! Total flux subtracted in 200 components = 0.14034 Jy
! Clean residual min=-0.004529 max=0.004223 Jy/beam
! Clean residual mean=-0.000006 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.14034 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.14034 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=1.394 mas, bpa=20.82 degrees
! Estimated noise=0.277058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473621 Jy
! Component: 100  -  total flux cleaned = 0.00720562 Jy
! Component: 150  -  total flux cleaned = 0.00908048 Jy
! Component: 200  -  total flux cleaned = 0.010367 Jy
! Total flux subtracted in 200 components = 0.010367 Jy
! Clean residual min=-0.001563 max=0.001412 Jy/beam
! Clean residual mean=-0.000003 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.150707 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 36 components and 0.150707 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.534 mas, bmaj=2.964 mas, bpa=56.35 degrees
! Estimated noise=0.335359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153409 Jy
! Component: 100  -  total flux cleaned = 0.00254425 Jy
! Component: 150  -  total flux cleaned = 0.00331141 Jy
! Component: 200  -  total flux cleaned = 0.0038016 Jy
! Total flux subtracted in 200 components = 0.0038016 Jy
! Clean residual min=-0.001236 max=0.001217 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.154509 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229953 Jy
! Component: 100  -  total flux cleaned = 0.000343272 Jy
! Component: 150  -  total flux cleaned = 0.000479716 Jy
! Component: 200  -  total flux cleaned = 0.000587972 Jy
! Total flux subtracted in 200 components = 0.000587972 Jy
! Clean residual min=-0.001156 max=0.001179 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.155097 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 81 components and 0.155097 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.26 mas, bmaj=1.394 mas, bpa=20.82 degrees
! Estimated noise=0.277058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000215697 Jy
! Component: 100  -  total flux cleaned = 0.000305949 Jy
! Component: 150  -  total flux cleaned = 0.000471267 Jy
! Component: 200  -  total flux cleaned = 0.000619161 Jy
! Total flux subtracted in 200 components = 0.000619161 Jy
! Clean residual min=-0.001436 max=0.001235 Jy/beam
! Clean residual mean=0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.155716 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.155716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055555Jy  sigma=1.318266
! Fit after  self-cal, rms=0.055550Jy  sigma=1.318154
wmodel /scr/pima/bg219i_uvs/J1112+3503_X_map.mod
! Writing 96 model components to file: /scr/pima/bg219i_uvs/J1112+3503_X_map.mod
wobs /scr/pima/bg219i_uvs/J1112+3503_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1112+3503_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1112+3503_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219i_uvs/J1112+3503_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000524423 Jy
! Component: 100  -  total flux cleaned = -0.000634038 Jy
! Component: 150  -  total flux cleaned = -0.000759076 Jy
! Component: 200  -  total flux cleaned = -0.00079894 Jy
! Component: 250  -  total flux cleaned = -0.000818218 Jy
! Component: 300  -  total flux cleaned = -0.000892286 Jy
! Component: 350  -  total flux cleaned = -0.000910677 Jy
! Component: 400  -  total flux cleaned = -0.000945755 Jy
! Component: 450  -  total flux cleaned = -0.000928599 Jy
! Component: 500  -  total flux cleaned = -0.000978869 Jy
! Component: 550  -  total flux cleaned = -0.000962 Jy
! Component: 600  -  total flux cleaned = -0.000978106 Jy
! Component: 650  -  total flux cleaned = -0.00100977 Jy
! Component: 700  -  total flux cleaned = -0.000994557 Jy
! Component: 750  -  total flux cleaned = -0.00101007 Jy
! Component: 800  -  total flux cleaned = -0.00102534 Jy
! Component: 850  -  total flux cleaned = -0.0010837 Jy
! Component: 900  -  total flux cleaned = -0.00106931 Jy
! Component: 950  -  total flux cleaned = -0.00105517 Jy
! Component: 1000  -  total flux cleaned = -0.00105511 Jy
! Component: 1050  -  total flux cleaned = -0.00106881 Jy
! Component: 1100  -  total flux cleaned = -0.00105521 Jy
! Component: 1150  -  total flux cleaned = -0.00101538 Jy
! Component: 1200  -  total flux cleaned = -0.00101561 Jy
! Component: 1250  -  total flux cleaned = -0.00100275 Jy
! Component: 1300  -  total flux cleaned = -0.00104118 Jy
! Component: 1350  -  total flux cleaned = -0.00100348 Jy
! Component: 1400  -  total flux cleaned = -0.0010782 Jy
! Component: 1450  -  total flux cleaned = -0.00104121 Jy
! Component: 1500  -  total flux cleaned = -0.00105337 Jy
! Component: 1550  -  total flux cleaned = -0.00106526 Jy
! Component: 1600  -  total flux cleaned = -0.00105345 Jy
! Component: 1650  -  total flux cleaned = -0.00104167 Jy
! Component: 1700  -  total flux cleaned = -0.00104177 Jy
! Component: 1750  -  total flux cleaned = -0.00106477 Jy
! Component: 1800  -  total flux cleaned = -0.00108736 Jy
! Component: 1850  -  total flux cleaned = -0.00106493 Jy
! Component: 1900  -  total flux cleaned = -0.00107612 Jy
! Component: 1950  -  total flux cleaned = -0.00106516 Jy
! Component: 2000  -  total flux cleaned = -0.00104345 Jy
! Component: 2050  -  total flux cleaned = -0.00105433 Jy
! Component: 2100  -  total flux cleaned = -0.00103298 Jy
! Component: 2150  -  total flux cleaned = -0.00105411 Jy
! Component: 2200  -  total flux cleaned = -0.00104354 Jy
! Component: 2250  -  total flux cleaned = -0.00100187 Jy
! Component: 2300  -  total flux cleaned = -0.00102256 Jy
! Component: 2350  -  total flux cleaned = -0.00103275 Jy
! Component: 2400  -  total flux cleaned = -0.0010428 Jy
! Component: 2450  -  total flux cleaned = -0.0010528 Jy
! Component: 2500  -  total flux cleaned = -0.000982738 Jy
! Component: 2550  -  total flux cleaned = -0.00098272 Jy
! Component: 2600  -  total flux cleaned = -0.00100242 Jy
! Component: 2650  -  total flux cleaned = -0.00094355 Jy
! Component: 2700  -  total flux cleaned = -0.000962944 Jy
! Component: 2750  -  total flux cleaned = -0.000924335 Jy
! Component: 2800  -  total flux cleaned = -0.000905195 Jy
! Component: 2850  -  total flux cleaned = -0.00092431 Jy
! Component: 2900  -  total flux cleaned = -0.000905283 Jy
! Component: 2950  -  total flux cleaned = -0.000914747 Jy
! Component: 3000  -  total flux cleaned = -0.000905464 Jy
! Component: 3050  -  total flux cleaned = -0.000905443 Jy
! Component: 3100  -  total flux cleaned = -0.000905448 Jy
! Component: 3150  -  total flux cleaned = -0.00089618 Jy
! Component: 3200  -  total flux cleaned = -0.000887012 Jy
! Component: 3250  -  total flux cleaned = -0.000877979 Jy
! Component: 3300  -  total flux cleaned = -0.000859821 Jy
! Component: 3350  -  total flux cleaned = -0.000868848 Jy
! Component: 3400  -  total flux cleaned = -0.000850939 Jy
! Component: 3450  -  total flux cleaned = -0.000824324 Jy
! Component: 3500  -  total flux cleaned = -0.000833169 Jy
! Component: 3550  -  total flux cleaned = -0.000797996 Jy
! Component: 3600  -  total flux cleaned = -0.000833077 Jy
! Component: 3650  -  total flux cleaned = -0.000815636 Jy
! Component: 3700  -  total flux cleaned = -0.000815762 Jy
! Component: 3750  -  total flux cleaned = -0.000832984 Jy
! Component: 3800  -  total flux cleaned = -0.000824385 Jy
! Component: 3850  -  total flux cleaned = -0.00082432 Jy
! Component: 3900  -  total flux cleaned = -0.00083279 Jy
! Component: 3950  -  total flux cleaned = -0.00082433 Jy
! Component: 4000  -  total flux cleaned = -0.000790593 Jy
! Component: 4050  -  total flux cleaned = -0.000807356 Jy
! Total flux subtracted in 4096 components = -0.000799001 Jy
! Clean residual min=-0.000470 max=0.000499 Jy/beam
! Clean residual mean=0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.154917 Jy
keep
! Adding 232 model components to the UV plane model.
! The established model now contains 328 components and 0.154917 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1112+3503_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.26 x 1.394 at 20.82 degrees (North through East)
! Clean map  min=-0.00097295  max=0.13429 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1112+3503_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.13429 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000129002 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.288186 0.288186 0.576372 1.15274 2.30549 4.61098 9.22196 18.4439 36.8878 73.7757
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.134 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1040.99 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1112+3503_X_uvs.log closed on Wed Apr  6 23:42:15 2016