! Started logfile: /scr/pima/bg219i_uvs/J1033+4116_S_dfm.log on Thu May 19 23:16:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1033+4116_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1033+4116_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.791667 visibilities/baseline/integration-bin.
! Found source: J1033+4116
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1596 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1033+4116_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.254886Jy  sigma=31.427112
! Fit after  self-cal, rms=0.297207Jy  sigma=7.455563
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.15 mas, bmaj=10.74 mas, bpa=37.97 degrees
! Estimated noise=0.936433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.545618 Jy
! Component: 100  -  total flux cleaned = 0.665372 Jy
! Total flux subtracted in 100 components = 0.665372 Jy
! Clean residual min=-0.015400 max=0.037302 Jy/beam
! Clean residual mean=-0.000114 rms=0.005081 Jy/beam
! Combined flux in latest and established models = 0.665372 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.665372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090266Jy  sigma=2.223935
! Fit after  self-cal, rms=0.090255Jy  sigma=2.223728
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0390057 Jy
! Component: 100  -  total flux cleaned = 0.062365 Jy
! Total flux subtracted in 100 components = 0.062365 Jy
! Clean residual min=-0.010072 max=0.014093 Jy/beam
! Clean residual mean=-0.000060 rms=0.002971 Jy/beam
! Combined flux in latest and established models = 0.727737 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 23 components and 0.727737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065702Jy  sigma=1.597760
! Fit after  self-cal, rms=0.065581Jy  sigma=1.595197
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.14 mas, bmaj=11.04 mas, bpa=37.83 degrees
! Estimated noise=0.728954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 10.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221914 Jy
! Component: 100  -  total flux cleaned = 0.0359733 Jy
! Component: 150  -  total flux cleaned = 0.0457549 Jy
! Component: 200  -  total flux cleaned = 0.0529986 Jy
! Total flux subtracted in 200 components = 0.0529986 Jy
! Clean residual min=-0.007745 max=0.006163 Jy/beam
! Clean residual mean=-0.000051 rms=0.001801 Jy/beam
! Combined flux in latest and established models = 0.780736 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 84 components and 0.780736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056398Jy  sigma=1.356458
! Fit after  self-cal, rms=0.055789Jy  sigma=1.342437
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.14 x 11.04 at 37.83 degrees (North through East)
! Clean map  min=-0.0057518  max=0.6998 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     KP        0.98     LA        1.00     
!   MK        1.05     NL        1.00     OV        1.01     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     KP        1.00     LA        0.99     
!   MK        1.03     NL        1.00     OV        1.00     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     KP        0.99     LA        0.99     
!   MK        1.03     NL        1.02     OV        1.01     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     KP        0.97     LA        0.98     
!   MK        1.02     NL        0.99     OV        0.99     PT        0.99     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.055789Jy  sigma=1.342437
! Fit after  self-cal, rms=0.053776Jy  sigma=1.289198
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.162 mas, bmaj=11.05 mas, bpa=37.94 degrees
! Estimated noise=0.725275 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00470411 Jy
! Component: 100  -  total flux cleaned = 0.00569693 Jy
! Component: 150  -  total flux cleaned = 0.00623356 Jy
! Component: 200  -  total flux cleaned = 0.00679626 Jy
! Total flux subtracted in 200 components = 0.00679626 Jy
! Clean residual min=-0.004740 max=0.004926 Jy/beam
! Clean residual mean=-0.000025 rms=0.001161 Jy/beam
! Combined flux in latest and established models = 0.787532 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 114 components and 0.787532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052903Jy  sigma=1.265667
! Fit after  self-cal, rms=0.052795Jy  sigma=1.263698
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052795Jy  sigma=1.263698
! Fit after  self-cal, rms=0.051287Jy  sigma=1.226885
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.161 mas, bmaj=11.06 mas, bpa=37.93 degrees
! Estimated noise=0.725305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000321287 Jy
! Component: 100  -  total flux cleaned = 0.000381347 Jy
! Component: 150  -  total flux cleaned = 0.000531959 Jy
! Component: 200  -  total flux cleaned = 0.000465983 Jy
! Total flux subtracted in 200 components = 0.000465983 Jy
! Clean residual min=-0.003481 max=0.003072 Jy/beam
! Clean residual mean=-0.000004 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.787998 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 138 components and 0.787998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051025Jy  sigma=1.220330
! Fit after  self-cal, rms=0.051004Jy  sigma=1.219933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330735 Jy
! Component: 100  -  total flux cleaned = 0.000449725 Jy
! Component: 150  -  total flux cleaned = 0.000501359 Jy
! Component: 200  -  total flux cleaned = 0.000502805 Jy
! Total flux subtracted in 200 components = 0.000502805 Jy
! Clean residual min=-0.003565 max=0.002893 Jy/beam
! Clean residual mean=-0.000005 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.788501 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 159 components and 0.788501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050893Jy  sigma=1.217131
! Fit after  self-cal, rms=0.050886Jy  sigma=1.217018
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050886Jy  sigma=1.217018
! Fit after  self-cal, rms=0.050878Jy  sigma=1.216623
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.162 mas, bmaj=11.06 mas, bpa=37.94 degrees
! Estimated noise=0.724885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000490039 Jy
! Component: 100  -  total flux cleaned = -0.000391511 Jy
! Component: 150  -  total flux cleaned = -0.000433929 Jy
! Component: 200  -  total flux cleaned = -0.000434565 Jy
! Total flux subtracted in 200 components = -0.000434565 Jy
! Clean residual min=-0.003530 max=0.002710 Jy/beam
! Clean residual mean=-0.000007 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.788066 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 180 components and 0.788066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050789Jy  sigma=1.214881
! Fit after  self-cal, rms=0.050785Jy  sigma=1.214822
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.96126e-05 Jy
! Component: 100  -  total flux cleaned = 3.06399e-05 Jy
! Component: 150  -  total flux cleaned = 3.13411e-05 Jy
! Component: 200  -  total flux cleaned = -6.13913e-07 Jy
! Total flux subtracted in 200 components = -6.13913e-07 Jy
! Clean residual min=-0.003537 max=0.002626 Jy/beam
! Clean residual mean=-0.000007 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.788066 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 197 components and 0.788066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050741Jy  sigma=1.213756
! Fit after  self-cal, rms=0.050738Jy  sigma=1.213735
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050738Jy  sigma=1.213735
! Fit after  self-cal, rms=0.050736Jy  sigma=1.213407
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.749 mas, bmaj=11.85 mas, bpa=40.87 degrees
! Estimated noise=0.825554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00135244 Jy
! Component: 100  -  total flux cleaned = -0.00160897 Jy
! Component: 150  -  total flux cleaned = -0.00178395 Jy
! Component: 200  -  total flux cleaned = -0.00184139 Jy
! Total flux subtracted in 200 components = -0.00184139 Jy
! Clean residual min=-0.002771 max=0.002510 Jy/beam
! Clean residual mean=-0.000015 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.786224 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 219 components and 0.786224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050693Jy  sigma=1.212884
! Fit after  self-cal, rms=0.050690Jy  sigma=1.212787
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139768 Jy
! Component: 100  -  total flux cleaned = 0.000113994 Jy
! Component: 150  -  total flux cleaned = 9.14634e-05 Jy
! Component: 200  -  total flux cleaned = 7.0296e-05 Jy
! Total flux subtracted in 200 components = 7.0296e-05 Jy
! Clean residual min=-0.002683 max=0.002486 Jy/beam
! Clean residual mean=-0.000015 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.786294 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 232 components and 0.786295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050675Jy  sigma=1.212539
! Fit after  self-cal, rms=0.050675Jy  sigma=1.212496
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.164 mas, bmaj=11.06 mas, bpa=37.96 degrees
! Estimated noise=0.724416 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.164 x 11.06 at 37.96 degrees (North through East)
! Clean map  min=-0.0047582  max=0.69659 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050675Jy  sigma=1.212496
! Fit after  self-cal, rms=0.044566Jy  sigma=1.063634
! Inverting map and beam 
! Estimated beam: bmin=4.167 mas, bmaj=11.06 mas, bpa=37.96 degrees
! Estimated noise=0.724934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170744 Jy
! Component: 100  -  total flux cleaned = -0.000137041 Jy
! Component: 150  -  total flux cleaned = -0.000195278 Jy
! Component: 200  -  total flux cleaned = -0.000222942 Jy
! Total flux subtracted in 200 components = -0.000222942 Jy
! Clean residual min=-0.003297 max=0.002662 Jy/beam
! Clean residual mean=-0.000009 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.786072 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 253 components and 0.786072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044526Jy  sigma=1.062713
! Fit after  self-cal, rms=0.044526Jy  sigma=1.062703
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.70737e-05 Jy
! Component: 100  -  total flux cleaned = -5.70454e-05 Jy
! Component: 150  -  total flux cleaned = -0.000105648 Jy
! Component: 200  -  total flux cleaned = -0.000105345 Jy
! Total flux subtracted in 200 components = -0.000105345 Jy
! Clean residual min=-0.003233 max=0.002644 Jy/beam
! Clean residual mean=-0.000009 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.785966 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 263 components and 0.785966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044501Jy  sigma=1.062140
! Fit after  self-cal, rms=0.044500Jy  sigma=1.062135
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044500Jy  sigma=1.062135
! Fit after  self-cal, rms=0.044518Jy  sigma=1.062050
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=10.75 mas, bpa=38.07 degrees
! Estimated noise=0.933069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.543614 Jy
! Component: 100  -  total flux cleaned = 0.662577 Jy
! Component: 150  -  total flux cleaned = 0.699996 Jy
! Component: 200  -  total flux cleaned = 0.722028 Jy
! Total flux subtracted in 200 components = 0.722028 Jy
! Clean residual min=-0.007950 max=0.012033 Jy/beam
! Clean residual mean=-0.000050 rms=0.002387 Jy/beam
! Combined flux in latest and established models = 0.722028 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.722028 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.167 mas, bmaj=11.06 mas, bpa=37.97 degrees
! Estimated noise=0.725077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205972 Jy
! Component: 100  -  total flux cleaned = 0.0336747 Jy
! Component: 150  -  total flux cleaned = 0.0424734 Jy
! Component: 200  -  total flux cleaned = 0.0486471 Jy
! Total flux subtracted in 200 components = 0.0486471 Jy
! Clean residual min=-0.004076 max=0.004072 Jy/beam
! Clean residual mean=-0.000028 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.770675 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 84 components and 0.770675 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.753 mas, bmaj=11.86 mas, bpa=40.92 degrees
! Estimated noise=0.825849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00605041 Jy
! Component: 100  -  total flux cleaned = 0.00993896 Jy
! Component: 150  -  total flux cleaned = 0.0116636 Jy
! Component: 200  -  total flux cleaned = 0.0126867 Jy
! Total flux subtracted in 200 components = 0.0126867 Jy
! Clean residual min=-0.003434 max=0.003095 Jy/beam
! Clean residual mean=-0.000021 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.783362 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396592 Jy
! Component: 100  -  total flux cleaned = 0.000814874 Jy
! Component: 150  -  total flux cleaned = 0.0010652 Jy
! Component: 200  -  total flux cleaned = 0.00123043 Jy
! Total flux subtracted in 200 components = 0.00123043 Jy
! Clean residual min=-0.003094 max=0.002887 Jy/beam
! Clean residual mean=-0.000018 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.784592 Jy
! Adding 129 model components to the UV plane model.
! The established model now contains 206 components and 0.784592 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.167 mas, bmaj=11.06 mas, bpa=37.97 degrees
! Estimated noise=0.725077 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115797 Jy
! Component: 100  -  total flux cleaned = 0.00146811 Jy
! Component: 150  -  total flux cleaned = 0.0015832 Jy
! Component: 200  -  total flux cleaned = 0.00168496 Jy
! Total flux subtracted in 200 components = 0.00168496 Jy
! Clean residual min=-0.003408 max=0.002892 Jy/beam
! Clean residual mean=-0.000008 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.786277 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 224 components and 0.786277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044753Jy  sigma=1.068521
! Fit after  self-cal, rms=0.044745Jy  sigma=1.068251
wmodel /J1033+4116_S_map.mod
! wmodel: Unable to open new model file: /J1033+4116_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1033+4116_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.167 x 11.06 at 37.97 degrees (North through East)
! Clean map  min=-0.003754  max=0.69878 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1033+4116_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.698784 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000803421 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.344922 0.344922 0.689845 1.37969 2.75938 5.51876 11.0375 22.075 44.1501 88.3001
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.698 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  869.76 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1033+4116_S_dfm.log closed on Thu May 19 23:16:16 2016