! Started logfile: /scr/pima/bg219i_uvs/J1032-1400_X_dfm.log on Thu May 19 23:16:09 2016 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /scr/pima/bg219i_uvs/J1032-1400_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J1032-1400_X_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.806481 visibilities/baseline/integration-bin. ! Found source: J1032-1400 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31356 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1032-1400_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007931Jy sigma=21.765053 ! Fit after self-cal, rms=0.908618Jy sigma=19.578203 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.61 mas, bmaj=1.624 mas, bpa=-3.075 degrees ! Estimated noise=0.437036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0682702 Jy ! Component: 100 - total flux cleaned = 0.0880502 Jy ! Total flux subtracted in 100 components = 0.0880502 Jy ! Clean residual min=-0.004672 max=0.009341 Jy/beam ! Clean residual mean=-0.000001 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.0880502 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0880502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073659Jy sigma=1.433756 ! Fit after self-cal, rms=0.073181Jy sigma=1.424487 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100927 Jy ! Component: 100 - total flux cleaned = 0.0151544 Jy ! Total flux subtracted in 100 components = 0.0151544 Jy ! Clean residual min=-0.003574 max=0.006188 Jy/beam ! Clean residual mean=0.000000 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.103205 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.103205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071458Jy sigma=1.377448 ! Fit after self-cal, rms=0.071452Jy sigma=1.377107 ! Inverting map ! Added new window around map position (0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570253 Jy ! Component: 100 - total flux cleaned = 0.00763528 Jy ! Total flux subtracted in 100 components = 0.00763528 Jy ! Clean residual min=-0.003317 max=0.003813 Jy/beam ! Clean residual mean=0.000001 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.11084 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 15 components and 0.11084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071082Jy sigma=1.366443 ! Fit after self-cal, rms=0.071058Jy sigma=1.365679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8068 mas, bmaj=2.015 mas, bpa=-4.327 degrees ! Estimated noise=0.204687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307033 Jy ! Component: 100 - total flux cleaned = 0.00471269 Jy ! Component: 150 - total flux cleaned = 0.00512759 Jy ! Component: 200 - total flux cleaned = 0.00523934 Jy ! Total flux subtracted in 200 components = 0.00523934 Jy ! Clean residual min=-0.001785 max=0.001737 Jy/beam ! Clean residual mean=0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.116079 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.116079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070944Jy sigma=1.361981 ! Fit after self-cal, rms=0.070921Jy sigma=1.361576 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8068 x 2.015 at -4.327 degrees (North through East) ! Clean map min=-0.0016638 max=0.0938 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.02 KP 1.00 ! LA 0.98 MK 1.04 NL 1.00 OV 0.99 ! PT 1.12 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.97 KP 1.00 ! LA 0.99 MK 1.06 NL 1.01 OV 0.97 ! PT 1.10 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.00 KP 1.04 ! LA 0.98 MK 1.08 NL 1.03 OV 0.95 ! PT 1.17 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.02 KP 1.00 ! LA 0.95 MK 1.02 NL 1.03 OV 0.96 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.96 KP 1.01 ! LA 0.96 MK 1.03 NL 1.02 OV 0.95 ! PT 1.14 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.98 KP 0.99 ! LA 0.98 MK 0.99 NL 0.99 OV 0.93 ! PT 1.15 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.99 KP 0.97 ! LA 0.97 MK 1.06 NL 1.02 OV 0.98 ! PT 1.17 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.98 KP 1.03 ! LA 0.99 MK 1.04 NL 1.01 OV 0.96 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.96 KP 0.98 ! LA 0.98 MK 1.02 NL 1.03 OV 0.97 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.96 KP 0.99 ! LA 1.01 MK 0.99 NL 0.99 OV 0.97 ! PT 1.12 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.99 KP 0.99 ! LA 0.98 MK 1.00 NL 0.96 OV 0.95 ! PT 1.11 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.93 KP 0.96 ! LA 0.98 MK 0.97 NL 1.02 OV 0.97 ! PT 1.09 SC 0.98 ! ! ! Fit before self-cal, rms=0.070921Jy sigma=1.361576 ! Fit after self-cal, rms=0.072461Jy sigma=1.357053 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8084 mas, bmaj=2.013 mas, bpa=-3.964 degrees ! Estimated noise=0.205109 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141672 Jy ! Component: 100 - total flux cleaned = 0.0020343 Jy ! Component: 150 - total flux cleaned = 0.00214092 Jy ! Component: 200 - total flux cleaned = 0.00216395 Jy ! Total flux subtracted in 200 components = 0.00216395 Jy ! Clean residual min=-0.001418 max=0.001231 Jy/beam ! Clean residual mean=0.000000 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.118243 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.118243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072432Jy sigma=1.356232 ! Fit after self-cal, rms=0.072501Jy sigma=1.356025 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072501Jy sigma=1.356025 ! Fit after self-cal, rms=0.072884Jy sigma=1.353850 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8071 mas, bmaj=2.012 mas, bpa=-3.907 degrees ! Estimated noise=0.205206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864714 Jy ! Component: 100 - total flux cleaned = 0.000984332 Jy ! Component: 150 - total flux cleaned = 0.000985947 Jy ! Component: 200 - total flux cleaned = 0.000968064 Jy ! Total flux subtracted in 200 components = 0.000968064 Jy ! Clean residual min=-0.001211 max=0.001072 Jy/beam ! Clean residual mean=-0.000000 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.119211 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.119211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072872Jy sigma=1.353489 ! Fit after self-cal, rms=0.072889Jy sigma=1.353409 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252406 Jy ! Component: 100 - total flux cleaned = 0.000269325 Jy ! Component: 150 - total flux cleaned = 0.000269619 Jy ! Component: 200 - total flux cleaned = 0.000269577 Jy ! Total flux subtracted in 200 components = 0.000269577 Jy ! Clean residual min=-0.001208 max=0.001050 Jy/beam ! Clean residual mean=-0.000000 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.119481 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.119481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072883Jy sigma=1.353257 ! Fit after self-cal, rms=0.072881Jy sigma=1.353243 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072881Jy sigma=1.353243 ! Fit after self-cal, rms=0.073022Jy sigma=1.353138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8061 mas, bmaj=2.011 mas, bpa=-3.861 degrees ! Estimated noise=0.205104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00039363 Jy ! Component: 100 - total flux cleaned = 0.000470186 Jy ! Component: 150 - total flux cleaned = 0.000470468 Jy ! Component: 200 - total flux cleaned = 0.00048261 Jy ! Total flux subtracted in 200 components = 0.00048261 Jy ! Clean residual min=-0.001145 max=0.001046 Jy/beam ! Clean residual mean=-0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.119963 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.119963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073018Jy sigma=1.353002 ! Fit after self-cal, rms=0.073019Jy sigma=1.352974 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158452 Jy ! Component: 100 - total flux cleaned = 0.000158235 Jy ! Component: 150 - total flux cleaned = 0.000147842 Jy ! Component: 200 - total flux cleaned = 0.000137947 Jy ! Total flux subtracted in 200 components = 0.000137947 Jy ! Clean residual min=-0.001139 max=0.001033 Jy/beam ! Clean residual mean=-0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.120101 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.120101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073016Jy sigma=1.352898 ! Fit after self-cal, rms=0.073014Jy sigma=1.352859 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073014Jy sigma=1.352859 ! Fit after self-cal, rms=0.073040Jy sigma=1.352848 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.074 mas, bmaj=3.935 mas, bpa=0.6794 degrees ! Estimated noise=0.274953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279441 Jy ! Component: 100 - total flux cleaned = 0.000386203 Jy ! Component: 150 - total flux cleaned = 0.000448893 Jy ! Component: 200 - total flux cleaned = 0.000495593 Jy ! Total flux subtracted in 200 components = 0.000495593 Jy ! Clean residual min=-0.001210 max=0.001072 Jy/beam ! Clean residual mean=-0.000002 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.120597 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.120597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073040Jy sigma=1.352851 ! Fit after self-cal, rms=0.073043Jy sigma=1.352834 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.99794e-05 Jy ! Component: 100 - total flux cleaned = 0.000122466 Jy ! Component: 150 - total flux cleaned = 0.0001515 Jy ! Component: 200 - total flux cleaned = 0.00016395 Jy ! Total flux subtracted in 200 components = 0.00016395 Jy ! Clean residual min=-0.001193 max=0.001077 Jy/beam ! Clean residual mean=-0.000002 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.120761 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.120761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073044Jy sigma=1.352841 ! Fit after self-cal, rms=0.073035Jy sigma=1.352608 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=2.01 mas, bpa=-3.84 degrees ! Estimated noise=0.205021 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8055 x 2.01 at -3.84 degrees (North through East) ! Clean map min=-0.0010248 max=0.093778 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.61 mas, bmaj=1.622 mas, bpa=-2.683 degrees ! Estimated noise=0.435649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0677723 Jy ! Component: 100 - total flux cleaned = 0.0885915 Jy ! Component: 150 - total flux cleaned = 0.0997854 Jy ! Component: 200 - total flux cleaned = 0.106186 Jy ! Total flux subtracted in 200 components = 0.106186 Jy ! Clean residual min=-0.003194 max=0.003455 Jy/beam ! Clean residual mean=0.000000 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.106186 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.106186 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=2.01 mas, bpa=-3.84 degrees ! Estimated noise=0.205021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536865 Jy ! Component: 100 - total flux cleaned = 0.00858214 Jy ! Component: 150 - total flux cleaned = 0.0107257 Jy ! Component: 200 - total flux cleaned = 0.0121824 Jy ! Total flux subtracted in 200 components = 0.0121824 Jy ! Clean residual min=-0.001254 max=0.001277 Jy/beam ! Clean residual mean=-0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.118369 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.118369 Jy ! Inverting map ! Added new window around map position (19, -28.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843237 Jy ! Component: 100 - total flux cleaned = 0.00123479 Jy ! Component: 150 - total flux cleaned = 0.00158403 Jy ! Component: 200 - total flux cleaned = 0.00178218 Jy ! Total flux subtracted in 200 components = 0.00178218 Jy ! Clean residual min=-0.001157 max=0.000996 Jy/beam ! Clean residual mean=-0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.120151 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 51 components and 0.120151 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.074 mas, bmaj=3.935 mas, bpa=0.6794 degrees ! Estimated noise=0.274953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062076 Jy ! Component: 100 - total flux cleaned = 0.000932886 Jy ! Component: 150 - total flux cleaned = 0.000981105 Jy ! Component: 200 - total flux cleaned = 0.000998292 Jy ! Total flux subtracted in 200 components = 0.000998292 Jy ! Clean residual min=-0.001196 max=0.001013 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.121149 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3414e-05 Jy ! Component: 100 - total flux cleaned = 4.50835e-05 Jy ! Component: 150 - total flux cleaned = 6.52551e-05 Jy ! Component: 200 - total flux cleaned = 8.39912e-05 Jy ! Total flux subtracted in 200 components = 8.39912e-05 Jy ! Clean residual min=-0.001202 max=0.001013 Jy/beam ! Clean residual mean=-0.000001 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.121233 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 0.121233 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=2.01 mas, bpa=-3.84 degrees ! Estimated noise=0.205021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169701 Jy ! Component: 100 - total flux cleaned = -0.000206162 Jy ! Component: 150 - total flux cleaned = -0.000256853 Jy ! Component: 200 - total flux cleaned = -0.000287918 Jy ! Total flux subtracted in 200 components = -0.000287918 Jy ! Clean residual min=-0.001122 max=0.001010 Jy/beam ! Clean residual mean=-0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.120945 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.120945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073024Jy sigma=1.352430 ! Fit after self-cal, rms=0.073023Jy sigma=1.352374 wmodel /J1032-1400_X_map.mod ! wmodel: Unable to open new model file: /J1032-1400_X_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219i_uvs/J1032-1400_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8055 x 2.01 at -3.84 degrees (North through East) ! Clean map min=-0.001014 max=0.09307 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1032-1400_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0930699 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000250974 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.808986 0.808986 1.61797 3.23594 6.47188 12.9438 25.8875 51.7751 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.093 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 370.834 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J1032-1400_X_dfm.log closed on Thu May 19 23:16:12 2016