! Started logfile: /scr/pima/bg219i_uvs/J1015-1952_S_dfm.log on Thu May 19 23:15:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J1015-1952_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1015-1952_S_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.922769 visibilities/baseline/integration-bin.
! Found source: J1015-1952
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 10132 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1015-1952_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007231Jy  sigma=20.172336
! Fit after  self-cal, rms=0.949026Jy  sigma=19.025736
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.894 mas, bmaj=6.736 mas, bpa=1.77 degrees
! Estimated noise=0.554243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415085 Jy
! Component: 100  -  total flux cleaned = 0.0514378 Jy
! Total flux subtracted in 100 components = 0.0514378 Jy
! Clean residual min=-0.003342 max=0.003767 Jy/beam
! Clean residual mean=0.000000 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.0514378 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0514378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071894Jy  sigma=1.385708
! Fit after  self-cal, rms=0.069148Jy  sigma=1.332701
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00623685 Jy
! Component: 100  -  total flux cleaned = 0.00893856 Jy
! Total flux subtracted in 100 components = 0.00893856 Jy
! Clean residual min=-0.002982 max=0.002913 Jy/beam
! Clean residual mean=0.000002 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.0603763 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.0603763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068660Jy  sigma=1.322818
! Fit after  self-cal, rms=0.068607Jy  sigma=1.322232
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.472 mas, bmaj=8.168 mas, bpa=0.3489 degrees
! Estimated noise=0.372038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175993 Jy
! Component: 100  -  total flux cleaned = 0.00223679 Jy
! Component: 150  -  total flux cleaned = 0.00228914 Jy
! Component: 200  -  total flux cleaned = 0.00231236 Jy
! Total flux subtracted in 200 components = 0.00231236 Jy
! Clean residual min=-0.002211 max=0.001915 Jy/beam
! Clean residual mean=-0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.0626887 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.0626887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068560Jy  sigma=1.321265
! Fit after  self-cal, rms=0.068548Jy  sigma=1.321189
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.472 x 8.168 at 0.3489 degrees (North through East)
! Clean map  min=-0.002113  max=0.056209 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.02     KP        0.98     
!   LA        1.01     MK        0.97     NL        0.95     OV        0.95     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.00     KP        1.00     
!   LA        1.04     MK        1.02     NL        0.99     OV        0.96     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.99     KP        1.02     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.10     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        1.01     KP        1.06     
!   LA        0.97     MK        0.99     NL        1.00     OV        1.01     
!   PT        1.04     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.068548Jy  sigma=1.321189
! Fit after  self-cal, rms=0.068624Jy  sigma=1.320091
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.468 mas, bmaj=8.158 mas, bpa=0.325 degrees
! Estimated noise=0.370105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.90594e-05 Jy
! Component: 100  -  total flux cleaned = 5.73019e-05 Jy
! Component: 150  -  total flux cleaned = 5.73409e-05 Jy
! Component: 200  -  total flux cleaned = 3.76486e-05 Jy
! Total flux subtracted in 200 components = 3.76486e-05 Jy
! Clean residual min=-0.002173 max=0.001904 Jy/beam
! Clean residual mean=-0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.0627263 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.0627263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068611Jy  sigma=1.319843
! Fit after  self-cal, rms=0.068637Jy  sigma=1.319714
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068637Jy  sigma=1.319714
! Fit after  self-cal, rms=0.068440Jy  sigma=1.318974
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.483 mas, bmaj=8.138 mas, bpa=0.4153 degrees
! Estimated noise=0.369866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000371454 Jy
! Component: 100  -  total flux cleaned = -0.000403795 Jy
! Component: 150  -  total flux cleaned = -0.000417775 Jy
! Component: 200  -  total flux cleaned = -0.000417596 Jy
! Total flux subtracted in 200 components = -0.000417596 Jy
! Clean residual min=-0.002105 max=0.001858 Jy/beam
! Clean residual mean=-0.000002 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.0623087 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 0.0623087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068433Jy  sigma=1.318849
! Fit after  self-cal, rms=0.068440Jy  sigma=1.318747
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.23596e-05 Jy
! Component: 100  -  total flux cleaned = -4.49288e-05 Jy
! Component: 150  -  total flux cleaned = -4.50404e-05 Jy
! Component: 200  -  total flux cleaned = -4.47675e-05 Jy
! Total flux subtracted in 200 components = -4.47675e-05 Jy
! Clean residual min=-0.002096 max=0.001843 Jy/beam
! Clean residual mean=-0.000002 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.062264 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.062264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068436Jy  sigma=1.318668
! Fit after  self-cal, rms=0.068436Jy  sigma=1.318661
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068436Jy  sigma=1.318661
! Fit after  self-cal, rms=0.068471Jy  sigma=1.318765
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.494 mas, bmaj=8.134 mas, bpa=0.7034 degrees
! Estimated noise=0.37007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159403 Jy
! Component: 100  -  total flux cleaned = -0.000198733 Jy
! Component: 150  -  total flux cleaned = -0.000210122 Jy
! Component: 200  -  total flux cleaned = -0.000230533 Jy
! Total flux subtracted in 200 components = -0.000230533 Jy
! Clean residual min=-0.002037 max=0.001866 Jy/beam
! Clean residual mean=-0.000003 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.0620334 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 52 components and 0.0620334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068468Jy  sigma=1.318668
! Fit after  self-cal, rms=0.068474Jy  sigma=1.318638
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.29119e-05 Jy
! Component: 100  -  total flux cleaned = -3.33909e-05 Jy
! Component: 150  -  total flux cleaned = -3.34836e-05 Jy
! Component: 200  -  total flux cleaned = -3.32986e-05 Jy
! Total flux subtracted in 200 components = -3.32986e-05 Jy
! Clean residual min=-0.002024 max=0.001841 Jy/beam
! Clean residual mean=-0.000003 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0620001 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 0.0620001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068471Jy  sigma=1.318584
! Fit after  self-cal, rms=0.068472Jy  sigma=1.318576
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068472Jy  sigma=1.318576
! Fit after  self-cal, rms=0.068557Jy  sigma=1.318616
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.368 mas, bmaj=15.99 mas, bpa=2.961 degrees
! Estimated noise=0.472718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202908 Jy
! Component: 100  -  total flux cleaned = 0.000221557 Jy
! Component: 150  -  total flux cleaned = 0.000229823 Jy
! Component: 200  -  total flux cleaned = 0.000229953 Jy
! Total flux subtracted in 200 components = 0.000229953 Jy
! Clean residual min=-0.001860 max=0.002056 Jy/beam
! Clean residual mean=-0.000006 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.0622301 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.0622301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068557Jy  sigma=1.318641
! Fit after  self-cal, rms=0.068554Jy  sigma=1.318625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.09579e-05 Jy
! Component: 100  -  total flux cleaned = 3.72402e-05 Jy
! Component: 150  -  total flux cleaned = 3.69371e-05 Jy
! Component: 200  -  total flux cleaned = 3.73928e-05 Jy
! Total flux subtracted in 200 components = 3.73928e-05 Jy
! Clean residual min=-0.001847 max=0.002047 Jy/beam
! Clean residual mean=-0.000006 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.0622675 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.0622675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068554Jy  sigma=1.318638
! Fit after  self-cal, rms=0.068554Jy  sigma=1.318631
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.501 mas, bmaj=8.149 mas, bpa=0.9152 degrees
! Estimated noise=0.37069 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.501 x 8.149 at 0.9152 degrees (North through East)
! Clean map  min=-0.001962  max=0.056555 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.911 mas, bmaj=6.712 mas, bpa=2.451 degrees
! Estimated noise=0.55094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0434591 Jy
! Component: 100  -  total flux cleaned = 0.0541363 Jy
! Component: 150  -  total flux cleaned = 0.058215 Jy
! Component: 200  -  total flux cleaned = 0.0602819 Jy
! Total flux subtracted in 200 components = 0.0602819 Jy
! Clean residual min=-0.003296 max=0.003145 Jy/beam
! Clean residual mean=0.000001 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.0602819 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0602819 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.501 mas, bmaj=8.149 mas, bpa=0.9152 degrees
! Estimated noise=0.37069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159245 Jy
! Component: 100  -  total flux cleaned = 0.00166445 Jy
! Component: 150  -  total flux cleaned = 0.00166504 Jy
! Component: 200  -  total flux cleaned = 0.00163582 Jy
! Total flux subtracted in 200 components = 0.00163582 Jy
! Clean residual min=-0.002123 max=0.001980 Jy/beam
! Clean residual mean=-0.000003 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.0619178 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.0619178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.368 mas, bmaj=15.99 mas, bpa=2.961 degrees
! Estimated noise=0.472718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439906 Jy
! Component: 100  -  total flux cleaned = 0.000513158 Jy
! Component: 150  -  total flux cleaned = 0.000551314 Jy
! Component: 200  -  total flux cleaned = 0.000582103 Jy
! Total flux subtracted in 200 components = 0.000582103 Jy
! Clean residual min=-0.001884 max=0.002120 Jy/beam
! Clean residual mean=-0.000006 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.0624999 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.31586e-06 Jy
! Component: 100  -  total flux cleaned = -1.63469e-06 Jy
! Component: 150  -  total flux cleaned = -1.42748e-06 Jy
! Component: 200  -  total flux cleaned = -9.25779e-07 Jy
! Total flux subtracted in 200 components = -9.25779e-07 Jy
! Clean residual min=-0.001865 max=0.002095 Jy/beam
! Clean residual mean=-0.000006 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.0624989 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.0624989 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.501 mas, bmaj=8.149 mas, bpa=0.9152 degrees
! Estimated noise=0.37069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000218898 Jy
! Component: 100  -  total flux cleaned = -0.000269413 Jy
! Component: 150  -  total flux cleaned = -0.000307827 Jy
! Component: 200  -  total flux cleaned = -0.000355354 Jy
! Total flux subtracted in 200 components = -0.000355354 Jy
! Clean residual min=-0.002020 max=0.001891 Jy/beam
! Clean residual mean=-0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0621436 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.0621436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068559Jy  sigma=1.318705
! Fit after  self-cal, rms=0.068558Jy  sigma=1.318683
wmodel /J1015-1952_S_map.mod
! wmodel: Unable to open new model file: /J1015-1952_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1015-1952_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.501 x 8.149 at 0.9152 degrees (North through East)
! Clean map  min=-0.0019506  max=0.056403 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1015-1952_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0564029 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000473667 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.51938 2.51938 5.03875 10.0775 20.155 40.31 80.62
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.056 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  119.077 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1015-1952_S_dfm.log closed on Thu May 19 23:15:43 2016