! Started logfile: /scr/pima/bg219i_uvs/J1008-0933_X_uvs.log on Wed Apr  6 23:40:26 2016
obs /scr/pima/bg219i_uvs/J1008-0933_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1008-0933_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.861905 visibilities/baseline/integration-bin.
! Found source: J1008-0933
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19548 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1008-0933_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.009349Jy  sigma=23.202177
! Fit after  self-cal, rms=0.931735Jy  sigma=21.366393
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6909 mas, bmaj=1.699 mas, bpa=-2.865 degrees
! Estimated noise=0.503542 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0559466 Jy
! Component: 100  -  total flux cleaned = 0.069345 Jy
! Total flux subtracted in 100 components = 0.069345 Jy
! Clean residual min=-0.007031 max=0.018791 Jy/beam
! Clean residual mean=0.000020 rms=0.002151 Jy/beam
! Combined flux in latest and established models = 0.069345 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.069345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.085342Jy  sigma=1.848196
! Fit after  self-cal, rms=0.083080Jy  sigma=1.802489
! Inverting map 
! Added new window around map position (-0.6, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185577 Jy
! Component: 100  -  total flux cleaned = 0.0292397 Jy
! Total flux subtracted in 100 components = 0.0292397 Jy
! Clean residual min=-0.005633 max=0.010754 Jy/beam
! Clean residual mean=0.000013 rms=0.001625 Jy/beam
! Combined flux in latest and established models = 0.0985847 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.0985847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077386Jy  sigma=1.641566
! Fit after  self-cal, rms=0.075213Jy  sigma=1.599099
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127837 Jy
! Component: 100  -  total flux cleaned = 0.0212337 Jy
! Total flux subtracted in 100 components = 0.0212337 Jy
! Clean residual min=-0.004744 max=0.006858 Jy/beam
! Clean residual mean=0.000009 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.119818 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 36 components and 0.119818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.071619Jy  sigma=1.497583
! Fit after  self-cal, rms=0.070967Jy  sigma=1.486784
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8398 mas, bmaj=1.974 mas, bpa=-2.011 degrees
! Estimated noise=0.308024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135964 Jy
! Component: 100  -  total flux cleaned = 0.0212487 Jy
! Component: 150  -  total flux cleaned = 0.0261493 Jy
! Component: 200  -  total flux cleaned = 0.0297634 Jy
! Total flux subtracted in 200 components = 0.0297634 Jy
! Clean residual min=-0.003815 max=0.004978 Jy/beam
! Clean residual mean=-0.000000 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.149582 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 54 components and 0.149582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068495Jy  sigma=1.411871
! Fit after  self-cal, rms=0.067912Jy  sigma=1.400778
! Inverting map 
! Added new window around map position (0.6, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00680034 Jy
! Component: 100  -  total flux cleaned = 0.0109641 Jy
! Component: 150  -  total flux cleaned = 0.0138783 Jy
! Component: 200  -  total flux cleaned = 0.0160899 Jy
! Total flux subtracted in 200 components = 0.0160899 Jy
! Clean residual min=-0.002760 max=0.002896 Jy/beam
! Clean residual mean=-0.000003 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.165672 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 81 components and 0.165672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067244Jy  sigma=1.378933
! Fit after  self-cal, rms=0.067072Jy  sigma=1.374962
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8398 x 1.974 at -2.011 degrees (North through East)
! Clean map  min=-0.0024572  max=0.072046 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.04     KP        0.97     
!   LA        0.93     MK        0.99     NL        1.06     OV        0.96     
!   PT        1.09     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.96     KP        0.95     
!   LA        0.97     MK        1.02     NL        1.04     OV        0.95     
!   PT        1.16     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.96     KP        0.98     
!   LA        1.00     MK        1.03     NL        1.03     OV        0.90     
!   PT        1.12     SC        1.09     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.09     NL        1.01     OV        0.96     
!   PT        1.11     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.94     KP        0.96     
!   LA        0.94     MK        1.02     NL        1.00     OV        0.95     
!   PT        1.14     SC        0.95     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067072Jy  sigma=1.374962
! Fit after  self-cal, rms=0.068404Jy  sigma=1.369986
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8445 mas, bmaj=1.985 mas, bpa=-1.826 degrees
! Estimated noise=0.30591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198221 Jy
! Component: 100  -  total flux cleaned = 0.00274704 Jy
! Component: 150  -  total flux cleaned = 0.0032055 Jy
! Component: 200  -  total flux cleaned = 0.00350427 Jy
! Total flux subtracted in 200 components = 0.00350427 Jy
! Clean residual min=-0.002070 max=0.002451 Jy/beam
! Clean residual mean=-0.000000 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.169176 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.169176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068286Jy  sigma=1.366182
! Fit after  self-cal, rms=0.068337Jy  sigma=1.365656
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068337Jy  sigma=1.365656
! Fit after  self-cal, rms=0.068966Jy  sigma=1.363117
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8442 mas, bmaj=1.989 mas, bpa=-2.069 degrees
! Estimated noise=0.30642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123157 Jy
! Component: 100  -  total flux cleaned = 0.00165439 Jy
! Component: 150  -  total flux cleaned = 0.00181263 Jy
! Component: 200  -  total flux cleaned = 0.00192042 Jy
! Total flux subtracted in 200 components = 0.00192042 Jy
! Clean residual min=-0.001854 max=0.002182 Jy/beam
! Clean residual mean=0.000000 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.171096 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 106 components and 0.171096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068918Jy  sigma=1.361567
! Fit after  self-cal, rms=0.068936Jy  sigma=1.361379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27.4, -29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186603 Jy
! Component: 100  -  total flux cleaned = 0.00242822 Jy
! Component: 150  -  total flux cleaned = 0.00263938 Jy
! Component: 200  -  total flux cleaned = 0.0027802 Jy
! Total flux subtracted in 200 components = 0.0027802 Jy
! Clean residual min=-0.001792 max=0.002108 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.173877 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 124 components and 0.173877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068862Jy  sigma=1.359308
! Fit after  self-cal, rms=0.068853Jy  sigma=1.359103
! Inverting map 
! Added new window around map position (-20, 39.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143765 Jy
! Component: 100  -  total flux cleaned = 0.00157962 Jy
! Component: 150  -  total flux cleaned = 0.00150114 Jy
! Component: 200  -  total flux cleaned = 0.00135963 Jy
! Total flux subtracted in 200 components = 0.00135963 Jy
! Clean residual min=-0.001731 max=0.001864 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.175236 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 139 components and 0.175236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068782Jy  sigma=1.357394
! Fit after  self-cal, rms=0.068780Jy  sigma=1.357264
! Inverting map 
! Added new window around map position (8.2, 17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143629 Jy
! Component: 100  -  total flux cleaned = 0.00152674 Jy
! Component: 150  -  total flux cleaned = 0.00160404 Jy
! Component: 200  -  total flux cleaned = 0.00170646 Jy
! Total flux subtracted in 200 components = 0.00170646 Jy
! Clean residual min=-0.001607 max=0.001568 Jy/beam
! Clean residual mean=-0.000000 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.176943 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.176943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068715Jy  sigma=1.355871
! Fit after  self-cal, rms=0.068716Jy  sigma=1.355776
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068716Jy  sigma=1.355776
! Fit after  self-cal, rms=0.069208Jy  sigma=1.354632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8423 mas, bmaj=1.986 mas, bpa=-2.178 degrees
! Estimated noise=0.306251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279589 Jy
! Component: 100  -  total flux cleaned = 0.000341363 Jy
! Component: 150  -  total flux cleaned = 0.000371071 Jy
! Component: 200  -  total flux cleaned = 0.000398706 Jy
! Total flux subtracted in 200 components = 0.000398706 Jy
! Clean residual min=-0.001559 max=0.001609 Jy/beam
! Clean residual mean=-0.000000 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.177341 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 169 components and 0.177341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069183Jy  sigma=1.354026
! Fit after  self-cal, rms=0.069199Jy  sigma=1.353937
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39.8, -43).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128532 Jy
! Component: 100  -  total flux cleaned = 0.00150339 Jy
! Component: 150  -  total flux cleaned = 0.00161104 Jy
! Component: 200  -  total flux cleaned = 0.00168627 Jy
! Total flux subtracted in 200 components = 0.00168627 Jy
! Clean residual min=-0.001510 max=0.001497 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.179028 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 188 components and 0.179028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069160Jy  sigma=1.353089
! Fit after  self-cal, rms=0.069162Jy  sigma=1.353013
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069162Jy  sigma=1.353013
! Fit after  self-cal, rms=0.069160Jy  sigma=1.352818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.06 mas, bmaj=3.724 mas, bpa=1.526 degrees
! Estimated noise=0.409389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754165 Jy
! Component: 100  -  total flux cleaned = 0.00107486 Jy
! Component: 150  -  total flux cleaned = 0.00125534 Jy
! Component: 200  -  total flux cleaned = 0.00141021 Jy
! Total flux subtracted in 200 components = 0.00141021 Jy
! Clean residual min=-0.001639 max=0.001582 Jy/beam
! Clean residual mean=-0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.180438 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 209 components and 0.180438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069151Jy  sigma=1.352655
! Fit after  self-cal, rms=0.069149Jy  sigma=1.352597
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167871 Jy
! Component: 100  -  total flux cleaned = 0.000272158 Jy
! Component: 150  -  total flux cleaned = 0.000318915 Jy
! Component: 200  -  total flux cleaned = 0.000333615 Jy
! Total flux subtracted in 200 components = 0.000333615 Jy
! Clean residual min=-0.001595 max=0.001595 Jy/beam
! Clean residual mean=-0.000002 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.180771 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 219 components and 0.180771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069146Jy  sigma=1.352564
! Fit after  self-cal, rms=0.069141Jy  sigma=1.352542
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8413 mas, bmaj=1.983 mas, bpa=-2.175 degrees
! Estimated noise=0.305868 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8413 x 1.983 at -2.175 degrees (North through East)
! Clean map  min=-0.0013601  max=0.072131 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6945 mas, bmaj=1.705 mas, bpa=-3.114 degrees
! Estimated noise=0.499152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0585762 Jy
! Component: 100  -  total flux cleaned = 0.0849869 Jy
! Component: 150  -  total flux cleaned = 0.102183 Jy
! Component: 200  -  total flux cleaned = 0.115065 Jy
! Total flux subtracted in 200 components = 0.115065 Jy
! Clean residual min=-0.005077 max=0.008168 Jy/beam
! Clean residual mean=0.000013 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.115065 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.115065 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8413 mas, bmaj=1.983 mas, bpa=-2.175 degrees
! Estimated noise=0.305868 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149771 Jy
! Component: 100  -  total flux cleaned = 0.0246866 Jy
! Component: 150  -  total flux cleaned = 0.0317992 Jy
! Component: 200  -  total flux cleaned = 0.0372976 Jy
! Total flux subtracted in 200 components = 0.0372976 Jy
! Clean residual min=-0.003024 max=0.003759 Jy/beam
! Clean residual mean=0.000004 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.152362 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 85 components and 0.152362 Jy
! Inverting map 
! Added new window around map position (-26.4, -11.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452378 Jy
! Component: 100  -  total flux cleaned = 0.00827171 Jy
! Component: 150  -  total flux cleaned = 0.0114423 Jy
! Component: 200  -  total flux cleaned = 0.0141377 Jy
! Total flux subtracted in 200 components = 0.0141377 Jy
! Clean residual min=-0.002217 max=0.002148 Jy/beam
! Clean residual mean=0.000002 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.1665 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 118 components and 0.1665 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.06 mas, bmaj=3.724 mas, bpa=1.526 degrees
! Estimated noise=0.409389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035448 Jy
! Component: 100  -  total flux cleaned = 0.00592288 Jy
! Component: 150  -  total flux cleaned = 0.00782743 Jy
! Component: 200  -  total flux cleaned = 0.00938457 Jy
! Total flux subtracted in 200 components = 0.00938457 Jy
! Clean residual min=-0.001917 max=0.001665 Jy/beam
! Clean residual mean=0.000002 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.175884 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000998812 Jy
! Component: 100  -  total flux cleaned = 0.00186529 Jy
! Component: 150  -  total flux cleaned = 0.00254827 Jy
! Component: 200  -  total flux cleaned = 0.00301482 Jy
! Total flux subtracted in 200 components = 0.00301482 Jy
! Clean residual min=-0.001765 max=0.001601 Jy/beam
! Clean residual mean=0.000001 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.178899 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 193 components and 0.178899 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8413 mas, bmaj=1.983 mas, bpa=-2.175 degrees
! Estimated noise=0.305868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000571191 Jy
! Component: 100  -  total flux cleaned = 0.000619143 Jy
! Component: 150  -  total flux cleaned = 0.000746998 Jy
! Component: 200  -  total flux cleaned = 0.000943463 Jy
! Total flux subtracted in 200 components = 0.000943463 Jy
! Clean residual min=-0.001565 max=0.001537 Jy/beam
! Clean residual mean=0.000001 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.179843 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 220 components and 0.179843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069199Jy  sigma=1.353927
! Fit after  self-cal, rms=0.069183Jy  sigma=1.353463
wmodel /scr/pima/bg219i_uvs/J1008-0933_X_map.mod
! Writing 220 model components to file: /scr/pima/bg219i_uvs/J1008-0933_X_map.mod
wobs /scr/pima/bg219i_uvs/J1008-0933_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1008-0933_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1008-0933_X_map.win
! wwins: Wrote 9 windows to /scr/pima/bg219i_uvs/J1008-0933_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000511563 Jy
! Component: 100  -  total flux cleaned = -0.000903652 Jy
! Component: 150  -  total flux cleaned = -0.00117575 Jy
! Component: 200  -  total flux cleaned = -0.00143607 Jy
! Component: 250  -  total flux cleaned = -0.00164005 Jy
! Component: 300  -  total flux cleaned = -0.00163937 Jy
! Component: 350  -  total flux cleaned = -0.00161779 Jy
! Component: 400  -  total flux cleaned = -0.00159722 Jy
! Component: 450  -  total flux cleaned = -0.00161728 Jy
! Component: 500  -  total flux cleaned = -0.00153755 Jy
! Component: 550  -  total flux cleaned = -0.00149894 Jy
! Component: 600  -  total flux cleaned = -0.001518 Jy
! Component: 650  -  total flux cleaned = -0.00148043 Jy
! Component: 700  -  total flux cleaned = -0.00144308 Jy
! Component: 750  -  total flux cleaned = -0.00140678 Jy
! Component: 800  -  total flux cleaned = -0.00137092 Jy
! Component: 850  -  total flux cleaned = -0.00130033 Jy
! Component: 900  -  total flux cleaned = -0.00123064 Jy
! Component: 950  -  total flux cleaned = -0.00121322 Jy
! Component: 1000  -  total flux cleaned = -0.00106047 Jy
! Component: 1050  -  total flux cleaned = -0.00102722 Jy
! Component: 1100  -  total flux cleaned = -0.000994073 Jy
! Component: 1150  -  total flux cleaned = -0.000830994 Jy
! Component: 1200  -  total flux cleaned = -0.000814694 Jy
! Component: 1250  -  total flux cleaned = -0.000750725 Jy
! Component: 1300  -  total flux cleaned = -0.000655929 Jy
! Component: 1350  -  total flux cleaned = -0.000562512 Jy
! Component: 1400  -  total flux cleaned = -0.000485576 Jy
! Component: 1450  -  total flux cleaned = -0.000485663 Jy
! Component: 1500  -  total flux cleaned = -0.000380175 Jy
! Component: 1550  -  total flux cleaned = -0.000395351 Jy
! Component: 1600  -  total flux cleaned = -0.000276912 Jy
! Component: 1650  -  total flux cleaned = -0.000189391 Jy
! Component: 1700  -  total flux cleaned = -0.000102918 Jy
! Component: 1750  -  total flux cleaned = -0.000102933 Jy
! Component: 1800  -  total flux cleaned = -4.6115e-05 Jy
! Component: 1850  -  total flux cleaned = 5.20461e-05 Jy
! Component: 1900  -  total flux cleaned = 6.57963e-05 Jy
! Component: 1950  -  total flux cleaned = 0.00012094 Jy
! Component: 2000  -  total flux cleaned = 0.000175458 Jy
! Component: 2050  -  total flux cleaned = 0.000188963 Jy
! Component: 2100  -  total flux cleaned = 0.000215849 Jy
! Component: 2150  -  total flux cleaned = 0.000295485 Jy
! Component: 2200  -  total flux cleaned = 0.000308572 Jy
! Component: 2250  -  total flux cleaned = 0.000347656 Jy
! Component: 2300  -  total flux cleaned = 0.000360532 Jy
! Component: 2350  -  total flux cleaned = 0.000424522 Jy
! Component: 2400  -  total flux cleaned = 0.000462833 Jy
! Component: 2450  -  total flux cleaned = 0.000563448 Jy
! Component: 2500  -  total flux cleaned = 0.000575885 Jy
! Component: 2550  -  total flux cleaned = 0.000637729 Jy
! Component: 2600  -  total flux cleaned = 0.000723601 Jy
! Component: 2650  -  total flux cleaned = 0.000735621 Jy
! Component: 2700  -  total flux cleaned = 0.000796144 Jy
! Component: 2750  -  total flux cleaned = 0.000856263 Jy
! Component: 2800  -  total flux cleaned = 0.00092769 Jy
! Component: 2850  -  total flux cleaned = 0.000939614 Jy
! Component: 2900  -  total flux cleaned = 0.000998199 Jy
! Component: 2950  -  total flux cleaned = 0.00105645 Jy
! Component: 3000  -  total flux cleaned = 0.00109099 Jy
! Component: 3050  -  total flux cleaned = 0.0011483 Jy
! Component: 3100  -  total flux cleaned = 0.00115986 Jy
! Component: 3150  -  total flux cleaned = 0.00120511 Jy
! Component: 3200  -  total flux cleaned = 0.00126138 Jy
! Component: 3250  -  total flux cleaned = 0.00130619 Jy
! Component: 3300  -  total flux cleaned = 0.00137265 Jy
! Component: 3350  -  total flux cleaned = 0.00133954 Jy
! Component: 3400  -  total flux cleaned = 0.00138328 Jy
! Component: 3450  -  total flux cleaned = 0.001405 Jy
! Component: 3500  -  total flux cleaned = 0.00141584 Jy
! Component: 3550  -  total flux cleaned = 0.00146944 Jy
! Component: 3600  -  total flux cleaned = 0.00145877 Jy
! Component: 3650  -  total flux cleaned = 0.00145887 Jy
! Component: 3700  -  total flux cleaned = 0.00146954 Jy
! Component: 3750  -  total flux cleaned = 0.0015113 Jy
! Component: 3800  -  total flux cleaned = 0.0015217 Jy
! Component: 3850  -  total flux cleaned = 0.00155265 Jy
! Component: 3900  -  total flux cleaned = 0.0015425 Jy
! Component: 3950  -  total flux cleaned = 0.00158334 Jy
! Component: 4000  -  total flux cleaned = 0.00156293 Jy
! Component: 4050  -  total flux cleaned = 0.00157303 Jy
! Total flux subtracted in 4096 components = 0.00158304 Jy
! Clean residual min=-0.000634 max=0.000659 Jy/beam
! Clean residual mean=0.000000 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.181426 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 527 components and 0.181425 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1008-0933_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8413 x 1.983 at -2.175 degrees (North through East)
! Clean map  min=-0.0010228  max=0.071141 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1008-0933_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0711413 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000171334 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.722509 0.722509 1.44502 2.89003 5.78007 11.5601 23.1203 46.2406 92.4811
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  415.219 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1008-0933_X_uvs.log closed on Wed Apr  6 23:40:32 2016