! Started logfile: /scr/pima/bg219i_uvs/J1001+1015_X_uvs.log on Wed Apr  6 23:40:03 2016
obs /scr/pima/bg219i_uvs/J1001+1015_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1001+1015_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798291 visibilities/baseline/integration-bin.
! Found source: J1001+1015
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22416 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J1001+1015_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.009789Jy  sigma=24.995570
! Fit after  self-cal, rms=0.891134Jy  sigma=21.966889
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6929 mas, bmaj=1.752 mas, bpa=-4.709 degrees
! Estimated noise=0.435326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0824658 Jy
! Component: 100  -  total flux cleaned = 0.106221 Jy
! Total flux subtracted in 100 components = 0.106221 Jy
! Clean residual min=-0.008596 max=0.019537 Jy/beam
! Clean residual mean=0.000002 rms=0.002307 Jy/beam
! Combined flux in latest and established models = 0.106221 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.106221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074441Jy  sigma=1.727551
! Fit after  self-cal, rms=0.074223Jy  sigma=1.723271
! Inverting map 
! Added new window around map position (-3.2, -13).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185031 Jy
! Component: 100  -  total flux cleaned = 0.0300493 Jy
! Total flux subtracted in 100 components = 0.0300493 Jy
! Clean residual min=-0.005930 max=0.007251 Jy/beam
! Clean residual mean=0.000003 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.13627 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.13627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068367Jy  sigma=1.549468
! Fit after  self-cal, rms=0.067973Jy  sigma=1.540409
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.902 mas, bmaj=2.082 mas, bpa=-5.341 degrees
! Estimated noise=0.271257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133725 Jy
! Component: 100  -  total flux cleaned = 0.0223617 Jy
! Component: 150  -  total flux cleaned = 0.0290344 Jy
! Component: 200  -  total flux cleaned = 0.034164 Jy
! Total flux subtracted in 200 components = 0.034164 Jy
! Clean residual min=-0.004370 max=0.008783 Jy/beam
! Clean residual mean=0.000008 rms=0.001265 Jy/beam
! Combined flux in latest and established models = 0.170434 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 54 components and 0.170434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065071Jy  sigma=1.442082
! Fit after  self-cal, rms=0.064955Jy  sigma=1.439037
! Inverting map 
! Added new window around map position (-0.2, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768192 Jy
! Component: 100  -  total flux cleaned = 0.0121372 Jy
! Component: 150  -  total flux cleaned = 0.0156152 Jy
! Component: 200  -  total flux cleaned = 0.0184473 Jy
! Total flux subtracted in 200 components = 0.0184473 Jy
! Clean residual min=-0.003178 max=0.004832 Jy/beam
! Clean residual mean=0.000003 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.188881 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 78 components and 0.188881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063919Jy  sigma=1.408909
! Fit after  self-cal, rms=0.063871Jy  sigma=1.407447
! Inverting map 
! Added new window around map position (-1.8, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00446617 Jy
! Component: 100  -  total flux cleaned = 0.0069951 Jy
! Component: 150  -  total flux cleaned = 0.00834035 Jy
! Component: 200  -  total flux cleaned = 0.00951649 Jy
! Total flux subtracted in 200 components = 0.00951649 Jy
! Clean residual min=-0.002435 max=0.003567 Jy/beam
! Clean residual mean=0.000001 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.198398 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 105 components and 0.198398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063509Jy  sigma=1.396667
! Fit after  self-cal, rms=0.063493Jy  sigma=1.395976
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.902 x 2.082 at -5.341 degrees (North through East)
! Clean map  min=-0.0023354  max=0.11126 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        0.98     KP        0.99     
!   LA        0.95     MK        1.06     NL        1.01     OV        0.98     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.01     KP        1.00     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.03     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.00     NL        0.97     OV        0.98     
!   PT        1.04     SC        1.00     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.00     NL        0.97     OV        0.97     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.96     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.92     
!   PT        1.08     SC        1.08     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063493Jy  sigma=1.395976
! Fit after  self-cal, rms=0.063552Jy  sigma=1.388298
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9121 mas, bmaj=2.095 mas, bpa=-5.647 degrees
! Estimated noise=0.266817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000758775 Jy
! Component: 100  -  total flux cleaned = 0.00114279 Jy
! Component: 150  -  total flux cleaned = 0.00149355 Jy
! Component: 200  -  total flux cleaned = 0.00175864 Jy
! Total flux subtracted in 200 components = 0.00175864 Jy
! Clean residual min=-0.002175 max=0.002505 Jy/beam
! Clean residual mean=0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.200157 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 127 components and 0.200157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063454Jy  sigma=1.386422
! Fit after  self-cal, rms=0.063496Jy  sigma=1.386273
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063496Jy  sigma=1.386273
! Fit after  self-cal, rms=0.065790Jy  sigma=1.379321
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.912 mas, bmaj=2.091 mas, bpa=-5.556 degrees
! Estimated noise=0.266968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224379 Jy
! Component: 100  -  total flux cleaned = 0.000282666 Jy
! Component: 150  -  total flux cleaned = 0.000306431 Jy
! Component: 200  -  total flux cleaned = 0.000281812 Jy
! Total flux subtracted in 200 components = 0.000281812 Jy
! Clean residual min=-0.001411 max=0.001560 Jy/beam
! Clean residual mean=-0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.200438 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.200438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065769Jy  sigma=1.378596
! Fit after  self-cal, rms=0.065813Jy  sigma=1.378490
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000805181 Jy
! Component: 100  -  total flux cleaned = 0.000671656 Jy
! Component: 150  -  total flux cleaned = 0.000613905 Jy
! Component: 200  -  total flux cleaned = 0.000712664 Jy
! Total flux subtracted in 200 components = 0.000712664 Jy
! Clean residual min=-0.001403 max=0.001366 Jy/beam
! Clean residual mean=-0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.201151 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 159 components and 0.201151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065768Jy  sigma=1.377587
! Fit after  self-cal, rms=0.065770Jy  sigma=1.377540
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065770Jy  sigma=1.377540
! Fit after  self-cal, rms=0.065703Jy  sigma=1.377503
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9122 mas, bmaj=2.091 mas, bpa=-5.582 degrees
! Estimated noise=0.266588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.1313e-05 Jy
! Component: 100  -  total flux cleaned = -4.12541e-05 Jy
! Component: 150  -  total flux cleaned = -0.000147573 Jy
! Component: 200  -  total flux cleaned = -0.000266418 Jy
! Total flux subtracted in 200 components = -0.000266418 Jy
! Clean residual min=-0.001364 max=0.001331 Jy/beam
! Clean residual mean=-0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.200885 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 170 components and 0.200885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065688Jy  sigma=1.377185
! Fit after  self-cal, rms=0.065689Jy  sigma=1.377176
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.91029e-05 Jy
! Component: 100  -  total flux cleaned = -0.000168726 Jy
! Component: 150  -  total flux cleaned = -0.000237638 Jy
! Component: 200  -  total flux cleaned = -0.000286931 Jy
! Total flux subtracted in 200 components = -0.000286931 Jy
! Clean residual min=-0.001341 max=0.001333 Jy/beam
! Clean residual mean=-0.000002 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.200598 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 177 components and 0.200598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065679Jy  sigma=1.376962
! Fit after  self-cal, rms=0.065680Jy  sigma=1.376959
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065680Jy  sigma=1.376959
! Fit after  self-cal, rms=0.065612Jy  sigma=1.376945
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=3.244 mas, bpa=9.989 degrees
! Estimated noise=0.329715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000242834 Jy
! Component: 100  -  total flux cleaned = -0.000489958 Jy
! Component: 150  -  total flux cleaned = -0.000581118 Jy
! Component: 200  -  total flux cleaned = -0.000663955 Jy
! Total flux subtracted in 200 components = -0.000663955 Jy
! Clean residual min=-0.001553 max=0.001570 Jy/beam
! Clean residual mean=-0.000002 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.199934 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 193 components and 0.199934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065607Jy  sigma=1.376854
! Fit after  self-cal, rms=0.065607Jy  sigma=1.376835
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113294 Jy
! Component: 100  -  total flux cleaned = -0.000202373 Jy
! Component: 150  -  total flux cleaned = -0.000272824 Jy
! Component: 200  -  total flux cleaned = -0.000359674 Jy
! Total flux subtracted in 200 components = -0.000359674 Jy
! Clean residual min=-0.001540 max=0.001557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.199574 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 200 components and 0.199574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065606Jy  sigma=1.376803
! Fit after  self-cal, rms=0.065606Jy  sigma=1.376794
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.092 mas, bpa=-5.582 degrees
! Estimated noise=0.266414 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9129 x 2.092 at -5.582 degrees (North through East)
! Clean map  min=-0.0014134  max=0.10955 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6983 mas, bmaj=1.753 mas, bpa=-4.908 degrees
! Estimated noise=0.431502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0809979 Jy
! Component: 100  -  total flux cleaned = 0.108631 Jy
! Component: 150  -  total flux cleaned = 0.126327 Jy
! Component: 200  -  total flux cleaned = 0.138595 Jy
! Total flux subtracted in 200 components = 0.138595 Jy
! Clean residual min=-0.004954 max=0.006974 Jy/beam
! Clean residual mean=0.000004 rms=0.001422 Jy/beam
! Combined flux in latest and established models = 0.138595 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.138595 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.092 mas, bpa=-5.582 degrees
! Estimated noise=0.266414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127097 Jy
! Component: 100  -  total flux cleaned = 0.0220329 Jy
! Component: 150  -  total flux cleaned = 0.0293018 Jy
! Component: 200  -  total flux cleaned = 0.0350102 Jy
! Total flux subtracted in 200 components = 0.0350102 Jy
! Clean residual min=-0.002781 max=0.003472 Jy/beam
! Clean residual mean=0.000004 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.173605 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 38 components and 0.173605 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=3.244 mas, bpa=9.989 degrees
! Estimated noise=0.329715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00694166 Jy
! Component: 100  -  total flux cleaned = 0.0117689 Jy
! Component: 150  -  total flux cleaned = 0.0152441 Jy
! Component: 200  -  total flux cleaned = 0.0178116 Jy
! Total flux subtracted in 200 components = 0.0178116 Jy
! Clean residual min=-0.002243 max=0.002457 Jy/beam
! Clean residual mean=0.000002 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.191416 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193566 Jy
! Component: 100  -  total flux cleaned = 0.00313872 Jy
! Component: 150  -  total flux cleaned = 0.00395032 Jy
! Component: 200  -  total flux cleaned = 0.00460324 Jy
! Total flux subtracted in 200 components = 0.00460324 Jy
! Clean residual min=-0.001933 max=0.001968 Jy/beam
! Clean residual mean=-0.000000 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.19602 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 111 components and 0.19602 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9129 mas, bmaj=2.092 mas, bpa=-5.582 degrees
! Estimated noise=0.266414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152695 Jy
! Component: 100  -  total flux cleaned = 0.000260544 Jy
! Component: 150  -  total flux cleaned = 0.000262532 Jy
! Component: 200  -  total flux cleaned = 0.000439521 Jy
! Total flux subtracted in 200 components = 0.000439521 Jy
! Clean residual min=-0.001646 max=0.001658 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.196459 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 132 components and 0.196459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065729Jy  sigma=1.379611
! Fit after  self-cal, rms=0.065697Jy  sigma=1.379236
wmodel /scr/pima/bg219i_uvs/J1001+1015_X_map.mod
! Writing 132 model components to file: /scr/pima/bg219i_uvs/J1001+1015_X_map.mod
wobs /scr/pima/bg219i_uvs/J1001+1015_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J1001+1015_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J1001+1015_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219i_uvs/J1001+1015_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178486 Jy
! Component: 100  -  total flux cleaned = 0.000206605 Jy
! Component: 150  -  total flux cleaned = 0.000232745 Jy
! Component: 200  -  total flux cleaned = 0.000209451 Jy
! Component: 250  -  total flux cleaned = 0.000232505 Jy
! Component: 300  -  total flux cleaned = 0.000188199 Jy
! Component: 350  -  total flux cleaned = 0.000166716 Jy
! Component: 400  -  total flux cleaned = 0.000166878 Jy
! Component: 450  -  total flux cleaned = 0.000207207 Jy
! Component: 500  -  total flux cleaned = 0.000246505 Jy
! Component: 550  -  total flux cleaned = 0.000227171 Jy
! Component: 600  -  total flux cleaned = 0.000245705 Jy
! Component: 650  -  total flux cleaned = 0.000263734 Jy
! Component: 700  -  total flux cleaned = 0.000227 Jy
! Component: 750  -  total flux cleaned = 0.000227134 Jy
! Component: 800  -  total flux cleaned = 0.000262202 Jy
! Component: 850  -  total flux cleaned = 0.00021017 Jy
! Component: 900  -  total flux cleaned = 0.000261367 Jy
! Component: 950  -  total flux cleaned = 0.000244223 Jy
! Component: 1000  -  total flux cleaned = 0.00026064 Jy
! Component: 1050  -  total flux cleaned = 0.000276603 Jy
! Component: 1100  -  total flux cleaned = 0.000260271 Jy
! Component: 1150  -  total flux cleaned = 0.000244285 Jy
! Component: 1200  -  total flux cleaned = 0.000212965 Jy
! Component: 1250  -  total flux cleaned = 0.000166788 Jy
! Component: 1300  -  total flux cleaned = 0.00012102 Jy
! Component: 1350  -  total flux cleaned = 9.09867e-05 Jy
! Component: 1400  -  total flux cleaned = 4.61748e-05 Jy
! Component: 1450  -  total flux cleaned = -4.17886e-05 Jy
! Component: 1500  -  total flux cleaned = -7.07317e-05 Jy
! Component: 1550  -  total flux cleaned = -0.000113774 Jy
! Component: 1600  -  total flux cleaned = -0.000198672 Jy
! Component: 1650  -  total flux cleaned = -0.000184841 Jy
! Component: 1700  -  total flux cleaned = -0.000240618 Jy
! Component: 1750  -  total flux cleaned = -0.000323344 Jy
! Component: 1800  -  total flux cleaned = -0.000364183 Jy
! Component: 1850  -  total flux cleaned = -0.000444927 Jy
! Component: 1900  -  total flux cleaned = -0.000497936 Jy
! Component: 1950  -  total flux cleaned = -0.000510965 Jy
! Component: 2000  -  total flux cleaned = -0.000563088 Jy
! Component: 2050  -  total flux cleaned = -0.000537185 Jy
! Component: 2100  -  total flux cleaned = -0.000639503 Jy
! Component: 2150  -  total flux cleaned = -0.000626747 Jy
! Component: 2200  -  total flux cleaned = -0.000639329 Jy
! Component: 2250  -  total flux cleaned = -0.000639487 Jy
! Component: 2300  -  total flux cleaned = -0.000676403 Jy
! Component: 2350  -  total flux cleaned = -0.000664097 Jy
! Component: 2400  -  total flux cleaned = -0.000676329 Jy
! Component: 2450  -  total flux cleaned = -0.000688241 Jy
! Component: 2500  -  total flux cleaned = -0.000664524 Jy
! Component: 2550  -  total flux cleaned = -0.000711892 Jy
! Component: 2600  -  total flux cleaned = -0.000735254 Jy
! Component: 2650  -  total flux cleaned = -0.000700285 Jy
! Component: 2700  -  total flux cleaned = -0.000723383 Jy
! Component: 2750  -  total flux cleaned = -0.000723181 Jy
! Component: 2800  -  total flux cleaned = -0.000677679 Jy
! Component: 2850  -  total flux cleaned = -0.000734246 Jy
! Component: 2900  -  total flux cleaned = -0.000734118 Jy
! Component: 2950  -  total flux cleaned = -0.000756227 Jy
! Component: 3000  -  total flux cleaned = -0.000745202 Jy
! Component: 3050  -  total flux cleaned = -0.00081108 Jy
! Component: 3100  -  total flux cleaned = -0.000789384 Jy
! Component: 3150  -  total flux cleaned = -0.000800213 Jy
! Component: 3200  -  total flux cleaned = -0.000853946 Jy
! Component: 3250  -  total flux cleaned = -0.000853927 Jy
! Component: 3300  -  total flux cleaned = -0.000896325 Jy
! Component: 3350  -  total flux cleaned = -0.000896218 Jy
! Component: 3400  -  total flux cleaned = -0.000906715 Jy
! Component: 3450  -  total flux cleaned = -0.000958618 Jy
! Component: 3500  -  total flux cleaned = -0.000948208 Jy
! Component: 3550  -  total flux cleaned = -0.000968762 Jy
! Component: 3600  -  total flux cleaned = -0.000989145 Jy
! Component: 3650  -  total flux cleaned = -0.000968769 Jy
! Component: 3700  -  total flux cleaned = -0.000968701 Jy
! Component: 3750  -  total flux cleaned = -0.000978632 Jy
! Component: 3800  -  total flux cleaned = -0.000948744 Jy
! Component: 3850  -  total flux cleaned = -0.000958593 Jy
! Component: 3900  -  total flux cleaned = -0.000909378 Jy
! Component: 3950  -  total flux cleaned = -0.000919252 Jy
! Component: 4000  -  total flux cleaned = -0.000948545 Jy
! Component: 4050  -  total flux cleaned = -0.000929171 Jy
! Total flux subtracted in 4096 components = -0.000929204 Jy
! Clean residual min=-0.000615 max=0.000571 Jy/beam
! Clean residual mean=-0.000002 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.19553 Jy
keep
! Adding 259 model components to the UV plane model.
! The established model now contains 391 components and 0.19553 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J1001+1015_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9129 x 2.092 at -5.582 degrees (North through East)
! Clean map  min=-0.0010042  max=0.11019 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1001+1015_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.110191 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000163428 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.444941 0.444941 0.889883 1.77977 3.55953 7.11906 14.2381 28.4762 56.9525
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  674.246 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1001+1015_X_uvs.log closed on Wed Apr  6 23:40:08 2016