! Started logfile: /scr/pima/bg219i_uvs/J1001+1015_X_dfm.log on Thu May 19 23:14:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J1001+1015_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J1001+1015_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798291 visibilities/baseline/integration-bin.
! Found source: J1001+1015
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1001+1015_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010182Jy  sigma=24.004723
! Fit after  self-cal, rms=0.890412Jy  sigma=21.070870
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6649 mas, bmaj=1.722 mas, bpa=-5.553 degrees
! Estimated noise=0.394246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.082416 Jy
! Component: 100  -  total flux cleaned = 0.10579 Jy
! Total flux subtracted in 100 components = 0.10579 Jy
! Clean residual min=-0.008085 max=0.017164 Jy/beam
! Clean residual mean=0.000007 rms=0.001947 Jy/beam
! Combined flux in latest and established models = 0.10579 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.10579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077473Jy  sigma=1.714296
! Fit after  self-cal, rms=0.077256Jy  sigma=1.710341
! Inverting map 
! Added new window around map position (-3.2, -13.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170764 Jy
! Component: 100  -  total flux cleaned = 0.0282272 Jy
! Total flux subtracted in 100 components = 0.0282272 Jy
! Clean residual min=-0.006185 max=0.007430 Jy/beam
! Clean residual mean=0.000007 rms=0.001418 Jy/beam
! Combined flux in latest and established models = 0.134017 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.134017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071833Jy  sigma=1.553137
! Fit after  self-cal, rms=0.071515Jy  sigma=1.546489
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8967 mas, bmaj=2.067 mas, bpa=-5.301 degrees
! Estimated noise=0.216318 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142566 Jy
! Component: 100  -  total flux cleaned = 0.0237487 Jy
! Component: 150  -  total flux cleaned = 0.0307113 Jy
! Component: 200  -  total flux cleaned = 0.0359615 Jy
! Total flux subtracted in 200 components = 0.0359615 Jy
! Clean residual min=-0.004378 max=0.008836 Jy/beam
! Clean residual mean=0.000014 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.169979 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 41 components and 0.169979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068401Jy  sigma=1.445733
! Fit after  self-cal, rms=0.068200Jy  sigma=1.440933
! Inverting map 
! Added new window around map position (-0.2, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00795365 Jy
! Component: 100  -  total flux cleaned = 0.0126597 Jy
! Component: 150  -  total flux cleaned = 0.0162261 Jy
! Component: 200  -  total flux cleaned = 0.0191308 Jy
! Total flux subtracted in 200 components = 0.0191308 Jy
! Clean residual min=-0.003018 max=0.004738 Jy/beam
! Clean residual mean=0.000006 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.18911 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 75 components and 0.189109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067164Jy  sigma=1.410971
! Fit after  self-cal, rms=0.067102Jy  sigma=1.409442
! Inverting map 
! Added new window around map position (-1.8, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437343 Jy
! Component: 100  -  total flux cleaned = 0.00694772 Jy
! Component: 150  -  total flux cleaned = 0.00907154 Jy
! Component: 200  -  total flux cleaned = 0.0105303 Jy
! Total flux subtracted in 200 components = 0.0105303 Jy
! Clean residual min=-0.002314 max=0.003315 Jy/beam
! Clean residual mean=0.000004 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.19964 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 102 components and 0.19964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066770Jy  sigma=1.399618
! Fit after  self-cal, rms=0.066753Jy  sigma=1.398984
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8967 x 2.067 at -5.301 degrees (North through East)
! Clean map  min=-0.0020688  max=0.11198 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.99     KP        1.00     
!   LA        0.96     MK        1.07     NL        1.01     OV        0.98     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.97     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.00     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.04     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.01     KP        1.00     
!   LA        1.00     MK        1.00     NL        0.97     OV        0.99     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        0.98     
!   LA        0.98     MK        0.98     NL        0.97     OV        0.97     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.97     OV        0.97     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.97     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.02     OV        0.92     
!   PT        1.08     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.95     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.93     MK        0.99     NL        1.00     OV        0.96     
!   PT        1.02     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.94     MK        1.04     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.01     OV        0.94     
!   PT        1.00     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.066753Jy  sigma=1.398984
! Fit after  self-cal, rms=0.066660Jy  sigma=1.392094
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9065 mas, bmaj=2.079 mas, bpa=-5.565 degrees
! Estimated noise=0.212756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846553 Jy
! Component: 100  -  total flux cleaned = 0.00122132 Jy
! Component: 150  -  total flux cleaned = 0.00148885 Jy
! Component: 200  -  total flux cleaned = 0.00172333 Jy
! Total flux subtracted in 200 components = 0.00172333 Jy
! Clean residual min=-0.002179 max=0.002394 Jy/beam
! Clean residual mean=0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.201363 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 122 components and 0.201363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066567Jy  sigma=1.390344
! Fit after  self-cal, rms=0.066609Jy  sigma=1.390195
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066609Jy  sigma=1.390195
! Fit after  self-cal, rms=0.068743Jy  sigma=1.383466
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9065 mas, bmaj=2.074 mas, bpa=-5.485 degrees
! Estimated noise=0.212674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457825 Jy
! Component: 100  -  total flux cleaned = 0.000519994 Jy
! Component: 150  -  total flux cleaned = 0.000494818 Jy
! Component: 200  -  total flux cleaned = 0.0004247 Jy
! Total flux subtracted in 200 components = 0.0004247 Jy
! Clean residual min=-0.001302 max=0.001524 Jy/beam
! Clean residual mean=-0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.201788 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.201788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068721Jy  sigma=1.382829
! Fit after  self-cal, rms=0.068762Jy  sigma=1.382719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (26.6, -7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612615 Jy
! Component: 100  -  total flux cleaned = 0.000493323 Jy
! Component: 150  -  total flux cleaned = 0.0003384 Jy
! Component: 200  -  total flux cleaned = 0.000246375 Jy
! Total flux subtracted in 200 components = 0.000246375 Jy
! Clean residual min=-0.001354 max=0.001194 Jy/beam
! Clean residual mean=0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.202034 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 150 components and 0.202034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068723Jy  sigma=1.381957
! Fit after  self-cal, rms=0.068723Jy  sigma=1.381888
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068723Jy  sigma=1.381888
! Fit after  self-cal, rms=0.068982Jy  sigma=1.381000
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9055 mas, bmaj=2.073 mas, bpa=-5.553 degrees
! Estimated noise=0.212374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014221 Jy
! Component: 100  -  total flux cleaned = -0.000187884 Jy
! Component: 150  -  total flux cleaned = -0.000227854 Jy
! Component: 200  -  total flux cleaned = -0.000228041 Jy
! Total flux subtracted in 200 components = -0.000228041 Jy
! Clean residual min=-0.001196 max=0.001163 Jy/beam
! Clean residual mean=-0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.201806 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 160 components and 0.201806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068968Jy  sigma=1.380725
! Fit after  self-cal, rms=0.068973Jy  sigma=1.380704
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.41707e-05 Jy
! Component: 100  -  total flux cleaned = -3.09614e-07 Jy
! Component: 150  -  total flux cleaned = -1.63039e-05 Jy
! Component: 200  -  total flux cleaned = -3.13975e-05 Jy
! Total flux subtracted in 200 components = -3.13975e-05 Jy
! Clean residual min=-0.001169 max=0.001145 Jy/beam
! Clean residual mean=-0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.201775 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 168 components and 0.201775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068965Jy  sigma=1.380536
! Fit after  self-cal, rms=0.068965Jy  sigma=1.380535
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068965Jy  sigma=1.380535
! Fit after  self-cal, rms=0.068903Jy  sigma=1.380517
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.228 mas, bmaj=3.231 mas, bpa=9.977 degrees
! Estimated noise=0.262352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.207e-05 Jy
! Component: 100  -  total flux cleaned = -0.000128695 Jy
! Component: 150  -  total flux cleaned = -0.000180472 Jy
! Component: 200  -  total flux cleaned = -0.000238154 Jy
! Total flux subtracted in 200 components = -0.000238154 Jy
! Clean residual min=-0.001451 max=0.001183 Jy/beam
! Clean residual mean=0.000000 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.201537 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 179 components and 0.201537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068900Jy  sigma=1.380494
! Fit after  self-cal, rms=0.068900Jy  sigma=1.380479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.12432e-05 Jy
! Component: 100  -  total flux cleaned = 4.02997e-05 Jy
! Component: 150  -  total flux cleaned = 1.04176e-05 Jy
! Component: 200  -  total flux cleaned = -8.83312e-06 Jy
! Total flux subtracted in 200 components = -8.83312e-06 Jy
! Clean residual min=-0.001450 max=0.001176 Jy/beam
! Clean residual mean=0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.201528 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 193 components and 0.201528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068900Jy  sigma=1.380486
! Fit after  self-cal, rms=0.068900Jy  sigma=1.380486
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=2.073 mas, bpa=-5.59 degrees
! Estimated noise=0.212121 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9056 x 2.073 at -5.59 degrees (North through East)
! Clean map  min=-0.0012581  max=0.10994 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6677 mas, bmaj=1.723 mas, bpa=-5.745 degrees
! Estimated noise=0.389493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0806753 Jy
! Component: 100  -  total flux cleaned = 0.107034 Jy
! Component: 150  -  total flux cleaned = 0.124265 Jy
! Component: 200  -  total flux cleaned = 0.136297 Jy
! Total flux subtracted in 200 components = 0.136297 Jy
! Clean residual min=-0.004846 max=0.006751 Jy/beam
! Clean residual mean=0.000007 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.136297 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.136297 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=2.073 mas, bpa=-5.59 degrees
! Estimated noise=0.212121 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135518 Jy
! Component: 100  -  total flux cleaned = 0.0234656 Jy
! Component: 150  -  total flux cleaned = 0.0311365 Jy
! Component: 200  -  total flux cleaned = 0.0371863 Jy
! Total flux subtracted in 200 components = 0.0371863 Jy
! Clean residual min=-0.002647 max=0.003587 Jy/beam
! Clean residual mean=0.000008 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.173484 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 50 components and 0.173484 Jy
! Inverting map 
! Added new window around map position (-3.2, -11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00482813 Jy
! Component: 100  -  total flux cleaned = 0.00871233 Jy
! Component: 150  -  total flux cleaned = 0.0118898 Jy
! Component: 200  -  total flux cleaned = 0.014559 Jy
! Total flux subtracted in 200 components = 0.014559 Jy
! Clean residual min=-0.001878 max=0.001859 Jy/beam
! Clean residual mean=0.000004 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.188043 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 80 components and 0.188043 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.228 mas, bmaj=3.231 mas, bpa=9.977 degrees
! Estimated noise=0.262352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353455 Jy
! Component: 100  -  total flux cleaned = 0.00605742 Jy
! Component: 150  -  total flux cleaned = 0.00794325 Jy
! Component: 200  -  total flux cleaned = 0.00943495 Jy
! Total flux subtracted in 200 components = 0.00943495 Jy
! Clean residual min=-0.001748 max=0.001575 Jy/beam
! Clean residual mean=0.000003 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.197478 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012003 Jy
! Component: 100  -  total flux cleaned = 0.00218343 Jy
! Component: 150  -  total flux cleaned = 0.00265195 Jy
! Component: 200  -  total flux cleaned = 0.003003 Jy
! Total flux subtracted in 200 components = 0.003003 Jy
! Clean residual min=-0.001550 max=0.001385 Jy/beam
! Clean residual mean=0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.20048 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 150 components and 0.200481 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9056 mas, bmaj=2.073 mas, bpa=-5.59 degrees
! Estimated noise=0.212121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000592773 Jy
! Component: 100  -  total flux cleaned = 0.000596557 Jy
! Component: 150  -  total flux cleaned = 0.000665726 Jy
! Component: 200  -  total flux cleaned = 0.000791903 Jy
! Total flux subtracted in 200 components = 0.000791903 Jy
! Clean residual min=-0.001163 max=0.001203 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.201272 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 171 components and 0.201272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068959Jy  sigma=1.381612
! Fit after  self-cal, rms=0.068940Jy  sigma=1.381448
wmodel /J1001+1015_X_map.mod
! wmodel: Unable to open new model file: /J1001+1015_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J1001+1015_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9056 x 2.073 at -5.59 degrees (North through East)
! Clean map  min=-0.0010955  max=0.1106 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J1001+1015_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110597 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000296325 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.803794 0.803794 1.60759 3.21518 6.43035 12.8607 25.7214 51.4428
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  373.23 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J1001+1015_X_dfm.log closed on Thu May 19 23:14:44 2016