! Started logfile: /scr/pima/bg219i_uvs/J0941+2728_X_dfm.log on Thu May 19 23:13:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0941+2728_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0941+2728_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.82439 visibilities/baseline/integration-bin.
! Found source: J0941+2728
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18252 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0941+2728_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004574Jy  sigma=24.820817
! Fit after  self-cal, rms=0.842383Jy  sigma=20.742991
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7941 mas, bmaj=1.401 mas, bpa=1.851 degrees
! Estimated noise=0.447316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119934 Jy
! Component: 100  -  total flux cleaned = 0.147679 Jy
! Total flux subtracted in 100 components = 0.147679 Jy
! Clean residual min=-0.004736 max=0.012777 Jy/beam
! Clean residual mean=0.000012 rms=0.001411 Jy/beam
! Combined flux in latest and established models = 0.147679 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.147679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064222Jy  sigma=1.520138
! Fit after  self-cal, rms=0.064199Jy  sigma=1.519389
! Inverting map 
! Added new window around map position (1.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136497 Jy
! Component: 100  -  total flux cleaned = 0.0216858 Jy
! Total flux subtracted in 100 components = 0.0216858 Jy
! Clean residual min=-0.003887 max=0.004769 Jy/beam
! Clean residual mean=0.000007 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.169365 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.169365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060388Jy  sigma=1.413847
! Fit after  self-cal, rms=0.060268Jy  sigma=1.410335
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00586274 Jy
! Component: 100  -  total flux cleaned = 0.00955158 Jy
! Total flux subtracted in 100 components = 0.00955158 Jy
! Clean residual min=-0.003572 max=0.003236 Jy/beam
! Clean residual mean=0.000004 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.178917 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.178917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059515Jy  sigma=1.389539
! Fit after  self-cal, rms=0.059487Jy  sigma=1.388656
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.734 mas, bpa=1.411 degrees
! Estimated noise=0.219291 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398341 Jy
! Component: 100  -  total flux cleaned = 0.0062367 Jy
! Component: 150  -  total flux cleaned = 0.00767948 Jy
! Component: 200  -  total flux cleaned = 0.00862176 Jy
! Total flux subtracted in 200 components = 0.00862176 Jy
! Clean residual min=-0.001746 max=0.001840 Jy/beam
! Clean residual mean=0.000003 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.187538 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 44 components and 0.187538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059221Jy  sigma=1.381375
! Fit after  self-cal, rms=0.059215Jy  sigma=1.381016
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.022 x 1.734 at 1.411 degrees (North through East)
! Clean map  min=-0.0016832  max=0.15794 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.02     KP        1.01     
!   LA        0.96     MK        1.03     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.05     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.10     KP        1.03     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.98     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.03     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.03     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.01     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.02     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        1.00     
!   LA        0.97     MK        0.98     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.03     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.98     KP        1.03     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.95     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.059215Jy  sigma=1.381016
! Fit after  self-cal, rms=0.058929Jy  sigma=1.376025
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=1.736 mas, bpa=1.654 degrees
! Estimated noise=0.218767 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421068 Jy
! Component: 100  -  total flux cleaned = -0.000452903 Jy
! Component: 150  -  total flux cleaned = -0.000434621 Jy
! Component: 200  -  total flux cleaned = -0.000419456 Jy
! Total flux subtracted in 200 components = -0.000419456 Jy
! Clean residual min=-0.001459 max=0.001215 Jy/beam
! Clean residual mean=0.000003 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.187119 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.187119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058911Jy  sigma=1.375571
! Fit after  self-cal, rms=0.058919Jy  sigma=1.375525
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058919Jy  sigma=1.375525
! Fit after  self-cal, rms=0.058929Jy  sigma=1.372860
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=1.731 mas, bpa=1.571 degrees
! Estimated noise=0.21855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000219344 Jy
! Component: 100  -  total flux cleaned = -0.00020512 Jy
! Component: 150  -  total flux cleaned = -0.000179658 Jy
! Component: 200  -  total flux cleaned = -0.000167817 Jy
! Total flux subtracted in 200 components = -0.000167817 Jy
! Clean residual min=-0.001332 max=0.001307 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.186951 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.186951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058923Jy  sigma=1.372702
! Fit after  self-cal, rms=0.058927Jy  sigma=1.372676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.89256e-06 Jy
! Component: 100  -  total flux cleaned = 9.99462e-08 Jy
! Component: 150  -  total flux cleaned = 8.97806e-06 Jy
! Component: 200  -  total flux cleaned = 1.63827e-05 Jy
! Total flux subtracted in 200 components = 1.63827e-05 Jy
! Clean residual min=-0.001324 max=0.001297 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.186967 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.186967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058924Jy  sigma=1.372610
! Fit after  self-cal, rms=0.058923Jy  sigma=1.372605
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058923Jy  sigma=1.372605
! Fit after  self-cal, rms=0.058959Jy  sigma=1.372570
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=1.73 mas, bpa=1.568 degrees
! Estimated noise=0.218473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209171 Jy
! Component: 100  -  total flux cleaned = -0.000219623 Jy
! Component: 150  -  total flux cleaned = -0.000219601 Jy
! Component: 200  -  total flux cleaned = -0.00022013 Jy
! Total flux subtracted in 200 components = -0.00022013 Jy
! Clean residual min=-0.001307 max=0.001292 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.186747 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 67 components and 0.186747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058955Jy  sigma=1.372505
! Fit after  self-cal, rms=0.058956Jy  sigma=1.372500
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.31069e-05 Jy
! Component: 100  -  total flux cleaned = -3.33311e-05 Jy
! Component: 150  -  total flux cleaned = -3.30126e-05 Jy
! Component: 200  -  total flux cleaned = -2.75206e-05 Jy
! Total flux subtracted in 200 components = -2.75206e-05 Jy
! Clean residual min=-0.001300 max=0.001289 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.18672 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.18672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058954Jy  sigma=1.372467
! Fit after  self-cal, rms=0.058954Jy  sigma=1.372463
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058954Jy  sigma=1.372463
! Fit after  self-cal, rms=0.058974Jy  sigma=1.372439
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.873 mas, bpa=5.842 degrees
! Estimated noise=0.264993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190018 Jy
! Component: 100  -  total flux cleaned = -0.000204791 Jy
! Component: 150  -  total flux cleaned = -0.000212687 Jy
! Component: 200  -  total flux cleaned = -0.000215899 Jy
! Total flux subtracted in 200 components = -0.000215899 Jy
! Clean residual min=-0.001415 max=0.001353 Jy/beam
! Clean residual mean=0.000002 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.186504 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 72 components and 0.186504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058973Jy  sigma=1.372434
! Fit after  self-cal, rms=0.058973Jy  sigma=1.372432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.03008e-06 Jy
! Component: 100  -  total flux cleaned = 8.49501e-06 Jy
! Component: 150  -  total flux cleaned = 8.2531e-06 Jy
! Component: 200  -  total flux cleaned = 5.92054e-06 Jy
! Total flux subtracted in 200 components = 5.92054e-06 Jy
! Clean residual min=-0.001421 max=0.001349 Jy/beam
! Clean residual mean=0.000002 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.18651 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 73 components and 0.18651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058974Jy  sigma=1.372438
! Fit after  self-cal, rms=0.058973Jy  sigma=1.372437
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=1.729 mas, bpa=1.579 degrees
! Estimated noise=0.218402 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 1.729 at 1.579 degrees (North through East)
! Clean map  min=-0.0012236  max=0.15729 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7986 mas, bmaj=1.398 mas, bpa=2.059 degrees
! Estimated noise=0.447127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.119681 Jy
! Component: 100  -  total flux cleaned = 0.148212 Jy
! Component: 150  -  total flux cleaned = 0.161855 Jy
! Component: 200  -  total flux cleaned = 0.170005 Jy
! Total flux subtracted in 200 components = 0.170005 Jy
! Clean residual min=-0.003039 max=0.004198 Jy/beam
! Clean residual mean=0.000005 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.170005 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.170005 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=1.729 mas, bpa=1.579 degrees
! Estimated noise=0.218402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00680751 Jy
! Component: 100  -  total flux cleaned = 0.0103605 Jy
! Component: 150  -  total flux cleaned = 0.0124491 Jy
! Component: 200  -  total flux cleaned = 0.0138017 Jy
! Total flux subtracted in 200 components = 0.0138017 Jy
! Clean residual min=-0.001413 max=0.001255 Jy/beam
! Clean residual mean=0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.183807 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 39 components and 0.183807 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.873 mas, bpa=5.842 degrees
! Estimated noise=0.264993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124683 Jy
! Component: 100  -  total flux cleaned = 0.00186765 Jy
! Component: 150  -  total flux cleaned = 0.00220863 Jy
! Component: 200  -  total flux cleaned = 0.00239866 Jy
! Total flux subtracted in 200 components = 0.00239866 Jy
! Clean residual min=-0.001410 max=0.001387 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.186205 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.63212e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112487 Jy
! Component: 150  -  total flux cleaned = 0.000124375 Jy
! Component: 200  -  total flux cleaned = 0.000132907 Jy
! Total flux subtracted in 200 components = 0.000132907 Jy
! Clean residual min=-0.001418 max=0.001384 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.186338 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 61 components and 0.186338 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=1.729 mas, bpa=1.579 degrees
! Estimated noise=0.218402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182302 Jy
! Component: 100  -  total flux cleaned = -0.000186132 Jy
! Component: 150  -  total flux cleaned = -0.000135148 Jy
! Component: 200  -  total flux cleaned = -0.000101483 Jy
! Total flux subtracted in 200 components = -0.000101483 Jy
! Clean residual min=-0.001325 max=0.001282 Jy/beam
! Clean residual mean=0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.186237 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 68 components and 0.186237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058979Jy  sigma=1.372577
! Fit after  self-cal, rms=0.058976Jy  sigma=1.372564
wmodel /J0941+2728_X_map.mod
! wmodel: Unable to open new model file: /J0941+2728_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0941+2728_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 1.729 at 1.579 degrees (North through East)
! Clean map  min=-0.0012224  max=0.15753 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0941+2728_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.15753 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00029534 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.562444 0.562444 1.12489 2.24978 4.49955 8.99911 17.9982 35.9964 71.9929
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  533.386 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0941+2728_X_dfm.log closed on Thu May 19 23:13:49 2016