! Started logfile: /scr/pima/bg219i_uvs/J0932-2016_X_dfm.log on Thu May 19 23:13:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0932-2016_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0932-2016_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.847863 visibilities/baseline/integration-bin.
! Found source: J0932-2016
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23808 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0932-2016_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008089Jy  sigma=21.255031
! Fit after  self-cal, rms=0.884931Jy  sigma=18.524302
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6302 mas, bmaj=1.63 mas, bpa=-1.945 degrees
! Estimated noise=0.412619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0777889 Jy
! Component: 100  -  total flux cleaned = 0.106587 Jy
! Total flux subtracted in 100 components = 0.106587 Jy
! Clean residual min=-0.008572 max=0.026412 Jy/beam
! Clean residual mean=-0.000015 rms=0.002132 Jy/beam
! Combined flux in latest and established models = 0.106587 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.106587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088508Jy  sigma=1.751029
! Fit after  self-cal, rms=0.088325Jy  sigma=1.747961
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024543 Jy
! Component: 100  -  total flux cleaned = 0.0381246 Jy
! Total flux subtracted in 100 components = 0.0381246 Jy
! Clean residual min=-0.004743 max=0.013041 Jy/beam
! Clean residual mean=-0.000008 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 0.144711 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.144711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078275Jy  sigma=1.493369
! Fit after  self-cal, rms=0.077772Jy  sigma=1.481877
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103165 Jy
! Component: 100  -  total flux cleaned = 0.0166395 Jy
! Total flux subtracted in 100 components = 0.0166395 Jy
! Clean residual min=-0.003666 max=0.008984 Jy/beam
! Clean residual mean=-0.000005 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.161351 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.161351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075721Jy  sigma=1.423729
! Fit after  self-cal, rms=0.075606Jy  sigma=1.420915
! Inverting map 
! Added new window around map position (0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00734813 Jy
! Component: 100  -  total flux cleaned = 0.0121959 Jy
! Total flux subtracted in 100 components = 0.0121959 Jy
! Clean residual min=-0.003436 max=0.004066 Jy/beam
! Clean residual mean=-0.000003 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.173547 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 0.173547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074609Jy  sigma=1.393840
! Fit after  self-cal, rms=0.074581Jy  sigma=1.393283
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8139 mas, bmaj=1.979 mas, bpa=-0.6682 degrees
! Estimated noise=0.236728 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00592876 Jy
! Component: 100  -  total flux cleaned = 0.00964639 Jy
! Component: 150  -  total flux cleaned = 0.0122194 Jy
! Component: 200  -  total flux cleaned = 0.0140549 Jy
! Total flux subtracted in 200 components = 0.0140549 Jy
! Clean residual min=-0.002198 max=0.003131 Jy/beam
! Clean residual mean=0.000000 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.187602 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 67 components and 0.187602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074105Jy  sigma=1.379331
! Fit after  self-cal, rms=0.074068Jy  sigma=1.378522
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8139 x 1.979 at -0.6682 degrees (North through East)
! Clean map  min=-0.0020229  max=0.11263 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.12     KP        0.94     
!   LA        0.95     MK        0.94     NL        0.97     OV        1.00     
!   PT        1.05     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.10     KP        0.94     
!   LA        0.95     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.04     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.07     KP        0.99     
!   LA        0.96     MK        0.97     NL        0.98     OV        0.97     
!   PT        1.04     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.15     KP        0.96     
!   LA        0.96     MK        1.01     NL        0.98     OV        0.96     
!   PT        1.04     SC        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.07     KP        0.99     
!   LA        0.94     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.07     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.06     KP        1.01     
!   LA        0.97     MK        1.05     NL        1.01     OV        0.94     
!   PT        1.07     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.95     
!   PT        1.09     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.01     KP        0.97     
!   LA        0.96     MK        0.96     NL        1.01     OV        0.97     
!   PT        1.09     SC        0.93     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.11     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.13     KP        1.01     
!   LA        0.97     MK        0.95     NL        0.97     OV        0.97     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.09     KP        0.97     
!   LA        0.98     MK        0.94     NL        1.00     OV        0.95     
!   PT        1.06     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.01     KP        0.98     
!   LA        0.95     MK        1.04     NL        1.00     OV        0.95     
!   PT        1.06     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.074068Jy  sigma=1.378522
! Fit after  self-cal, rms=0.074933Jy  sigma=1.370035
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8091 mas, bmaj=1.962 mas, bpa=-0.06623 degrees
! Estimated noise=0.232632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000671569 Jy
! Component: 100  -  total flux cleaned = 0.000913551 Jy
! Component: 150  -  total flux cleaned = 0.0011043 Jy
! Component: 200  -  total flux cleaned = 0.00128858 Jy
! Total flux subtracted in 200 components = 0.00128858 Jy
! Clean residual min=-0.001681 max=0.002039 Jy/beam
! Clean residual mean=0.000005 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.18889 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.18889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074872Jy  sigma=1.369007
! Fit after  self-cal, rms=0.074940Jy  sigma=1.368741
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074940Jy  sigma=1.368741
! Fit after  self-cal, rms=0.076554Jy  sigma=1.362303
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8075 mas, bmaj=1.957 mas, bpa=-0.1617 degrees
! Estimated noise=0.232036 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101599 Jy
! Component: 100  -  total flux cleaned = 0.00129372 Jy
! Component: 150  -  total flux cleaned = 0.00141602 Jy
! Component: 200  -  total flux cleaned = 0.00146934 Jy
! Total flux subtracted in 200 components = 0.00146934 Jy
! Clean residual min=-0.001342 max=0.001449 Jy/beam
! Clean residual mean=0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.19036 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 0.19036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076533Jy  sigma=1.361883
! Fit after  self-cal, rms=0.076584Jy  sigma=1.361730
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19.4, -44.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124671 Jy
! Component: 100  -  total flux cleaned = 0.00163275 Jy
! Component: 150  -  total flux cleaned = 0.0019553 Jy
! Component: 200  -  total flux cleaned = 0.0020756 Jy
! Total flux subtracted in 200 components = 0.0020756 Jy
! Clean residual min=-0.001280 max=0.001384 Jy/beam
! Clean residual mean=0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.192435 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 106 components and 0.192435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076562Jy  sigma=1.361144
! Fit after  self-cal, rms=0.076560Jy  sigma=1.361084
! Inverting map 
! Added new window around map position (-14.4, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110995 Jy
! Component: 100  -  total flux cleaned = 0.00130657 Jy
! Component: 150  -  total flux cleaned = 0.00147301 Jy
! Component: 200  -  total flux cleaned = 0.00166186 Jy
! Total flux subtracted in 200 components = 0.00166186 Jy
! Clean residual min=-0.001257 max=0.001120 Jy/beam
! Clean residual mean=0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.194097 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 120 components and 0.194097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076530Jy  sigma=1.360540
! Fit after  self-cal, rms=0.076526Jy  sigma=1.360501
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076526Jy  sigma=1.360501
! Fit after  self-cal, rms=0.076474Jy  sigma=1.360383
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8064 mas, bmaj=1.952 mas, bpa=-0.09806 degrees
! Estimated noise=0.23129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534097 Jy
! Component: 100  -  total flux cleaned = 0.000755314 Jy
! Component: 150  -  total flux cleaned = 0.000915588 Jy
! Component: 200  -  total flux cleaned = 0.000997371 Jy
! Total flux subtracted in 200 components = 0.000997371 Jy
! Clean residual min=-0.001198 max=0.001086 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.195094 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 136 components and 0.195094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076463Jy  sigma=1.360193
! Fit after  self-cal, rms=0.076464Jy  sigma=1.360182
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116976 Jy
! Component: 100  -  total flux cleaned = 0.000148416 Jy
! Component: 150  -  total flux cleaned = 0.000192178 Jy
! Component: 200  -  total flux cleaned = 0.000192127 Jy
! Total flux subtracted in 200 components = 0.000192127 Jy
! Clean residual min=-0.001202 max=0.001070 Jy/beam
! Clean residual mean=0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.195287 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 146 components and 0.195287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076458Jy  sigma=1.360073
! Fit after  self-cal, rms=0.076457Jy  sigma=1.360070
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076457Jy  sigma=1.360070
! Fit after  self-cal, rms=0.076369Jy  sigma=1.360053
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=4.513 mas, bpa=6.296 degrees
! Estimated noise=0.306333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.77584e-05 Jy
! Component: 100  -  total flux cleaned = 7.77217e-05 Jy
! Component: 150  -  total flux cleaned = 6.38253e-05 Jy
! Component: 200  -  total flux cleaned = 7.50367e-05 Jy
! Total flux subtracted in 200 components = 7.50367e-05 Jy
! Clean residual min=-0.001329 max=0.001057 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.195362 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 154 components and 0.195362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076368Jy  sigma=1.360041
! Fit after  self-cal, rms=0.076367Jy  sigma=1.360025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.0644e-05 Jy
! Component: 100  -  total flux cleaned = 5.09949e-05 Jy
! Component: 150  -  total flux cleaned = 8.8362e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105055 Jy
! Total flux subtracted in 200 components = 0.000105055 Jy
! Clean residual min=-0.001323 max=0.001065 Jy/beam
! Clean residual mean=0.000002 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.195467 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 161 components and 0.195467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076366Jy  sigma=1.360040
! Fit after  self-cal, rms=0.076366Jy  sigma=1.360032
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8059 mas, bmaj=1.951 mas, bpa=-0.07149 degrees
! Estimated noise=0.230954 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8059 x 1.951 at -0.07149 degrees (North through East)
! Clean map  min=-0.0010616  max=0.11108 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6257 mas, bmaj=1.611 mas, bpa=-1.257 degrees
! Estimated noise=0.396931 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0756464 Jy
! Component: 100  -  total flux cleaned = 0.108593 Jy
! Component: 150  -  total flux cleaned = 0.129381 Jy
! Component: 200  -  total flux cleaned = 0.143327 Jy
! Total flux subtracted in 200 components = 0.143327 Jy
! Clean residual min=-0.004227 max=0.007582 Jy/beam
! Clean residual mean=-0.000008 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.143327 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.143327 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8059 mas, bmaj=1.951 mas, bpa=-0.07149 degrees
! Estimated noise=0.230954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161884 Jy
! Component: 100  -  total flux cleaned = 0.0252242 Jy
! Component: 150  -  total flux cleaned = 0.031138 Jy
! Component: 200  -  total flux cleaned = 0.0351642 Jy
! Total flux subtracted in 200 components = 0.0351642 Jy
! Clean residual min=-0.001723 max=0.002328 Jy/beam
! Clean residual mean=-0.000004 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.178492 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 56 components and 0.178492 Jy
! Inverting map 
! Added new window around map position (-0.4, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290244 Jy
! Component: 100  -  total flux cleaned = 0.00509673 Jy
! Component: 150  -  total flux cleaned = 0.00689333 Jy
! Component: 200  -  total flux cleaned = 0.00839163 Jy
! Total flux subtracted in 200 components = 0.00839163 Jy
! Clean residual min=-0.001337 max=0.001305 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.186883 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 93 components and 0.186883 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=4.513 mas, bpa=6.296 degrees
! Estimated noise=0.306333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020295 Jy
! Component: 100  -  total flux cleaned = 0.00333443 Jy
! Component: 150  -  total flux cleaned = 0.00432562 Jy
! Component: 200  -  total flux cleaned = 0.00493978 Jy
! Total flux subtracted in 200 components = 0.00493978 Jy
! Clean residual min=-0.001308 max=0.001317 Jy/beam
! Clean residual mean=0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.191823 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354883 Jy
! Component: 100  -  total flux cleaned = 0.000659305 Jy
! Component: 150  -  total flux cleaned = 0.000903043 Jy
! Component: 200  -  total flux cleaned = 0.00109932 Jy
! Total flux subtracted in 200 components = 0.00109932 Jy
! Clean residual min=-0.001207 max=0.001196 Jy/beam
! Clean residual mean=0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.192922 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 147 components and 0.192922 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8059 mas, bmaj=1.951 mas, bpa=-0.07149 degrees
! Estimated noise=0.230954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000384877 Jy
! Component: 100  -  total flux cleaned = 0.000639898 Jy
! Component: 150  -  total flux cleaned = 0.000861058 Jy
! Component: 200  -  total flux cleaned = 0.000961017 Jy
! Total flux subtracted in 200 components = 0.000961017 Jy
! Clean residual min=-0.001261 max=0.001113 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.193883 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 162 components and 0.193883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076362Jy  sigma=1.360155
! Fit after  self-cal, rms=0.076355Jy  sigma=1.360022
wmodel /J0932-2016_X_map.mod
! wmodel: Unable to open new model file: /J0932-2016_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0932-2016_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8059 x 1.951 at -0.07149 degrees (North through East)
! Clean map  min=-0.0010897  max=0.11254 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0932-2016_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.11254 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270622 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.721401 0.721401 1.4428 2.8856 5.77121 11.5424 23.0848 46.1697 92.3393
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.112 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  415.857 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0932-2016_X_dfm.log closed on Thu May 19 23:13:34 2016