! Started logfile: /scr/pima/bg219i_uvs/J0923-2135_X_dfm.log on Thu May 19 23:12:52 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0923-2135_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0923-2135_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.879365 visibilities/baseline/integration-bin.
! Found source: J0923-2135
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13296 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0923-2135_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012638Jy  sigma=20.954470
! Fit after  self-cal, rms=0.866433Jy  sigma=17.823108
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.632 mas, bmaj=1.641 mas, bpa=-1.474 degrees
! Estimated noise=0.573643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0927328 Jy
! Component: 100  -  total flux cleaned = 0.129424 Jy
! Total flux subtracted in 100 components = 0.129424 Jy
! Clean residual min=-0.010037 max=0.029103 Jy/beam
! Clean residual mean=-0.000018 rms=0.002593 Jy/beam
! Combined flux in latest and established models = 0.129424 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.129424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092891Jy  sigma=1.813415
! Fit after  self-cal, rms=0.092373Jy  sigma=1.804831
! Inverting map 
! Added new window around map position (0.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282105 Jy
! Component: 100  -  total flux cleaned = 0.0440657 Jy
! Total flux subtracted in 100 components = 0.0440657 Jy
! Clean residual min=-0.005907 max=0.015120 Jy/beam
! Clean residual mean=-0.000009 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.17349 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.17349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080403Jy  sigma=1.497508
! Fit after  self-cal, rms=0.079853Jy  sigma=1.484413
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120006 Jy
! Component: 100  -  total flux cleaned = 0.0191969 Jy
! Total flux subtracted in 100 components = 0.0191969 Jy
! Clean residual min=-0.004648 max=0.008910 Jy/beam
! Clean residual mean=-0.000005 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.192687 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.192687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077529Jy  sigma=1.413914
! Fit after  self-cal, rms=0.077427Jy  sigma=1.411245
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8344 mas, bmaj=2.027 mas, bpa=-0.7871 degrees
! Estimated noise=0.338001 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00806712 Jy
! Component: 100  -  total flux cleaned = 0.0119385 Jy
! Component: 150  -  total flux cleaned = 0.0140417 Jy
! Component: 200  -  total flux cleaned = 0.0144405 Jy
! Total flux subtracted in 200 components = 0.0144405 Jy
! Clean residual min=-0.003223 max=0.004792 Jy/beam
! Clean residual mean=0.000000 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.207127 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 33 components and 0.207127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076884Jy  sigma=1.388701
! Fit after  self-cal, rms=0.076834Jy  sigma=1.387043
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8344 x 2.027 at -0.7871 degrees (North through East)
! Clean map  min=-0.0030179  max=0.13157 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.10     KP        0.95     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.97     
!   PT        1.05     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.13     KP        1.01     
!   LA        0.96     MK        1.16     NL        1.02     OV        0.94     
!   PT        1.09     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.19     KP        1.01     
!   LA        0.99     MK        1.01     NL        0.96     OV        0.99     
!   PT        1.07     SC        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.05     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.96     
!   PT        1.09     SC        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.13     KP        1.01     
!   LA        0.97     MK        0.95     NL        0.99     OV        0.98     
!   PT        1.08     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.11     KP        0.97     
!   LA        0.97     MK        0.91     NL        1.01     OV        0.94     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.06     KP        1.01     
!   LA        0.97     MK        0.96     NL        1.07     OV        0.96     
!   PT        1.08     SC        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.06     KP        0.96     
!   LA        0.96     MK        0.99     NL        1.03     OV        0.95     
!   PT        1.05     SC        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        1.13     KP        0.98     
!   LA        0.96     MK        0.97     NL        1.02     OV        0.99     
!   PT        1.13     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.05     KP        1.03     
!   LA        0.95     MK        1.04     NL        0.98     OV        0.94     
!   PT        1.09     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.076834Jy  sigma=1.387043
! Fit after  self-cal, rms=0.078331Jy  sigma=1.374741
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8334 mas, bmaj=2.013 mas, bpa=-0.216 degrees
! Estimated noise=0.334756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (44.2, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220845 Jy
! Component: 100  -  total flux cleaned = 0.00288673 Jy
! Component: 150  -  total flux cleaned = 0.00330171 Jy
! Component: 200  -  total flux cleaned = 0.00348242 Jy
! Total flux subtracted in 200 components = 0.00348242 Jy
! Clean residual min=-0.002441 max=0.003094 Jy/beam
! Clean residual mean=0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.21061 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 51 components and 0.21061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078070Jy  sigma=1.371674
! Fit after  self-cal, rms=0.078153Jy  sigma=1.370901
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078153Jy  sigma=1.370901
! Fit after  self-cal, rms=0.078238Jy  sigma=1.372735
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.005 mas, bpa=-0.3018 degrees
! Estimated noise=0.331996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113353 Jy
! Component: 100  -  total flux cleaned = 0.00176219 Jy
! Component: 150  -  total flux cleaned = 0.00225501 Jy
! Component: 200  -  total flux cleaned = 0.00244601 Jy
! Total flux subtracted in 200 components = 0.00244601 Jy
! Clean residual min=-0.002713 max=0.003017 Jy/beam
! Clean residual mean=0.000001 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.213056 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.213056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078133Jy  sigma=1.371413
! Fit after  self-cal, rms=0.078160Jy  sigma=1.371026
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262016 Jy
! Component: 100  -  total flux cleaned = 0.00357041 Jy
! Component: 150  -  total flux cleaned = 0.00382121 Jy
! Component: 200  -  total flux cleaned = 0.00412511 Jy
! Total flux subtracted in 200 components = 0.00412511 Jy
! Clean residual min=-0.002632 max=0.002232 Jy/beam
! Clean residual mean=0.000000 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.217181 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 0.217181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078015Jy  sigma=1.369067
! Fit after  self-cal, rms=0.078005Jy  sigma=1.368599
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078005Jy  sigma=1.368599
! Fit after  self-cal, rms=0.077356Jy  sigma=1.368226
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8236 mas, bmaj=1.998 mas, bpa=-0.4259 degrees
! Estimated noise=0.329941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000828691 Jy
! Component: 100  -  total flux cleaned = 0.00128876 Jy
! Component: 150  -  total flux cleaned = 0.00152794 Jy
! Component: 200  -  total flux cleaned = 0.00178169 Jy
! Total flux subtracted in 200 components = 0.00178169 Jy
! Clean residual min=-0.002631 max=0.002239 Jy/beam
! Clean residual mean=0.000000 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.218962 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 87 components and 0.218962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077287Jy  sigma=1.367414
! Fit after  self-cal, rms=0.077284Jy  sigma=1.367333
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337125 Jy
! Component: 100  -  total flux cleaned = 0.000537009 Jy
! Component: 150  -  total flux cleaned = 0.000598548 Jy
! Component: 200  -  total flux cleaned = 0.000657353 Jy
! Total flux subtracted in 200 components = 0.000657353 Jy
! Clean residual min=-0.002627 max=0.002257 Jy/beam
! Clean residual mean=-0.000000 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.21962 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 92 components and 0.21962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077250Jy  sigma=1.366907
! Fit after  self-cal, rms=0.077251Jy  sigma=1.366879
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077251Jy  sigma=1.366879
! Fit after  self-cal, rms=0.077063Jy  sigma=1.366375
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.116 mas, bmaj=4.697 mas, bpa=3.882 degrees
! Estimated noise=0.437311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000918689 Jy
! Component: 100  -  total flux cleaned = 0.00108269 Jy
! Component: 150  -  total flux cleaned = 0.00110608 Jy
! Component: 200  -  total flux cleaned = 0.00112795 Jy
! Total flux subtracted in 200 components = 0.00112795 Jy
! Clean residual min=-0.003457 max=0.002342 Jy/beam
! Clean residual mean=0.000002 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.220748 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 105 components and 0.220748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077043Jy  sigma=1.366296
! Fit after  self-cal, rms=0.077046Jy  sigma=1.366258
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127835 Jy
! Component: 100  -  total flux cleaned = 0.000127696 Jy
! Component: 150  -  total flux cleaned = 0.000128073 Jy
! Component: 200  -  total flux cleaned = 0.000108211 Jy
! Total flux subtracted in 200 components = 0.000108211 Jy
! Clean residual min=-0.003427 max=0.002338 Jy/beam
! Clean residual mean=0.000001 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.220856 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 108 components and 0.220856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077033Jy  sigma=1.366223
! Fit after  self-cal, rms=0.077035Jy  sigma=1.366210
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=1.993 mas, bpa=-0.5327 degrees
! Estimated noise=0.328375 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8209 x 1.993 at -0.5327 degrees (North through East)
! Clean map  min=-0.0024236  max=0.12504 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6238 mas, bmaj=1.626 mas, bpa=-1.426 degrees
! Estimated noise=0.547086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0896577 Jy
! Component: 100  -  total flux cleaned = 0.130662 Jy
! Component: 150  -  total flux cleaned = 0.155647 Jy
! Component: 200  -  total flux cleaned = 0.1722 Jy
! Total flux subtracted in 200 components = 0.1722 Jy
! Clean residual min=-0.005092 max=0.008927 Jy/beam
! Clean residual mean=-0.000008 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.1722 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.1722 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=1.993 mas, bpa=-0.5327 degrees
! Estimated noise=0.328375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174068 Jy
! Component: 100  -  total flux cleaned = 0.0266916 Jy
! Component: 150  -  total flux cleaned = 0.0324954 Jy
! Component: 200  -  total flux cleaned = 0.0366565 Jy
! Total flux subtracted in 200 components = 0.0366565 Jy
! Clean residual min=-0.002834 max=0.003637 Jy/beam
! Clean residual mean=-0.000001 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.208857 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 55 components and 0.208857 Jy
! Inverting map 
! Added new window around map position (-1, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347647 Jy
! Component: 100  -  total flux cleaned = 0.00593659 Jy
! Component: 150  -  total flux cleaned = 0.00789125 Jy
! Component: 200  -  total flux cleaned = 0.00929878 Jy
! Total flux subtracted in 200 components = 0.00929878 Jy
! Clean residual min=-0.002303 max=0.002411 Jy/beam
! Clean residual mean=0.000000 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.218155 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 80 components and 0.218155 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.116 mas, bmaj=4.697 mas, bpa=3.882 degrees
! Estimated noise=0.437311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188532 Jy
! Component: 100  -  total flux cleaned = 0.00240026 Jy
! Component: 150  -  total flux cleaned = 0.00265802 Jy
! Component: 200  -  total flux cleaned = 0.00272266 Jy
! Total flux subtracted in 200 components = 0.00272266 Jy
! Clean residual min=-0.003463 max=0.002368 Jy/beam
! Clean residual mean=0.000002 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.220878 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.83125e-05 Jy
! Component: 100  -  total flux cleaned = 8.4861e-05 Jy
! Component: 150  -  total flux cleaned = 0.000108773 Jy
! Component: 200  -  total flux cleaned = 0.000131776 Jy
! Total flux subtracted in 200 components = 0.000131776 Jy
! Clean residual min=-0.003439 max=0.002354 Jy/beam
! Clean residual mean=0.000002 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.22101 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 95 components and 0.22101 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8209 mas, bmaj=1.993 mas, bpa=-0.5327 degrees
! Estimated noise=0.328375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.77921e-05 Jy
! Component: 100  -  total flux cleaned = 0.000212229 Jy
! Component: 150  -  total flux cleaned = 0.000314592 Jy
! Component: 200  -  total flux cleaned = 0.000345702 Jy
! Total flux subtracted in 200 components = 0.000345702 Jy
! Clean residual min=-0.002432 max=0.002362 Jy/beam
! Clean residual mean=0.000000 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.221356 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 122 components and 0.221356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077022Jy  sigma=1.365905
! Fit after  self-cal, rms=0.077005Jy  sigma=1.365602
wmodel /J0923-2135_X_map.mod
! wmodel: Unable to open new model file: /J0923-2135_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0923-2135_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8209 x 1.993 at -0.5327 degrees (North through East)
! Clean map  min=-0.002245  max=0.12397 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0923-2135_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123972 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00054056 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.3081 1.3081 2.6162 5.23239 10.4648 20.9296 41.8591 83.7183
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  229.34 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0923-2135_X_dfm.log closed on Thu May 19 23:12:54 2016