! Started logfile: /scr/pima/bg219i_uvs/J0922-3959_S_dfm.log on Thu May 19 23:12:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J0922-3959_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0922-3959_S_uva.fits
! AN table 1: 7 integrations on 21 of 21 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0922-3959
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 588 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0922-3959_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.560598Jy  sigma=14.596909
! Fit after  self-cal, rms=0.358719Jy  sigma=3.253289
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.418 mas, bmaj=16.97 mas, bpa=-2.598 degrees
! Estimated noise=4.16189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.83023 Jy
! Component: 100  -  total flux cleaned = 1.05914 Jy
! Total flux subtracted in 100 components = 1.05914 Jy
! Clean residual min=-0.071733 max=0.164940 Jy/beam
! Clean residual mean=-0.000219 rms=0.029304 Jy/beam
! Combined flux in latest and established models = 1.05914 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.05914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.320673Jy  sigma=2.886664
! Fit after  self-cal, rms=0.320637Jy  sigma=2.886380
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=18.11 mas, bpa=-3.289 degrees
! Estimated noise=3.56136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167122 Jy
! Component: 100  -  total flux cleaned = 0.268175 Jy
! Component: 150  -  total flux cleaned = 0.331153 Jy
! Component: 200  -  total flux cleaned = 0.372704 Jy
! Total flux subtracted in 200 components = 0.372704 Jy
! Clean residual min=-0.063433 max=0.087580 Jy/beam
! Clean residual mean=0.000011 rms=0.021740 Jy/beam
! Combined flux in latest and established models = 1.43185 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 46 components and 1.43185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.219353Jy  sigma=1.719255
! Fit after  self-cal, rms=0.219233Jy  sigma=1.718473
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.836 x 18.11 at -3.289 degrees (North through East)
! Clean map  min=-0.063227  max=1.1134 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.219233Jy  sigma=1.718473
! Fit after  self-cal, rms=0.219233Jy  sigma=1.718473
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=18.11 mas, bpa=-3.289 degrees
! Estimated noise=3.56136 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0290615 Jy
! Component: 100  -  total flux cleaned = 0.0420771 Jy
! Component: 150  -  total flux cleaned = 0.0472737 Jy
! Component: 200  -  total flux cleaned = 0.0500128 Jy
! Total flux subtracted in 200 components = 0.0500128 Jy
! Clean residual min=-0.059375 max=0.075628 Jy/beam
! Clean residual mean=0.000085 rms=0.020292 Jy/beam
! Combined flux in latest and established models = 1.48186 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 62 components and 1.48186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.213949Jy  sigma=1.648430
! Fit after  self-cal, rms=0.213976Jy  sigma=1.648150
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.213976Jy  sigma=1.648150
! Fit after  self-cal, rms=0.209201Jy  sigma=1.601490
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.843 mas, bmaj=18.23 mas, bpa=-3.159 degrees
! Estimated noise=3.58067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00339463 Jy
! Component: 100  -  total flux cleaned = -0.00399302 Jy
! Component: 150  -  total flux cleaned = -0.00457242 Jy
! Component: 200  -  total flux cleaned = -0.00402872 Jy
! Total flux subtracted in 200 components = -0.00402872 Jy
! Clean residual min=-0.055382 max=0.059868 Jy/beam
! Clean residual mean=0.000072 rms=0.018439 Jy/beam
! Combined flux in latest and established models = 1.47783 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 67 components and 1.47783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205676Jy  sigma=1.578156
! Fit after  self-cal, rms=0.205744Jy  sigma=1.578054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000496285 Jy
! Component: 100  -  total flux cleaned = 0.00150982 Jy
! Component: 150  -  total flux cleaned = 0.00198671 Jy
! Component: 200  -  total flux cleaned = 0.00243843 Jy
! Total flux subtracted in 200 components = 0.00243843 Jy
! Clean residual min=-0.053309 max=0.058936 Jy/beam
! Clean residual mean=0.000082 rms=0.018123 Jy/beam
! Combined flux in latest and established models = 1.48027 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 67 components and 1.48027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203195Jy  sigma=1.563126
! Fit after  self-cal, rms=0.203217Jy  sigma=1.563101
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203217Jy  sigma=1.563101
! Fit after  self-cal, rms=0.203196Jy  sigma=1.562777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.843 mas, bmaj=18.23 mas, bpa=-3.169 degrees
! Estimated noise=3.58481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.48901e-06 Jy
! Component: 100  -  total flux cleaned = 0.000876834 Jy
! Component: 150  -  total flux cleaned = 0.00172179 Jy
! Component: 200  -  total flux cleaned = 0.00254342 Jy
! Total flux subtracted in 200 components = 0.00254342 Jy
! Clean residual min=-0.051775 max=0.057929 Jy/beam
! Clean residual mean=0.000089 rms=0.017878 Jy/beam
! Combined flux in latest and established models = 1.48281 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 1.48281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201352Jy  sigma=1.550524
! Fit after  self-cal, rms=0.201365Jy  sigma=1.550501
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000812012 Jy
! Component: 100  -  total flux cleaned = 0.00158701 Jy
! Component: 150  -  total flux cleaned = 0.00232966 Jy
! Component: 200  -  total flux cleaned = 0.00305197 Jy
! Total flux subtracted in 200 components = 0.00305197 Jy
! Clean residual min=-0.050052 max=0.056414 Jy/beam
! Clean residual mean=0.000097 rms=0.017660 Jy/beam
! Combined flux in latest and established models = 1.48587 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 68 components and 1.48587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199882Jy  sigma=1.540957
! Fit after  self-cal, rms=0.199891Jy  sigma=1.540950
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199891Jy  sigma=1.540950
! Fit after  self-cal, rms=0.192420Jy  sigma=1.447063
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.829 mas, bmaj=21.71 mas, bpa=-8.161 degrees
! Estimated noise=4.4693 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692662 Jy
! Component: 100  -  total flux cleaned = 0.00817029 Jy
! Component: 150  -  total flux cleaned = 0.00993632 Jy
! Component: 200  -  total flux cleaned = 0.0110482 Jy
! Total flux subtracted in 200 components = 0.0110482 Jy
! Clean residual min=-0.051114 max=0.052580 Jy/beam
! Clean residual mean=0.000211 rms=0.019162 Jy/beam
! Combined flux in latest and established models = 1.49691 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 73 components and 1.49691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191415Jy  sigma=1.451159
! Fit after  self-cal, rms=0.191497Jy  sigma=1.451066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105212 Jy
! Component: 100  -  total flux cleaned = 0.00207427 Jy
! Component: 150  -  total flux cleaned = 0.00304467 Jy
! Component: 200  -  total flux cleaned = 0.00397521 Jy
! Total flux subtracted in 200 components = 0.00397521 Jy
! Clean residual min=-0.049903 max=0.051125 Jy/beam
! Clean residual mean=0.000232 rms=0.018736 Jy/beam
! Combined flux in latest and established models = 1.50089 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 74 components and 1.50089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191439Jy  sigma=1.466784
! Fit after  self-cal, rms=0.191464Jy  sigma=1.466738
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.848 mas, bmaj=18.35 mas, bpa=-3.096 degrees
! Estimated noise=3.60849 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.848 x 18.35 at -3.096 degrees (North through East)
! Clean map  min=-0.0524  max=1.1181 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191464Jy  sigma=1.466738
! Fit after  self-cal, rms=0.185951Jy  sigma=1.414640
! Inverting map and beam 
! Estimated beam: bmin=3.834 mas, bmaj=18.36 mas, bpa=-2.919 degrees
! Estimated noise=3.6037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0150823 Jy
! Component: 100  -  total flux cleaned = -0.0199778 Jy
! Component: 150  -  total flux cleaned = -0.0209328 Jy
! Component: 200  -  total flux cleaned = -0.0217761 Jy
! Total flux subtracted in 200 components = -0.0217761 Jy
! Clean residual min=-0.041528 max=0.043279 Jy/beam
! Clean residual mean=0.000074 rms=0.014480 Jy/beam
! Combined flux in latest and established models = 1.47911 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 1.47911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184161Jy  sigma=1.399641
! Fit after  self-cal, rms=0.184148Jy  sigma=1.399617
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000999706 Jy
! Component: 100  -  total flux cleaned = -0.00167394 Jy
! Component: 150  -  total flux cleaned = -0.00209323 Jy
! Component: 200  -  total flux cleaned = -0.00286289 Jy
! Total flux subtracted in 200 components = -0.00286289 Jy
! Clean residual min=-0.041173 max=0.043822 Jy/beam
! Clean residual mean=0.000071 rms=0.014444 Jy/beam
! Combined flux in latest and established models = 1.47625 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 95 components and 1.47625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183815Jy  sigma=1.394089
! Fit after  self-cal, rms=0.183807Jy  sigma=1.394071
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183807Jy  sigma=1.394071
! Fit after  self-cal, rms=0.180345Jy  sigma=1.345387
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=17.26 mas, bpa=-2.271 degrees
! Estimated noise=4.26649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.851028 Jy
! Component: 100  -  total flux cleaned = 1.06516 Jy
! Component: 150  -  total flux cleaned = 1.16732 Jy
! Component: 200  -  total flux cleaned = 1.23713 Jy
! Total flux subtracted in 200 components = 1.23713 Jy
! Clean residual min=-0.043381 max=0.087737 Jy/beam
! Clean residual mean=-0.000129 rms=0.016811 Jy/beam
! Combined flux in latest and established models = 1.23713 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 1.23713 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=18.43 mas, bpa=-2.965 degrees
! Estimated noise=3.60982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, 27.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107329 Jy
! Component: 100  -  total flux cleaned = 0.165019 Jy
! Component: 150  -  total flux cleaned = 0.203719 Jy
! Component: 200  -  total flux cleaned = 0.22865 Jy
! Total flux subtracted in 200 components = 0.22865 Jy
! Clean residual min=-0.035180 max=0.041987 Jy/beam
! Clean residual mean=-0.000031 rms=0.011964 Jy/beam
! Combined flux in latest and established models = 1.46578 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 113 components and 1.46578 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.86 mas, bmaj=21.83 mas, bpa=-8.084 degrees
! Estimated noise=4.4657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116413 Jy
! Component: 100  -  total flux cleaned = 0.0135971 Jy
! Component: 150  -  total flux cleaned = 0.0144822 Jy
! Component: 200  -  total flux cleaned = 0.0153484 Jy
! Total flux subtracted in 200 components = 0.0153484 Jy
! Clean residual min=-0.047907 max=0.044722 Jy/beam
! Clean residual mean=0.000081 rms=0.014705 Jy/beam
! Combined flux in latest and established models = 1.48113 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158194 Jy
! Component: 100  -  total flux cleaned = 0.00304809 Jy
! Component: 150  -  total flux cleaned = 0.00374554 Jy
! Component: 200  -  total flux cleaned = 0.00507887 Jy
! Total flux subtracted in 200 components = 0.00507887 Jy
! Clean residual min=-0.043296 max=0.039711 Jy/beam
! Clean residual mean=0.000136 rms=0.013158 Jy/beam
! Combined flux in latest and established models = 1.48621 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 140 components and 1.48621 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=18.43 mas, bpa=-2.965 degrees
! Estimated noise=3.60982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354431 Jy
! Component: 100  -  total flux cleaned = 0.00533113 Jy
! Component: 150  -  total flux cleaned = 0.00628853 Jy
! Component: 200  -  total flux cleaned = 0.00670394 Jy
! Total flux subtracted in 200 components = 0.00670394 Jy
! Clean residual min=-0.025558 max=0.033491 Jy/beam
! Clean residual mean=0.000074 rms=0.008984 Jy/beam
! Combined flux in latest and established models = 1.49291 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 178 components and 1.49291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139961Jy  sigma=1.133547
! Fit after  self-cal, rms=0.136445Jy  sigma=1.099520
wmodel /J0922-3959_S_map.mod
! wmodel: Unable to open new model file: /J0922-3959_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0922-3959_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.841 x 18.43 at -2.965 degrees (North through East)
! Clean map  min=-0.044875  max=1.079 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0922-3959_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.07899 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00797886 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.21843 2.21843 4.43685 8.87371 17.7474 35.4948 70.9897
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0239 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.078 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  135.23 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0922-3959_S_dfm.log closed on Thu May 19 23:12:28 2016