! Started logfile: /scr/pima/bg219i_uvs/J0921+7136_X_dfm.log on Thu May 19 23:12:21 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0921+7136_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0921+7136_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.813228 visibilities/baseline/integration-bin.
! Found source: J0921+7136
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18444 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0921+7136_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.039862Jy  sigma=23.554023
! Fit after  self-cal, rms=0.736624Jy  sigma=16.479570
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6407 mas, bmaj=2.599 mas, bpa=83.85 degrees
! Estimated noise=0.519852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.198409 Jy
! Component: 100  -  total flux cleaned = 0.249249 Jy
! Total flux subtracted in 100 components = 0.249249 Jy
! Clean residual min=-0.010111 max=0.021808 Jy/beam
! Clean residual mean=-0.000020 rms=0.002341 Jy/beam
! Combined flux in latest and established models = 0.249249 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.249249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078572Jy  sigma=1.714234
! Fit after  self-cal, rms=0.078576Jy  sigma=1.713882
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237556 Jy
! Component: 100  -  total flux cleaned = 0.0362158 Jy
! Total flux subtracted in 100 components = 0.0362158 Jy
! Clean residual min=-0.006760 max=0.009671 Jy/beam
! Clean residual mean=-0.000013 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.285465 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.285465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069653Jy  sigma=1.479428
! Fit after  self-cal, rms=0.069641Jy  sigma=1.478699
! Inverting map 
! Added new window around map position (6, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00910925 Jy
! Component: 100  -  total flux cleaned = 0.0142318 Jy
! Total flux subtracted in 100 components = 0.0142318 Jy
! Clean residual min=-0.005919 max=0.007453 Jy/beam
! Clean residual mean=-0.000010 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.299697 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.299697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068281Jy  sigma=1.449617
! Fit after  self-cal, rms=0.068225Jy  sigma=1.448080
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8524 mas, bmaj=2.915 mas, bpa=83.72 degrees
! Estimated noise=0.242475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0044317 Jy
! Component: 100  -  total flux cleaned = 0.00502871 Jy
! Component: 150  -  total flux cleaned = 0.00528427 Jy
! Component: 200  -  total flux cleaned = 0.0055004 Jy
! Total flux subtracted in 200 components = 0.0055004 Jy
! Clean residual min=-0.004784 max=0.005903 Jy/beam
! Clean residual mean=-0.000013 rms=0.001238 Jy/beam
! Combined flux in latest and established models = 0.305197 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 39 components and 0.305198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067602Jy  sigma=1.435108
! Fit after  self-cal, rms=0.067599Jy  sigma=1.434938
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8524 x 2.915 at 83.72 degrees (North through East)
! Clean map  min=-0.0045629  max=0.26499 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.94     KP        1.00     
!   LA        0.99     MK        1.03     NL        0.99     OV        0.97     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.96     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.96     KP        0.99     
!   LA        1.00     MK        1.00     NL        0.98     OV        0.98     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     MK        0.99     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.10     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.04     SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.96     KP        1.00     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.96     KP        1.00     
!   LA        1.03     MK        0.98     NL        0.97     OV        0.97     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.96     KP        0.99     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.03     KP        0.97     
!   LA        1.01     MK        0.99     NL        0.96     OV        0.99     
!   PT        1.02     SC        1.08     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.96     KP        0.99     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.02     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.067599Jy  sigma=1.434938
! Fit after  self-cal, rms=0.067442Jy  sigma=1.418131
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8616 mas, bmaj=2.911 mas, bpa=83.9 degrees
! Estimated noise=0.241456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.2, -12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00643844 Jy
! Component: 100  -  total flux cleaned = 0.0105137 Jy
! Component: 150  -  total flux cleaned = 0.0135719 Jy
! Component: 200  -  total flux cleaned = 0.0157897 Jy
! Total flux subtracted in 200 components = 0.0157897 Jy
! Clean residual min=-0.003775 max=0.004497 Jy/beam
! Clean residual mean=-0.000006 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.320987 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 82 components and 0.320987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066677Jy  sigma=1.400720
! Fit after  self-cal, rms=0.066683Jy  sigma=1.400234
! Inverting map 
! Added new window around map position (1, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241647 Jy
! Component: 100  -  total flux cleaned = 0.00339358 Jy
! Component: 150  -  total flux cleaned = 0.00415077 Jy
! Component: 200  -  total flux cleaned = 0.00457122 Jy
! Total flux subtracted in 200 components = 0.00457122 Jy
! Clean residual min=-0.003365 max=0.004029 Jy/beam
! Clean residual mean=-0.000004 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.325558 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 106 components and 0.325558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066281Jy  sigma=1.392901
! Fit after  self-cal, rms=0.066267Jy  sigma=1.392577
! Inverting map 
! Added new window around map position (47.2, 8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342171 Jy
! Component: 100  -  total flux cleaned = 0.00414257 Jy
! Component: 150  -  total flux cleaned = 0.00495504 Jy
! Component: 200  -  total flux cleaned = 0.0055596 Jy
! Total flux subtracted in 200 components = 0.0055596 Jy
! Clean residual min=-0.003204 max=0.003372 Jy/beam
! Clean residual mean=-0.000003 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.331118 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 133 components and 0.331118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065958Jy  sigma=1.387307
! Fit after  self-cal, rms=0.065948Jy  sigma=1.386998
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065948Jy  sigma=1.386998
! Fit after  self-cal, rms=0.065822Jy  sigma=1.369576
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8574 mas, bmaj=2.903 mas, bpa=83.82 degrees
! Estimated noise=0.241056 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113179 Jy
! Component: 100  -  total flux cleaned = 0.00156584 Jy
! Component: 150  -  total flux cleaned = 0.00195342 Jy
! Component: 200  -  total flux cleaned = 0.00235266 Jy
! Total flux subtracted in 200 components = 0.00235266 Jy
! Clean residual min=-0.002666 max=0.002251 Jy/beam
! Clean residual mean=-0.000000 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.333471 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 167 components and 0.333471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065715Jy  sigma=1.367285
! Fit after  self-cal, rms=0.065727Jy  sigma=1.367198
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00022202 Jy
! Component: 100  -  total flux cleaned = 0.000566022 Jy
! Component: 150  -  total flux cleaned = 0.00080508 Jy
! Component: 200  -  total flux cleaned = 0.00106461 Jy
! Total flux subtracted in 200 components = 0.00106461 Jy
! Clean residual min=-0.002554 max=0.002210 Jy/beam
! Clean residual mean=0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.334535 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 182 components and 0.334535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065674Jy  sigma=1.366200
! Fit after  self-cal, rms=0.065673Jy  sigma=1.366174
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065673Jy  sigma=1.366174
! Fit after  self-cal, rms=0.065688Jy  sigma=1.365960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8574 mas, bmaj=2.904 mas, bpa=83.82 degrees
! Estimated noise=0.240637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163084 Jy
! Component: 100  -  total flux cleaned = -5.05801e-05 Jy
! Component: 150  -  total flux cleaned = 0.000228149 Jy
! Component: 200  -  total flux cleaned = 0.00042242 Jy
! Total flux subtracted in 200 components = 0.00042242 Jy
! Clean residual min=-0.002343 max=0.002210 Jy/beam
! Clean residual mean=0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.334958 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 189 components and 0.334958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065647Jy  sigma=1.365165
! Fit after  self-cal, rms=0.065647Jy  sigma=1.365147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.56956e-05 Jy
! Component: 100  -  total flux cleaned = 0.000323112 Jy
! Component: 150  -  total flux cleaned = 0.000517258 Jy
! Component: 200  -  total flux cleaned = 0.00064854 Jy
! Total flux subtracted in 200 components = 0.00064854 Jy
! Clean residual min=-0.002262 max=0.002181 Jy/beam
! Clean residual mean=0.000001 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.335606 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 201 components and 0.335606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065622Jy  sigma=1.364685
! Fit after  self-cal, rms=0.065621Jy  sigma=1.364672
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065621Jy  sigma=1.364672
! Fit after  self-cal, rms=0.065637Jy  sigma=1.364614
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=3.727 mas, bpa=80.36 degrees
! Estimated noise=0.29965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116747 Jy
! Component: 100  -  total flux cleaned = 0.00144258 Jy
! Component: 150  -  total flux cleaned = 0.00162681 Jy
! Component: 200  -  total flux cleaned = 0.00158398 Jy
! Total flux subtracted in 200 components = 0.00158398 Jy
! Clean residual min=-0.002141 max=0.002102 Jy/beam
! Clean residual mean=0.000002 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.33719 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 220 components and 0.33719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065631Jy  sigma=1.364494
! Fit after  self-cal, rms=0.065631Jy  sigma=1.364464
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017781 Jy
! Component: 100  -  total flux cleaned = 0.000214141 Jy
! Component: 150  -  total flux cleaned = 0.000214229 Jy
! Component: 200  -  total flux cleaned = 0.00022931 Jy
! Total flux subtracted in 200 components = 0.00022931 Jy
! Clean residual min=-0.002106 max=0.002069 Jy/beam
! Clean residual mean=0.000002 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.33742 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 233 components and 0.33742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065630Jy  sigma=1.364509
! Fit after  self-cal, rms=0.065629Jy  sigma=1.364508
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8577 mas, bmaj=2.904 mas, bpa=83.82 degrees
! Estimated noise=0.240436 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8577 x 2.904 at 83.82 degrees (North through East)
! Clean map  min=-0.0019441  max=0.26306 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6436 mas, bmaj=2.59 mas, bpa=83.86 degrees
! Estimated noise=0.517227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.197267 Jy
! Component: 100  -  total flux cleaned = 0.247218 Jy
! Component: 150  -  total flux cleaned = 0.27 Jy
! Component: 200  -  total flux cleaned = 0.281802 Jy
! Total flux subtracted in 200 components = 0.281802 Jy
! Clean residual min=-0.005141 max=0.006035 Jy/beam
! Clean residual mean=-0.000012 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.281802 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.281802 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8577 mas, bmaj=2.904 mas, bpa=83.82 degrees
! Estimated noise=0.240436 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00973005 Jy
! Component: 100  -  total flux cleaned = 0.0162375 Jy
! Component: 150  -  total flux cleaned = 0.0215293 Jy
! Component: 200  -  total flux cleaned = 0.0259904 Jy
! Total flux subtracted in 200 components = 0.0259904 Jy
! Clean residual min=-0.003035 max=0.003176 Jy/beam
! Clean residual mean=-0.000008 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.307793 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 57 components and 0.307793 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=3.727 mas, bpa=80.36 degrees
! Estimated noise=0.29965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00635552 Jy
! Component: 100  -  total flux cleaned = 0.0109476 Jy
! Component: 150  -  total flux cleaned = 0.0144584 Jy
! Component: 200  -  total flux cleaned = 0.0172238 Jy
! Total flux subtracted in 200 components = 0.0172238 Jy
! Clean residual min=-0.002721 max=0.002604 Jy/beam
! Clean residual mean=-0.000004 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.325017 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223215 Jy
! Component: 100  -  total flux cleaned = 0.00409525 Jy
! Component: 150  -  total flux cleaned = 0.00567082 Jy
! Component: 200  -  total flux cleaned = 0.00701021 Jy
! Total flux subtracted in 200 components = 0.00701021 Jy
! Clean residual min=-0.002356 max=0.002302 Jy/beam
! Clean residual mean=-0.000001 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.332027 Jy
! Adding 112 model components to the UV plane model.
! The established model now contains 153 components and 0.332027 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8577 mas, bmaj=2.904 mas, bpa=83.82 degrees
! Estimated noise=0.240436 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184696 Jy
! Component: 100  -  total flux cleaned = 0.00315826 Jy
! Component: 150  -  total flux cleaned = 0.00362447 Jy
! Component: 200  -  total flux cleaned = 0.00405098 Jy
! Total flux subtracted in 200 components = 0.00405098 Jy
! Clean residual min=-0.002011 max=0.002291 Jy/beam
! Clean residual mean=0.000000 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.336078 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 182 components and 0.336078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065810Jy  sigma=1.367160
! Fit after  self-cal, rms=0.065785Jy  sigma=1.366884
wmodel /J0921+7136_X_map.mod
! wmodel: Unable to open new model file: /J0921+7136_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0921+7136_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8577 x 2.904 at 83.82 degrees (North through East)
! Clean map  min=-0.0019085  max=0.26397 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0921+7136_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.26397 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000460627 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.523499 0.523499 1.047 2.094 4.18799 8.37599 16.752 33.5039 67.0079
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.263 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  573.066 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0921+7136_X_dfm.log closed on Thu May 19 23:12:24 2016