! Started logfile: /scr/pima/bg219i_uvs/J0912+2205_X_dfm.log on Thu May 19 23:12:05 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0912+2205_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0912+2205_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.671868 visibilities/baseline/integration-bin.
! Found source: J0912+2205
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17052 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0912+2205_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 71 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021045Jy  sigma=25.191618
! Fit after  self-cal, rms=0.818660Jy  sigma=20.133398
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7542 mas, bmaj=1.464 mas, bpa=2.489 degrees
! Estimated noise=0.379621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137455 Jy
! Component: 100  -  total flux cleaned = 0.168859 Jy
! Total flux subtracted in 100 components = 0.168859 Jy
! Clean residual min=-0.005484 max=0.011539 Jy/beam
! Clean residual mean=0.000010 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.168859 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.168859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065365Jy  sigma=1.538461
! Fit after  self-cal, rms=0.065351Jy  sigma=1.537928
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130587 Jy
! Component: 100  -  total flux cleaned = 0.0201841 Jy
! Total flux subtracted in 100 components = 0.0201841 Jy
! Clean residual min=-0.004239 max=0.007438 Jy/beam
! Clean residual mean=0.000005 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.189043 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.189043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061515Jy  sigma=1.431320
! Fit after  self-cal, rms=0.061509Jy  sigma=1.430694
! Inverting map 
! Added new window around map position (-2, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00721712 Jy
! Component: 100  -  total flux cleaned = 0.0117079 Jy
! Total flux subtracted in 100 components = 0.0117079 Jy
! Clean residual min=-0.003303 max=0.004511 Jy/beam
! Clean residual mean=0.000003 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.200751 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.200751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060302Jy  sigma=1.397936
! Fit after  self-cal, rms=0.060257Jy  sigma=1.396598
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9383 mas, bmaj=1.682 mas, bpa=2.18 degrees
! Estimated noise=0.225839 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621243 Jy
! Component: 100  -  total flux cleaned = 0.00983994 Jy
! Component: 150  -  total flux cleaned = 0.0121798 Jy
! Component: 200  -  total flux cleaned = 0.0136378 Jy
! Total flux subtracted in 200 components = 0.0136378 Jy
! Clean residual min=-0.002106 max=0.002369 Jy/beam
! Clean residual mean=-0.000000 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.214389 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 33 components and 0.214389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059591Jy  sigma=1.378537
! Fit after  self-cal, rms=0.059565Jy  sigma=1.377624
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9383 x 1.682 at 2.18 degrees (North through East)
! Clean map  min=-0.0020274  max=0.18315 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.01     MK        1.04     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.98     KP        1.01     
!   LA        0.98     MK        1.03     NL        1.02     OV        0.97     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.00     KP        1.01     
!   LA        0.98     MK        0.97     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        1.00     
!   LA        0.98     MK        1.04     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.03     KP        1.03     
!   LA        1.00     MK        0.99     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.96     KP        1.01     
!   LA        1.03     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        0.99     
!   LA        0.98     MK        1.03     NL        0.98     OV        0.98     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.97     KP        0.96     
!   LA        0.97     MK        1.00     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059565Jy  sigma=1.377624
! Fit after  self-cal, rms=0.059268Jy  sigma=1.371029
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9447 mas, bmaj=1.692 mas, bpa=2.029 degrees
! Estimated noise=0.225006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000452153 Jy
! Component: 100  -  total flux cleaned = -0.000447367 Jy
! Component: 150  -  total flux cleaned = -0.000446036 Jy
! Component: 200  -  total flux cleaned = -0.000411512 Jy
! Total flux subtracted in 200 components = -0.000411512 Jy
! Clean residual min=-0.001793 max=0.001468 Jy/beam
! Clean residual mean=0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.213977 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 47 components and 0.213977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059193Jy  sigma=1.369447
! Fit after  self-cal, rms=0.059198Jy  sigma=1.369296
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059198Jy  sigma=1.369296
! Fit after  self-cal, rms=0.059327Jy  sigma=1.364772
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9449 mas, bmaj=1.686 mas, bpa=2.378 degrees
! Estimated noise=0.224559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000386132 Jy
! Component: 100  -  total flux cleaned = 0.000364238 Jy
! Component: 150  -  total flux cleaned = 0.000306004 Jy
! Component: 200  -  total flux cleaned = 0.000305445 Jy
! Total flux subtracted in 200 components = 0.000305445 Jy
! Clean residual min=-0.001226 max=0.001433 Jy/beam
! Clean residual mean=0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.214283 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.214283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059312Jy  sigma=1.364355
! Fit after  self-cal, rms=0.059322Jy  sigma=1.364313
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.8, 39.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120739 Jy
! Component: 100  -  total flux cleaned = 0.00156577 Jy
! Component: 150  -  total flux cleaned = 0.00171197 Jy
! Component: 200  -  total flux cleaned = 0.00177673 Jy
! Total flux subtracted in 200 components = 0.00177673 Jy
! Clean residual min=-0.001184 max=0.001251 Jy/beam
! Clean residual mean=0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.21606 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.21606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059296Jy  sigma=1.363634
! Fit after  self-cal, rms=0.059294Jy  sigma=1.363592
! Inverting map 
! Added new window around map position (-48.2, -33.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404695 Jy
! Component: 100  -  total flux cleaned = 0.000336441 Jy
! Component: 150  -  total flux cleaned = 0.000387213 Jy
! Component: 200  -  total flux cleaned = 0.000388464 Jy
! Total flux subtracted in 200 components = 0.000388464 Jy
! Clean residual min=-0.001149 max=0.001249 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.216448 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 0.216448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059258Jy  sigma=1.362838
! Fit after  self-cal, rms=0.059258Jy  sigma=1.362793
! Inverting map 
! Added new window around map position (39.4, 17.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000702334 Jy
! Component: 100  -  total flux cleaned = 0.000789776 Jy
! Component: 150  -  total flux cleaned = 0.000742667 Jy
! Component: 200  -  total flux cleaned = 0.000741913 Jy
! Total flux subtracted in 200 components = 0.000741913 Jy
! Clean residual min=-0.001098 max=0.001045 Jy/beam
! Clean residual mean=0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.21719 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 109 components and 0.21719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059229Jy  sigma=1.362080
! Fit after  self-cal, rms=0.059229Jy  sigma=1.362047
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059229Jy  sigma=1.362047
! Fit after  self-cal, rms=0.059341Jy  sigma=1.361273
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9455 mas, bmaj=1.685 mas, bpa=2.381 degrees
! Estimated noise=0.224576 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202362 Jy
! Component: 100  -  total flux cleaned = 0.000224176 Jy
! Component: 150  -  total flux cleaned = 0.000224676 Jy
! Component: 200  -  total flux cleaned = 0.000224519 Jy
! Total flux subtracted in 200 components = 0.000224519 Jy
! Clean residual min=-0.001111 max=0.001007 Jy/beam
! Clean residual mean=0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.217414 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 121 components and 0.217415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059327Jy  sigma=1.360979
! Fit after  self-cal, rms=0.059331Jy  sigma=1.360965
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.47027e-07 Jy
! Component: 100  -  total flux cleaned = -1.35806e-08 Jy
! Component: 150  -  total flux cleaned = -3.2872e-05 Jy
! Component: 200  -  total flux cleaned = -3.29416e-05 Jy
! Total flux subtracted in 200 components = -3.29416e-05 Jy
! Clean residual min=-0.001102 max=0.000988 Jy/beam
! Clean residual mean=0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.217382 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 127 components and 0.217382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059321Jy  sigma=1.360781
! Fit after  self-cal, rms=0.059321Jy  sigma=1.360779
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059321Jy  sigma=1.360779
! Fit after  self-cal, rms=0.059348Jy  sigma=1.360754
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.035 mas, bmaj=2.701 mas, bpa=2.073 degrees
! Estimated noise=0.283254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000433487 Jy
! Component: 100  -  total flux cleaned = 0.000509311 Jy
! Component: 150  -  total flux cleaned = 0.000536809 Jy
! Component: 200  -  total flux cleaned = 0.00050353 Jy
! Total flux subtracted in 200 components = 0.00050353 Jy
! Clean residual min=-0.001086 max=0.001038 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.217885 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 140 components and 0.217885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059347Jy  sigma=1.360694
! Fit after  self-cal, rms=0.059348Jy  sigma=1.360677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.91006e-05 Jy
! Component: 100  -  total flux cleaned = -2.44405e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010959 Jy
! Component: 200  -  total flux cleaned = -0.000180626 Jy
! Total flux subtracted in 200 components = -0.000180626 Jy
! Clean residual min=-0.001059 max=0.001048 Jy/beam
! Clean residual mean=0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.217705 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 152 components and 0.217705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059347Jy  sigma=1.360665
! Fit after  self-cal, rms=0.059347Jy  sigma=1.360659
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=1.685 mas, bpa=2.385 degrees
! Estimated noise=0.224614 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9457 x 1.685 at 2.385 degrees (North through East)
! Clean map  min=-0.001315  max=0.182 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7598 mas, bmaj=1.467 mas, bpa=2.859 degrees
! Estimated noise=0.38005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13743 Jy
! Component: 100  -  total flux cleaned = 0.169208 Jy
! Component: 150  -  total flux cleaned = 0.181378 Jy
! Component: 200  -  total flux cleaned = 0.189328 Jy
! Total flux subtracted in 200 components = 0.189328 Jy
! Clean residual min=-0.003645 max=0.004420 Jy/beam
! Clean residual mean=0.000005 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.189328 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.189328 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=1.685 mas, bpa=2.385 degrees
! Estimated noise=0.224614 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00928204 Jy
! Component: 100  -  total flux cleaned = 0.0147462 Jy
! Component: 150  -  total flux cleaned = 0.0181216 Jy
! Component: 200  -  total flux cleaned = 0.0204974 Jy
! Total flux subtracted in 200 components = 0.0204974 Jy
! Clean residual min=-0.001559 max=0.001623 Jy/beam
! Clean residual mean=0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.209825 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 24 components and 0.209825 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.035 mas, bmaj=2.701 mas, bpa=2.073 degrees
! Estimated noise=0.283254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298029 Jy
! Component: 100  -  total flux cleaned = 0.00440689 Jy
! Component: 150  -  total flux cleaned = 0.00541692 Jy
! Component: 200  -  total flux cleaned = 0.00599766 Jy
! Total flux subtracted in 200 components = 0.00599766 Jy
! Clean residual min=-0.001273 max=0.001190 Jy/beam
! Clean residual mean=0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.215823 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410001 Jy
! Component: 100  -  total flux cleaned = 0.000755874 Jy
! Component: 150  -  total flux cleaned = 0.00107258 Jy
! Component: 200  -  total flux cleaned = 0.00128091 Jy
! Total flux subtracted in 200 components = 0.00128091 Jy
! Clean residual min=-0.001058 max=0.001133 Jy/beam
! Clean residual mean=0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.217104 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 73 components and 0.217104 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=1.685 mas, bpa=2.385 degrees
! Estimated noise=0.224614 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411583 Jy
! Component: 100  -  total flux cleaned = 0.000290127 Jy
! Component: 150  -  total flux cleaned = 0.000182272 Jy
! Component: 200  -  total flux cleaned = 4.85074e-05 Jy
! Total flux subtracted in 200 components = 4.85074e-05 Jy
! Clean residual min=-0.001224 max=0.001113 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.217152 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.217152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059402Jy  sigma=1.362013
! Fit after  self-cal, rms=0.059388Jy  sigma=1.361854
wmodel /J0912+2205_X_map.mod
! wmodel: Unable to open new model file: /J0912+2205_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0912+2205_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9457 x 1.685 at 2.385 degrees (North through East)
! Clean map  min=-0.001135  max=0.18213 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0912+2205_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.182132 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000266014 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.438166 0.438166 0.876332 1.75266 3.50533 7.01065 14.0213 28.0426 56.0852
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.182 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  684.672 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0912+2205_X_dfm.log closed on Thu May 19 23:12:08 2016