! Started logfile: /scr/pima/bg219i_uvs/J0854+2006_X_uvs.log on Wed Apr 6 23:37:51 2016 obs /scr/pima/bg219i_uvs/J0854+2006_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J0854+2006_X_uva.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835088 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8568 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0854+2006_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=4.486559Jy sigma=44.452433 ! Fit after self-cal, rms=3.376600Jy sigma=33.270157 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6855 mas, bmaj=1.77 mas, bpa=1.683 degrees ! Estimated noise=2.16715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21855 Jy ! Component: 100 - total flux cleaned = 3.94016 Jy ! Total flux subtracted in 100 components = 3.94016 Jy ! Clean residual min=-0.116626 max=0.258895 Jy/beam ! Clean residual mean=-0.000037 rms=0.032006 Jy/beam ! Combined flux in latest and established models = 3.94016 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 3.94016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.684021Jy sigma=6.746825 ! Fit after self-cal, rms=0.683436Jy sigma=6.745248 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.291087 Jy ! Component: 100 - total flux cleaned = 0.454193 Jy ! Total flux subtracted in 100 components = 0.454193 Jy ! Clean residual min=-0.078259 max=0.170494 Jy/beam ! Clean residual mean=-0.000023 rms=0.022046 Jy/beam ! Combined flux in latest and established models = 4.39436 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 4.39436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.452290Jy sigma=4.367349 ! Fit after self-cal, rms=0.449516Jy sigma=4.351881 ! Inverting map ! Added new window around map position (-1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155914 Jy ! Component: 100 - total flux cleaned = 0.245352 Jy ! Total flux subtracted in 100 components = 0.245352 Jy ! Clean residual min=-0.070988 max=0.107371 Jy/beam ! Clean residual mean=-0.000013 rms=0.017867 Jy/beam ! Combined flux in latest and established models = 4.63971 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 4.63971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.358426Jy sigma=3.485703 ! Fit after self-cal, rms=0.349068Jy sigma=3.420506 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8585 mas, bmaj=2.022 mas, bpa=-0.4828 degrees ! Estimated noise=1.45124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103846 Jy ! Component: 100 - total flux cleaned = 0.161904 Jy ! Component: 150 - total flux cleaned = 0.19248 Jy ! Component: 200 - total flux cleaned = 0.205057 Jy ! Total flux subtracted in 200 components = 0.205057 Jy ! Clean residual min=-0.060452 max=0.115306 Jy/beam ! Clean residual mean=0.000002 rms=0.019825 Jy/beam ! Combined flux in latest and established models = 4.84477 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 4.84477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.315422Jy sigma=2.997316 ! Fit after self-cal, rms=0.312792Jy sigma=2.975611 ! Inverting map ! Added new window around map position (-4.6, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0941953 Jy ! Component: 100 - total flux cleaned = 0.122816 Jy ! Component: 150 - total flux cleaned = 0.139471 Jy ! Component: 200 - total flux cleaned = 0.14962 Jy ! Total flux subtracted in 200 components = 0.14962 Jy ! Clean residual min=-0.058227 max=0.099573 Jy/beam ! Clean residual mean=-0.000017 rms=0.017269 Jy/beam ! Combined flux in latest and established models = 4.99439 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 4.99439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.286245Jy sigma=2.622649 ! Fit after self-cal, rms=0.283266Jy sigma=2.561040 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8585 x 2.022 at -0.4828 degrees (North through East) ! Clean map min=-0.05119 max=4.2412 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 0.97 ! LA 1.00 MK 1.00 NL 1.00 OV 0.98 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.98 ! LA 0.98 MK 1.02 NL 1.01 OV 0.98 ! PT 1.13 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 0.98 ! LA 0.97 MK 1.03 NL 1.02 OV 0.95 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.98 ! LA 0.95 MK 1.03 NL 1.01 OV 0.96 ! PT 1.03 SC 1.03 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 0.99 ! LA 0.99 MK 0.99 NL 1.02 OV 0.96 ! PT 1.08 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 0.97 ! LA 0.98 MK 1.02 NL 1.01 OV 0.97 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 0.99 ! LA 0.97 MK 1.01 NL 0.98 OV 0.97 ! PT 1.09 SC 1.01 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.283266Jy sigma=2.561040 ! Fit after self-cal, rms=0.264770Jy sigma=1.872018 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=2.025 mas, bpa=-0.426 degrees ! Estimated noise=1.45333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011134 Jy ! Component: 100 - total flux cleaned = 0.0136227 Jy ! Component: 150 - total flux cleaned = 0.0156991 Jy ! Component: 200 - total flux cleaned = 0.0174989 Jy ! Total flux subtracted in 200 components = 0.0174989 Jy ! Clean residual min=-0.045674 max=0.047971 Jy/beam ! Clean residual mean=-0.000049 rms=0.010761 Jy/beam ! Combined flux in latest and established models = 5.01189 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 5.01188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.261052Jy sigma=1.849072 ! Fit after self-cal, rms=0.260537Jy sigma=1.844130 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.260537Jy sigma=1.844130 ! Fit after self-cal, rms=0.172173Jy sigma=1.310841 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8612 mas, bmaj=2.023 mas, bpa=-0.4594 degrees ! Estimated noise=1.45507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0222387 Jy ! Component: 100 - total flux cleaned = -0.030357 Jy ! Component: 150 - total flux cleaned = -0.0373581 Jy ! Component: 200 - total flux cleaned = -0.0419945 Jy ! Total flux subtracted in 200 components = -0.0419945 Jy ! Clean residual min=-0.017839 max=0.027465 Jy/beam ! Clean residual mean=-0.000002 rms=0.004282 Jy/beam ! Combined flux in latest and established models = 4.96989 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 4.96989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.166071Jy sigma=1.284760 ! Fit after self-cal, rms=0.164370Jy sigma=1.276331 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232008 Jy ! Component: 100 - total flux cleaned = 0.0253705 Jy ! Component: 150 - total flux cleaned = 0.025067 Jy ! Component: 200 - total flux cleaned = 0.0232482 Jy ! Total flux subtracted in 200 components = 0.0232482 Jy ! Clean residual min=-0.016241 max=0.016497 Jy/beam ! Clean residual mean=0.000003 rms=0.003693 Jy/beam ! Combined flux in latest and established models = 4.99314 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 110 components and 4.99314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.158933Jy sigma=1.255571 ! Fit after self-cal, rms=0.158156Jy sigma=1.248356 ! Inverting map ! Added new window around map position (-2.2, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010447 Jy ! Component: 100 - total flux cleaned = 0.016054 Jy ! Component: 150 - total flux cleaned = 0.0192524 Jy ! Component: 200 - total flux cleaned = 0.0215305 Jy ! Total flux subtracted in 200 components = 0.0215305 Jy ! Clean residual min=-0.014467 max=0.014383 Jy/beam ! Clean residual mean=0.000002 rms=0.003349 Jy/beam ! Combined flux in latest and established models = 5.01467 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 139 components and 5.01467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.155251Jy sigma=1.237516 ! Fit after self-cal, rms=0.154669Jy sigma=1.234304 ! Inverting map ! Added new window around map position (4.6, -24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130316 Jy ! Component: 100 - total flux cleaned = 0.0172977 Jy ! Component: 150 - total flux cleaned = 0.0199049 Jy ! Component: 200 - total flux cleaned = 0.0212368 Jy ! Total flux subtracted in 200 components = 0.0212368 Jy ! Clean residual min=-0.013340 max=0.012140 Jy/beam ! Clean residual mean=-0.000001 rms=0.003076 Jy/beam ! Combined flux in latest and established models = 5.03591 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 157 components and 5.03591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.152849Jy sigma=1.220114 ! Fit after self-cal, rms=0.152175Jy sigma=1.217411 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.152175Jy sigma=1.217411 ! Fit after self-cal, rms=0.148306Jy sigma=1.193552 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.861 mas, bmaj=2.022 mas, bpa=-0.4565 degrees ! Estimated noise=1.45348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365781 Jy ! Component: 100 - total flux cleaned = -0.000149401 Jy ! Component: 150 - total flux cleaned = 0.000401282 Jy ! Component: 200 - total flux cleaned = 0.000400667 Jy ! Total flux subtracted in 200 components = 0.000400667 Jy ! Clean residual min=-0.012878 max=0.011408 Jy/beam ! Clean residual mean=-0.000003 rms=0.002683 Jy/beam ! Combined flux in latest and established models = 5.03631 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 5.03631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.145640Jy sigma=1.183625 ! Fit after self-cal, rms=0.145075Jy sigma=1.180434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241412 Jy ! Component: 100 - total flux cleaned = 0.00217024 Jy ! Component: 150 - total flux cleaned = 0.00346605 Jy ! Component: 200 - total flux cleaned = 0.00405617 Jy ! Total flux subtracted in 200 components = 0.00405617 Jy ! Clean residual min=-0.011705 max=0.010710 Jy/beam ! Clean residual mean=-0.000002 rms=0.002531 Jy/beam ! Combined flux in latest and established models = 5.04036 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 180 components and 5.04036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.144004Jy sigma=1.176530 ! Fit after self-cal, rms=0.143740Jy sigma=1.175375 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.143740Jy sigma=1.175375 ! Fit after self-cal, rms=0.142542Jy sigma=1.168966 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.017 mas, bmaj=2.857 mas, bpa=-6.264 degrees ! Estimated noise=1.97208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147068 Jy ! Component: 100 - total flux cleaned = -0.000835101 Jy ! Component: 150 - total flux cleaned = -0.00110304 Jy ! Component: 200 - total flux cleaned = -0.00254527 Jy ! Total flux subtracted in 200 components = -0.00254527 Jy ! Clean residual min=-0.012883 max=0.012010 Jy/beam ! Clean residual mean=-0.000007 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 5.03782 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 197 components and 5.03782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.141024Jy sigma=1.164506 ! Fit after self-cal, rms=0.140783Jy sigma=1.163112 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671988 Jy ! Component: 100 - total flux cleaned = 0.000269067 Jy ! Component: 150 - total flux cleaned = -0.000300919 Jy ! Component: 200 - total flux cleaned = -0.00118906 Jy ! Total flux subtracted in 200 components = -0.00118906 Jy ! Clean residual min=-0.011892 max=0.011458 Jy/beam ! Clean residual mean=-0.000005 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 5.03663 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 210 components and 5.03663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.140290Jy sigma=1.162443 ! Fit after self-cal, rms=0.140212Jy sigma=1.162067 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8609 mas, bmaj=2.021 mas, bpa=-0.4656 degrees ! Estimated noise=1.45231 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8609 x 2.021 at -0.4656 degrees (North through East) ! Clean map min=-0.017277 max=4.2444 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.140212Jy sigma=1.162067 ! Fit after self-cal, rms=0.096231Jy sigma=0.665500 ! Inverting map and beam ! Estimated beam: bmin=0.8613 mas, bmaj=2.021 mas, bpa=-0.4782 degrees ! Estimated noise=1.45114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242133 Jy ! Component: 100 - total flux cleaned = -0.00331957 Jy ! Component: 150 - total flux cleaned = -0.00309884 Jy ! Component: 200 - total flux cleaned = -0.0036352 Jy ! Total flux subtracted in 200 components = -0.0036352 Jy ! Clean residual min=-0.010288 max=0.008402 Jy/beam ! Clean residual mean=-0.000006 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 5.03299 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 225 components and 5.03299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094934Jy sigma=0.656781 ! Fit after self-cal, rms=0.094689Jy sigma=0.655434 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.47939e-05 Jy ! Component: 100 - total flux cleaned = 8.07193e-05 Jy ! Component: 150 - total flux cleaned = -6.46723e-05 Jy ! Component: 200 - total flux cleaned = -0.000209516 Jy ! Total flux subtracted in 200 components = -0.000209516 Jy ! Clean residual min=-0.009543 max=0.008370 Jy/beam ! Clean residual mean=-0.000005 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 5.03278 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 234 components and 5.03278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.094002Jy sigma=0.650794 ! Fit after self-cal, rms=0.093876Jy sigma=0.650094 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.093876Jy sigma=0.650094 ! Fit after self-cal, rms=0.093120Jy sigma=0.647218 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6878 mas, bmaj=1.769 mas, bpa=1.693 degrees ! Estimated noise=2.17298 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.22655 Jy ! Component: 100 - total flux cleaned = 3.94959 Jy ! Component: 150 - total flux cleaned = 4.25422 Jy ! Component: 200 - total flux cleaned = 4.4467 Jy ! Total flux subtracted in 200 components = 4.4467 Jy ! Clean residual min=-0.042166 max=0.101376 Jy/beam ! Clean residual mean=-0.000020 rms=0.012915 Jy/beam ! Combined flux in latest and established models = 4.4467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 4.4467 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=2.021 mas, bpa=-0.4828 degrees ! Estimated noise=1.4508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183318 Jy ! Component: 100 - total flux cleaned = 0.283776 Jy ! Component: 150 - total flux cleaned = 0.346354 Jy ! Component: 200 - total flux cleaned = 0.391083 Jy ! Total flux subtracted in 200 components = 0.391083 Jy ! Clean residual min=-0.022816 max=0.025878 Jy/beam ! Clean residual mean=-0.000002 rms=0.005854 Jy/beam ! Combined flux in latest and established models = 4.83778 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 43 components and 4.83778 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347384 Jy ! Component: 100 - total flux cleaned = 0.0624837 Jy ! Component: 150 - total flux cleaned = 0.0806643 Jy ! Component: 200 - total flux cleaned = 0.096007 Jy ! Total flux subtracted in 200 components = 0.096007 Jy ! Clean residual min=-0.015522 max=0.016757 Jy/beam ! Clean residual mean=0.000000 rms=0.003684 Jy/beam ! Combined flux in latest and established models = 4.93379 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 72 components and 4.93379 Jy ! Inverting map ! Added new window around map position (-0.2, 13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144128 Jy ! Component: 100 - total flux cleaned = 0.0253908 Jy ! Component: 150 - total flux cleaned = 0.035839 Jy ! Component: 200 - total flux cleaned = 0.042378 Jy ! Total flux subtracted in 200 components = 0.042378 Jy ! Clean residual min=-0.011901 max=0.012048 Jy/beam ! Clean residual mean=-0.000001 rms=0.002849 Jy/beam ! Combined flux in latest and established models = 4.97617 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 85 components and 4.97617 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.015 mas, bmaj=2.855 mas, bpa=-6.262 degrees ! Estimated noise=1.97082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151971 Jy ! Component: 100 - total flux cleaned = 0.0212783 Jy ! Component: 150 - total flux cleaned = 0.0248073 Jy ! Component: 200 - total flux cleaned = 0.0272079 Jy ! Total flux subtracted in 200 components = 0.0272079 Jy ! Clean residual min=-0.012837 max=0.012730 Jy/beam ! Clean residual mean=-0.000002 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 5.00338 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186853 Jy ! Component: 100 - total flux cleaned = 0.00326687 Jy ! Component: 150 - total flux cleaned = 0.00376826 Jy ! Component: 200 - total flux cleaned = 0.00423604 Jy ! Total flux subtracted in 200 components = 0.00423604 Jy ! Clean residual min=-0.011434 max=0.011142 Jy/beam ! Clean residual mean=-0.000004 rms=0.003094 Jy/beam ! Combined flux in latest and established models = 5.00761 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 144 components and 5.00761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8614 mas, bmaj=2.021 mas, bpa=-0.4828 degrees ! Estimated noise=1.4508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162152 Jy ! Component: 100 - total flux cleaned = 0.00295767 Jy ! Component: 150 - total flux cleaned = 0.00391777 Jy ! Component: 200 - total flux cleaned = 0.0045784 Jy ! Total flux subtracted in 200 components = 0.0045784 Jy ! Clean residual min=-0.008908 max=0.009355 Jy/beam ! Clean residual mean=-0.000003 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 5.01219 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 166 components and 5.01219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.092207Jy sigma=0.659780 ! Fit after self-cal, rms=0.091502Jy sigma=0.647679 wmodel /scr/pima/bg219i_uvs/J0854+2006_X_map.mod ! Writing 166 model components to file: /scr/pima/bg219i_uvs/J0854+2006_X_map.mod wobs /scr/pima/bg219i_uvs/J0854+2006_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J0854+2006_X_uvs.fits wwins /scr/pima/bg219i_uvs/J0854+2006_X_map.win ! wwins: Wrote 7 windows to /scr/pima/bg219i_uvs/J0854+2006_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213892 Jy ! Component: 100 - total flux cleaned = 0.00185517 Jy ! Component: 150 - total flux cleaned = 0.00145488 Jy ! Component: 200 - total flux cleaned = 0.000817741 Jy ! Component: 250 - total flux cleaned = 8.78117e-05 Jy ! Component: 300 - total flux cleaned = -0.000495249 Jy ! Component: 350 - total flux cleaned = -0.00127893 Jy ! Component: 400 - total flux cleaned = -0.00138657 Jy ! Component: 450 - total flux cleaned = -0.00180638 Jy ! Component: 500 - total flux cleaned = -0.0021151 Jy ! Component: 550 - total flux cleaned = -0.00261437 Jy ! Component: 600 - total flux cleaned = -0.00319525 Jy ! Component: 650 - total flux cleaned = -0.00300475 Jy ! Component: 700 - total flux cleaned = -0.0030971 Jy ! Component: 750 - total flux cleaned = -0.00300768 Jy ! Component: 800 - total flux cleaned = -0.00283021 Jy ! Component: 850 - total flux cleaned = -0.00265945 Jy ! Component: 900 - total flux cleaned = -0.00248957 Jy ! Component: 950 - total flux cleaned = -0.0023232 Jy ! Component: 1000 - total flux cleaned = -0.00215928 Jy ! Component: 1050 - total flux cleaned = -0.00192018 Jy ! Component: 1100 - total flux cleaned = -0.00184054 Jy ! Component: 1150 - total flux cleaned = -0.00152966 Jy ! Component: 1200 - total flux cleaned = -0.0013016 Jy ! Component: 1250 - total flux cleaned = -0.00130198 Jy ! Component: 1300 - total flux cleaned = -0.00122783 Jy ! Component: 1350 - total flux cleaned = -0.00101103 Jy ! Component: 1400 - total flux cleaned = -0.000727984 Jy ! Component: 1450 - total flux cleaned = -0.000449129 Jy ! Component: 1500 - total flux cleaned = -0.00024429 Jy ! Component: 1550 - total flux cleaned = -0.00011025 Jy ! Component: 1600 - total flux cleaned = 0.000285143 Jy ! Component: 1650 - total flux cleaned = 0.000217161 Jy ! Component: 1700 - total flux cleaned = 0.000475502 Jy ! Component: 1750 - total flux cleaned = 0.00066512 Jy ! Component: 1800 - total flux cleaned = 0.000915514 Jy ! Component: 1850 - total flux cleaned = 0.00122318 Jy ! Component: 1900 - total flux cleaned = 0.00152542 Jy ! Component: 1950 - total flux cleaned = 0.0018819 Jy ! Component: 2000 - total flux cleaned = 0.00217497 Jy ! Component: 2050 - total flux cleaned = 0.00246348 Jy ! Component: 2100 - total flux cleaned = 0.00274955 Jy ! Component: 2150 - total flux cleaned = 0.00331069 Jy ! Component: 2200 - total flux cleaned = 0.00347539 Jy ! Component: 2250 - total flux cleaned = 0.00396536 Jy ! Component: 2300 - total flux cleaned = 0.00428767 Jy ! Component: 2350 - total flux cleaned = 0.00439427 Jy ! Component: 2400 - total flux cleaned = 0.00439499 Jy ! Component: 2450 - total flux cleaned = 0.00486096 Jy ! Component: 2500 - total flux cleaned = 0.0051681 Jy ! Component: 2550 - total flux cleaned = 0.00557286 Jy ! Component: 2600 - total flux cleaned = 0.00587148 Jy ! Component: 2650 - total flux cleaned = 0.00631347 Jy ! Component: 2700 - total flux cleaned = 0.00650611 Jy ! Component: 2750 - total flux cleaned = 0.00669791 Jy ! Component: 2800 - total flux cleaned = 0.00688755 Jy ! Component: 2850 - total flux cleaned = 0.00707529 Jy ! Component: 2900 - total flux cleaned = 0.00726001 Jy ! Component: 2950 - total flux cleaned = 0.00744201 Jy ! Component: 3000 - total flux cleaned = 0.00753308 Jy ! Component: 3050 - total flux cleaned = 0.00771177 Jy ! Component: 3100 - total flux cleaned = 0.00806512 Jy ! Component: 3150 - total flux cleaned = 0.00819471 Jy ! Component: 3200 - total flux cleaned = 0.00823729 Jy ! Component: 3250 - total flux cleaned = 0.00840786 Jy ! Component: 3300 - total flux cleaned = 0.00870357 Jy ! Component: 3350 - total flux cleaned = 0.00870432 Jy ! Component: 3400 - total flux cleaned = 0.0088286 Jy ! Component: 3450 - total flux cleaned = 0.00895054 Jy ! Component: 3500 - total flux cleaned = 0.00891058 Jy ! Component: 3550 - total flux cleaned = 0.00903039 Jy ! Component: 3600 - total flux cleaned = 0.00918834 Jy ! Component: 3650 - total flux cleaned = 0.00907036 Jy ! Component: 3700 - total flux cleaned = 0.00914778 Jy ! Component: 3750 - total flux cleaned = 0.00914755 Jy ! Component: 3800 - total flux cleaned = 0.00914764 Jy ! Component: 3850 - total flux cleaned = 0.00926062 Jy ! Component: 3900 - total flux cleaned = 0.00937288 Jy ! Component: 3950 - total flux cleaned = 0.00944683 Jy ! Component: 4000 - total flux cleaned = 0.00963095 Jy ! Component: 4050 - total flux cleaned = 0.00977639 Jy ! Total flux subtracted in 4096 components = 0.00984801 Jy ! Clean residual min=-0.002022 max=0.001795 Jy/beam ! Clean residual mean=0.000000 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 5.02204 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 497 components and 5.02204 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J0854+2006_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8614 x 2.021 at -0.4828 degrees (North through East) ! Clean map min=-0.011382 max=4.2496 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0854+2006_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.24962 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000623834 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0440393 0.0440393 0.0880786 0.176157 0.352314 0.704628 1.40926 2.81851 5.63703 11.2741 22.5481 45.0962 90.1924 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.249 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6812.1 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J0854+2006_X_uvs.log closed on Wed Apr 6 23:37:57 2016