! Started logfile: /scr/pima/bg219i_uvs/J0849+5108_X_uvs.log on Wed Apr  6 23:37:46 2016
obs /scr/pima/bg219i_uvs/J0849+5108_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0849+5108_X_uva.fits
! AN table 1: 37 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.363363 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0849+5108
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 7260 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0849+5108_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.052003Jy  sigma=24.021780
! Fit after  self-cal, rms=0.667407Jy  sigma=15.179344
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7407 mas, bmaj=2.502 mas, bpa=46.88 degrees
! Estimated noise=0.897818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.258106 Jy
! Component: 100  -  total flux cleaned = 0.314558 Jy
! Total flux subtracted in 100 components = 0.314558 Jy
! Clean residual min=-0.007776 max=0.017425 Jy/beam
! Clean residual mean=0.000086 rms=0.002726 Jy/beam
! Combined flux in latest and established models = 0.314558 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.314558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063731Jy  sigma=1.441327
! Fit after  self-cal, rms=0.063728Jy  sigma=1.441222
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189967 Jy
! Component: 100  -  total flux cleaned = 0.0290547 Jy
! Total flux subtracted in 100 components = 0.0290547 Jy
! Clean residual min=-0.004947 max=0.006745 Jy/beam
! Clean residual mean=0.000034 rms=0.001453 Jy/beam
! Combined flux in latest and established models = 0.343612 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 16 components and 0.343612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.056815Jy  sigma=1.264061
! Fit after  self-cal, rms=0.056713Jy  sigma=1.262092
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8672 mas, bmaj=2.54 mas, bpa=47.7 degrees
! Estimated noise=0.543688 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890234 Jy
! Component: 100  -  total flux cleaned = 0.0138773 Jy
! Component: 150  -  total flux cleaned = 0.0170538 Jy
! Component: 200  -  total flux cleaned = 0.0193262 Jy
! Total flux subtracted in 200 components = 0.0193262 Jy
! Clean residual min=-0.004272 max=0.003911 Jy/beam
! Clean residual mean=0.000004 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.362939 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.362939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055313Jy  sigma=1.227676
! Fit after  self-cal, rms=0.055305Jy  sigma=1.227326
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8672 x 2.54 at 47.7 degrees (North through East)
! Clean map  min=-0.0041381  max=0.33451 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.03     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        0.99     
!   LA        1.01     MK        1.01     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.02     MK        1.03     NL        1.01     OV        0.95     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        1.00     
!   LA        1.03     MK        1.06     NL        1.01     OV        0.96     
!   PT        0.98     SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.01     
!   LA        1.02     MK        1.06     NL        0.99     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.01     
!   LA        1.01     MK        1.04     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.99     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.95     
!   PT        0.97     SC        1.00     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.055305Jy  sigma=1.227326
! Fit after  self-cal, rms=0.053691Jy  sigma=1.197877
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8825 mas, bmaj=2.545 mas, bpa=47.49 degrees
! Estimated noise=0.544304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000281703 Jy
! Component: 100  -  total flux cleaned = 0.000210048 Jy
! Component: 150  -  total flux cleaned = 0.000208768 Jy
! Component: 200  -  total flux cleaned = 0.000209703 Jy
! Total flux subtracted in 200 components = 0.000209703 Jy
! Clean residual min=-0.002578 max=0.003173 Jy/beam
! Clean residual mean=-0.000007 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.363148 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.363148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053645Jy  sigma=1.196756
! Fit after  self-cal, rms=0.053655Jy  sigma=1.196670
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053655Jy  sigma=1.196670
! Fit after  self-cal, rms=0.053650Jy  sigma=1.196627
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.546 mas, bpa=47.5 degrees
! Estimated noise=0.544199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.97371e-05 Jy
! Component: 100  -  total flux cleaned = 6.63799e-05 Jy
! Component: 150  -  total flux cleaned = 0.000108465 Jy
! Component: 200  -  total flux cleaned = 0.000147886 Jy
! Total flux subtracted in 200 components = 0.000147886 Jy
! Clean residual min=-0.002460 max=0.003050 Jy/beam
! Clean residual mean=-0.000007 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.363296 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.363296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053633Jy  sigma=1.196192
! Fit after  self-cal, rms=0.053632Jy  sigma=1.196174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, -24.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258295 Jy
! Component: 100  -  total flux cleaned = 0.003919 Jy
! Component: 150  -  total flux cleaned = 0.00478059 Jy
! Component: 200  -  total flux cleaned = 0.00520115 Jy
! Total flux subtracted in 200 components = 0.00520115 Jy
! Clean residual min=-0.002303 max=0.002385 Jy/beam
! Clean residual mean=-0.000005 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.368497 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 83 components and 0.368497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053511Jy  sigma=1.192827
! Fit after  self-cal, rms=0.053504Jy  sigma=1.192681
! Inverting map 
! Added new window around map position (-20.8, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179142 Jy
! Component: 100  -  total flux cleaned = 0.00246387 Jy
! Component: 150  -  total flux cleaned = 0.00308519 Jy
! Component: 200  -  total flux cleaned = 0.00352579 Jy
! Total flux subtracted in 200 components = 0.00352579 Jy
! Clean residual min=-0.002104 max=0.002163 Jy/beam
! Clean residual mean=-0.000001 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.372023 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 109 components and 0.372023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053392Jy  sigma=1.190396
! Fit after  self-cal, rms=0.053390Jy  sigma=1.190327
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053390Jy  sigma=1.190327
! Fit after  self-cal, rms=0.053336Jy  sigma=1.190123
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.547 mas, bpa=47.5 degrees
! Estimated noise=0.54348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000608731 Jy
! Component: 100  -  total flux cleaned = 0.00113541 Jy
! Component: 150  -  total flux cleaned = 0.00157447 Jy
! Component: 200  -  total flux cleaned = 0.00188777 Jy
! Total flux subtracted in 200 components = 0.00188777 Jy
! Clean residual min=-0.002066 max=0.002097 Jy/beam
! Clean residual mean=-0.000003 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.373911 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.373911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053299Jy  sigma=1.189290
! Fit after  self-cal, rms=0.053300Jy  sigma=1.189270
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.8, 32.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000544004 Jy
! Component: 100  -  total flux cleaned = 0.000898479 Jy
! Component: 150  -  total flux cleaned = 0.00113416 Jy
! Component: 200  -  total flux cleaned = 0.00129411 Jy
! Total flux subtracted in 200 components = 0.00129411 Jy
! Clean residual min=-0.002013 max=0.001731 Jy/beam
! Clean residual mean=-0.000003 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.375205 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 143 components and 0.375205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053174Jy  sigma=1.186822
! Fit after  self-cal, rms=0.053170Jy  sigma=1.186751
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053170Jy  sigma=1.186751
! Fit after  self-cal, rms=0.053159Jy  sigma=1.186691
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=2.832 mas, bpa=39.48 degrees
! Estimated noise=0.656346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000864813 Jy
! Component: 100  -  total flux cleaned = 0.00111733 Jy
! Component: 150  -  total flux cleaned = 0.00122852 Jy
! Component: 200  -  total flux cleaned = 0.00133213 Jy
! Total flux subtracted in 200 components = 0.00133213 Jy
! Clean residual min=-0.001777 max=0.001876 Jy/beam
! Clean residual mean=-0.000009 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.376537 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 159 components and 0.376537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053148Jy  sigma=1.186440
! Fit after  self-cal, rms=0.053147Jy  sigma=1.186416
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48.8, -39.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163436 Jy
! Component: 100  -  total flux cleaned = 0.00257006 Jy
! Component: 150  -  total flux cleaned = 0.00323787 Jy
! Component: 200  -  total flux cleaned = 0.00383984 Jy
! Total flux subtracted in 200 components = 0.00383984 Jy
! Clean residual min=-0.001669 max=0.001236 Jy/beam
! Clean residual mean=-0.000004 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.380377 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 202 components and 0.380377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053104Jy  sigma=1.185376
! Fit after  self-cal, rms=0.053101Jy  sigma=1.185344
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.548 mas, bpa=47.49 degrees
! Estimated noise=0.543296 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.882 x 2.548 at 47.49 degrees (North through East)
! Clean map  min=-0.0016245  max=0.33386 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7504 mas, bmaj=2.501 mas, bpa=46.85 degrees
! Estimated noise=0.839382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.257006 Jy
! Component: 100  -  total flux cleaned = 0.313301 Jy
! Component: 150  -  total flux cleaned = 0.332706 Jy
! Component: 200  -  total flux cleaned = 0.342857 Jy
! Total flux subtracted in 200 components = 0.342857 Jy
! Clean residual min=-0.005159 max=0.005344 Jy/beam
! Clean residual mean=0.000029 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.342856 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.342856 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.548 mas, bpa=47.49 degrees
! Estimated noise=0.543296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782 Jy
! Component: 100  -  total flux cleaned = 0.012215 Jy
! Component: 150  -  total flux cleaned = 0.0150054 Jy
! Component: 200  -  total flux cleaned = 0.0167665 Jy
! Total flux subtracted in 200 components = 0.0167665 Jy
! Clean residual min=-0.002856 max=0.002932 Jy/beam
! Clean residual mean=0.000016 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.359623 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 41 components and 0.359623 Jy
! Inverting map 
! Added new window around map position (44.4, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267652 Jy
! Component: 100  -  total flux cleaned = 0.00453103 Jy
! Component: 150  -  total flux cleaned = 0.00597492 Jy
! Component: 200  -  total flux cleaned = 0.0072313 Jy
! Total flux subtracted in 200 components = 0.0072313 Jy
! Clean residual min=-0.002371 max=0.002027 Jy/beam
! Clean residual mean=0.000008 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.366854 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 67 components and 0.366854 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=2.832 mas, bpa=39.48 degrees
! Estimated noise=0.656346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211049 Jy
! Component: 100  -  total flux cleaned = 0.00360261 Jy
! Component: 150  -  total flux cleaned = 0.00488858 Jy
! Component: 200  -  total flux cleaned = 0.00604943 Jy
! Total flux subtracted in 200 components = 0.00604943 Jy
! Clean residual min=-0.002108 max=0.001500 Jy/beam
! Clean residual mean=0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.372904 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107159 Jy
! Component: 100  -  total flux cleaned = 0.0020348 Jy
! Component: 150  -  total flux cleaned = 0.00286732 Jy
! Component: 200  -  total flux cleaned = 0.0036926 Jy
! Total flux subtracted in 200 components = 0.0036926 Jy
! Clean residual min=-0.001842 max=0.001308 Jy/beam
! Clean residual mean=-0.000003 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.376596 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 127 components and 0.376596 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.548 mas, bpa=47.49 degrees
! Estimated noise=0.543296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000737258 Jy
! Component: 100  -  total flux cleaned = 0.00114973 Jy
! Component: 150  -  total flux cleaned = 0.0016159 Jy
! Component: 200  -  total flux cleaned = 0.00200188 Jy
! Total flux subtracted in 200 components = 0.00200188 Jy
! Clean residual min=-0.002003 max=0.001455 Jy/beam
! Clean residual mean=0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.378598 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 151 components and 0.378598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.053117Jy  sigma=1.185583
! Fit after  self-cal, rms=0.053105Jy  sigma=1.185367
wmodel /scr/pima/bg219i_uvs/J0849+5108_X_map.mod
! Writing 151 model components to file: /scr/pima/bg219i_uvs/J0849+5108_X_map.mod
wobs /scr/pima/bg219i_uvs/J0849+5108_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0849+5108_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J0849+5108_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219i_uvs/J0849+5108_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000826903 Jy
! Component: 100  -  total flux cleaned = -0.00140071 Jy
! Component: 150  -  total flux cleaned = -0.001611 Jy
! Component: 200  -  total flux cleaned = -0.00171068 Jy
! Component: 250  -  total flux cleaned = -0.00173456 Jy
! Component: 300  -  total flux cleaned = -0.00184869 Jy
! Component: 350  -  total flux cleaned = -0.00193698 Jy
! Component: 400  -  total flux cleaned = -0.00200131 Jy
! Component: 450  -  total flux cleaned = -0.00204331 Jy
! Component: 500  -  total flux cleaned = -0.00208412 Jy
! Component: 550  -  total flux cleaned = -0.00212414 Jy
! Component: 600  -  total flux cleaned = -0.0022009 Jy
! Component: 650  -  total flux cleaned = -0.00225708 Jy
! Component: 700  -  total flux cleaned = -0.00229372 Jy
! Component: 750  -  total flux cleaned = -0.00231187 Jy
! Component: 800  -  total flux cleaned = -0.00231212 Jy
! Component: 850  -  total flux cleaned = -0.00226026 Jy
! Component: 900  -  total flux cleaned = -0.00226059 Jy
! Component: 950  -  total flux cleaned = -0.00221007 Jy
! Component: 1000  -  total flux cleaned = -0.00217659 Jy
! Component: 1050  -  total flux cleaned = -0.00212743 Jy
! Component: 1100  -  total flux cleaned = -0.00207893 Jy
! Component: 1150  -  total flux cleaned = -0.00203132 Jy
! Component: 1200  -  total flux cleaned = -0.00196887 Jy
! Component: 1250  -  total flux cleaned = -0.00192297 Jy
! Component: 1300  -  total flux cleaned = -0.00192291 Jy
! Component: 1350  -  total flux cleaned = -0.00186285 Jy
! Component: 1400  -  total flux cleaned = -0.00184813 Jy
! Component: 1450  -  total flux cleaned = -0.00184793 Jy
! Component: 1500  -  total flux cleaned = -0.00183336 Jy
! Component: 1550  -  total flux cleaned = -0.00184755 Jy
! Component: 1600  -  total flux cleaned = -0.00183325 Jy
! Component: 1650  -  total flux cleaned = -0.00180541 Jy
! Component: 1700  -  total flux cleaned = -0.00179171 Jy
! Component: 1750  -  total flux cleaned = -0.00177785 Jy
! Component: 1800  -  total flux cleaned = -0.00172343 Jy
! Component: 1850  -  total flux cleaned = -0.00176379 Jy
! Component: 1900  -  total flux cleaned = -0.00168367 Jy
! Component: 1950  -  total flux cleaned = -0.00167043 Jy
! Component: 2000  -  total flux cleaned = -0.00161807 Jy
! Component: 2050  -  total flux cleaned = -0.00160505 Jy
! Component: 2100  -  total flux cleaned = -0.00157928 Jy
! Component: 2150  -  total flux cleaned = -0.00155391 Jy
! Component: 2200  -  total flux cleaned = -0.00156652 Jy
! Component: 2250  -  total flux cleaned = -0.00150381 Jy
! Component: 2300  -  total flux cleaned = -0.00154099 Jy
! Component: 2350  -  total flux cleaned = -0.00150373 Jy
! Component: 2400  -  total flux cleaned = -0.00146694 Jy
! Component: 2450  -  total flux cleaned = -0.00144255 Jy
! Component: 2500  -  total flux cleaned = -0.00144254 Jy
! Component: 2550  -  total flux cleaned = -0.00140641 Jy
! Component: 2600  -  total flux cleaned = -0.0013826 Jy
! Component: 2650  -  total flux cleaned = -0.00138271 Jy
! Component: 2700  -  total flux cleaned = -0.00139447 Jy
! Component: 2750  -  total flux cleaned = -0.00137097 Jy
! Component: 2800  -  total flux cleaned = -0.00135928 Jy
! Component: 2850  -  total flux cleaned = -0.00133612 Jy
! Component: 2900  -  total flux cleaned = -0.00131313 Jy
! Component: 2950  -  total flux cleaned = -0.00130165 Jy
! Component: 3000  -  total flux cleaned = -0.00126748 Jy
! Component: 3050  -  total flux cleaned = -0.00125615 Jy
! Component: 3100  -  total flux cleaned = -0.00124493 Jy
! Component: 3150  -  total flux cleaned = -0.00124491 Jy
! Component: 3200  -  total flux cleaned = -0.00123363 Jy
! Component: 3250  -  total flux cleaned = -0.00121129 Jy
! Component: 3300  -  total flux cleaned = -0.00117794 Jy
! Component: 3350  -  total flux cleaned = -0.00116691 Jy
! Component: 3400  -  total flux cleaned = -0.00113395 Jy
! Component: 3450  -  total flux cleaned = -0.00114489 Jy
! Component: 3500  -  total flux cleaned = -0.00112309 Jy
! Component: 3550  -  total flux cleaned = -0.00110131 Jy
! Component: 3600  -  total flux cleaned = -0.001058 Jy
! Component: 3650  -  total flux cleaned = -0.00105807 Jy
! Component: 3700  -  total flux cleaned = -0.00105804 Jy
! Component: 3750  -  total flux cleaned = -0.00102588 Jy
! Component: 3800  -  total flux cleaned = -0.000983147 Jy
! Component: 3850  -  total flux cleaned = -0.000993807 Jy
! Component: 3900  -  total flux cleaned = -0.000930128 Jy
! Component: 3950  -  total flux cleaned = -0.000961881 Jy
! Component: 4000  -  total flux cleaned = -0.000951289 Jy
! Component: 4050  -  total flux cleaned = -0.000909205 Jy
! Total flux subtracted in 4096 components = -0.000877788 Jy
! Clean residual min=-0.000646 max=0.000628 Jy/beam
! Clean residual mean=0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.37772 Jy
keep
! Adding 233 model components to the UV plane model.
! The established model now contains 384 components and 0.37772 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0849+5108_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.882 x 2.548 at 47.49 degrees (North through East)
! Clean map  min=-0.0012897  max=0.33349 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0849+5108_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.33349 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000165988 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.149319 0.149319 0.298638 0.597276 1.19455 2.3891 4.77821 9.55641 19.1128 38.2257 76.4513
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.333 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2009.12 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0849+5108_X_uvs.log closed on Wed Apr  6 23:37:51 2016