! Started logfile: /scr/pima/bg219i_uvs/J0841-3136_X_dfm.log on Thu May 19 23:11:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0841-3136_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0841-3136_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.819883 visibilities/baseline/integration-bin.
! Found source: J0841-3136
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25236 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0841-3136_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034223Jy  sigma=19.728948
! Fit after  self-cal, rms=0.747536Jy  sigma=14.134669
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6158 mas, bmaj=1.522 mas, bpa=-4.908 degrees
! Estimated noise=0.517853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.189402 Jy
! Component: 100  -  total flux cleaned = 0.234428 Jy
! Total flux subtracted in 100 components = 0.234428 Jy
! Clean residual min=-0.007645 max=0.017649 Jy/beam
! Clean residual mean=0.000011 rms=0.001894 Jy/beam
! Combined flux in latest and established models = 0.234428 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.234428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085898Jy  sigma=1.563732
! Fit after  self-cal, rms=0.085881Jy  sigma=1.563140
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198877 Jy
! Component: 100  -  total flux cleaned = 0.0312548 Jy
! Total flux subtracted in 100 components = 0.0312548 Jy
! Clean residual min=-0.005535 max=0.008270 Jy/beam
! Clean residual mean=0.000003 rms=0.001209 Jy/beam
! Combined flux in latest and established models = 0.265683 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.265683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079112Jy  sigma=1.406868
! Fit after  self-cal, rms=0.079106Jy  sigma=1.406336
! Inverting map 
! Added new window around map position (-0.8, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00784137 Jy
! Component: 100  -  total flux cleaned = 0.0125938 Jy
! Total flux subtracted in 100 components = 0.0125938 Jy
! Clean residual min=-0.004784 max=0.006431 Jy/beam
! Clean residual mean=0.000000 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.278277 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.278277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078002Jy  sigma=1.380390
! Fit after  self-cal, rms=0.077969Jy  sigma=1.379122
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8174 mas, bmaj=2.032 mas, bpa=-4.711 degrees
! Estimated noise=0.242804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00704548 Jy
! Component: 100  -  total flux cleaned = 0.0106242 Jy
! Component: 150  -  total flux cleaned = 0.0117074 Jy
! Component: 200  -  total flux cleaned = 0.01192 Jy
! Total flux subtracted in 200 components = 0.01192 Jy
! Clean residual min=-0.003914 max=0.004896 Jy/beam
! Clean residual mean=-0.000002 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.290197 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.290197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077340Jy  sigma=1.366173
! Fit after  self-cal, rms=0.077323Jy  sigma=1.365608
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8174 x 2.032 at -4.711 degrees (North through East)
! Clean map  min=-0.0034816  max=0.25223 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.16     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.15     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.04     OV        0.97     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.12     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.95     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.12     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.96     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.12     KP        0.98     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.12     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.96     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.08     KP        0.97     
!   LA        0.99     MK        0.97     NL        0.99     OV        0.96     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.12     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.00     OV        0.95     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.16     KP        0.96     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.96     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.16     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.96     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.13     KP        0.97     
!   LA        1.00     MK        1.00     NL        0.98     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.11     KP        0.97     
!   LA        0.99     MK        0.98     NL        1.01     OV        0.95     
!   PT        1.01     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.077323Jy  sigma=1.365608
! Fit after  self-cal, rms=0.078617Jy  sigma=1.349806
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8189 mas, bmaj=2.029 mas, bpa=-4.6 degrees
! Estimated noise=0.242241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00313711 Jy
! Component: 100  -  total flux cleaned = -0.00378985 Jy
! Component: 150  -  total flux cleaned = -0.00398244 Jy
! Component: 200  -  total flux cleaned = -0.00414598 Jy
! Total flux subtracted in 200 components = -0.00414598 Jy
! Clean residual min=-0.002659 max=0.002992 Jy/beam
! Clean residual mean=-0.000005 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.286051 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 0.286051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078465Jy  sigma=1.346406
! Fit after  self-cal, rms=0.078509Jy  sigma=1.346168
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078509Jy  sigma=1.346168
! Fit after  self-cal, rms=0.078698Jy  sigma=1.337063
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8204 mas, bmaj=2.032 mas, bpa=-4.555 degrees
! Estimated noise=0.241854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000406625 Jy
! Component: 100  -  total flux cleaned = -0.000446454 Jy
! Component: 150  -  total flux cleaned = -0.000471863 Jy
! Component: 200  -  total flux cleaned = -0.000471825 Jy
! Total flux subtracted in 200 components = -0.000471825 Jy
! Clean residual min=-0.001506 max=0.001717 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.285579 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.285579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078666Jy  sigma=1.336526
! Fit after  self-cal, rms=0.078682Jy  sigma=1.336432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -25.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000990277 Jy
! Component: 100  -  total flux cleaned = 0.000796835 Jy
! Component: 150  -  total flux cleaned = 0.000661505 Jy
! Component: 200  -  total flux cleaned = 0.000540588 Jy
! Total flux subtracted in 200 components = 0.000540588 Jy
! Clean residual min=-0.001397 max=0.001613 Jy/beam
! Clean residual mean=-0.000000 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.28612 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.28612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078640Jy  sigma=1.335593
! Fit after  self-cal, rms=0.078638Jy  sigma=1.335529
! Inverting map 
! Added new window around map position (41.4, -45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121247 Jy
! Component: 100  -  total flux cleaned = 0.00149013 Jy
! Component: 150  -  total flux cleaned = 0.00149101 Jy
! Component: 200  -  total flux cleaned = 0.00146445 Jy
! Total flux subtracted in 200 components = 0.00146445 Jy
! Clean residual min=-0.001357 max=0.001411 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.287584 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.287584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078601Jy  sigma=1.334875
! Fit after  self-cal, rms=0.078600Jy  sigma=1.334846
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078600Jy  sigma=1.334846
! Fit after  self-cal, rms=0.078761Jy  sigma=1.334669
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8208 mas, bmaj=2.032 mas, bpa=-4.518 degrees
! Estimated noise=0.241653 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.48511e-06 Jy
! Component: 100  -  total flux cleaned = -7.75879e-05 Jy
! Component: 150  -  total flux cleaned = -0.000149436 Jy
! Component: 200  -  total flux cleaned = -0.00017106 Jy
! Total flux subtracted in 200 components = -0.00017106 Jy
! Clean residual min=-0.001273 max=0.001427 Jy/beam
! Clean residual mean=-0.000000 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.287413 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 85 components and 0.287413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078744Jy  sigma=1.334395
! Fit after  self-cal, rms=0.078746Jy  sigma=1.334382
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.8, -41.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00074281 Jy
! Component: 100  -  total flux cleaned = 0.000655561 Jy
! Component: 150  -  total flux cleaned = 0.000628231 Jy
! Component: 200  -  total flux cleaned = 0.000628041 Jy
! Total flux subtracted in 200 components = 0.000628041 Jy
! Clean residual min=-0.001285 max=0.001238 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.288041 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 105 components and 0.288041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078717Jy  sigma=1.333917
! Fit after  self-cal, rms=0.078715Jy  sigma=1.333909
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078715Jy  sigma=1.333909
! Fit after  self-cal, rms=0.078685Jy  sigma=1.333875
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=6.205 mas, bpa=0.03647 degrees
! Estimated noise=0.313165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000325309 Jy
! Component: 100  -  total flux cleaned = -0.000369965 Jy
! Component: 150  -  total flux cleaned = -0.000350315 Jy
! Component: 200  -  total flux cleaned = -0.000300696 Jy
! Total flux subtracted in 200 components = -0.000300696 Jy
! Clean residual min=-0.001278 max=0.001121 Jy/beam
! Clean residual mean=-0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.28774 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 116 components and 0.28774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078678Jy  sigma=1.333826
! Fit after  self-cal, rms=0.078677Jy  sigma=1.333817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102517 Jy
! Component: 100  -  total flux cleaned = -8.7291e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010184 Jy
! Component: 200  -  total flux cleaned = -8.86879e-05 Jy
! Total flux subtracted in 200 components = -8.86879e-05 Jy
! Clean residual min=-0.001252 max=0.001124 Jy/beam
! Clean residual mean=-0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.287652 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 125 components and 0.287652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078674Jy  sigma=1.333822
! Fit after  self-cal, rms=0.078674Jy  sigma=1.333817
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.821 mas, bmaj=2.033 mas, bpa=-4.511 degrees
! Estimated noise=0.241415 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.821 x 2.033 at -4.511 degrees (North through East)
! Clean map  min=-0.0021523  max=0.25246 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6171 mas, bmaj=1.518 mas, bpa=-4.575 degrees
! Estimated noise=0.51646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.188673 Jy
! Component: 100  -  total flux cleaned = 0.233668 Jy
! Component: 150  -  total flux cleaned = 0.252905 Jy
! Component: 200  -  total flux cleaned = 0.264028 Jy
! Total flux subtracted in 200 components = 0.264028 Jy
! Clean residual min=-0.003756 max=0.005516 Jy/beam
! Clean residual mean=0.000004 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.264028 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.264028 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.821 mas, bmaj=2.033 mas, bpa=-4.511 degrees
! Estimated noise=0.241415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104586 Jy
! Component: 100  -  total flux cleaned = 0.0156202 Jy
! Component: 150  -  total flux cleaned = 0.018599 Jy
! Component: 200  -  total flux cleaned = 0.02075 Jy
! Total flux subtracted in 200 components = 0.02075 Jy
! Clean residual min=-0.001678 max=0.002220 Jy/beam
! Clean residual mean=-0.000000 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.284778 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 42 components and 0.284778 Jy
! Inverting map 
! Added new window around map position (2.4, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020714 Jy
! Component: 100  -  total flux cleaned = 0.00284574 Jy
! Component: 150  -  total flux cleaned = 0.0032648 Jy
! Component: 200  -  total flux cleaned = 0.00359294 Jy
! Total flux subtracted in 200 components = 0.00359294 Jy
! Clean residual min=-0.001521 max=0.001495 Jy/beam
! Clean residual mean=-0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.288371 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 58 components and 0.288371 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=6.205 mas, bpa=0.03647 degrees
! Estimated noise=0.313165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351243 Jy
! Component: 100  -  total flux cleaned = 0.000421509 Jy
! Component: 150  -  total flux cleaned = 0.000452376 Jy
! Component: 200  -  total flux cleaned = 0.000522445 Jy
! Total flux subtracted in 200 components = 0.000522445 Jy
! Clean residual min=-0.001230 max=0.001248 Jy/beam
! Clean residual mean=-0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.288894 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.02228e-05 Jy
! Component: 100  -  total flux cleaned = 7.66356e-05 Jy
! Component: 150  -  total flux cleaned = 9.3715e-05 Jy
! Component: 200  -  total flux cleaned = 7.8166e-05 Jy
! Total flux subtracted in 200 components = 7.8166e-05 Jy
! Clean residual min=-0.001246 max=0.001190 Jy/beam
! Clean residual mean=-0.000000 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.288972 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 85 components and 0.288972 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.821 mas, bmaj=2.033 mas, bpa=-4.511 degrees
! Estimated noise=0.241415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128315 Jy
! Component: 100  -  total flux cleaned = -0.000164582 Jy
! Component: 150  -  total flux cleaned = -0.000163077 Jy
! Component: 200  -  total flux cleaned = -0.000163189 Jy
! Total flux subtracted in 200 components = -0.000163189 Jy
! Clean residual min=-0.001281 max=0.001268 Jy/beam
! Clean residual mean=-0.000000 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.288809 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 108 components and 0.288809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078705Jy  sigma=1.334403
! Fit after  self-cal, rms=0.078693Jy  sigma=1.334316
wmodel /J0841-3136_X_map.mod
! wmodel: Unable to open new model file: /J0841-3136_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0841-3136_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.821 x 2.033 at -4.511 degrees (North through East)
! Clean map  min=-0.0012026  max=0.25393 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0841-3136_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.253927 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000304896 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.360218 0.360218 0.720435 1.44087 2.88174 5.76348 11.527 23.0539 46.1079 92.2157
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.253 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  832.829 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0841-3136_X_dfm.log closed on Thu May 19 23:11:12 2016