! Started logfile: /scr/pima/bg219i_uvs/J0838-3836_S_dfm.log on Thu May 19 23:10:57 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J0838-3836_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0838-3836_S_uva.fits
! AN table 1: 31 integrations on 21 of 21 possible baselines.
! AN table 2: 30 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.754527 visibilities/baseline/integration-bin.
! Found source: J0838-3836
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0838-3836_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.007171Jy  sigma=16.925090
! Fit after  self-cal, rms=0.937681Jy  sigma=15.764341
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.909 mas, bmaj=7.975 mas, bpa=4.384 degrees
! Estimated noise=1.15065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0484327 Jy
! Component: 100  -  total flux cleaned = 0.0600938 Jy
! Total flux subtracted in 100 components = 0.0600938 Jy
! Clean residual min=-0.005848 max=0.007265 Jy/beam
! Clean residual mean=-0.000036 rms=0.001650 Jy/beam
! Combined flux in latest and established models = 0.0600938 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0600938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078816Jy  sigma=1.285480
! Fit after  self-cal, rms=0.077064Jy  sigma=1.257114
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.938 mas, bmaj=11.26 mas, bpa=3.815 degrees
! Estimated noise=0.663246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00731734 Jy
! Component: 100  -  total flux cleaned = 0.00970073 Jy
! Component: 150  -  total flux cleaned = 0.0105748 Jy
! Component: 200  -  total flux cleaned = 0.0106451 Jy
! Total flux subtracted in 200 components = 0.0106451 Jy
! Clean residual min=-0.003729 max=0.005011 Jy/beam
! Clean residual mean=-0.000038 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.0707389 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.0707389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076468Jy  sigma=1.247159
! Fit after  self-cal, rms=0.076410Jy  sigma=1.246813
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.938 x 11.26 at 3.815 degrees (North through East)
! Clean map  min=-0.0035287  max=0.064904 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        1.09     KP        1.05     LA        1.07     
!   MK        0.88     OV        1.00     PT        0.93     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     FD        0.96     KP        1.20     LA        1.03     
!   MK        0.97     OV        0.93     PT        1.02     SC        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.96     LA        0.96     NL        0.92     
!   OV        1.03     PT        1.03     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     FD        0.94     KP        1.15     LA        0.88     
!   MK        1.02     OV        0.89     PT        1.01     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.076410Jy  sigma=1.246813
! Fit after  self-cal, rms=0.076895Jy  sigma=1.243744
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.924 mas, bmaj=11.24 mas, bpa=3.737 degrees
! Estimated noise=0.665834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444069 Jy
! Component: 100  -  total flux cleaned = 0.00607239 Jy
! Component: 150  -  total flux cleaned = 0.00627098 Jy
! Component: 200  -  total flux cleaned = 0.00639396 Jy
! Total flux subtracted in 200 components = 0.00639396 Jy
! Clean residual min=-0.002718 max=0.002627 Jy/beam
! Clean residual mean=-0.000003 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0771328 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.0771328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076639Jy  sigma=1.240043
! Fit after  self-cal, rms=0.076653Jy  sigma=1.237896
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076653Jy  sigma=1.237896
! Fit after  self-cal, rms=0.076691Jy  sigma=1.235144
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.914 mas, bmaj=11.24 mas, bpa=3.677 degrees
! Estimated noise=0.656952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024842 Jy
! Component: 100  -  total flux cleaned = 0.00260172 Jy
! Component: 150  -  total flux cleaned = 0.00253289 Jy
! Component: 200  -  total flux cleaned = 0.00242096 Jy
! Total flux subtracted in 200 components = 0.00242096 Jy
! Clean residual min=-0.002673 max=0.002796 Jy/beam
! Clean residual mean=-0.000010 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.0795538 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 64 components and 0.0795538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076593Jy  sigma=1.233964
! Fit after  self-cal, rms=0.076683Jy  sigma=1.232966
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128322 Jy
! Component: 100  -  total flux cleaned = 0.00116399 Jy
! Component: 150  -  total flux cleaned = 0.00107048 Jy
! Component: 200  -  total flux cleaned = 0.000991381 Jy
! Total flux subtracted in 200 components = 0.000991381 Jy
! Clean residual min=-0.002758 max=0.002651 Jy/beam
! Clean residual mean=-0.000009 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.0805452 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 0.0805452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076641Jy  sigma=1.232569
! Fit after  self-cal, rms=0.076648Jy  sigma=1.232224
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076648Jy  sigma=1.232224
! Fit after  self-cal, rms=0.076320Jy  sigma=1.231886
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.901 mas, bmaj=11.23 mas, bpa=3.558 degrees
! Estimated noise=0.650748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000839721 Jy
! Component: 100  -  total flux cleaned = 0.000708112 Jy
! Component: 150  -  total flux cleaned = 0.000584408 Jy
! Component: 200  -  total flux cleaned = 0.000531303 Jy
! Total flux subtracted in 200 components = 0.000531303 Jy
! Clean residual min=-0.002546 max=0.002594 Jy/beam
! Clean residual mean=-0.000011 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.0810765 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 100 components and 0.0810765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076291Jy  sigma=1.231618
! Fit after  self-cal, rms=0.076321Jy  sigma=1.231351
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000331711 Jy
! Component: 100  -  total flux cleaned = 0.000211096 Jy
! Component: 150  -  total flux cleaned = 0.000148152 Jy
! Component: 200  -  total flux cleaned = 0.000105883 Jy
! Total flux subtracted in 200 components = 0.000105883 Jy
! Clean residual min=-0.002595 max=0.002526 Jy/beam
! Clean residual mean=-0.000011 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.0811824 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 104 components and 0.0811824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076302Jy  sigma=1.231238
! Fit after  self-cal, rms=0.076301Jy  sigma=1.230993
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076301Jy  sigma=1.230993
! Fit after  self-cal, rms=0.075929Jy  sigma=1.230893
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.11 mas, bmaj=32.86 mas, bpa=7.237 degrees
! Estimated noise=0.783024 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226962 Jy
! Component: 100  -  total flux cleaned = 0.000197281 Jy
! Component: 150  -  total flux cleaned = 0.000145973 Jy
! Component: 200  -  total flux cleaned = 0.000111863 Jy
! Total flux subtracted in 200 components = 0.000111863 Jy
! Clean residual min=-0.002765 max=0.003090 Jy/beam
! Clean residual mean=-0.000018 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.0812942 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 117 components and 0.0812943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075919Jy  sigma=1.230848
! Fit after  self-cal, rms=0.075928Jy  sigma=1.230710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018719 Jy
! Component: 100  -  total flux cleaned = 0.000153199 Jy
! Component: 150  -  total flux cleaned = 0.000122372 Jy
! Component: 200  -  total flux cleaned = 8.53841e-05 Jy
! Total flux subtracted in 200 components = 8.53841e-05 Jy
! Clean residual min=-0.002675 max=0.002985 Jy/beam
! Clean residual mean=-0.000023 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.0813796 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 120 components and 0.0813796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075922Jy  sigma=1.230696
! Fit after  self-cal, rms=0.075859Jy  sigma=1.229983
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=11.22 mas, bpa=3.387 degrees
! Estimated noise=0.645972 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.891 x 11.22 at 3.387 degrees (North through East)
! Clean map  min=-0.0027186  max=0.064326 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.895 mas, bmaj=7.987 mas, bpa=3.973 degrees
! Estimated noise=1.11634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.048128 Jy
! Component: 100  -  total flux cleaned = 0.062934 Jy
! Component: 150  -  total flux cleaned = 0.0702034 Jy
! Component: 200  -  total flux cleaned = 0.0743705 Jy
! Total flux subtracted in 200 components = 0.0743705 Jy
! Clean residual min=-0.004685 max=0.004515 Jy/beam
! Clean residual mean=-0.000013 rms=0.001307 Jy/beam
! Combined flux in latest and established models = 0.0743705 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0743705 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=11.22 mas, bpa=3.387 degrees
! Estimated noise=0.645972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389772 Jy
! Component: 100  -  total flux cleaned = 0.00593602 Jy
! Component: 150  -  total flux cleaned = 0.00638985 Jy
! Component: 200  -  total flux cleaned = 0.00653095 Jy
! Total flux subtracted in 200 components = 0.00653095 Jy
! Clean residual min=-0.002737 max=0.002627 Jy/beam
! Clean residual mean=-0.000008 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.0809014 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 39 components and 0.0809014 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.11 mas, bmaj=32.86 mas, bpa=7.237 degrees
! Estimated noise=0.783024 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585873 Jy
! Component: 100  -  total flux cleaned = 0.000700798 Jy
! Component: 150  -  total flux cleaned = 0.000764053 Jy
! Component: 200  -  total flux cleaned = 0.000840649 Jy
! Total flux subtracted in 200 components = 0.000840649 Jy
! Clean residual min=-0.002889 max=0.002957 Jy/beam
! Clean residual mean=-0.000010 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.0817421 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.36512e-05 Jy
! Component: 100  -  total flux cleaned = 8.19624e-05 Jy
! Component: 150  -  total flux cleaned = 0.000131805 Jy
! Component: 200  -  total flux cleaned = 0.000145661 Jy
! Total flux subtracted in 200 components = 0.000145661 Jy
! Clean residual min=-0.002847 max=0.002960 Jy/beam
! Clean residual mean=-0.000010 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.0818878 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 68 components and 0.0818877 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=11.22 mas, bpa=3.387 degrees
! Estimated noise=0.645972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.96216e-05 Jy
! Component: 100  -  total flux cleaned = 9.28442e-05 Jy
! Component: 150  -  total flux cleaned = 0.000141058 Jy
! Component: 200  -  total flux cleaned = 0.00018471 Jy
! Total flux subtracted in 200 components = 0.00018471 Jy
! Clean residual min=-0.002635 max=0.002585 Jy/beam
! Clean residual mean=-0.000006 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.0820724 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 92 components and 0.0820725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075878Jy  sigma=1.230434
! Fit after  self-cal, rms=0.075883Jy  sigma=1.230282
wmodel /J0838-3836_S_map.mod
! wmodel: Unable to open new model file: /J0838-3836_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0838-3836_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.891 x 11.22 at 3.387 degrees (North through East)
! Clean map  min=-0.0026504  max=0.064024 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0838-3836_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0640238 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000667769 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.129 3.129 6.258 12.516 25.032 50.064
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.064 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  95.877 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0838-3836_S_dfm.log closed on Thu May 19 23:10:59 2016