! Started logfile: /scr/pima/bg219i_uvs/J0836-2016_X_dfm.log on Thu May 19 23:10:44 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0836-2016_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0836-2016_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.885714 visibilities/baseline/integration-bin.
! Found source: J0836-2016
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3348 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0836-2016_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.994092Jy  sigma=21.598920
! Fit after  self-cal, rms=0.751391Jy  sigma=8.233271
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.567 mas, bmaj=1.654 mas, bpa=1.785 degrees
! Estimated noise=1.77533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.17251 Jy
! Component: 100  -  total flux cleaned = 1.49548 Jy
! Total flux subtracted in 100 components = 1.49548 Jy
! Clean residual min=-0.068395 max=0.147431 Jy/beam
! Clean residual mean=-0.000002 rms=0.017896 Jy/beam
! Combined flux in latest and established models = 1.49548 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 1.49548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.344267Jy  sigma=3.830878
! Fit after  self-cal, rms=0.344207Jy  sigma=3.830495
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170381 Jy
! Component: 100  -  total flux cleaned = 0.270085 Jy
! Total flux subtracted in 100 components = 0.270085 Jy
! Clean residual min=-0.038816 max=0.050287 Jy/beam
! Clean residual mean=0.000004 rms=0.008487 Jy/beam
! Combined flux in latest and established models = 1.76556 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 1.76556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.178475Jy  sigma=1.978925
! Fit after  self-cal, rms=0.178417Jy  sigma=1.978710
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0586425 Jy
! Component: 100  -  total flux cleaned = 0.0930669 Jy
! Total flux subtracted in 100 components = 0.0930669 Jy
! Clean residual min=-0.030471 max=0.035338 Jy/beam
! Clean residual mean=0.000006 rms=0.006513 Jy/beam
! Combined flux in latest and established models = 1.85863 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 1.85863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.144937Jy  sigma=1.554229
! Fit after  self-cal, rms=0.144883Jy  sigma=1.553936
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7758 mas, bmaj=2.02 mas, bpa=1.772 degrees
! Estimated noise=1.31004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0370695 Jy
! Component: 100  -  total flux cleaned = 0.053562 Jy
! Component: 150  -  total flux cleaned = 0.0612617 Jy
! Component: 200  -  total flux cleaned = 0.062599 Jy
! Total flux subtracted in 200 components = 0.062599 Jy
! Clean residual min=-0.029100 max=0.042541 Jy/beam
! Clean residual mean=0.000023 rms=0.008724 Jy/beam
! Combined flux in latest and established models = 1.92123 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 1.92123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.137652Jy  sigma=1.419608
! Fit after  self-cal, rms=0.137622Jy  sigma=1.419011
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7758 x 2.02 at 1.772 degrees (North through East)
! Clean map  min=-0.027813  max=1.6529 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.07     KP        0.96     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.95     
!   PT        1.09     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.09     KP        0.94     
!   LA        0.99     MK        1.02     NL        0.99     OV        0.94     
!   PT        1.11     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.05     KP        0.97     
!   LA        0.99     MK        1.02     NL        0.99     OV        0.93     
!   PT        1.09     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.05     KP        0.97     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.94     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        0.96     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.95     
!   PT        1.11     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.08     KP        0.97     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.94     
!   PT        1.11     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.06     KP        0.97     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.96     
!   PT        1.11     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.06     KP        0.97     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.94     
!   PT        1.09     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        0.97     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.94     
!   PT        1.12     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        1.05     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.00     OV        0.93     
!   PT        1.10     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.09     KP        0.97     
!   LA        1.00     MK        1.02     NL        0.98     OV        0.96     
!   PT        1.11     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.06     KP        0.94     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.95     
!   PT        1.10     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.137622Jy  sigma=1.419011
! Fit after  self-cal, rms=0.098470Jy  sigma=0.957482
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7781 mas, bmaj=2.017 mas, bpa=1.93 degrees
! Estimated noise=1.30845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235328 Jy
! Component: 100  -  total flux cleaned = 0.0369553 Jy
! Component: 150  -  total flux cleaned = 0.0459219 Jy
! Component: 200  -  total flux cleaned = 0.0504172 Jy
! Total flux subtracted in 200 components = 0.0504172 Jy
! Clean residual min=-0.008638 max=0.011595 Jy/beam
! Clean residual mean=-0.000004 rms=0.002263 Jy/beam
! Combined flux in latest and established models = 1.97164 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 59 components and 1.97164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090991Jy  sigma=0.892978
! Fit after  self-cal, rms=0.090488Jy  sigma=0.888690
! Inverting map 
! Added new window around map position (-1.8, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112968 Jy
! Component: 100  -  total flux cleaned = 0.0178133 Jy
! Component: 150  -  total flux cleaned = 0.0221086 Jy
! Component: 200  -  total flux cleaned = 0.0242113 Jy
! Total flux subtracted in 200 components = 0.0242113 Jy
! Clean residual min=-0.007380 max=0.007441 Jy/beam
! Clean residual mean=-0.000002 rms=0.001805 Jy/beam
! Combined flux in latest and established models = 1.99586 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 84 components and 1.99586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088590Jy  sigma=0.872122
! Fit after  self-cal, rms=0.088409Jy  sigma=0.870914
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088409Jy  sigma=0.870914
! Fit after  self-cal, rms=0.087436Jy  sigma=0.861649
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7778 mas, bmaj=2.016 mas, bpa=1.903 degrees
! Estimated noise=1.30518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468333 Jy
! Component: 100  -  total flux cleaned = 0.00736096 Jy
! Component: 150  -  total flux cleaned = 0.00900373 Jy
! Component: 200  -  total flux cleaned = 0.00969993 Jy
! Total flux subtracted in 200 components = 0.00969993 Jy
! Clean residual min=-0.005725 max=0.006301 Jy/beam
! Clean residual mean=-0.000001 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 2.00556 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 94 components and 2.00556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086807Jy  sigma=0.855616
! Fit after  self-cal, rms=0.086738Jy  sigma=0.855250
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156437 Jy
! Component: 100  -  total flux cleaned = 0.00195816 Jy
! Component: 150  -  total flux cleaned = 0.00213924 Jy
! Component: 200  -  total flux cleaned = 0.00247761 Jy
! Total flux subtracted in 200 components = 0.00247761 Jy
! Clean residual min=-0.005339 max=0.006164 Jy/beam
! Clean residual mean=-0.000001 rms=0.001507 Jy/beam
! Combined flux in latest and established models = 2.00803 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 107 components and 2.00803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086550Jy  sigma=0.853105
! Fit after  self-cal, rms=0.086533Jy  sigma=0.853051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086533Jy  sigma=0.853051
! Fit after  self-cal, rms=0.086443Jy  sigma=0.851975
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.017 mas, bpa=1.886 degrees
! Estimated noise=1.30437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122137 Jy
! Component: 100  -  total flux cleaned = 0.00176655 Jy
! Component: 150  -  total flux cleaned = 0.00216225 Jy
! Component: 200  -  total flux cleaned = 0.0023068 Jy
! Total flux subtracted in 200 components = 0.0023068 Jy
! Clean residual min=-0.005239 max=0.006169 Jy/beam
! Clean residual mean=-0.000001 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 2.01034 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 116 components and 2.01034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086240Jy  sigma=0.850211
! Fit after  self-cal, rms=0.086218Jy  sigma=0.850110
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 25.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356855 Jy
! Component: 100  -  total flux cleaned = 0.00334627 Jy
! Component: 150  -  total flux cleaned = 0.00315484 Jy
! Component: 200  -  total flux cleaned = 0.00289776 Jy
! Total flux subtracted in 200 components = 0.00289776 Jy
! Clean residual min=-0.005188 max=0.005505 Jy/beam
! Clean residual mean=-0.000001 rms=0.001297 Jy/beam
! Combined flux in latest and established models = 2.01324 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 129 components and 2.01324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085852Jy  sigma=0.845619
! Fit after  self-cal, rms=0.085817Jy  sigma=0.845376
! Inverting map 
! Added new window around map position (-7.4, 30.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346844 Jy
! Component: 100  -  total flux cleaned = 0.00475994 Jy
! Component: 150  -  total flux cleaned = 0.00549772 Jy
! Component: 200  -  total flux cleaned = 0.00584067 Jy
! Total flux subtracted in 200 components = 0.00584067 Jy
! Clean residual min=-0.004704 max=0.004793 Jy/beam
! Clean residual mean=-0.000001 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 2.01908 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 155 components and 2.01908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085416Jy  sigma=0.842183
! Fit after  self-cal, rms=0.085414Jy  sigma=0.842030
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085414Jy  sigma=0.842030
! Fit after  self-cal, rms=0.085349Jy  sigma=0.841064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.978 mas, bmaj=4.809 mas, bpa=10.46 degrees
! Estimated noise=1.81519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00239586 Jy
! Component: 100  -  total flux cleaned = 0.00399308 Jy
! Component: 150  -  total flux cleaned = 0.00514958 Jy
! Component: 200  -  total flux cleaned = 0.00561461 Jy
! Total flux subtracted in 200 components = 0.00561461 Jy
! Clean residual min=-0.005992 max=0.005698 Jy/beam
! Clean residual mean=-0.000001 rms=0.001653 Jy/beam
! Combined flux in latest and established models = 2.02469 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 164 components and 2.02469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085154Jy  sigma=0.840750
! Fit after  self-cal, rms=0.085167Jy  sigma=0.840631
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305549 Jy
! Component: 100  -  total flux cleaned = 0.00037208 Jy
! Component: 150  -  total flux cleaned = 0.000309386 Jy
! Component: 200  -  total flux cleaned = 0.000193161 Jy
! Total flux subtracted in 200 components = 0.000193161 Jy
! Clean residual min=-0.005732 max=0.005734 Jy/beam
! Clean residual mean=-0.000001 rms=0.001596 Jy/beam
! Combined flux in latest and established models = 2.02489 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 173 components and 2.02489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085089Jy  sigma=0.840395
! Fit after  self-cal, rms=0.085091Jy  sigma=0.840372
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7782 mas, bmaj=2.018 mas, bpa=1.867 degrees
! Estimated noise=1.30357 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7782 x 2.018 at 1.867 degrees (North through East)
! Clean map  min=-0.0044246  max=1.649 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085091Jy  sigma=0.840372
! Fit after  self-cal, rms=0.073816Jy  sigma=0.702184
! Inverting map and beam 
! Estimated beam: bmin=0.7782 mas, bmaj=2.018 mas, bpa=1.869 degrees
! Estimated noise=1.30339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00021851 Jy
! Component: 100  -  total flux cleaned = -0.000524903 Jy
! Component: 150  -  total flux cleaned = -0.00118101 Jy
! Component: 200  -  total flux cleaned = -0.00186152 Jy
! Total flux subtracted in 200 components = -0.00186152 Jy
! Clean residual min=-0.004344 max=0.003971 Jy/beam
! Clean residual mean=-0.000001 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 2.02302 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 190 components and 2.02302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073583Jy  sigma=0.698868
! Fit after  self-cal, rms=0.073570Jy  sigma=0.698812
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246017 Jy
! Component: 100  -  total flux cleaned = -0.000394028 Jy
! Component: 150  -  total flux cleaned = -0.000602713 Jy
! Component: 200  -  total flux cleaned = -0.000796634 Jy
! Total flux subtracted in 200 components = -0.000796634 Jy
! Clean residual min=-0.004158 max=0.003895 Jy/beam
! Clean residual mean=-0.000001 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 2.02223 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 195 components and 2.02223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073452Jy  sigma=0.697342
! Fit after  self-cal, rms=0.073442Jy  sigma=0.697311
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073442Jy  sigma=0.697311
! Fit after  self-cal, rms=0.073386Jy  sigma=0.697103
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5682 mas, bmaj=1.648 mas, bpa=2.026 degrees
! Estimated noise=1.77603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1729 Jy
! Component: 100  -  total flux cleaned = 1.49315 Jy
! Component: 150  -  total flux cleaned = 1.66199 Jy
! Component: 200  -  total flux cleaned = 1.7605 Jy
! Total flux subtracted in 200 components = 1.7605 Jy
! Clean residual min=-0.026610 max=0.049480 Jy/beam
! Clean residual mean=-0.000007 rms=0.006333 Jy/beam
! Combined flux in latest and established models = 1.7605 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.7605 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.018 mas, bpa=1.859 degrees
! Estimated noise=1.30308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0814146 Jy
! Component: 100  -  total flux cleaned = 0.121184 Jy
! Component: 150  -  total flux cleaned = 0.147788 Jy
! Component: 200  -  total flux cleaned = 0.166939 Jy
! Total flux subtracted in 200 components = 0.166939 Jy
! Clean residual min=-0.009127 max=0.011897 Jy/beam
! Clean residual mean=-0.000010 rms=0.002973 Jy/beam
! Combined flux in latest and established models = 1.92744 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 42 components and 1.92744 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.979 mas, bmaj=4.809 mas, bpa=10.45 degrees
! Estimated noise=1.8142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0269504 Jy
! Component: 100  -  total flux cleaned = 0.0434855 Jy
! Component: 150  -  total flux cleaned = 0.054592 Jy
! Component: 200  -  total flux cleaned = 0.0624991 Jy
! Total flux subtracted in 200 components = 0.0624991 Jy
! Clean residual min=-0.006961 max=0.006687 Jy/beam
! Clean residual mean=-0.000010 rms=0.002173 Jy/beam
! Combined flux in latest and established models = 1.98994 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624584 Jy
! Component: 100  -  total flux cleaned = 0.0112711 Jy
! Component: 150  -  total flux cleaned = 0.0149841 Jy
! Component: 200  -  total flux cleaned = 0.0175872 Jy
! Total flux subtracted in 200 components = 0.0175872 Jy
! Clean residual min=-0.005646 max=0.004830 Jy/beam
! Clean residual mean=-0.000007 rms=0.001610 Jy/beam
! Combined flux in latest and established models = 2.00752 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 97 components and 2.00752 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.018 mas, bpa=1.859 degrees
! Estimated noise=1.30308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440567 Jy
! Component: 100  -  total flux cleaned = 0.00516494 Jy
! Component: 150  -  total flux cleaned = 0.00616225 Jy
! Component: 200  -  total flux cleaned = 0.00691463 Jy
! Total flux subtracted in 200 components = 0.00691463 Jy
! Clean residual min=-0.004879 max=0.005215 Jy/beam
! Clean residual mean=-0.000003 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 2.01444 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 2.01444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074375Jy  sigma=0.712618
! Fit after  self-cal, rms=0.074301Jy  sigma=0.711059
wmodel /J0836-2016_X_map.mod
! wmodel: Unable to open new model file: /J0836-2016_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0836-2016_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.778 x 2.018 at 1.859 degrees (North through East)
! Clean map  min=-0.0044498  max=1.6456 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0836-2016_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.64555 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00114917 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.209505 0.209505 0.41901 0.83802 1.67604 3.35208 6.70416 13.4083 26.8166 53.6333
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0034 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.645 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1431.95 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0836-2016_X_dfm.log closed on Thu May 19 23:10:46 2016