! Started logfile: /scr/pima/bg219i_uvs/J0825-3218_X_uvs.log on Wed Apr  6 23:36:50 2016
obs /scr/pima/bg219i_uvs/J0825-3218_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0825-3218_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.815709 visibilities/baseline/integration-bin.
! Found source: J0825-3218
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25548 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0825-3218_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.066092Jy  sigma=20.102518
! Fit after  self-cal, rms=0.616585Jy  sigma=11.550934
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6346 mas, bmaj=1.608 mas, bpa=-5.186 degrees
! Estimated noise=0.599471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.286563 Jy
! Component: 100  -  total flux cleaned = 0.359054 Jy
! Total flux subtracted in 100 components = 0.359054 Jy
! Clean residual min=-0.013439 max=0.031493 Jy/beam
! Clean residual mean=-0.000025 rms=0.003612 Jy/beam
! Combined flux in latest and established models = 0.359054 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.359054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.100432Jy  sigma=1.882512
! Fit after  self-cal, rms=0.100375Jy  sigma=1.881517
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360099 Jy
! Component: 100  -  total flux cleaned = 0.0559779 Jy
! Total flux subtracted in 100 components = 0.0559779 Jy
! Clean residual min=-0.007457 max=0.014696 Jy/beam
! Clean residual mean=-0.000010 rms=0.001985 Jy/beam
! Combined flux in latest and established models = 0.415032 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.415032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.082234Jy  sigma=1.480354
! Fit after  self-cal, rms=0.082214Jy  sigma=1.479877
! Inverting map 
! Added new window around map position (0.6, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013833 Jy
! Component: 100  -  total flux cleaned = 0.0216712 Jy
! Total flux subtracted in 100 components = 0.0216712 Jy
! Clean residual min=-0.006588 max=0.010203 Jy/beam
! Clean residual mean=-0.000005 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 0.436704 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.436704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.079437Jy  sigma=1.417699
! Fit after  self-cal, rms=0.079297Jy  sigma=1.414390
! Inverting map 
! Added new window around map position (-1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00957238 Jy
! Component: 100  -  total flux cleaned = 0.015186 Jy
! Total flux subtracted in 100 components = 0.015186 Jy
! Clean residual min=-0.005594 max=0.007635 Jy/beam
! Clean residual mean=-0.000002 rms=0.001389 Jy/beam
! Combined flux in latest and established models = 0.45189 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.45189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078098Jy  sigma=1.390633
! Fit after  self-cal, rms=0.077955Jy  sigma=1.387703
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8164 mas, bmaj=2.017 mas, bpa=-4.146 degrees
! Estimated noise=0.317083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00524126 Jy
! Component: 100  -  total flux cleaned = 0.00792387 Jy
! Component: 150  -  total flux cleaned = 0.00929802 Jy
! Component: 200  -  total flux cleaned = 0.00964563 Jy
! Total flux subtracted in 200 components = 0.00964563 Jy
! Clean residual min=-0.005619 max=0.006135 Jy/beam
! Clean residual mean=0.000005 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.461535 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 48 components and 0.461535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077677Jy  sigma=1.379440
! Fit after  self-cal, rms=0.077654Jy  sigma=1.378902
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8164 x 2.017 at -4.146 degrees (North through East)
! Clean map  min=-0.0052371  max=0.3794 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.09     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.96     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.10     KP        0.96     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.97     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.13     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.95     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.13     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.02     OV        0.96     
!   PT        1.02     SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.12     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.96     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.12     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.02     OV        0.95     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.13     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.02     OV        0.95     
!   PT        1.05     SC        1.00     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077654Jy  sigma=1.378902
! Fit after  self-cal, rms=0.077933Jy  sigma=1.346688
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8189 mas, bmaj=2.017 mas, bpa=-4.047 degrees
! Estimated noise=0.3176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00334989 Jy
! Component: 100  -  total flux cleaned = -0.00408734 Jy
! Component: 150  -  total flux cleaned = -0.00461963 Jy
! Component: 200  -  total flux cleaned = -0.00500681 Jy
! Total flux subtracted in 200 components = -0.00500681 Jy
! Clean residual min=-0.004143 max=0.004145 Jy/beam
! Clean residual mean=-0.000005 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 0.456528 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.456528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077746Jy  sigma=1.343189
! Fit after  self-cal, rms=0.077773Jy  sigma=1.342810
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077773Jy  sigma=1.342810
! Fit after  self-cal, rms=0.077540Jy  sigma=1.326190
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8196 mas, bmaj=2.018 mas, bpa=-3.975 degrees
! Estimated noise=0.317225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00213297 Jy
! Component: 100  -  total flux cleaned = -0.00252649 Jy
! Component: 150  -  total flux cleaned = -0.00272017 Jy
! Component: 200  -  total flux cleaned = -0.00288658 Jy
! Total flux subtracted in 200 components = -0.00288658 Jy
! Clean residual min=-0.002603 max=0.002082 Jy/beam
! Clean residual mean=-0.000005 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.453642 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.453642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077464Jy  sigma=1.324862
! Fit after  self-cal, rms=0.077475Jy  sigma=1.324725
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000493252 Jy
! Component: 100  -  total flux cleaned = -0.000606609 Jy
! Component: 150  -  total flux cleaned = -0.000631005 Jy
! Component: 200  -  total flux cleaned = -0.000653618 Jy
! Total flux subtracted in 200 components = -0.000653618 Jy
! Clean residual min=-0.002392 max=0.002044 Jy/beam
! Clean residual mean=-0.000005 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.452988 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.452988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077456Jy  sigma=1.324387
! Fit after  self-cal, rms=0.077454Jy  sigma=1.324362
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077454Jy  sigma=1.324362
! Fit after  self-cal, rms=0.077659Jy  sigma=1.323733
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8197 mas, bmaj=2.018 mas, bpa=-3.937 degrees
! Estimated noise=0.317042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108038 Jy
! Component: 100  -  total flux cleaned = -0.00120234 Jy
! Component: 150  -  total flux cleaned = -0.00130699 Jy
! Component: 200  -  total flux cleaned = -0.0013781 Jy
! Total flux subtracted in 200 components = -0.0013781 Jy
! Clean residual min=-0.002188 max=0.001877 Jy/beam
! Clean residual mean=-0.000004 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.45161 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.45161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077632Jy  sigma=1.323275
! Fit after  self-cal, rms=0.077634Jy  sigma=1.323229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209896 Jy
! Component: 100  -  total flux cleaned = -0.000254781 Jy
! Component: 150  -  total flux cleaned = -0.000315629 Jy
! Component: 200  -  total flux cleaned = -0.000353899 Jy
! Total flux subtracted in 200 components = -0.000353899 Jy
! Clean residual min=-0.002091 max=0.001836 Jy/beam
! Clean residual mean=-0.000004 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.451256 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.451256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077621Jy  sigma=1.323027
! Fit after  self-cal, rms=0.077620Jy  sigma=1.323011
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077620Jy  sigma=1.323011
! Fit after  self-cal, rms=0.077698Jy  sigma=1.322900
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=6.157 mas, bpa=1.757 degrees
! Estimated noise=0.413317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00106909 Jy
! Component: 100  -  total flux cleaned = -0.00125162 Jy
! Component: 150  -  total flux cleaned = -0.00135957 Jy
! Component: 200  -  total flux cleaned = -0.00145186 Jy
! Total flux subtracted in 200 components = -0.00145186 Jy
! Clean residual min=-0.002036 max=0.001673 Jy/beam
! Clean residual mean=-0.000007 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.449804 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 90 components and 0.449804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077694Jy  sigma=1.322824
! Fit after  self-cal, rms=0.077695Jy  sigma=1.322788
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.71984e-05 Jy
! Component: 100  -  total flux cleaned = -9.92248e-05 Jy
! Component: 150  -  total flux cleaned = -0.000167958 Jy
! Component: 200  -  total flux cleaned = -0.00021509 Jy
! Total flux subtracted in 200 components = -0.00021509 Jy
! Clean residual min=-0.002048 max=0.001632 Jy/beam
! Clean residual mean=-0.000007 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.449589 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 90 components and 0.449589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077698Jy  sigma=1.322838
! Fit after  self-cal, rms=0.077697Jy  sigma=1.322810
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8196 mas, bmaj=2.017 mas, bpa=-3.928 degrees
! Estimated noise=0.316818 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8196 x 2.017 at -3.928 degrees (North through East)
! Clean map  min=-0.0018163  max=0.38184 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6367 mas, bmaj=1.606 mas, bpa=-4.834 degrees
! Estimated noise=0.601229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.287248 Jy
! Component: 100  -  total flux cleaned = 0.359955 Jy
! Component: 150  -  total flux cleaned = 0.394695 Jy
! Component: 200  -  total flux cleaned = 0.414391 Jy
! Total flux subtracted in 200 components = 0.414391 Jy
! Clean residual min=-0.005186 max=0.010912 Jy/beam
! Clean residual mean=-0.000011 rms=0.001374 Jy/beam
! Combined flux in latest and established models = 0.414391 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.414391 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8196 mas, bmaj=2.017 mas, bpa=-3.928 degrees
! Estimated noise=0.316818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165418 Jy
! Component: 100  -  total flux cleaned = 0.0249042 Jy
! Component: 150  -  total flux cleaned = 0.0294763 Jy
! Component: 200  -  total flux cleaned = 0.0320865 Jy
! Total flux subtracted in 200 components = 0.0320865 Jy
! Clean residual min=-0.002010 max=0.002101 Jy/beam
! Clean residual mean=-0.000006 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.446478 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 42 components and 0.446478 Jy
! Inverting map 
! Added new window around map position (-0.2, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180052 Jy
! Component: 100  -  total flux cleaned = 0.00215306 Jy
! Component: 150  -  total flux cleaned = 0.00240655 Jy
! Component: 200  -  total flux cleaned = 0.00256189 Jy
! Total flux subtracted in 200 components = 0.00256189 Jy
! Clean residual min=-0.001819 max=0.001665 Jy/beam
! Clean residual mean=-0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.44904 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.44904 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=6.157 mas, bpa=1.757 degrees
! Estimated noise=0.413317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407225 Jy
! Component: 100  -  total flux cleaned = 0.000471708 Jy
! Component: 150  -  total flux cleaned = 0.000483619 Jy
! Component: 200  -  total flux cleaned = 0.000494989 Jy
! Total flux subtracted in 200 components = 0.000494989 Jy
! Clean residual min=-0.002104 max=0.001682 Jy/beam
! Clean residual mean=-0.000008 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.449535 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.1e-05 Jy
! Component: 100  -  total flux cleaned = 3.1695e-05 Jy
! Component: 150  -  total flux cleaned = 5.14557e-05 Jy
! Component: 200  -  total flux cleaned = 6.06146e-05 Jy
! Total flux subtracted in 200 components = 6.06146e-05 Jy
! Clean residual min=-0.002122 max=0.001670 Jy/beam
! Clean residual mean=-0.000007 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.449595 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 66 components and 0.449595 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8196 mas, bmaj=2.017 mas, bpa=-3.928 degrees
! Estimated noise=0.316818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.14752e-05 Jy
! Component: 100  -  total flux cleaned = 9.71028e-06 Jy
! Component: 150  -  total flux cleaned = 3.26224e-05 Jy
! Component: 200  -  total flux cleaned = 5.38861e-05 Jy
! Total flux subtracted in 200 components = 5.38861e-05 Jy
! Clean residual min=-0.001792 max=0.001676 Jy/beam
! Clean residual mean=-0.000004 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.449649 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 0.449649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077681Jy  sigma=1.322498
! Fit after  self-cal, rms=0.077669Jy  sigma=1.322381
wmodel /scr/pima/bg219i_uvs/J0825-3218_X_map.mod
! Writing 76 model components to file: /scr/pima/bg219i_uvs/J0825-3218_X_map.mod
wobs /scr/pima/bg219i_uvs/J0825-3218_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0825-3218_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J0825-3218_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219i_uvs/J0825-3218_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000334027 Jy
! Component: 100  -  total flux cleaned = -0.000517543 Jy
! Component: 150  -  total flux cleaned = -0.000750005 Jy
! Component: 200  -  total flux cleaned = -0.000861403 Jy
! Component: 250  -  total flux cleaned = -0.000888821 Jy
! Component: 300  -  total flux cleaned = -0.000915052 Jy
! Component: 350  -  total flux cleaned = -0.000814268 Jy
! Component: 400  -  total flux cleaned = -0.000717117 Jy
! Component: 450  -  total flux cleaned = -0.000812334 Jy
! Component: 500  -  total flux cleaned = -0.000742302 Jy
! Component: 550  -  total flux cleaned = -0.000742507 Jy
! Component: 600  -  total flux cleaned = -0.000697734 Jy
! Component: 650  -  total flux cleaned = -0.000653829 Jy
! Component: 700  -  total flux cleaned = -0.000546116 Jy
! Component: 750  -  total flux cleaned = -0.000524842 Jy
! Component: 800  -  total flux cleaned = -0.000462497 Jy
! Component: 850  -  total flux cleaned = -0.0004824 Jy
! Component: 900  -  total flux cleaned = -0.000462375 Jy
! Component: 950  -  total flux cleaned = -0.000422927 Jy
! Component: 1000  -  total flux cleaned = -0.000423141 Jy
! Component: 1050  -  total flux cleaned = -0.000442095 Jy
! Component: 1100  -  total flux cleaned = -0.000403618 Jy
! Component: 1150  -  total flux cleaned = -0.000347377 Jy
! Component: 1200  -  total flux cleaned = -0.000347309 Jy
! Component: 1250  -  total flux cleaned = -0.000328684 Jy
! Component: 1300  -  total flux cleaned = -0.000346224 Jy
! Component: 1350  -  total flux cleaned = -0.000274395 Jy
! Component: 1400  -  total flux cleaned = -0.000292084 Jy
! Component: 1450  -  total flux cleaned = -0.000274851 Jy
! Component: 1500  -  total flux cleaned = -0.000257727 Jy
! Component: 1550  -  total flux cleaned = -0.000274837 Jy
! Component: 1600  -  total flux cleaned = -0.000241014 Jy
! Component: 1650  -  total flux cleaned = -0.000257519 Jy
! Component: 1700  -  total flux cleaned = -0.000207821 Jy
! Component: 1750  -  total flux cleaned = -0.000240542 Jy
! Component: 1800  -  total flux cleaned = -0.00024059 Jy
! Component: 1850  -  total flux cleaned = -0.000208533 Jy
! Component: 1900  -  total flux cleaned = -0.000240386 Jy
! Component: 1950  -  total flux cleaned = -0.000192861 Jy
! Component: 2000  -  total flux cleaned = -0.000193002 Jy
! Component: 2050  -  total flux cleaned = -0.000224173 Jy
! Component: 2100  -  total flux cleaned = -0.0002396 Jy
! Component: 2150  -  total flux cleaned = -0.000300391 Jy
! Component: 2200  -  total flux cleaned = -0.000270239 Jy
! Component: 2250  -  total flux cleaned = -0.000314946 Jy
! Component: 2300  -  total flux cleaned = -0.000329658 Jy
! Component: 2350  -  total flux cleaned = -0.000329599 Jy
! Component: 2400  -  total flux cleaned = -0.000314926 Jy
! Component: 2450  -  total flux cleaned = -0.000314721 Jy
! Component: 2500  -  total flux cleaned = -0.000300488 Jy
! Component: 2550  -  total flux cleaned = -0.000314826 Jy
! Component: 2600  -  total flux cleaned = -0.000328934 Jy
! Component: 2650  -  total flux cleaned = -0.00037101 Jy
! Component: 2700  -  total flux cleaned = -0.000384791 Jy
! Component: 2750  -  total flux cleaned = -0.000343408 Jy
! Component: 2800  -  total flux cleaned = -0.000398127 Jy
! Component: 2850  -  total flux cleaned = -0.000398031 Jy
! Component: 2900  -  total flux cleaned = -0.00043833 Jy
! Component: 2950  -  total flux cleaned = -0.000384725 Jy
! Component: 3000  -  total flux cleaned = -0.000358239 Jy
! Component: 3050  -  total flux cleaned = -0.000411151 Jy
! Component: 3100  -  total flux cleaned = -0.000345831 Jy
! Component: 3150  -  total flux cleaned = -0.000384816 Jy
! Component: 3200  -  total flux cleaned = -0.000397735 Jy
! Component: 3250  -  total flux cleaned = -0.000436174 Jy
! Component: 3300  -  total flux cleaned = -0.000359797 Jy
! Component: 3350  -  total flux cleaned = -0.000423197 Jy
! Component: 3400  -  total flux cleaned = -0.000423158 Jy
! Component: 3450  -  total flux cleaned = -0.000398188 Jy
! Component: 3500  -  total flux cleaned = -0.000385778 Jy
! Component: 3550  -  total flux cleaned = -0.000361175 Jy
! Component: 3600  -  total flux cleaned = -0.000324512 Jy
! Component: 3650  -  total flux cleaned = -0.000336732 Jy
! Component: 3700  -  total flux cleaned = -0.000373108 Jy
! Component: 3750  -  total flux cleaned = -0.000349027 Jy
! Component: 3800  -  total flux cleaned = -0.000337076 Jy
! Component: 3850  -  total flux cleaned = -0.000336938 Jy
! Component: 3900  -  total flux cleaned = -0.000348665 Jy
! Component: 3950  -  total flux cleaned = -0.000336918 Jy
! Component: 4000  -  total flux cleaned = -0.000325173 Jy
! Component: 4050  -  total flux cleaned = -0.000301938 Jy
! Total flux subtracted in 4096 components = -0.000301871 Jy
! Clean residual min=-0.000642 max=0.000771 Jy/beam
! Clean residual mean=-0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.449347 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 347 components and 0.449348 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0825-3218_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8196 x 2.017 at -3.928 degrees (North through East)
! Clean map  min=-0.0011135  max=0.3837 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0825-3218_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.3837 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000191498 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.149725 0.149725 0.299449 0.598899 1.1978 2.3956 4.79119 9.58238 19.1648 38.3295 76.659
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.383 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2003.68 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0825-3218_X_uvs.log closed on Wed Apr  6 23:36:56 2016