! Started logfile: /scr/pima/bg219i_uvs/J0825-3218_X_dfm.log on Thu May 19 23:10:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0825-3218_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0825-3218_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.815709 visibilities/baseline/integration-bin.
! Found source: J0825-3218
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0825-3218_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.055991Jy  sigma=19.300688
! Fit after  self-cal, rms=0.619295Jy  sigma=11.214255
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6074 mas, bmaj=1.54 mas, bpa=-4.218 degrees
! Estimated noise=0.519102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.280805 Jy
! Component: 100  -  total flux cleaned = 0.351365 Jy
! Total flux subtracted in 100 components = 0.351365 Jy
! Clean residual min=-0.013514 max=0.030736 Jy/beam
! Clean residual mean=-0.000018 rms=0.003182 Jy/beam
! Combined flux in latest and established models = 0.351365 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.351365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105564Jy  sigma=1.913387
! Fit after  self-cal, rms=0.105533Jy  sigma=1.912829
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355064 Jy
! Component: 100  -  total flux cleaned = 0.0561339 Jy
! Total flux subtracted in 100 components = 0.0561339 Jy
! Clean residual min=-0.007735 max=0.015192 Jy/beam
! Clean residual mean=-0.000012 rms=0.001783 Jy/beam
! Combined flux in latest and established models = 0.407499 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.407499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086426Jy  sigma=1.503685
! Fit after  self-cal, rms=0.086413Jy  sigma=1.503367
! Inverting map 
! Added new window around map position (0.6, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143185 Jy
! Component: 100  -  total flux cleaned = 0.0229043 Jy
! Total flux subtracted in 100 components = 0.0229043 Jy
! Clean residual min=-0.006671 max=0.009801 Jy/beam
! Clean residual mean=-0.000010 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 0.430403 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.430403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083090Jy  sigma=1.429854
! Fit after  self-cal, rms=0.082963Jy  sigma=1.426884
! Inverting map 
! Added new window around map position (-1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00951043 Jy
! Component: 100  -  total flux cleaned = 0.0154061 Jy
! Total flux subtracted in 100 components = 0.0154061 Jy
! Clean residual min=-0.005890 max=0.007636 Jy/beam
! Clean residual mean=-0.000008 rms=0.001238 Jy/beam
! Combined flux in latest and established models = 0.445809 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.445809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081610Jy  sigma=1.399493
! Fit after  self-cal, rms=0.081488Jy  sigma=1.396943
! Inverting map 
! Added new window around map position (9.8, -20).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00699708 Jy
! Component: 100  -  total flux cleaned = 0.0111595 Jy
! Total flux subtracted in 100 components = 0.0111595 Jy
! Clean residual min=-0.005049 max=0.005498 Jy/beam
! Clean residual mean=-0.000008 rms=0.001106 Jy/beam
! Combined flux in latest and established models = 0.456968 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 39 components and 0.456968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080965Jy  sigma=1.386183
! Fit after  self-cal, rms=0.080921Jy  sigma=1.384742
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8103 mas, bmaj=2 mas, bpa=-4.126 degrees
! Estimated noise=0.250594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381889 Jy
! Component: 100  -  total flux cleaned = 0.00513932 Jy
! Component: 150  -  total flux cleaned = 0.00584811 Jy
! Component: 200  -  total flux cleaned = 0.00641295 Jy
! Total flux subtracted in 200 components = 0.00641295 Jy
! Clean residual min=-0.005520 max=0.005573 Jy/beam
! Clean residual mean=-0.000003 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.463381 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.463381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080757Jy  sigma=1.379614
! Fit after  self-cal, rms=0.080748Jy  sigma=1.379286
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8103 x 2 at -4.126 degrees (North through East)
! Clean map  min=-0.0053283  max=0.37639 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.08     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.96     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.09     KP        0.96     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.96     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.12     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.95     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.11     KP        0.97     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.10     KP        0.98     
!   LA        0.99     MK        1.00     NL        1.02     OV        0.96     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.10     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.11     KP        0.98     
!   LA        1.02     MK        1.00     NL        1.02     OV        0.96     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.11     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.95     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.09     KP        0.98     
!   LA        1.02     MK        0.99     NL        1.02     OV        0.95     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.10     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.96     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.12     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.02     OV        0.97     
!   PT        1.04     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.13     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.95     
!   PT        1.02     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.080748Jy  sigma=1.379286
! Fit after  self-cal, rms=0.081307Jy  sigma=1.350484
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8141 mas, bmaj=2.003 mas, bpa=-3.982 degrees
! Estimated noise=0.251232 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00272915 Jy
! Component: 100  -  total flux cleaned = -0.0032516 Jy
! Component: 150  -  total flux cleaned = -0.00363047 Jy
! Component: 200  -  total flux cleaned = -0.0038636 Jy
! Total flux subtracted in 200 components = -0.0038636 Jy
! Clean residual min=-0.003771 max=0.003444 Jy/beam
! Clean residual mean=-0.000010 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.459518 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 61 components and 0.459518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081196Jy  sigma=1.348210
! Fit after  self-cal, rms=0.081228Jy  sigma=1.347978
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081228Jy  sigma=1.347978
! Fit after  self-cal, rms=0.081077Jy  sigma=1.334662
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8148 mas, bmaj=2.005 mas, bpa=-3.912 degrees
! Estimated noise=0.251069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00243047 Jy
! Component: 100  -  total flux cleaned = -0.00331779 Jy
! Component: 150  -  total flux cleaned = -0.00369899 Jy
! Component: 200  -  total flux cleaned = -0.0039098 Jy
! Total flux subtracted in 200 components = -0.0039098 Jy
! Clean residual min=-0.002579 max=0.002000 Jy/beam
! Clean residual mean=-0.000005 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.455608 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 76 components and 0.455608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080992Jy  sigma=1.333081
! Fit after  self-cal, rms=0.080993Jy  sigma=1.332898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000643397 Jy
! Component: 100  -  total flux cleaned = -0.000821386 Jy
! Component: 150  -  total flux cleaned = -0.000972547 Jy
! Component: 200  -  total flux cleaned = -0.00108295 Jy
! Total flux subtracted in 200 components = -0.00108295 Jy
! Clean residual min=-0.002434 max=0.001929 Jy/beam
! Clean residual mean=-0.000006 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.454525 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 80 components and 0.454525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080975Jy  sigma=1.332511
! Fit after  self-cal, rms=0.080970Jy  sigma=1.332481
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080970Jy  sigma=1.332481
! Fit after  self-cal, rms=0.081225Jy  sigma=1.331600
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8151 mas, bmaj=2.004 mas, bpa=-3.852 degrees
! Estimated noise=0.250938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152925 Jy
! Component: 100  -  total flux cleaned = -0.00215056 Jy
! Component: 150  -  total flux cleaned = -0.00234895 Jy
! Component: 200  -  total flux cleaned = -0.00247135 Jy
! Total flux subtracted in 200 components = -0.00247135 Jy
! Clean residual min=-0.002029 max=0.001817 Jy/beam
! Clean residual mean=-0.000004 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.452054 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 91 components and 0.452054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081190Jy  sigma=1.330928
! Fit after  self-cal, rms=0.081188Jy  sigma=1.330853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000407732 Jy
! Component: 100  -  total flux cleaned = -0.000495827 Jy
! Component: 150  -  total flux cleaned = -0.000554773 Jy
! Component: 200  -  total flux cleaned = -0.000609101 Jy
! Total flux subtracted in 200 components = -0.000609101 Jy
! Clean residual min=-0.001935 max=0.001791 Jy/beam
! Clean residual mean=-0.000004 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.451445 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.451445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081178Jy  sigma=1.330638
! Fit after  self-cal, rms=0.081174Jy  sigma=1.330619
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081174Jy  sigma=1.330619
! Fit after  self-cal, rms=0.081336Jy  sigma=1.330396
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.291 mas, bmaj=6.193 mas, bpa=1.859 degrees
! Estimated noise=0.32617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130569 Jy
! Component: 100  -  total flux cleaned = -0.00185896 Jy
! Component: 150  -  total flux cleaned = -0.00199331 Jy
! Component: 200  -  total flux cleaned = -0.00210623 Jy
! Total flux subtracted in 200 components = -0.00210623 Jy
! Clean residual min=-0.001885 max=0.001950 Jy/beam
! Clean residual mean=-0.000007 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.449338 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 99 components and 0.449338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081334Jy  sigma=1.330321
! Fit after  self-cal, rms=0.081334Jy  sigma=1.330272
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133522 Jy
! Component: 100  -  total flux cleaned = -0.000220599 Jy
! Component: 150  -  total flux cleaned = -0.000267461 Jy
! Component: 200  -  total flux cleaned = -0.000322534 Jy
! Total flux subtracted in 200 components = -0.000322534 Jy
! Clean residual min=-0.001832 max=0.001917 Jy/beam
! Clean residual mean=-0.000008 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.449016 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 101 components and 0.449016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081337Jy  sigma=1.330316
! Fit after  self-cal, rms=0.081335Jy  sigma=1.330296
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=2.004 mas, bpa=-3.833 degrees
! Estimated noise=0.250816 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8152 x 2.004 at -3.833 degrees (North through East)
! Clean map  min=-0.0016825  max=0.37973 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.61 mas, bmaj=1.54 mas, bpa=-3.748 degrees
! Estimated noise=0.522113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.282327 Jy
! Component: 100  -  total flux cleaned = 0.352924 Jy
! Component: 150  -  total flux cleaned = 0.387283 Jy
! Component: 200  -  total flux cleaned = 0.407538 Jy
! Total flux subtracted in 200 components = 0.407538 Jy
! Clean residual min=-0.005603 max=0.010836 Jy/beam
! Clean residual mean=-0.000010 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.407538 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.407538 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=2.004 mas, bpa=-3.833 degrees
! Estimated noise=0.250816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192169 Jy
! Component: 100  -  total flux cleaned = 0.0286649 Jy
! Component: 150  -  total flux cleaned = 0.0338034 Jy
! Component: 200  -  total flux cleaned = 0.0368254 Jy
! Total flux subtracted in 200 components = 0.0368254 Jy
! Clean residual min=-0.001933 max=0.002139 Jy/beam
! Clean residual mean=-0.000006 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.444364 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 42 components and 0.444364 Jy
! Inverting map 
! Added new window around map position (-0.2, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216456 Jy
! Component: 100  -  total flux cleaned = 0.0034095 Jy
! Component: 150  -  total flux cleaned = 0.00384561 Jy
! Component: 200  -  total flux cleaned = 0.00418062 Jy
! Total flux subtracted in 200 components = 0.00418062 Jy
! Clean residual min=-0.001756 max=0.001729 Jy/beam
! Clean residual mean=-0.000004 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.448544 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 53 components and 0.448544 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.291 mas, bmaj=6.193 mas, bpa=1.859 degrees
! Estimated noise=0.32617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027244 Jy
! Component: 100  -  total flux cleaned = 0.000348237 Jy
! Component: 150  -  total flux cleaned = 0.000381629 Jy
! Component: 200  -  total flux cleaned = 0.000396723 Jy
! Total flux subtracted in 200 components = 0.000396723 Jy
! Clean residual min=-0.001815 max=0.001868 Jy/beam
! Clean residual mean=-0.000008 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.448941 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.41136e-05 Jy
! Component: 100  -  total flux cleaned = -1.42765e-05 Jy
! Component: 150  -  total flux cleaned = -2.69996e-05 Jy
! Component: 200  -  total flux cleaned = -2.71446e-05 Jy
! Total flux subtracted in 200 components = -2.71446e-05 Jy
! Clean residual min=-0.001791 max=0.001851 Jy/beam
! Clean residual mean=-0.000008 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.448914 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.448914 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=2.004 mas, bpa=-3.833 degrees
! Estimated noise=0.250816 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.72402e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131753 Jy
! Component: 150  -  total flux cleaned = 0.000131428 Jy
! Component: 200  -  total flux cleaned = 0.000131638 Jy
! Total flux subtracted in 200 components = 0.000131638 Jy
! Clean residual min=-0.001801 max=0.001709 Jy/beam
! Clean residual mean=-0.000004 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.449046 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.449046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081327Jy  sigma=1.329916
! Fit after  self-cal, rms=0.081311Jy  sigma=1.329785
wmodel /J0825-3218_X_map.mod
! wmodel: Unable to open new model file: /J0825-3218_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0825-3218_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8152 x 2.004 at -3.833 degrees (North through East)
! Clean map  min=-0.0015129  max=0.38154 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0825-3218_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.381538 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000386952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.304257 0.304257 0.608514 1.21703 2.43405 4.86811 9.73622 19.4724 38.9449 77.8898
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.381 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  986.008 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0825-3218_X_dfm.log closed on Thu May 19 23:10:21 2016